Preparation and Effectiveness of Slow-release Polymeric Fertilizer Containing Multiple Nutrients Special for Maize

Slow-release polymeric fertilizer containing multiple nutrients was synthesized through condensation polymerization from raw materials of homemade low-molecular urea-formaldehyde and the compounds of potassium dihydrogen phosphate and phosphoric acid. Adjustment of the proportion of raw materials makes the ingredients of the fertilizer are N:P_2O_5:K_2O =1:0.75:0.13, which satisfy the nutritional requirement for maize growth. Field-experiment results prove that the yield of maize increases by 16.56% when using the polymeric fertilizer special for maize alone, by 56.51% when applying the polymeric fertilizer special for maize plus farmyard manure, and by 49.11% when applying the SV fertilizer special for maize plus manure.

Effect of Slow and Controlled Release Fertilizers on the Yield and Nutrient Use Efficiency of Hot Pepper in Qiu-bei

[Objective] The aim of this study was to investigate the impacts of slow and controlled release fertilizers（SCRF）on the yield of qiubei hot pepper,its nutrient use efficiency and environment.[Method] Using Qiubei hot pepper（Capsicum frutescens L.）as the experimental material,we studied the fertilization effect and environment-protecting effect of SCRF.[Result] The result showed that SCRF could improve the agronomic characteristics of hot pepper.Compared to singly applied common fertilizers,SCRF increased economic yield by 20.90% and economic benefit by 13 234.35 Yuan/hm2,and the ratio of output to input was improved by 47.93%.In comparison with common straight fertilizers at same NPK proportion and rate,SCRF increased economic yield by 5.26% and economic benefit by 5 554.80 Yuan/hm2,and the ratio of output to input was improved by 9.91%.Under the reduced use of SCRF by 20%,SCRF increased economic yield by 12.38% and economic benefit by 9595.20 Yuan/hm2 compared with singly applied common fertilizers,and the ratio of output to input was improved by 65.95%.SCRF improved nitrogen,phosphorus and potassium use efficiencies by 12.42-17.53,3.35-5.24 and 5.37-14.02 percents respectively.[Conclusion] As the result of much reduced N and P application rates,SCRF would significantly economize fertilizer resources and minimize the pollution caused by the loss of fertilizer nutrients,which is of practical importance for environment protection.

Preliminary Discussion on Research Progress and Prospect of Slow Released Fertilizers

Slow/controlled release fertilizers （SRFs/CRFs） have been paid more at- tentions by the researchersin recent years. In this paper, the application effects and methods, types, current problem and development prospect of SRFs/CRFsboth at home and abroad were reviewed. The production principles and processes of urea- formaldehyde slow release fertilizers were introduced; and It is suggested that the urea-formaldehyde slow release fertilizers show great development to ease energy and environment pressure.

Effects of Slow Release Fertilizer on the Yield and Nutrient Use Efficiency of Carnation and Its Environmental Protection Effect

[Objective] The aim was to study the effects of slow release fertilizer on the yield,economic benefit and nutrient use efficiency of carnation and environmental pollution.[Method] Taking carnation（Dianthus caryophyllus）as research object,the application effect and environmental protection effect of slow release fertilizer on carnation were discussed through field plot test.[Result] The main agronomic characters of carnation improved after the application of slow release fertilizer;compared with Conv-F treatment,the yield of carnation with slow release fertilizer increased by 18.67%-20.83%,and its economic benefit increased by 105 500 yuan/hm2,while the ratio of output to input improved by 74.29%;under the same NPK ratio and nutrient amount,the yield,economic benefit and ratio of output to input of carnation after the application of slow release fertilizer increased by 2.11%,14 800 yuan and 16.2%,respectively;besides,the application of slow release fertilizer improved the nutrient use efficiency of carnation,and N,P and K nutrient use efficiency in Opt-F-0.7% treatment increased by 13.88%,8.57% and 30.14% compared with Conv-F treatment.[Conclusion] Slow release fertilizer could not only reduce the waste of fertilizer resources and improve fertilizer use efficiency but also decrease the pollution caused by nutrient loss,which had important practical significance for protecting ecological environment and promoting the sustainable development of agriculture.

