Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by est...Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by ester exchange reaction. Aminocarboxylic acids were immobilized on the copolymer beads by the esterification of hydroxyl groups with diethyl-lenetriaminepentaacetic bisanhydride. The weak acid exchange capacities, specific surface areas and mean pore diameters of the resultant resin beads were measured.展开更多
In view of the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them, there is a need to investiga...In view of the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them, there is a need to investigate modern trends in ground improvement techniques in order to determine their reliability. This study is thus aimed at using the reliability based approach to analyze the use of polyvinyl alcohol (PVA) in combination with 1,2,3,4 Butane-tetracarboxylic acid (BTCA) for ground improvement. This study is necessary given the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them. Simplex lattice design was employed to build the design of experiment before experimental investigations were carried out on the PVA-BTCA treated soft soils. Reliability indices were computed on the basis of the 28<sup>th</sup> day unconfined compressive strength (UCS) of the treated soil. Reliability index models were developed using the Scheffe’s technique and optimized using excel solver. From analysis of results, reliability model developed proved adequate at 5% level of significance. PVA-BTCA combination provided a potential reliability or probability of success of 99.936% at components combination of: 98.4256% for soil, 1.2352% for PVA, 0.3392% for BTCA and 15.9934% for water. It was therefore recommended that financial implications of using PVA-BTCA for stabilization be compared to those of conventional methods, in order to compare their performance-cost ratio.展开更多
The emulsion polymerization of highly shear-stable copolymer dispersions of methyl methacrylate and butyl acrylate were carried out using poly (vinyl alcohol) with a thiol end group (PVA-SH) as protective colloid....The emulsion polymerization of highly shear-stable copolymer dispersions of methyl methacrylate and butyl acrylate were carried out using poly (vinyl alcohol) with a thiol end group (PVA-SH) as protective colloid. The dispersions can be transformed into corresponding redispersible powder via a spray dryingcooling process. On-line FT-IR monitoring shows that grafting polymer of PVA-g-PMMA was formed mainly at the stage-1 of the emulsion polymerization. TEM images show, the PVA-SH shell was fragmentary when adding SDS at initial stage and integrated when adding at particle growing or final stage. The particle size turns to be smaller when delayed adding SDS surfactant. Triethanolamine, a co-regulator of PVA-SH, controlled the M to 50 000-70 000 and reduced the PDI to 1.5-1.7. The acrylic dispersions with 0.8wt%-1.5wt% PVA-SH1 can be spray-dried into super dispersible polymer powder (SDPP), which can easily disperse in water and form recon- stituted dispersions with an average particle size smaller than 1 micron.展开更多
A hydrophilic/hydrophobic interpenetrating polymer network (IPN) of poly (vinyl alcohol) / polystyrene was prepared by conversion of the IPN of poly (vinyl acetate)/polystyrene. The hydrophilic/hydrophobic IPN w...A hydrophilic/hydrophobic interpenetrating polymer network (IPN) of poly (vinyl alcohol) / polystyrene was prepared by conversion of the IPN of poly (vinyl acetate)/polystyrene. The hydrophilic/hydrophobic IPN was characterized by FT-IR and DSC, and the swelling ratios of the IPN in different solvents were measured.展开更多
The polyaniline (PAn)/poly(vinyl alcohol) (PVA) conductive composite film is synthesized with perchloric acid (HClO 4) as the dopant and oxidant in reaction system by electrochemical polymerization. The result shows t...The polyaniline (PAn)/poly(vinyl alcohol) (PVA) conductive composite film is synthesized with perchloric acid (HClO 4) as the dopant and oxidant in reaction system by electrochemical polymerization. The result shows that this composite film has very high conductive properties, the maximum value of conductivity reaches 0.173 S/cm at the concentration 0.75 mol. The influences of HClO 4 on the conductivity of the composite film are investigated.In addition,the electrode reaction progress is discussed with the result that obtained from SEM and FTIR analyzing.展开更多
基金This work was supported by the National 973 project (G1999064707)
文摘Macroporous poly (vinyl acetate-co-triallyl isocyanurate) beads were prepared with suspension polymerization method. The copolymer beads were then transformed into poly (vinyl alcohol-co-triallyl isocyanurate) by ester exchange reaction. Aminocarboxylic acids were immobilized on the copolymer beads by the esterification of hydroxyl groups with diethyl-lenetriaminepentaacetic bisanhydride. The weak acid exchange capacities, specific surface areas and mean pore diameters of the resultant resin beads were measured.
文摘In view of the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them, there is a need to investigate modern trends in ground improvement techniques in order to determine their reliability. This study is thus aimed at using the reliability based approach to analyze the use of polyvinyl alcohol (PVA) in combination with 1,2,3,4 Butane-tetracarboxylic acid (BTCA) for ground improvement. This study is necessary given the challenges posed by the nature of expansive soil to structural stability which makes it necessary in some cases to improve the soils before structures can be placed on them. Simplex lattice design was employed to build the design of experiment before experimental investigations were carried out on the PVA-BTCA treated soft soils. Reliability indices were computed on the basis of the 28<sup>th</sup> day unconfined compressive strength (UCS) of the treated soil. Reliability index models were developed using the Scheffe’s technique and optimized using excel solver. From analysis of results, reliability model developed proved adequate at 5% level of significance. PVA-BTCA combination provided a potential reliability or probability of success of 99.936% at components combination of: 98.4256% for soil, 1.2352% for PVA, 0.3392% for BTCA and 15.9934% for water. It was therefore recommended that financial implications of using PVA-BTCA for stabilization be compared to those of conventional methods, in order to compare their performance-cost ratio.
文摘The emulsion polymerization of highly shear-stable copolymer dispersions of methyl methacrylate and butyl acrylate were carried out using poly (vinyl alcohol) with a thiol end group (PVA-SH) as protective colloid. The dispersions can be transformed into corresponding redispersible powder via a spray dryingcooling process. On-line FT-IR monitoring shows that grafting polymer of PVA-g-PMMA was formed mainly at the stage-1 of the emulsion polymerization. TEM images show, the PVA-SH shell was fragmentary when adding SDS at initial stage and integrated when adding at particle growing or final stage. The particle size turns to be smaller when delayed adding SDS surfactant. Triethanolamine, a co-regulator of PVA-SH, controlled the M to 50 000-70 000 and reduced the PDI to 1.5-1.7. The acrylic dispersions with 0.8wt%-1.5wt% PVA-SH1 can be spray-dried into super dispersible polymer powder (SDPP), which can easily disperse in water and form recon- stituted dispersions with an average particle size smaller than 1 micron.
基金supported by the National Natural Science Foundation of China(No.20474015)the Scientific Research Fund of Hunan Provincial Education Department(No.04A029).
文摘A hydrophilic/hydrophobic interpenetrating polymer network (IPN) of poly (vinyl alcohol) / polystyrene was prepared by conversion of the IPN of poly (vinyl acetate)/polystyrene. The hydrophilic/hydrophobic IPN was characterized by FT-IR and DSC, and the swelling ratios of the IPN in different solvents were measured.
文摘The polyaniline (PAn)/poly(vinyl alcohol) (PVA) conductive composite film is synthesized with perchloric acid (HClO 4) as the dopant and oxidant in reaction system by electrochemical polymerization. The result shows that this composite film has very high conductive properties, the maximum value of conductivity reaches 0.173 S/cm at the concentration 0.75 mol. The influences of HClO 4 on the conductivity of the composite film are investigated.In addition,the electrode reaction progress is discussed with the result that obtained from SEM and FTIR analyzing.