Study on the occurrence state of indium in sphalerite of Dulong Sn–Zn–In polymetallic deposit,Southwest China

The Dulong deposit,located in the Laojunshan area of southeastern Yunnan,China,is an important polymetallic deposit due to its high reserves of tin,zinc,and indium.The occurrence state of indium is critical for understanding its supernormal enrichment mechanism.Previous studies investigated the occurrence state of indium(including the valence state)based on the indium content in sphalerite and the correlation between metal concentrations.However,more evidence is needed to better constrain indium occurrence at the micro-,nano-,or even atomic scale.In this study,EPMA-FIB-SEM-TEM and XPS techniques were employed to investigate the indium distribution characteristics and occurrence state in sphalerite from the Dulong Sn–Zn–In polymetallic deposit.The maximum concentration of indium in the indium-rich sphalerite samples is 0.37%,and the results of the EPMA analysis showed a relatively homogeneous distribution of indium in sphalerite.The FIB-SEM-TEM results demonstrated that the lattice stripes of sphalerite were periodically and continuously distributed at the nanoscale,confirming that sphalerite in the deposit was an excellent single crystal structure,and the peak heights of the various characteristic peaks of indium in the EDX spectra were relatively close to each other,with no distinct peaks of high indium content.In addition,the XPS results indicate that the element valence state of indium in sphalerite is In^(3+),and it combines with S^(2-)to form a bond.These results indicate that indium in sphalerite of the Dulong deposit is uniformly distributed at both the micro-and nanoscale,and there is no indium-independent mineral.In^(3+)enters the crystal lattice of sphalerite by replacing Zn2+in the form of isomorphic substitution.

Numerical simulation of hydrothermal mineralization associated with simplified chemical reactions in Kaerqueka polymetallic deposit, Qinghai, China

The Kaerqueka polymetallic deposit, Qinghai, China, is one of the typical skarn-type polymetallic ore deposits in the Qimantage metallogenic belt. The dynamic mechanism on the formation of the Kaerqueka polymetallic deposit is always an interesting topic of research. We used the finite difference method to model the mineralizing process of the chalcopyrite in this region with considering the field geological features, mineralogy and geochemistry. In particular, the modern mineralization theory was used to quantitatively estimate the related chemical reactions associated with the chalcopyrite formation in the Kaerqueka polymetallic deposit. The numerical results indicate that the hydrothermal fluid flow is a key controlling factor of mineralization in this area and the temperature gradient is the driving force of pore-fluid flow. The metallogenic temperature of chalcopyrite in the Kaerqueka polymetallic deposit is between 250 and 350 ℃. The corresponding computational results have been verified by the field observations. It has been further demonstrated that the simulation results of coupled models in the field of emerging computational geosciences can enhance our understanding of the ore-forming processes in this area.

Mineral Geochemical Compositions of Tourmalines and Their Significance in the Gejiu Tin Polymetallic Deposits, Yunnan, China

The Gejiu tin polymetallic deposits are located in the southeastern part of Yunnan Province in China. A detailed electronic microprobe study has been carried out to document geochemical compositions of tourmalines from the deposits. The results indicate a systematic change of mineral geochemical compositions, which might be used as a mineral geochemical tracer for post-magmatic hydrothermal fluid, basin fluid and their mixture. The tourmalines from granite are schori with Fe/ （Fe＋Mg） ratios of 0.912-1.00 and Na/（Na＋Ca） ratios of 0.892-0.981. Tourmalines as an inclusion in quartz from the ore bodies are dravite with Fe/（Fe＋Mg） ratios of 0.212-0.519 and Na/（Na＋Ca） ratios of 0.786--0.997. Tourmalines from the country rocks are dravite with Fe/（Fe＋Mg） ratios of 0.313--0.337 and Na/（Na＋Ca） ratio of 0.599-0.723. Tourmalines from cassiterite-tourmaline veins that occur in crannies within the country rocks show distinct optical zoning with alternate occurrence of dravite and schorl, Fe/（Fe＋Mg）=0.374-0.843, Na/（Na＋Ca）=0.538-0.987. It suggests that schorl in granite and dravite in carbonatite are related to magmatic fluid and basin fluid respectively. When magmatic fluid rose up and entered into crannies of the country rocks, consisting mainly of carbonatite, basin fluid would be constantly added to the magmatic fluid. The two types of fluid were mixed in structural crannies of the sedimentary basin accompanied with periodic geochemical oscillations to form material records in chemical composition zonings of tourmalines.