Application Effect of Water-absorbent Slow Release Nitrogen Fertilizer in Latosol

[Objective] A new-type water-absorbent slow release nitrogen fertilizer（WASRNF） was produced through polymerization reaction. Its physicochemical property and application effect in latosol were studied. Feasibility of using WASRNF to improve the serious problems of latosol in rubber planting area in Hainan Island including vulnerable nutrient, free-running fertilizer and water was studied. [Result] The results showed that raw materials of WASRNF, urea and water-retention material formed co-polymer through hydrogen-bond interaction that the WASRNF contained many hydrophilic groups. The p H value of WASRNF is near neutral and its water absorbent rate in tap water could reach 167.17 g·g-1. The water absorbent rates in latosol leach liquors with water/soil ratios of 1：5, 1：10 and 1：20 were 104.66, 122.93 and 145.38 g·g^-1, respectively. The maximum water holding ratio of latosol increased by 23.72%, 30.89% and 39.68% when 0.5%, 1% and 2% WASRNFs were added to latosol, and water evaporation rate of latosol decreased efficiently. Compared with common urea, WASRNF could slow down the leaching rate of nitrogen and the initial leaching amount was only 22.17% of the total amount. [Conclusion]The results indicated that WASRNF in latosol had strong water absorption and water-retention abilities in addition to the good slow release effect, and could efficiently decrease nutrient loss, increase utilization ratio of water and fertilizer and promote interaction between water and fertilizer.

Effects of slow or controlled release fertilizer types and fertilization modes on yield and quality of rice

There is limited information about the influence of slow or controlled release fertilizer（S/CRF） on rice yield and quality. In this study, japonica rice cultivar Nanjing 9108 was used to study the effects of three different S/CRFs（polymer-coated urea（PCU）, sulfur-coated urea（SCU）, and urea formaldehyde（UF）） and two fertilization modes（both S/CRF and common urea（CU） as basal fertilizer, S/CRF as basal and CU as tillering fertilizer） on rice yield and quality. CU only was applied separately as control（CK）. Results showed that, rice grain yield, chalky kernel rate, chalky area, overall chalkiness, and the content of gliadin, glutenin, and protein, all showed the trends of UF〉PCU〉SCU within the same fertilization mode, and showed the trends of S/CRF as basal and CU as tillering fertilizer〉both S/CRF and CU as basal fertilizer within the same type of S/CRF. In contrast, the contents of amylose, amylopectin, and starch, as well as taste value, and peak and hot viscosity showed trends of SCU〉PCU〉UF, and the trends of both S/CRF and CU as basal fertilizer〉S/CRF as basal and CU as tillering fertilizer. Among S/CRF treatments and fertilization modes, taste values of cooked rice were positively correlated with amylose, amylopectin, and starch contents, as well as gel consistency, peak viscosity, hot viscosity, and cool viscosity, while negatively correlated with globulin, gliadin, glutenin, and protein contents. The types of S/CRF and fertilization modes are important for improving rice yield and quality. Compared to CK, higher yield and similar quality of rice was achieved with UF as basal and CU as tillering fertilizer, and similar yield with improved appearance and eating and cooking quality of rice was achieved with either both UF and CU as basal fertilizer, or PCU as basal and CU as tillering fertilizer.

