Two-dimensional ATR-FTIR Spectroscopic Study on the Water Diffusion Behavior in Polyimide/Silica Nanocomposite

考虑到基于聚酰亚胺衍生物的电子器件的稳定性和性能,运用二维衰减全反射红外相关光潜研究了水在聚酰亚胺衍生物:poly(4’4- oxydiphenylene pyromellitimide)和二氧化硅的纳米高分子复合膜中的动态吸附和扩散行为．二维相关光谱区分出了三种不同氢键强度的水分子状态,同时,氢键的数量和强度还对不同状态水分子的扩散速率起了决定性的作用,和PI聚合物本身以及PI表面残留的硅酸形成氢键的水分子的扩散速度则最慢.

Preparation and characterization of polyimide/silica hybrid films

A kind of hybrid polyimide films was prepared by synthesizing poly(amic acid)/Silica matrix resin through sol-gel technique and then followed by positing it on a silex glass plate and drying at high temperature. The effect of silica content on the corona-resistant property of the films was studied. The miscibility between the organic and inorganic phases and its effect on the corona-resistant property were investigated with aminopropyltriethoxysilane, which served as a coupling agent, added into the polyimide composite system. The chemical structure and the surface morphology of the films were characterized by FTIR and AFM respectively. The corona-resistant property of the films was tested by a rod-plate electrode. It proved that the corona-resistant property was enhanced with silica content. It also turned out that the improvement of the miscibility between the two phases due to the presence of covalent force as a result of the addition of the coupling agent had, to some extent, effect on the corona-resistant property of the films. Furthermore, a theory on the corona-resistant property was put forward preliminarily.

3D Printed Polyimide/Silica Composite Aerogels for Customizable Thermal Insulation from-50℃ to 1300℃

Aerogels are widely used as thermal insulation materials because of their high porosity and low bulk density.However,the insulation performance of aerogels is limited to a narrow temperature range.Besides,the preparation of aerogel materials with precisely controlled and complex architectures is still challenging.Here,we report 3D printed polyimide/silica aerogel particle(PI/SAP)composite aerogels for thermal insulation in a wide range of temperature with customized applications.The printability and shape fidelity of 3D printed composite aerogels is improved by adding hydrophilic SAP as a rheology modifier.The resulting PI/SAP composite aerogel exhibits excellent flame-retardant properties and thermal insulation from-50℃ to 1300℃.Moreover,the PI/SAP composite aerogel with customized shape can be applied for battery insulation at subzero temperatures,promising to be used as customizable and stable insulating materials in a variety of complex and extreme applications.

Constructing high-toughness polyimide binder with robust polarity and ion-conductive mechanisms ensuring long-term operational stability of silicon-based anodes

Silicon-based materials have demonstrated remarkable potential in high-energy-density batteries owing to their high theoretical capacity.However,the significant volume expansion of silicon seriously hinders its utilization as a lithium-ion anode.Herein,a functionalized high-toughness polyimide(PDMI) is synthesized by copolymerizing the 4,4'-Oxydiphthalic anhydride(ODPA) with 4,4'-oxydianiline(ODA),2,3-diaminobenzoic acid(DABA),and 1,3-bis(3-aminopropyl)-tetramethyl disiloxane(DMS).The combination of rigid benzene rings and flexible oxygen groups(-O-) in the PDMI molecular chain via a rigidness/softness coupling mechanism contributes to high toughness.The plentiful polar carboxyl(-COOH) groups establish robust bonding strength.Rapid ionic transport is achieved by incorporating the flexible siloxane segment(Si-O-Si),which imparts high molecular chain motility and augments free volume holes to facilitate lithium-ion transport(9.8 × 10^(-10) cm^(2) s^(-1) vs.16 × 10^(-10) cm^(2) s~(-1)).As expected,the SiO_x@PDMI-1.5 electrode delivers brilliant long-term cycle performance with a remarkable capacity retention of 85% over 500 cycles at 1.3 A g^(-1).The well-designed functionalized polyimide also significantly enhances the electrochemical properties of Si nanoparticles electrode.Meanwhile,the assembled SiO_x@PDMI-1.5/NCM811 full cell delivers a high retention of 80% after 100 cycles.The perspective of the binder design strategy based on polyimide modification delivers a novel path toward high-capacity electrodes for high-energy-density batteries.

