The thermal induced topography change in a model system consisting of a polymer film on a Si substrate capped by a thin metal layer has been studied by using AFM. Regular lateral patterns over large areas were observ...The thermal induced topography change in a model system consisting of a polymer film on a Si substrate capped by a thin metal layer has been studied by using AFM. Regular lateral patterns over large areas were observed on the surface when the system was heated to a sufficiently high temperature. 2D-FFT analysis to the AFM images indicates that the patterns are isotropic and have well defined periodicities. The periodicities of the characteristic patterns are found to depend strongly on the annealing temperature. The study of the kinetics of the formation reveals that such a topography forms almost instantaneously once the critical temperature is reached. It is suggested that this wave-like surface morphology is driven by the thermal expansion coefficient mismatch of the different layers. This method for generating regular wave-like patterns could be used as a general method for patterning various organic materials into micro/nanostructures.展开更多
Polymer thin film deposition using an atmospheric pressure micro-plasma jet driven by dual-frequency excitations is described in this paper. The discharge process was operated with a mixture of argon （6 slm） and a s...Polymer thin film deposition using an atmospheric pressure micro-plasma jet driven by dual-frequency excitations is described in this paper. The discharge process was operated with a mixture of argon （6 slm） and a small amount of acetone （0-2100 ppm）. Plasma composition was measured by optical emission spectroscopy （OES）. In addition to a large number of Ar spectra lines, we observed some spectra of C, CN, CH and C2. Through changing acetone content mixed in argon, we found that the optimum discharge condition for deposition can be characterized by the maximum concentration of carbonaceous species. The deposited film was characterized by scanning electron microscopy （SEM） and X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The XPS indicated that the film was mostly composed of C with trace amount of O and N elements. The FTIR suggested different carbon-containing bonds （-CHx, C=O, C=C, C-O-C） presented in the deposited film.展开更多
A simple setup for the measurement of transmission loss in polymer thin film optical waveguides is described. A new electro-optic polymer film has been prepared. The transmission loss of the film is measured before an...A simple setup for the measurement of transmission loss in polymer thin film optical waveguides is described. A new electro-optic polymer film has been prepared. The transmission loss of the film is measured before and after corona poling. And the loss is determined to be 1.84 dB/cm and 2.14 dB/cm, respectively.展开更多
An efficient interface modification is introduced to improve the performance of polymeric thin film transistors. This efficient interface modification is first achieved by 4-fluorothiophenol（4-FTP） self-assembled mo...An efficient interface modification is introduced to improve the performance of polymeric thin film transistors. This efficient interface modification is first achieved by 4-fluorothiophenol（4-FTP） self-assembled monolayers（SAM） to chemically treat the silver source–drain（S/D） contacts while the silicon oxide（SiO2） dielectric interface is further primed by either hexamethyldisilazane（HMDS） or octyltrichlorosilane（OTS-C8）. Results show that contact resistance is the dominant factor that limits the field effect mobility of the PTDPPTFT4 transistors. With proper surface modification applied to both the dielectric surface and the bottom contacts, the field effect mobilities of the bottom-gate bottom-contact PTDPPTFT4 transistors were significantly improved from 0.15 cm^2·V^-1·s^-1 to 0.91 cm^2·V^-1·s^-1.展开更多
Thin-film composite(TFC) reverse osmosis(RO) membranes are playing the dominating role in desalination.Tremendous efforts have been put in the studies on the polyamide selective layers. However, the effect of the subs...Thin-film composite(TFC) reverse osmosis(RO) membranes are playing the dominating role in desalination.Tremendous efforts have been put in the studies on the polyamide selective layers. However, the effect of the substrate layers is far less concerned. In this review, we summarize the works that consider the impacts of the substrates, including pore sizes, surface hydrophilicity, on the processes of interfacial polymerization and consequently on the morphologies of the active layers and on final RO performances of the composite membranes. All the works indicate that the pore sizes and surface hydrophilicity of the substrate evidently influence the RO performances of the composite membranes. Unfortunately, we find that the observations and understandings on the substrate effect are frequently varied from case to case because of the lack of substrates with uniform pores and surface chemistries. We suggest using track-etched membranes or anodized alumina membranes having relatively uniform pores and functionalizable pore walls as model substrates to elucidate the substrate effect.Moreover, we argue that homoporous membranes derived from block copolymers have the potential to be used as substrates for the large-scale production of high-performances TFC RO membranes.展开更多
文摘The thermal induced topography change in a model system consisting of a polymer film on a Si substrate capped by a thin metal layer has been studied by using AFM. Regular lateral patterns over large areas were observed on the surface when the system was heated to a sufficiently high temperature. 2D-FFT analysis to the AFM images indicates that the patterns are isotropic and have well defined periodicities. The periodicities of the characteristic patterns are found to depend strongly on the annealing temperature. The study of the kinetics of the formation reveals that such a topography forms almost instantaneously once the critical temperature is reached. It is suggested that this wave-like surface morphology is driven by the thermal expansion coefficient mismatch of the different layers. This method for generating regular wave-like patterns could be used as a general method for patterning various organic materials into micro/nanostructures.