Characteristics and Performance of Novel Water-Absorbent Slow Release Nitrogen Fertilizers

In this article, a research on the characteristics and performance of water-absorbent slow release nitrogen fertilizer （WASRNF） using infrared spectroscopy （IR）, scanning electronic microscopy （SEM）, differential scanning calorimetry （DSC）, and thermogravimetry analysis （TGA）, was present. The results indicate that the water absorbency and nitrogen analysis of WASRNF is 103 g g^-1 and 30%, respectively, and WASRNF exhibits approximately neutral pH and very low salt index. WASRNF is a copolymer of nitrogen fertilizer and super absorbent polymer （SAP） monomers which is formed through hydrogen bond interaction, and the molecule contains hydrophilic groups, which is responsible for the absorption and water retention capacity of the molecule. WASRNF is a gel that exhibits the ability to swell, but does not dissolve in water. WASRNF shows non-homogenous nature as a whole, but in local zone it is homogenous, the copolymer molecule shows chain network that is the physical structure responsible for absorption and retention of water in WASRNF. The water retained in WASRNF exists as free and nonfreezing bound and freezing bound water states, with the free and the nonfreezing water accounting for more than 95% of water retained in WASRNF, and the nonfreezing bound water for less than 5%. WASRNF functions in delaying the release of nitrogen from it, thereby serving a novel slow release nitrogenous fertilizer.

Release Characteristics of Different N Forms in an Uncoated Slow/Controlled Release Compound Fertilizer

This study examined the release characteristics of different N forms in an uncoated slow/controlled-release compound fertilizer （UCRF） and the N uptake and N-use efficiency by rice plants. Water dissolution, soil leaching, and pot experiments were employed. The dynamics of N release from the UCRF could be quantitatively described by three equations： the first-order kinetics equation [N1=N0 （1-e^-kt）], Elovich equation （N1=a ＋ blnt）, and parabola equation （N1=a ＋ bt^0.5）, with the best fitting by the first-order kinetics equation for different N （r= 0.9569^＊＊-0.9999^＊＊）. The release potentials （No values estimated by the first-order kinetics equation） of different N in the UCRF decreased in the order of total N 〉 DON 〉 urea-N 〉 NH4^＋-N 〉 NO3^-N in water, and total N 〉 NH4^＋-N 〉 DON 〉 urea-N 〉 NO3^--N in soil, respectively, being in accordance with cumulative amounts of N release. The constants of N release rate （k values and b values） for different N forms were in decreasing order of total N 〉 DON 〉 NH4^＋-N 〉 NO3^--N in water, whereas the k values were urea- N 〉DON 〉 NH4^＋-N 〉 total N 〉 NO3^--N, and the b values were total N 〉 NH4^＋-N 〉 DON 〉 NO3^--N 〉 urea-N in soil. Compared with a common compound fertilizer, the N-use efficiency, N-agronomy efficiency, and N-physiological efficiency of the UCRF were increased by 11.4%, 8.32 kg kg^-1, and 5.17 kg kg^-1, respectively. The ratios of different N to total N in the UCRF showed significant correlation with N uptake by rice plants. The findings showed that the first-order kinetics equation [Nt=N0 （l-e^kt）] could be used to describe the release characteristics of different N forms in the fertilizer. The UCRF containing different N forms was more effective in facilitating N uptake by rice compared with the common compound fertilizer containing single urea-N form.

Synthesis and Performance of Polyurethane Coated Urea as Slow/controlled Release Fertilizer

Polyurethane coated urea slow/controlled release fertilizer was prepared based on urea granules, isocyanate, polyols and paraffin. Isocyanate reacted with polyols to synthesize the polyurethane skin layer on urea granules surface. Paraffin serves as a lubricant during syntheses of polyurethane skin layers. The structure and nutrient release characteristics of the polyurethane skin layers were investigated by FTIR, SEM and TG. Urea nitrogen slow-release behavior of the polyurethane coated urea was tested. The experimental results indicated that compact and dense polyurethane skin layers with a thickness of 10-15 lam were formed on urea surface, the urea nitrogen slow-release time can reach 40-50 days. Paraffin proves to play a key role in inhibiting water to penetrate into urea, but excessive addition would decrease the polyurethane crosslinking density.

