A STUDY OF STRUCTURE AND PROPERTY CHANGES OF BIODEGRADABLE POLYGLYCOLIDE AND POLY(GLYCOLIDE-co-LACTIDE)FIBERS DURING PROCESSING AND IN VITRO DEGRADATION

Structure and properties of bioabsorbable polyglycolide (PGA) and poly(glycolide-co-lactide) (PGA-co-PLA)fibers were investigated during several industrial processing stages and in vitro degradation by means of wide-angle X-raydiffraction (WAXD), dynamic mechanical analysis (DMA) and mechanical property tests. In the orientation stage, the PGAfibers were found to have higher degrees of crystallinity than corresponding PGA-co-PLA samples produced under similarconditions. In the hot-stretching and post-annealing stages, after fibers were braided, PGA samples were found to gain morecrystallinity and higher T_g than PGA-co-PLA samples. The higher crystallinity in PGA fibers resulted in a slower rate ofdegradation. DMA results showed that a great deal of internal stress that was built during orientation and hot-stretchingstages was released in the post-annealing stage for a1l PGA and PGA-co-PLA samples. During earlier stages of in vitrodegradation, both PGA and PGA-co-PLA samples exhibited the typical cleavage-induced crystallization mechanism. Theheat shrinkage in the glass transition area was found to disappear after 6-8 days of degradation for all PGA and PGA-co-PLAsamples, indicating the amorphous portions of the polymers lost orientation after a short period in the buffer solution, mostlikely due to relaxation of the cleaved chains.

Conformational behavior of stereo regular substituted polyglycolides is side chain dependent

Substituted polyglycolides having two asymmetric centers are attractive alternatives to materials derived from petroleum because of their biocompatibility and biodegradability. The conformational behavior of various substituted polyglycolides has been investigated by both quantum mechanical and molecular dynamics approaches. Polymethylglycolide (polylactide) and polyphenylmethylglycolide in RS or SR forms are predicted to adopt 27 ribbon type structures with φ, ψ values of ±30, ±50 or +30 or +50 respectively stabilised by carbonyl-carbonyl interactions. Isopropylglycolide and isobutyl-glycolide having branching at β & γ positions respectively in their side chains can be realized in all SS form with φ, ψ values lying in right handed helical region. In addition to carbonyl-carbonyl interactions, the hydrophobic interactions between the side chains in isopropylgly-colide the C-H-O interactions also contributes to the stability. With cyclic side chains directly attached to Cα of backbone, polyphenylglycolide (polymandelide) and polycyclohexylglycolide are found to adopt left handed helical structure without hydrogen bonds in RR form, stabilised by stacking interactions and hydrophobic interactions respectively. In all the forms of polyphenylglycolide & polycyclohexylglycolide, the cyclic side chains are found to be locked into unfavourable gauche plus conformation. The stability of substituted polyglycolides has been analyzed in terms of various interactions. The carbonyl-carbonyl interactions in all the conformations of all forms of substituted polyglycolides are found to be of highly shielded parallel motif with only one short carbon-oxygen interaction. Simulation studies of substituted polyglycolides in water give a good insight of the approach of water molecules to the backbone.

Synthesis and Characterization of ABBA Block Copolymer of Glycolide and ε-Caprolactone

A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiator and stannous octanoate as a catalyst at 110 ℃ for 48 h. The molecular length of the PCL pre-polymer(BB) could be adjusted by controlling the molar ratio of the ethylene glycol initiator to ε-caprolactone monomer. The structure and the composition of the block copolymer were determined by the weight ratio of the monomer glycolide(A) to PCL pre-polymer(BB). The block copolymers were characterized by ~ 1H NMR, GPC, DSC and X-ray. The results confirm the successful synthesis of an ABBA block copolymer.

HOMOPOLYMERS AND COPOLYMERS OF GLYCOLIDE AND LACTIDE

The homopolymerization and copolymerization of glycolide (GA) and lactide (LA) are des-cribed. The resulting polymers are characterized by differential scanning calorimetry (DSC),thermogravimetric analysis (TGA), 300 MHz proton nuclear magnetic resonance spectroscopy(NMR), infrared spectroscopy, and X-ray diffraction. The rheological properties of PGA andPGLA 910 are evaluated by shear experiments. The biodegradation has been studied in vivo. Theresults show that the polyesters can be absorbed by the muscles of rabbits after 60 days.

RING OPENING POLYMERIZATION OF GLYCOLIDE

The influence of reaction temperature,reaction time, system pressure and catalysts on the re-duced viscosity(ηsp/C)and shear viscosity（ηa）of polyglycollic acid（PGA）is given in thispaper.The adequate polymerization condition of glycolide is selected according to the conditionalexperiments.The heat of polymerization and the activation energy at different conversion levelsare also measured by DSC.