Cellulose-based Polymeric Liquid Crystals as a Biomimetic Modifier for Suppressing Protein Adsorption

A novel biomimetic protein-resistant modifier based on cellulose-based polymeric liquid crystals was described（PLCs）. Two types of PLCs of propyl hydroxypropyl cellulose ester（PPC） and octyl hydroxypropyl cellulose ester（OPC） were prepared by esterification from hydroxypropyl cellulose, and then were mixed with polyvinyl chloride and polyurethane to obtain composite films by solution casting, respectively. The surface morphology of PLCs and their composite films were characterized by polarized optical microscopy（POM） and scanning electron microscopy（SEM）, suggesting the existence of microdomain separation with fingerprint texture in PLC composite films. Water contact angle measurement results indicated that hydrophilicity of PLC/polymer composite films was dependent on the type and content of PLC as well as the type of matrix due to their interaction. Using bovine serum albumin（BSA） as a model protein, protein adsorption results revealed that PLCs with protein-resistant property can obviously suppress protein adsorption on their composite films, probably due to their flexible LC state. Moreover, all PLCs and their composites exhibited non-toxicity by MTT assay, suggesting their safety for biomedical applications.

PREPARATION OF POLYMER DISPERSED LIQUID CRYSTALS USING PHOTOPOLYMERIZATION

2-Hydroxyethyl methacrylate (HEMA) and styrene copolymers are prepared by photopolymerization. The electrooptical behavior and microstructure of the polymer dispersed liquid crystal films are investigated by using He-Ne laser and scanning electron microscopy, respectively. With increasing E7 content in the copolymer, droplet size increased, threshold voltage decreased.

Self-assembly and UV-curing Property of Polymerized Lyotropic Liquid Crystal Monomer of Sodium 3,4,5-tris（ll-acryloxyundecyloxy）benzoate

A polymerized lyotropic liquid crystal monomer of sodium 3,4,5-tris（11-acryloxyundecyloxy）- benzoate was synthesized by a convenient route starting from 3,4,5-trihydroxybenzoic acid via esterification followed by etherification, acylation and finally neutralization. The chemi- cal structure was confirmed by Fourier transform infrared （FT-IR） and 1H nuclear magnetic resonance spectral analysis. The self-organization behavior of the monomer with deionized water in methanol at room temperature was also demonstrated. The assemblies were char- acterized by polarized optical microscope and X-ray diffraction. The results show that a solution containing 80：20 of the monomer to water was found to be able to self-organize into Lamellar （La） phase and 92：8 with inverted hexagonal （H]I） phase, which was in ac- cordance with the theoretical calculation of critical packing parameter. It suggests that the concentration of the monomer was the key factor to influence assembly structure. Addi- tionally, the acrylate conversion with different photoinitiators and nanostructure retention after polymerization were investigated. The research shows that the acrylate conversion of the monomer with Darocur2959 could reach up to 78% when irradiated by 30 mW/cm2 UV light of 365 nm for 30 min characterized by Real-time FT-IR as well as the sol-gel method. Meanwhile, the La and HII phase nanostructures were both retained after polymerization.

Electrically tunable holographic polymer templated blue phase liquid crystal grating

In this paper, we demonstrate an alternative approach to fabricating an electrically tunable holographic polymer tem- plated blue phase liquid crystal grating. This grating is obtained by preforming a polymer template comprised of periodic fringes, and then refilling it with a blue phase liquid crystal. Compared with conventional holographic polymer dispersed liquid crystal gratings, our grating can remarkably reduce its switching voltage from 200 V to 43 V while maintaining a sub-millisecond response time. The holographic polymer templated blue phase liquid crystal （HPTBPLC） grating is free from electrode patterning, thus leading to a lower cost and more flexible applications.

"LIVING" FREE RADICAL SYNTHESIS OF NOVEL RODCOIL DIBLOCK COPOLYMERS WITH POLYSTYRENE AND MESOGEN-JACKETED LIQUID CRYSTAL POLYMER SEGMENTS

The synthesis of rod-coil diblock copolymers was achieved for the first time by TEMPO-mediated 'living' free radical polymerization of styrene and 2,5-bis [(4-methoxyphenyl)oxycarbonyl] styrene(MPCS). The block architecture of the two diblock copolymers thus prepared, MPCS-b-St(5400/2400) and MPCS-b-St(10800/8700), was confirmed by GPC, DSC studies and the formation of multimolecular micelles. (Author abstract) 10 Refs.