Phase field model for electric-thermal coupled discharge breakdown of polyimide nanocomposites under high frequency electrical stress

In contrast to conventional transformers, power electronic transformers, as an integral component of new energy power system, are often subjected to high-frequency and transient electrical stresses, leading to heightened concerns regarding insulation failures. Meanwhile, the underlying mechanism behind discharge breakdown failure and nanofiller enhancement under high-frequency electrical stress remains unclear. An electric-thermal coupled discharge breakdown phase field model was constructed to study the evolution of the breakdown path in polyimide nanocomposite insulation subjected to high-frequency stress. The investigation focused on analyzing the effect of various factors, including frequency, temperature, and nanofiller shape, on the breakdown path of Polyimide(PI) composites. Additionally, it elucidated the enhancement mechanism of nano-modified composite insulation at the mesoscopic scale. The results indicated that with increasing frequency and temperature, the discharge breakdown path demonstrates accelerated development, accompanied by a gradual dominance of Joule heat energy. This enhancement is attributed to the dispersed electric field distribution and the hindering effect of the nanosheets. The research findings offer a theoretical foundation and methodological framework to inform the optimal design and performance management of new insulating materials utilized in high-frequency power equipment.

3D Printed Integrated Gradient-Conductive MXene/CNT/Polyimide Aerogel Frames for Electromagnetic Interference Shielding with Ultra-Low Reflection

Construction of advanced electromagnetic interference(EMI)shielding materials with miniaturized,programmable structure and low reflection are promising but challenging.Herein,an integrated transition-metal carbides/carbon nanotube/polyimide(gradient-conductive MXene/CNT/PI,GCMCP)aerogel frame with hierarchical porous structure and gradient-conductivity has been constructed to achieve EMI shielding with ultra-low reflection.The gradient-conductive structures are obtained by continuous 3D printing of MXene/CNT/poly(amic acid)inks with different CNT contents,where the slightly conductive top layer serves as EM absorption layer and the highly conductive bottom layer as reflection layer.In addition,the hierarchical porous structure could extend the EM dissipation path and dissipate EM by multiple reflections.Consequently,the GCMCP aerogel frames exhibit an excellent average EMI shielding efficiency(68.2 dB)and low reflection(R=0.23).Furthermore,the GCMCP aerogel frames with miniaturized and programmable structures can be used as EMI shielding gaskets and effectively block wireless power transmission,which shows a prosperous application prospect in defense industry and aerospace.

Polyimides as Promising Materials for Lithium-Ion Batteries:A Review

Lithium-ion batteries(LIBs)have helped revolutionize the modern world and are now advancing the alternative energy field.Several technical challenges are associated with LIBs,such as increasing their energy density,improving their safety,and prolonging their lifespan.Pressed by these issues,researchers are striving to find effective solutions and new materials for next-generation LIBs.Polymers play a more and more important role in satisfying the ever-increasing requirements for LIBs.Polyimides(PIs),a special functional polymer,possess unparalleled advantages,such as excellent mechanical strength,extremely high thermal stability,and excellent chemical inertness;they are a promising material for LIBs.Herein,we discuss the current applications of PIs in LIBs,including coatings,separators,binders,solid-state polymer electrolytes,and active storage materials,to improve high-voltage performance,safety,cyclability,flexibility,and sustainability.Existing technical challenges are described,and strategies for solving current issues are proposed.Finally,potential directions for implementing PIs in LIBs are outlined.

