The recent development of polymer optical fiber (POF) at home and abroad was summarized.The special characteristics of the perfluorinated POF were introduced and its wide potential application was predicted.POF is the...The recent development of polymer optical fiber (POF) at home and abroad was summarized.The special characteristics of the perfluorinated POF were introduced and its wide potential application was predicted.POF is the most suitable in conjunction network project,especially using with quartz optical fibers.Facing this market opportunity,it is a right choice to unit colleges,research institutions and manufacture corporations to accelerate the industrialization of POF.展开更多
The density,dynamic modulus,Youngs modulus,tensile strength,extension properties,Fourier transform infrared spectrum and differential scanning calorimetry have been measured and discussed for single mode polymethyl-me...The density,dynamic modulus,Youngs modulus,tensile strength,extension properties,Fourier transform infrared spectrum and differential scanning calorimetry have been measured and discussed for single mode polymethyl-methacrylate optical fiber.The results show that the fiber can provide large strain range for polymeric optical fiber Bragg gratings.展开更多
Surface Plasmon Resonance （SPR） is a powerful technique for directly sensing in biological studies, chemical detection and environmental pollution monitoring. In this paper, we present polymer optical fiber applicat...Surface Plasmon Resonance （SPR） is a powerful technique for directly sensing in biological studies, chemical detection and environmental pollution monitoring. In this paper, we present polymer optical fiber application in SPR sensors, including wavelength interrogation surface enhanced Raman scattering SPR sensor and surface enhanced Raman scattering （SERS） probe. Long-period fiber gratings are fabricated on single mode polymer optical fiber （POF） with 120 μm period and 50% duty cycle. The polarization characteristic of this kind of birefringent grating is studied. Theoretical analysis shows it will be advantageous in SPR sensing applications.展开更多
This paper investigated the continuous measurement of a refractive index(RI)sensor based on macrobending microoptical plastic fiber(m-POF).The sensing properties of the RI sensor depend on the structure parameter,whic...This paper investigated the continuous measurement of a refractive index(RI)sensor based on macrobending microoptical plastic fiber(m-POF).The sensing properties of the RI sensor depend on the structure parameter,which is the ratio of macrobending radius of m-POF to the radius of fiber itself.The ratio changes with the measurement time increasing because of the water absorption,which introduces an maximum measurement deviation of 7.3×10^(-5) RIU when the immersion time exceeds 40 h.This work indicates that for the sensors based on POF,the measurement time must be taken into consideration for continuous measurement.展开更多
The anti-radiation mechanism of polymeric plastic fiber is analyzed. The radiation characteristic of this type fiber is studied. Our experimental results indicate that under the low radiation dosage (below 1 kGy) the ...The anti-radiation mechanism of polymeric plastic fiber is analyzed. The radiation characteristic of this type fiber is studied. Our experimental results indicate that under the low radiation dosage (below 1 kGy) the plastic optical fiber’s transmission rate rises instead of descends while this type of fiber is radiated by γ ray, electron beam and proton beam respectively. After a period of time, it gradually reaches a constant value. But under the high radiation dosage (above 1 kGy) the fiber’s transmission rate descends after radiation. Later, it gradually goes up to a constant value.展开更多
Plastic optical fibre is a serious rival to the conventional silica fibre in the huge market of local area networks. The development in polymer optical fibre is reviewed and its significance on future optical communic...Plastic optical fibre is a serious rival to the conventional silica fibre in the huge market of local area networks. The development in polymer optical fibre is reviewed and its significance on future optical communication systems is discussed. The results from our work in the development of some special polymer optical fibres are presented by which the great potential of polymer optical fibres for the construction of various optical devices is showed.展开更多
Friction plays a critical role in dexterous robotic manipulation.However,realizing friction sensing remains a challenge due to the difficulty in designing sensing structures to decouple multi-axial forces.Inspired by ...Friction plays a critical role in dexterous robotic manipulation.However,realizing friction sensing remains a challenge due to the difficulty in designing sensing structures to decouple multi-axial forces.Inspired by the topological mechanics of knots,we construct optical fiber knot(OFN)sensors for slip detection and friction measurement.By introducing localized self-contacts along the fiber,the knot structure enables anisotropic responses to normal and frictional forces.By employing OFNs and a change point detection algorithm,we demonstrate adaptive robotic grasping of slipping cups.We further develop a robotic finger that can measure tri-axial forces via a centrosymmetric architecture composed of five OFNs.Such a tactile finger allows a robotic hand to manipulate human tools dexterously.This work could provide a straightforward and cost-effective strategy for promoting adaptive grasping,dexterous manipulation,and human-robot interaction with tactile sensing.展开更多
文摘The recent development of polymer optical fiber (POF) at home and abroad was summarized.The special characteristics of the perfluorinated POF were introduced and its wide potential application was predicted.POF is the most suitable in conjunction network project,especially using with quartz optical fibers.Facing this market opportunity,it is a right choice to unit colleges,research institutions and manufacture corporations to accelerate the industrialization of POF.