Kinetics investigations for holographic Bragg grating based on polymer dispersed liquid crystal

This paper investigates the monomer kinetics of polymer dispersed liquid crystal （PDLC） grating. Fourier transform infrared （FTIR） spectra are used in the studies of photoreaction kinetics. The results indicate that there is a relative stable stage arises after a very short initial stage. Based on FTIR studies, the monomer diffusion equation is deduced and necessary numerical simulations are carried out to analyse the monomer conversion which is an important point to improve phase separation structure of PDLC grating. Some simulation results have a good agreement with experimental data. In addition, the effects induced by monomer diffusion constant D and diffusion-polymerization-ratio rate R are discussed. Results show that monomer conversion can be improved by increasing value of D. Besides, a good equilibrium state （R = 1） is more beneficial to the diffusion of monomer which is important in the process of phase separation.

STUDY ON LIQUID CRYSTAL POLYMERS WITH TWO-DIMENSIONAL MESOGENIC UNITS

A series of liquid crystalline polymers with two-dimensional mesogenic units were synthesized by solution polycondensation at low temperature. All the polymers were liquid crystalline. The melting temperature T;（except that with substituent of methoxy） and the clearing temperature T;of the polymers change regularly with varying of the length of the alkyl substituent groups.

SYNTHESIS OF A NOVEL "MESOGEN-JACKETED LIQUID CRYSTAL POLYMER" BASED ON VINYLTEREPHTHALIC ACID

Poly{2,5-bis[(p-methoxyphenyl)oxycarbonyl]styrene}was successfully synthesized.This new polymer has a structure characteristic of mesogen-jacketed liquid cyrstalline polymers(MJLCPs)and does form a liquid crystal phase above its glass transition.It thus became the starting member of a new series of MJLCPs.The synthesis of the polymer as well as the liquid crystalline properties of the polymer and its monomer was discussed.A brief comparison of the new monomer and polymer with some previously reported counterparts was also included.

Effect of Polymer Network Morphology on the Performance of Polymer Dispersed Liquid Crystal (PDLC) Composite Films

The effects of the morphologies of liquid crystal (LC) droplets left in polymer network on the performance of polymer dispersed liquid crystal composite films were investigated.By adjusting the relative content range of the crosslinking and diluents,the morphologies of polymer network can be changed.Therefore,the properties of PDLC composite films with imparity polymer morphologies were obtained by experiments and the finite element simulation.Results of the experimental and finite element simulation showed that the electro-optical properties of PDLC composite films were inversely proportional to the domain size of the polymer network and the mechanical properties were proportional to the domain size of the polymer network.

NITROXIDE-MEDIATED FREE RADICAL SYNTHESIS OF MESOGEN-JACKETED LIQUID CRYSTAL POLYMERS

The first TEMPO-mediated 'living' free radical polymerization of liquid crystalline monomer, 2, 5-bis[(4-methoxyphenyl)oxycarbonyl]styrene (MPCS), was carried out at 130 degrees C with BPO as an initiator. The molecular weight of the polymer can be varied from rather low values to high values while maintaining narrow polydispersity. It was observed that the polymerization of MPCS proceeded much faster than that of styrene. A tentative explanation for this fast polymerization was suggested.

STUDY ON MAGNETIC FIELD-INDUCED 0RIENTATI0N OF A CHIRAL SIDE-CHAIN LIQUID CRYSTAL POLYACRYLATE USING INFRARED DICHROISM

Magnetic field-induced orientation of a chiral side chain liquid crystalline polyacrylate(P-11) was studied by using IR dichroism. For the investigated P-11, it has been shown thatthe magnetic alignment takes place over the entire temperature range between its meltingpoint and clearing point and the orientation level is strongly temperature-dependent, thedevelopment with time of the magnetic orieatation follows an exponeotial-type relation,and the smectic phase state influences the thermal relaxation process in the absence of themagnetic field.

SYNTHESIS AND CHARACTERIZATION OF MAIN CHAIN AROMATIC LIQUID CRYSTAL COPOLYESTERS WITH X-SHAPED AND ROD-SHAPED MESOGENIC UNITS

A series of main chain liquid crystal aromatic copolyesters with X-shaped and rod-shaped mesogenic units were synthesized via solution condensation polymerizations of 4,4'-(alpha,omega-octanedioyloxy)-dibenzoyl dichlorides with 2,5-bis(p-octanoxy benzoyloxy)-hydroquinone and diphenol. All of the copolyesters showed thermotropic liquid crystalline behaviors through observations using DSC, polarized microscopy and X-ray diffraction. The melting point (T-m) and the isotropization temperature (T-i) change regularly with varying the content of diphenol unit in the copolymers.