Construction of all-organic low dielectric polyimide hybrids via synergistic effect between covalent organic framework and cross-linking structure

Polyimide(PI)is a promising electronic packaging material,but it remains challenging to obtain an all-organic PI hybrid film with decreased dielectric constant and loss without modifying the monomer.Herein,a series of allorganic PI hybrid films were successfully prepared by introducing the covalent organic framework(COF),which could induce the formation of the cross-linking structure in the PI matrix.Due to the synergistic effects of the COF fillers and the cross-linking structure,the PI/COF hybrid film containing 2 wt%COF exhibited the lowest dielectric constant of 2.72 and the lowest dielectric loss(tanδ)of 0.0077 at 1 MHz.It is attributed to the intrinsic low dielectric constant of COF and a large number of mesopores within the PI.Besides,the cross-linking network of PI prevents the molecular chains from stacking and improves the fraction of free volume(FFV).The molecular dynamics simulation results are well consistent with the dielectric properties data.Furthermore,the PI/COF hybrid film with 5 wt%COF showed a significant enhancement in breakdown strength,which increased to 412.8 kV/mm as compared with pure PI.In addition,the PI/COF hybrid film achieve to reduce the dielectric constant and thermal expansion coefficient(CTE).It also exhibited excellent thermal,hydrophobicity,and mechanical performance.The all-organic PI/COF hybrid films have great commercial potential as next-generation electronic packaging materials.

Highly flexible and compressible polyimide/silica aerogels with integrated double network for thermal insulation and fre-retardancy

The materials with thermal insulating and fre-retardant properties are highly demanded for architectures to improve the energy efficiency.The applications of conventional inorganic insulating materials such as silica aerogels are restricted by their mechanical fragility and organic insulating materials are either easily ignitable or exhibit unsatisfactory thermal insulation performance.Here,we report an organic/inorganic composite aerogel with integrated double network structure,in which silica constituent homogeneously distribute in the anisotropic polyimide nanofber aerogel matrix and strong interfacial effect is formed between two components.The integrated binary network endows the polyimide/silica composite aerogels with outstanding compressibility and flexibility even with a high inorganic content of 60%,which can withstand 500 cyclic fatigue tests at a compressive strain of 50%in the radial direction.The resulting composite aerogel exhibits a combination of outstanding insulating performance with a low thermal conductivity(21.2 mW m^(-1)K^(-1))and excellent resistance to a 1200℃flame without disintegration.The high-performance polyimide/silica aerogels can decrease the risk brought by the collapse of reinforced concrete structures in a fre,demonstrating great potential as efficient building materials.

A Metal-free Polyimide Photocatalyst for the Oxidation of Amines to Imines

Polyimide(PI) is an organic polymer material with good stability and diverse sources that has attracted widespread attention in the field of photocatalysis. In this study, a series of PI photocatalysts were synthesized by a thermal polymerization approach using pyromellitic dianhydride(PMDA) and various diamine monomers(melamine(MA), 4,4′-oxydianiline, and melem) as the precursors as well as different heating rates. The effects of the diamine precursor and heating rate on the structure, composition, morphology, and optical properties of the as-prepared PI materials were systematically investigated by various characterization techniques. The selective photo-oxidation of benzylamine was used as a model reaction to evaluate the photocatalytic activities of the resulting PI samples for the oxidation of amines to imines. The results revealed that the PI sample prepared using MA and PMDA as the precursors and a heating rate of 7 ℃/min(MA-PI-7) exhibited the best catalytic performance, with 98% benzylamine conversion and 98% selectivity for N-benzylidene benzylamine after 4 h of irradiation. Several benzylamine derivatives and heterocyclic amines also underwent the photo-oxidation reaction over the MA-PI-7 catalyst to afford the corresponding imines with good activity. In addition, MA-PI-7 exhibited good stability over four successive photocatalytic cycles.

Recyclability and Self-Healing of Dynamic Cross-Linked Polyimide with Mechanical/Electrical Damage

Recyclability and self-healing are two most critical factors in developing sustainable polymers to deal with environmental pollution and resource waste.In this work,a dynamic cross-linked polyimide insulation film with full closed-loop recyclability is successfully prepared,which also possesses good self-healing ability after being mechanical/electrical damaged depending on the Schiff base dynamic covalent bonds.The recycled and self-healed polyimide film still maintain its good tensile strength(r t)>60 MPa with Young’s modulus(E)>4 GPa,high thermal stability with glass transition temperature(T g)>220℃,and outstanding insulation property with breakdown strength(E 0)>358 kV mm^(-1),making it a very promising low energy consumption and high temperature resistant insulation material.The strategy of using Schiff base dynamic covalent bonds for reversible repairing the structure of high T g polyimides promotes the wider application of such sustainable and recyclable material in the field of electrical power and micro-electronics.