基金supported by National Natural Science Foundation of China(No.11165012)China Postdoctoral Science Foundation Funded Project(2011M501494+2 种基金2012T50831)Project of Key Laboratory of Atomic and Molecular Physics&Functional Materials of Gansu ProvinceProject of Northwest Normal University(NWNU-LKQN-11-9)
文摘Polymer thin film deposition using an atmospheric pressure micro-plasma jet driven by dual-frequency excitations is described in this paper. The discharge process was operated with a mixture of argon （6 slm） and a small amount of acetone （0-2100 ppm）. Plasma composition was measured by optical emission spectroscopy （OES）. In addition to a large number of Ar spectra lines, we observed some spectra of C, CN, CH and C2. Through changing acetone content mixed in argon, we found that the optimum discharge condition for deposition can be characterized by the maximum concentration of carbonaceous species. The deposited film was characterized by scanning electron microscopy （SEM） and X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The XPS indicated that the film was mostly composed of C with trace amount of O and N elements. The FTIR suggested different carbon-containing bonds （-CHx, C=O, C=C, C-O-C） presented in the deposited film.
文摘A simple setup for the measurement of transmission loss in polymer thin film optical waveguides is described. A new electro-optic polymer film has been prepared. The transmission loss of the film is measured before and after corona poling. And the loss is determined to be 1.84 dB/cm and 2.14 dB/cm, respectively.
基金Project supported by the National Basic Research Program of China(Grant No.2013CB328803)
文摘An efficient interface modification is introduced to improve the performance of polymeric thin film transistors. This efficient interface modification is first achieved by 4-fluorothiophenol（4-FTP） self-assembled monolayers（SAM） to chemically treat the silver source–drain（S/D） contacts while the silicon oxide（SiO2） dielectric interface is further primed by either hexamethyldisilazane（HMDS） or octyltrichlorosilane（OTS-C8）. Results show that contact resistance is the dominant factor that limits the field effect mobility of the PTDPPTFT4 transistors. With proper surface modification applied to both the dielectric surface and the bottom contacts, the field effect mobilities of the bottom-gate bottom-contact PTDPPTFT4 transistors were significantly improved from 0.15 cm^2·V^-1·s^-1 to 0.91 cm^2·V^-1·s^-1.
基金Supported by the National Basic Research Program of China(2015CB655301)the Natural Science Foundation of Jiangsu Province(BK20150063)the Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘Thin-film composite(TFC) reverse osmosis(RO) membranes are playing the dominating role in desalination.Tremendous efforts have been put in the studies on the polyamide selective layers. However, the effect of the substrate layers is far less concerned. In this review, we summarize the works that consider the impacts of the substrates, including pore sizes, surface hydrophilicity, on the processes of interfacial polymerization and consequently on the morphologies of the active layers and on final RO performances of the composite membranes. All the works indicate that the pore sizes and surface hydrophilicity of the substrate evidently influence the RO performances of the composite membranes. Unfortunately, we find that the observations and understandings on the substrate effect are frequently varied from case to case because of the lack of substrates with uniform pores and surface chemistries. We suggest using track-etched membranes or anodized alumina membranes having relatively uniform pores and functionalizable pore walls as model substrates to elucidate the substrate effect.Moreover, we argue that homoporous membranes derived from block copolymers have the potential to be used as substrates for the large-scale production of high-performances TFC RO membranes.