Differences of yield and nitrogen use efficiency under different applications of slow release fertilizer in spring maize

Excessive or insufficient application of fertilizer has raised broader concerns regarding soil and environmental degradation.One-time application of slow release fertilizer (SF) has been widely used to reduce yield gap with potential maize yield and improve nitrogen use efficiency (NUE).A 2-year field experiment (2018–2019) was conducted to evaluate the effects of SF rates from 0 to 405 kg N ha^(–1) (named F0,SF225,SF270,SF315,SF360,and SF405) and 405 kg N ha^(–1) of common fertilizer(CF405) on the grain yield,biomass and N accumulation,enzymatic activities related with carbon–nitrogen metabolism,NUE and economic analysis.Results indicated that the highest grain yields,NUEs and economic returns were achieved at SF360in both varieties.The enzymatic activities related with carbon–nitrogen metabolism,pre-and post-silking accumulation of biomass and N increased with increasing SF rate,and they were the highest at SF360 and SF405.The grain yield at SF360had no significant difference with that at SF405.However,the N partial factor productivity,N agronomic efficiency and N recovery efficiency at SF360 were 9.8,6.6 and 8.9% higher than that at SF405.The results also indicated that the average grain yields,NUE and economic benefit at SF405 were 5.2,12.3 and 18.1% higher than that at CF405.In conclusion,decreasing N rate from 405 kg ha^(–1)(CF) to 360 kg ha^(–1)(SF) could effectively reduce the yield gap between realized and potential maize yields.The N decreased by 11.1%,but the yield,NUE and economic benefit increased by 3.2,22.2 and 17.5%,which created a simple,efficient and business-friendly system for spring maize production in Jiangsu Province,China.

A Rapid Technique for Prediction of Nutrient Release from Polymer Coated Controlled Release Fertilizers

Controlled release fertilizers (CRF) are produced with different rates and durations of nutrient release to cater to different crops with wide ranges of nutrient requirements. A rapid technique is needed to verify the label specifications of nutrient release rate and duration. Polymer-coated urea (PCU) (43% nitrogen [N]) and polymer-coated N, phosphorus (P), potassium (K) (PC_NPK;14-14-14) fertilizer products were used in this study. Soil incubation of the above CRF products at 25℃ showed that 63.6% to 70.8% of total N was released over 220 days (d). At 100℃ in water 100% of N release occurred in about 168 to 216 hours (h). Regression equations were developed for cumulative nutrient release as a function of release time separately at 25℃ and 100℃. Using the above regressions, the release duration for a given percent nutrient release at each temperature was calculated. These values were then used to establish a relationship between the release duration at 25℃ as a function of that at 100℃. This relationship is useful to predict the release duration at 25℃ of an unknown CRF product by conducting a rapid release test in water at 100℃. This study demonstrated that a rapid nutrient release test at 100℃ successfully predicted nutrient release rate and duration at 25℃, for polymer coated fertilizers. Therefore, this rapid test can be used to verify the label release rate and duration of most CRF products.

Mechanism in Using Commercial High Efficient Zeolite-Base Greenfeed Slow Release Fertilizers

Fertilizer issues such as overuse, leaching and soil degradation are becoming severe?in?worldwide plantation areas. To secure current food production, prevention measures on these issues are relatively limited on agricultural production areas. Slow release fertilizer is prevailing over past years due to its significant effects on prevention of fertilizer leaching and less harm to soil and underground water. We presented here the mechanisms of a novel zeolite-based slow release fertilizer including its properties as reservoirs of nutrients, pH balancer and also water retainer in soil. By providing sufficient nutrients to soil, this fertilizer has commercially proven to give better growing environment to grower as well as labor saving and cost saving.