Novel polyimide binder for achieving high-rate capability and long-term cycling stability of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode via constructing polar and micro-branched crosslinking network structure

LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)material,as the promising cathode candidate for next-generation highenergy lithium-ion batteries,has gained considerable attention for extremely high theoretical capacity and low cost.Nevertheless,the intrinsic drawbacks of NCM811 such as unstable structure and inevitable interface side reaction result in severe capacity decay and thermal runaway.Herein,a novel polyimide(denoted as PI-Om DT)constructed with the highly polar and micro-branched crosslinking network is reported as a binder material for NCM811 cathode.The micro-branched crosslinking network is achieved by using 1,3,5-Tris(4-aminophenoxy)benzene(TAPOB)as a crosslinker via condensation reaction,which endows excellent mechanical properties and large free volume.Meanwhile,the massive polar carboxyl(-COOH)groups provide strong adhesion sites to active NCM811 particles.These functions of PIOm DT binder collaboratively benefit to forming the mechanically robust and homogeneous coating layer with rapid Li+diffusion on the surface of NCM811,significantly stabilizing the cathode structure,suppressing the detrimental interface side reaction and guaranteeing the shorter ion-diffusion and electron-transfer paths,consequently enhancing electrochemical performance.As compared to the NCM811 with PVDF binder,the NCM811 using PI-Om DT binder delivers a superior high-rate capacity(121.07 vs.145.38 m Ah g^(-1))at 5 C rate and maintains a higher capacity retention(80.38%vs.91.6%)after100 cycles at 2.5–4.3 V.Particularly,at the high-voltage conditions up to 4.5 and 4.7 V,the NCM811 with PI-Om DT binder still maintains the remarkable capacity retention of 88.86%and 72.5%after 100 cycles,respectively,paving the way for addressing the high-voltage operating stability of the NCM811 cathode.Moreover,the full-charged NCM811 cathode with PI-Om DT binder exhibits a significantly enhanced thermal stability,improving the safety performance of batteries.This work opens a new avenue for developing high-energy NCM811 based lithium-ion batteries with long cycle-life and superior safety performance using a novel and effective binder.

Direct detection redox mechanisms of polyimide electrode by EPR spectroscopy

Recently,a study reported on the use of in situ electron paramagnetic resonance(EPR)spectroscopy to investigate two consecutive single-electron processes in polyimide and directly diagnose typical electrochemical reactions of carbonyl-based organic electrode in Li-ion batteries(LIBs).This research offers the important experimental clue for studying specific electron conversion routes of multi-electron transfer reactions in LIB materials[1].

Extraordinary Ultrahigh-Capacity and Long Cycle Life Lithium-Ion Batteries Enabled by Graphitic Carbon Nitride-Perylene Polyimide Composites