文摘The density,dynamic modulus,Youngs modulus,tensile strength,extension properties,Fourier transform infrared spectrum and differential scanning calorimetry have been measured and discussed for single mode polymethyl-methacrylate optical fiber.The results show that the fiber can provide large strain range for polymeric optical fiber Bragg gratings.
基金supported by the National Basic Research Program of China under Grant No. 2006cb302905the Key Program of National Natural Science Foundation of China under Grant No. 60736037the National Natural Science Foundation of China under Grant No. 10704070
文摘Surface Plasmon Resonance （SPR） is a powerful technique for directly sensing in biological studies, chemical detection and environmental pollution monitoring. In this paper, we present polymer optical fiber application in SPR sensors, including wavelength interrogation surface enhanced Raman scattering SPR sensor and surface enhanced Raman scattering （SERS） probe. Long-period fiber gratings are fabricated on single mode polymer optical fiber （POF） with 120 μm period and 50% duty cycle. The polarization characteristic of this kind of birefringent grating is studied. Theoretical analysis shows it will be advantageous in SPR sensing applications.
基金National Natural Science Foundation of China(No.61405127)Key Program for International S&T Cooperation Projects of China(No.2013DFR10150)
文摘This paper investigated the continuous measurement of a refractive index(RI)sensor based on macrobending microoptical plastic fiber(m-POF).The sensing properties of the RI sensor depend on the structure parameter,which is the ratio of macrobending radius of m-POF to the radius of fiber itself.The ratio changes with the measurement time increasing because of the water absorption,which introduces an maximum measurement deviation of 7.3×10^(-5) RIU when the immersion time exceeds 40 h.This work indicates that for the sensors based on POF,the measurement time must be taken into consideration for continuous measurement.
文摘The anti-radiation mechanism of polymeric plastic fiber is analyzed. The radiation characteristic of this type fiber is studied. Our experimental results indicate that under the low radiation dosage (below 1 kGy) the plastic optical fiber’s transmission rate rises instead of descends while this type of fiber is radiated by γ ray, electron beam and proton beam respectively. After a period of time, it gradually reaches a constant value. But under the high radiation dosage (above 1 kGy) the fiber’s transmission rate descends after radiation. Later, it gradually goes up to a constant value.
文摘Plastic optical fibre is a serious rival to the conventional silica fibre in the huge market of local area networks. The development in polymer optical fibre is reviewed and its significance on future optical communication systems is discussed. The results from our work in the development of some special polymer optical fibres are presented by which the great potential of polymer optical fibres for the construction of various optical devices is showed.
基金grateful for financial supports from National Natural Science Foundation of China(61975173)China Postdoctoral Science Foundation(2022M722907,2022M722909)+2 种基金Zhejiang Provincial Natural Science Foundation of China(LQ23F010015)Key Research and Development Project of Zhejiang Province(2021C05003)Major Scientific Research Project of Zhejiang Lab(2019MC0AD01).
文摘Friction plays a critical role in dexterous robotic manipulation.However,realizing friction sensing remains a challenge due to the difficulty in designing sensing structures to decouple multi-axial forces.Inspired by the topological mechanics of knots,we construct optical fiber knot(OFN)sensors for slip detection and friction measurement.By introducing localized self-contacts along the fiber,the knot structure enables anisotropic responses to normal and frictional forces.By employing OFNs and a change point detection algorithm,we demonstrate adaptive robotic grasping of slipping cups.We further develop a robotic finger that can measure tri-axial forces via a centrosymmetric architecture composed of five OFNs.Such a tactile finger allows a robotic hand to manipulate human tools dexterously.This work could provide a straightforward and cost-effective strategy for promoting adaptive grasping,dexterous manipulation,and human-robot interaction with tactile sensing.