SYNTHESIS AND CHARACTERIZATION OF LIQUID CRYSTAL POLYMERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNITS (Ⅱ)

A series of liquid crystalline polymers with T-shaped two-dimensional mesogenic unitswere synthesized via low temperature solution polycondensation of 2-(4'-alkoxy-phenyl)hydroquinone with various diacyl dichlorides. The polymers were found to be nematic andshown thermotropic liquid crystalline behaviors through observations using DSC, polarizedmicroscopy and X-ray diffraction. The melting temperature T_m and the isotropizationtemperature T_i of the polymers change regularly with varying of the monomer structures.

SYNTHESIS AND PROPERTIES OF LIQUID CRYSTAL POLYSILOXANES WITH MESOGENIC STILBENE SIDE GROUPS

A variety of mesomorphic side-chain polysiloxanes were synthesized by using hydrosilylation reaction with dicyclopentadienylplatinum(II) (DPPC) as the catalyst. The mesogenic groups are derivatives of stilbene with cyano or nitro tail groups. The products were characterized by DSC, X-ray diffraction and polarizing optical microscopy (POM). All the polymers were found to have relatively low T-g and can form a smectic liquid crystal phase.

SYNTHESIS AND CHARACTERIZATION OF LIQUID CRYSTAL POLYMERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNITS

Two series of new liquid crystalline polymers with T-shaped two-dimensional mesogenic units were synthesized by low temperature solution polycondensations of 4-substituted N-2, 5-dihydroxybenzylidene aniline monomers with different diacyl dichlorides. The polymers were found to be nematic and shown liquid crystalline behavior. The melting temperature T-m and the clearing temperature T-i of the polymers change regularly with varying of the monomer structures.

Nonlinear Liquid Crystal Polymer and Its Applications

The transparent solid medium of a thermotropic liquid crystal polymer have a comb structure of mesogenic side chains which exhibit a nonlinear optical response of electronic origin.The main chain of the liquid crystal polymers can be selected from a number of suitable polymerized monomeric and comonomeric structures such as polyvinyl,polysiloxane,polyoxyalkylene, polyester etc.The electrooptic light modulator is provided,which have potential to using in the systems of laser modulation and deflection,and information control in optical circuitry etc.

Random lasing in dye-doped polymer dispersed liquid crystal film

A dye-doped polymer-dispersed liquid crystal film was designed and fabricated,and random lasing action was studied.A mixture of laser dye,nematic liquid crystal,chiral dopant,and PVA was used to prepare the dye-doped polymer-dispersed liquid crystal film by means of microcapsules.Scanning electron microscopy analysis showed that most liquid crystal droplets in the polymer matrix ranged from 30 μm to 40 μm,the size of the liquid crystal droplets was small.Under frequency doubled 532 nm Nd：YAG laser-pumped optical excitation,a plurality of discrete and sharp random laser radiation peaks could be measured in the range of 575–590 nm.The line-width of the lasing peak was 0.2 nm and the threshold of the random lasing was 9 m J.Under heating,the emission peaks of random lasing disappeared.By detecting the emission light spot energy distribution,the mechanism of radiation was found to be random lasing.The random lasing radiation mechanism was then analyzed and discussed.Experimental results indicated that the size of the liquid crystal droplets is the decisive factor that influences the lasing mechanism.The surface anchor role can be ignored when the size of the liquid crystal droplets in the polymer matrix is small,which is beneficial to form multiple scattering.The transmission path of photons is similar to that in a ring cavity,providing feedback to obtain random lasing output.

Fullerene solar cells with cholesteric liquid crystal doping

This paper reports the doping effect of cholesteric liquid crystal 3β-Hydroxy-5-cholestene 3-oleate on polymer solar cells composed of the poly 3-hexyl thiophene and the fullerene derivative.With a doping ratio of 0.3 wt%,the device achieves an ideal improvement on the shunt resistor and the fill factor.Compared with the reference cell,the power conversion efficiency of the doped cell is improved 24%.The photoelectric measurement and the active layer characterization indicate that the self-assembly liquid crystal can improve the film crystallization and reduce the membrane defect.

A selective reflecting film with a temperature-dependent pitch length

A(polymer network/liquid crystal/chiral dopants) composite exhibiting a temperature-sensing switch of infrared spectrum has been developed.Because of the different change of the chiral dopant in the helical twisting power and the anchoring effect of the polymer network,the polymer stabilized liquid crystal(PSLC) films,of which the bandwidth of the selective reflection spectra increased with changing temperature,were obtained.