Graphitic carbon nitride(g-C_(3)N_(4))is widely used in organic metal-ion batteries owing to its high porosity,facile synthesis,stability,and high-rate performance.However,pristine g-C_(3)N_(4)nanosheets exhibit poor electrical conductivity,irreversible metal-ion storage capacity,and short-term cycling owing to their high concentration of graphitic-N species.Herein,a series of 3,4:9,10-perylenetetracarboxylic diimide-coupled g-C_(3)N_(4)composite anode materials,CN-PI_(x)(x=0.2,0.5,0.75,and 1),was investigated,which exhibited an unusually high surface nitrogen content(23.19-39.92 at.%)and the highest pyridinic-N,pyrrolic-N,and graphitic-N contents reported to date.The CN-PI_(1)anode delivers an unprecedented and continuously increasing ultrahigh discharging capacity of exceeding 8400 mAh g^(-1)(1.96 mWh cm^(-2))at 100 mA g^(-1)with high specific energy density(E_(sp))of~7700 Wh kg^(-1)and the volumetric energy density(E_(v))of~14956 Wh L-1 and an excellent long-term stability(414 mAh g^(-1)or 0.579 mWh cm^(-2)at 1 A g^(-1)).Furthermore,the activation of the CN-PI_(x)electrodes contributes to their superior electrochemical performance,resulting from the fact that the Li+is not only stored in the CN-PI_(x)composites but also CN-PI_(x)activated the Li^(0)adlayer on the CN-PI_(1)-Cu heterojunction as an SEI layer to avoid the direct contact of Li^(0)phase and the electrolyte.The CN-PI_(1)full cell with LiCoO_(2)as the cathode delivers a discharge capacity of~587 mAh g^(-1)at a 1 A g^(-1)after 250 cycles with a Coulombic efficiency nearly 99%.This study provides a strategy to develop N-doped g-C_(3)N_(4)-based anode materials for realizing long-lasting energy storage devices.

Preparation and Properties of Imidazole-containing Polyimide/Silica Hybrid Films

Imidazole-containing polyimide/silica（PI/SiO2） hybrid films were prepared from 3,3＇,4,4＇-biphenyltetra- carboxylic dianhydride（BPDA） and 2,2＇-di（p-aminophenyl）-5,5＇-bibenzimidazole in N,N-dimethylacetamide（DMAc） by sol-gel method and thermal imidization. The hybrid film with high silica mass fraction up to 40% was transparent. Scanning electron microscope（SEM） and transmission electron microscope（TEM） results of the film indicate a ho- mogeneous dispersion of silica nanoparticles in the polyimide matrix. One hybrid film PI/SiO2 with 15% SiO2 exhi- bits better mechanical properties with a tensile strength of 222 MPa, an elongation at break of 12%, and a tensile modulus of 5.66 GPa. The reinforced mechanism on mechanical Drooerties was also studied.

Preparation and characterization of polyimide/silica/silver composite films

Polyimide/silica/silver hybrid films were prepared by the sol-gel method combined with in situ singlestage self-metallization technique.The structure of polyimide films in the thermal curing process and the influence of silica content on the migration and aggregation of silver particles to the surface of hybrid films were investigated.The hybrid films were characterized by transmission electron microscopy,dynamic mechanical thermal analysis,Fourier transform infrared spectroscopy,ultraviolet visible spectroscopy and mechanical measurements.The results indicated that there was no degradation of the polyimide matrix after the formation of silica and silver particles.Silica acted as the nucleus for the silver particles.With increasing silica content,more and more silver particles were kept in the hybrid films instead of beingmigrated onto the surface of the hybrid films and the reflections of hybrid films decreased gradually.

Silica-modified Pt/TiO_(2) catalysts with tunable suppression of strong metal-support interaction for cinnamaldehyde hydrogenation

Tuning Strong Metal-support Interactions(SMSI)is a key strategy to obtain highly active catalysts,but conventional methods usually enable TiO encapsulation of noble metal components to minimize the exposure of noble metals.This study demonstrates a catalyst preparation method to modulate a weak encapsulation of Pt metal nanoparticles(NPs)with the supported TiO_(2),achieving the moderate suppression of SMSI effects.The introduction of silica inhibits this encapsulation,as reflected in the characterization results such as XPS and HRTEM,while the Ti4+to Ti3+conversion due to SMSI can still be found on the support surface.Furthermore,the hydrogenation of cinnamaldehyde(CAL)as a probe reaction revealed that once this encapsulation behavior was suppressed,the adsorption capacity of the catalyst for small molecules like H_(2) and CO was enhanced,which thereby improved the catalytic activity and facilitated the hydrogenation of CAL.Meanwhile,the introduction of SiO_(2) also changed the surface structure of the catalyst,which inhibited the occurrence of the acetal reaction and improved the conversion efficiency of C=O and C=C hydrogenation.Systematic manipulation of SMSI formation and its consequence on the performance in catalytic hydrogenation reactions are discussed.