Effects of Slow-release Fertilizers and Sugarcane-specific Fertilizers on Yield and Quality of Sugarcane

The effects of slow-release fertilizers and sugarcane-specific fertilizers on the growth and quality of sugarcane were studied to provide a theoretical basis for cultivation of sugarcane with lower costs but higher efficiency. Field experiments were carried out in two major sugarcane areas in Guangxi and three fertilization treatments were studied: single application of compound fertilizers( treatment I),compound fertilizers + slow-release fertilizers( treatment II) and sugarcane-specific base fertilizers + sugarcane-specific topdressing( treatment III). Effects of equal fertilization conditions of treatment I,II and III on growth,yield and sugar of sugarcane were studied. The three fertilization treatments had little effects on emergence,tillering,and effective stems of sugarcane,but compared with the treatment of compound fertilizer( treatment I) with a ratio of N,P,and K of 1∶1∶1,treatment II using slow-release fertilizers as topdressing had better growth,higher plant height and stem diameter,so the yield was higher. Treatment III designed sugarcane-specific fertilizers with proper ratio according to fertilizer demands of sugarcane. Besides,the treatment III sugarcane-specific base fertilizers,containing certain amount of organic matters,could promote the sugar accumulation of sugarcane. Therefore,the sugarcane yield of treatment III was higher than that of treatment II. In conclusion,slow-release fertilizers and sugarcane-specific fertilizers can significantly increase sugarcane yield,especially sugarcane-specific fertilizers. Sugarcane-specific fertilizers have reasonable ratio and contain certain amount of organic matters,and can increase sugar content,obtain significant economic benefits,so it is worth popularization in large areas.

Effect of slow-release iron fertilizer on iron-deficiency chlorosis, yield and quality of Lilium davidii var.unicolor in a two-year field experiment

Iron deficiency chlorosis of Lilium davidii var. unicolor is often the case in practice in alkaline soils of northwest region of China. It is difficult to control iron chlorosis because of high cost and short effective work time of conventional iron fertilizers. In this study, a 2-year field experiment was conducted to evaluate the effects of two slow-release fertilizers on the suppression of iron deficiency chlorosis, soil chemical properties, and the yield and quality of L. davidii var. unicolor. Results show that both coated slow-release iron fertilizers and embedded slow-release iron fertilizer effectively controlled iron-deficiency chlorosis. The application of slow-release iron fertilizers significantly increased plant height and chlorophyll content of L. davidii var. unicolor at different growth stages. Furthermore, coated iron fertilizer application significantly increased starch, protein, soluble sugar and vitamin C content of L. davidii var. unicolor, and it also significantly improved total amino acid content, with increases in essential amino acids(Trp, Leu, Lys, Phe, Val, and Thr contents) and in nonessential amino acids(Asp, Glu, Cit, Ihs, Acc, Ala, Pro, and Cys contents). It was concluded that application of coated slow-release iron fertilizer could be a promising option for suppression of iron deficiency chlorosis and deserves further study.

Effects of an environmental friendly slow-releasing woodchip fertilizer on cabbage production

Wood from three tree species was used for making slow-releasing woodchip fertilizer. Fertilizer made from Populus tomentiglandulosa retained the highest amounts of N （29.04%）, P205 （26.03%） and K20 （16.93%）. On the other band, woodchip fertilizer made from Pinus koraiensis retained the lowest amounts of N （26.22%）, P205 （21.80%） and I（20 （14.49%）. A field experiment was performed in a 50 m^2 experimental plot at Gangwon Agricultural Research and Extension Services, Chuncheon, Korea from August to November 1999. The effects of a general fertilizer along with compost and slow releasing woodchip fertilizer without compost on the cabbage production were observed. Cabbage production parameters, such as top height, head weight, head height, head width, number of outer and inner leaves, leaf width and head length, increased in the field where Larix kaempferi woodchip fertilizer was added as a basal dose. The result showed that the woodchip fertilizer made from Pinus koraiensis had faster releasing properties compared to other woodchip fertilizers. Without adding any compost in the woodchip fertilized field, woodchip fertilizer showed a superior outcome over a general chemical fertilizer. Although the amount of woodchip fertilizer was larger compared to that of a chemical fertilizer, it increased cabbage production.

