The Conversion of Non-Dispersed Polymers into Low-Potassium Anti-Collapse Drilling Fluids

Different drillingfluid systems are designed according to mineral composition,lithology and wellbore stability of different strata.In the present study,the conversion of a non-dispersed polymer drillingfluid into a low potas-sium anti-collapsing drillingfluid is investigated.Since the two drillingfluids belong to completely different types,the key to this conversion is represented by new inhibitors,dispersants and water-loss agents by which a non-dispersed drillingfluid can be turned into a dispersed drillingfluid while ensuring wellbore stability and reason-able rheology(carrying sand—inhibiting cuttings dispersion).In particular,the(QYZ-1)inhibitors and(FSJSS-2)dispersants are used.The former can inhibit the hydration expansion capacity of clay,reduce the dynamic shear force and weaken the viscosity;the latter can improve the sealing effect and reduce thefiltrate loss.The results have shown that after adding a reasonable proportion of these substances(QYZ-1:FSJSS-2)to the non-dispersed polymer drillingfluid,while the apparent viscosity,plastic viscosity,structural viscosity andfluidity index under-went almost negligible changes,the dynamic plastic ratio increased,and thefiltration loss decreased significantly,thereby indicating good compatibility.According to the tests(conducted in the Leijia area),the density was 1.293 g/cm3,and after standing for 24 h,the SF(static settlement factor)was 0.51.Moreover,thefiltration loss was reduced to 4.0 mL,the rolling recovery rate reached 96.92%,with excellent plugging and anti-collapse performances.

RESEARCH ON CATIONIC POLYMER WATER BASE DRILLING FLUIDS

Cationic polymer drilling fluid (CPDF) is a new water base drilling fluid in which high molecular weight (HMW) cationic polymer (CPAM) is an encapsulating and flocculating agent and organic quaternary ammonium compound (NW-1) acts as shale inhibitor. This paper describes the experimental results of cuttings recovery, particle size distribution layer spacing and Zeta potential, and discusses the inhibition of CPDF system and its major additives. The advantages of CPDF will be proved by its application in well LX-2.

Study and Application of New Polyamine Polymer Drilling Fluid

Adding the polyamine inhibitor into drilling fluid can effectively strengthen the rejection capability and improve the rheological behavior of drilling fluid system. According to the analysis of the comparison of the physiochemical properties of the polyamine inhibitor, a polyamine polymer drilling fluid system was established by means of adding UAE polyamine into traditional polymer drilling fluid. Conventional properties and environmental influence of this system have been evaluated in this paper. The result indicates that the polymer drilling fluid system optimized by polyamine shows a high-performance, such as excellent rejection performance, better rheological and filtration properties, better environmental protection functions. Thus it can be used in high water-sensitive, high temperature, high pressure or vulnerable formation drilling operations.