Gypsum-based Silica Gel Humidity-controlling Composite Materials:Preparation,Characterization,and Performance

Gypsum was used as substrate,and silica gel was mixed into substrate at a certain mass ratio to prepare humidity-controlling composites;moreover,the moisture absorption and desorption properties of gypsum-based composites were compared with adding different silica gel particle size and proportion.The morphological characteristics,the isothermal equilibrium moisture content curve,moisture absorption and desorption rate,moisture absorption and desorption stability,and humidity-conditioning performance were tested and analyzed.The experimental results show that,compared with pure-gypsum,the surface structure of the gypsum-based composites is relatively loose,the quantity,density and aperture of the pores in the structure increase.The absorption and desorption capacity increase along with the increase of silica gel particle size and silica gel proportion.When 3 mm silica gel particle size is added with a mass ratio of 40%,the maximum equilibrium moisture content of humidity-controlling composites is 0.161 g/g at 98% relative humidity(RH),3.22 times that of pure-gypsum.The moisture absorption and desorption rates are increased,the equilibrium moisture absorption and desorption rates are 2.68 times and 1.61 times that of pure-gypsum at 58.5% RH,respectively.The gypsum-based composites have a good stability,which has better timely response to dynamic humidity changes and can effectively regulate indoor humidity under natural conditions.

Silica nanoparticle design for colorectal cancer treatment:Recent progress and clinical potential

Colorectal cancer(CRC)is the third most common cancer worldwide and the second most common cause of cancer death.Nanotherapies are able to selectively target the delivery of cancer therapeutics,thus improving overall antitumor eff-iciency and reducing conventional chemotherapy side effects.Mesoporous silica nanoparticles(MSNs)have attracted the attention of many researchers due to their remarkable advantages and biosafety.We offer insights into the recent advances of MSNs in CRC treatment and their potential clinical application value.

New Data on Coal, Gypsum, Iron and Silica Sand Deposits and Geochemical Exploration (Pakistan): Revision of 25 Years History of Dinosaur Discoveries from Pakistan

Discoveries of many coal seams at depths by drilling carried by Geological Survey of Pakistan in Sor Range and Harnai Gochina, extended the coal seams at depth which is challenge for mine owners to exploit feasibly. Bed to bed gypsum samplings (and their chemical analyses) of huge gypsum deposits from Sulaiman foldbelt is a base for industrialist and also planers to develop cement and gypsum industries to increase export and foreign exchange for the development of area and Pakistan. Low and high grade sedimentary iron deposits, silica sand and uranium host rocks and their extensions in Sulaiman and Kirthar foldbelts are presented. Anomalies of a few base metals arise as a result of geochemical exploration carried at part of Loralai District of Balochistan. Theropod dinosaurs were frequent in India, while Poripuchian titanosaurs (Sauropoda, Dinosauria) were frequent in Pakistan. Besides some ichnotaxa, many bone taxa such as 1 titanosauriform, 14 titanosaurian sauropod (including one new titanosaur), and 3 theropod dinosaurs are established from Pakistan. Among these 12 titanosaur species and 3 theropod species are named in about 10 km2 area of Vitakri dome and 2 titanosaur species are named in about a few hundred square meter area of Mari Bohri (Kachi Bohri) which is about 10 km westward from Vitakri dome. Pakistan is a unique country which discoverd 14 diversified titanosaurs in a short area and also in a short period (67 - 66 million years ago/Ma). About 400 bones found from a few meter thick upper part of upper shale horizon of latest Maastrichtian Vitakri Formation which is base for titanosaur taxa. Cranial material is in low fraction (but include significant diverse snouts), caudal vertebrae are prominent, the cervicals, dorsals and sacrals have significant numbers, forelimb and hind limb bones have balanced fraction. Humeri, femora and tibiae are most common. To know the position of Pakistani titanosaurs among titanosaurs and sauropods, there is a need to extend list of characters for phylogenetic analyses. This broad feature list should include main characters of titanosaurs from Pakistan and also from global world.