Effects of Different Slow-release Fertilizers on Growth and Yield of Ratooning Rice

The effect of slow-release fertilizer application on reducing the fertilization times of ratooning rice was explored by carrying out plot experiments using different slow-release fertilizer formulas.The results showed that compared with conventional fertilization of farmers(TCK),there were no significant differences in plant heights of the first rice crop and ratoon rice crop and the number of tillers was slightly increased,by applying different ratios and types of slow-release fertilizers,indicating that reducing fertilization times did not affect rice growth.Compared with the TCK,the yields of treatments T1,T2,T3 and T4 of slow-release fertilizers increased to a certain extent.The yield of the first rice crop increased by 14.7%,16.7%,23.5% and 17.5%,respectively,the yields of the ratoon rice crop increased by 6.3%,5.8%,7.4% and 8.1%,respectively,and the yields of the two rice crops increased between 10.8% and 16.1%,indicating that reasonable combined application of slow-release nitrogen and fast-acting nitrogen fertilizer could meet the nutrient requirements of ratooning rice at different growth stages,and the application of slow-release fertilizers could reduce the fertilization times of ratooning rice.Based on the combination of rice yield and slow-release fertilizer cost in the first rice crop and ratoon rice crop,the T 3 formula was preferred,that is,urea-formaldehyde slow-release nitrogen fertilizer was used as the base and tillering fertilizer,and polyurethane-coated slow-release nitrogen fertilizer was used as the panicle-sprouting fertilizer.

Used for the Study of Nitrogen Fertilizer Slow-Release Carrier Life Sludge

After the sewage treatment, putting the wet sludge in which the heavy metal content is extremely low, corrupt and broken straw, bentonite, urea in proportioning according to the certain ratio, mixing well-distributed, taking the shape of Nitrogen slow-release fertilizers, doing the dynamic bioleaching test by the method of Artificial rainfall simulation, researching the slow-release characteristic, water retention. When the mass ratio of the wet sludge whose water content is 82.5%: bentonite: corrupt and broken straw: urea is 62.5: 12.5: 12.5: 12.5, drip washing the 10g Nitrogen slow-release fertilizers by the 80ml distilled water after 48h, the residue rate of urea is 29.63%; Under the room temperature of 25 ℃, 77%RH, moisture evaporate 46.32% after 60 h. The results demonstrate that the slow-release fertilizer has a good release-effect of nitrogen and water conservation effect. It provides the basic for the development and application of the sewage in the aspect of Nitrogen slow-release fertilizers.

Synthesis and Characterization of Suspension Polymerized Styrene-Divinylbenzene Porous Microsphere Using as Slow-Release-Active Carrier

Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.

In situ polymerization coating and characteristics of coated NPK compound fertilizer

Controlled release NPK compound fertilizers were prepared by means of in situ polymerization of monomers on the surface of fertilizer granules at room temperature. Methacrylate, α-methyl acrylic acid, and ethylene dimethylacrylate were used as monomers, Dibenzoyl peroxide as initiator, and cobalt naphthenate, and triethyl amine as promoters. The structures of coating materials were characterized by IR spectra. The thermogravimetric analysis result indicated that the coating materials were of good thermal stability. The mean thickness of single coating measured with screw gauge was ca. 140 μm. The morphologies of uncoated and coated fertilizer granules analyzed by using scanning electron microscopy were changed from porosities and gullies to hills and plain. The release rate of coated compound fertilizers in water could be controlled by the hydrophicity and thickness of coating. The increase in coating hydrophicity caused the increase in release rate of fertilizer. The increase in thickness of coating slowed the release rate.

Synthesis and Characterization of Suspension Polymerized Styrene-Divinylbenzene Porous Microsphere Using as Slow-Release-Active Carrier

Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceu- ticals were prepared by modified suspension polymerization of styrene (ST) with divinylbenzene (DVB) in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads’ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy (SEM) and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also re- sults in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1:2, DVB content is at the range of 40%—60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydro- quinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.