Diversity of Mineralization and Spectrum of the Gejiu Superlarge Tin-Copper Polymetallic Deposit,Yunnan,China

The Gejiu （个旧） deposit is a superlarge tin-copper polymetallic ore-forming concentration area characterized by excellent metallogenic geological settings and advantageous ore-controlling factors. The deposit displays diverse mineralization properties due to different minerals and mineral deposit types. Based on the principal metallogenic factors, metallogenic mechanisms, mineralized components, and occurrence of mineral deposits or ore bodies, the Gejiu mineral district can be divided into 2 combinations of metallogenic series, 4 metallogenic series, 8 subseries, and 27 mineral deposit types. Spatial zonality is evident. The distribution regularity of the elements in both plane and section is Be-W, Sn （Cu, Mo, Bi, Be）-Sn, Pb, Ag-Pb, Zn around a granitic intrusion. The metallogenic epoch is mainly concentrated in the late Yanshanian. During this period, large-scale metallogenic processes related to movement caused by tectonics and magmatism occurred, and a series of magmatic hydrothermal deposits formed. The ore-forming processes can be divided into 4 stages： the silicate stage, the oxide stage, the sulphide stage, and the carbonate stage. Based on the orderliness and diversity （in terms of time, space, and genesis） of the mineralization, the authors have developed a comprehensive spectrum of ore deposits in the Gejiu area. This newly proposed diversity of mineralization and the spectrum developed in this work are useful not only for interpreting the genesis of the Gejiu deposit but also for improving mineral exploration in the area, and in particular, for finding large deposits.

Re-Os Isotopic Dating of a W-Be Polymetallic Deposit in the Southern Qinling Region, China

Objective In recent years, a series of tungsten prospecting breakthroughs have been made in the southern Qinling Mountains. Especially, a new deposit type with a scheelite -beryl-molybdenite assemblage in the Zhen＇an area of Shaanxi Province was firstly discovered. This deposit is currently in a detailed investigation stage, and no detailed study has been yet conducted. This work selected one molybdenite sample from the Be （W） ores in this deposit for Re-Os isotope measurements to define the time limit of tungsten and beryllium mineralization, and to further reveal the ore-forming geological setting of rare metals in the southern Qinling region.

Geochemical Characteristics of Rare Earth Elements in Gejiu Tin Polymetallic Deposits, Yunnan Province, China

In order to get a better understanding of metallogeny, the geochemical characteristics of REE and trace element for Gejiu tin polymetallic deposits were studied by comparing concentrations of REE and trace elements in different type ores and rocks, including skarn-type ore, bedded-type ore, vein-type ore, altered granite, country rocks. Results of this study indicated that the metallogenic matters for different type ores in the study area might be derived from the same origin source, which may be mainly related to granitic activities. Furthermore, there are some differences in concentrations of REE in different ores due to their different depositional mechanism during that time. LREE concentrations were enriched relatively in the vein-type ores and the bedded-type ores with relatively low total REE concentrations, whereas total REE concentrations were higher in the skarn-type ores with LREE and HREE concentrations in wide variation ranges.

Growth Pattern and Its Indication of Spheroidal Nano-Micro Crystal Aggregates of Pyrite in the Baiyunpu Pb-Zn Polymetallic Deposit, Central Hunan

The Baiyunpu deposit lies in the southwest plunging Dachengshan anticline in central Hunan, which is a large Pb-Zn polymetallic deposit. The orebodies were surrounded by the Qiziqiao Formation limestone in the Middle Devonian, and its geological occurrence is consistent with the wall rocks. A large number of spheroidal pyrite aggregates are found unevenly distributed in the ores. The spheroidal aggregates are made up of kernels and concentric rings. The kernels are composed of approximately epigranular pyrite nanocrystals, while the rings are composed of accumulated pyrite microcrystals growing along the radial direction. The spheroidal pyrite aggregate and its outer zones can be divided into five areas（A–E）. The results of electron probe micro analysis（EPMA） show that from the zone A1 to B, Co/Ni 〈1, the sum of Co and Ni is 0.08%–0.26%, S/Fe increases from 2.06 to 2.15. While from the zone C to E, Ni cannot be detected and S/Fe decreases from 2.22 to 2.08. Powder X-ray diffraction（XRD） analysis in the micro zone shows obvious crystalline characteristics in the aggregates. Moving from the inside outwards, the maximum diffraction peak intensity of the（111） and（220） crystal planes of pyrite increases, and the crystallinity improves. The degree of change in the（111） plane is the most prominent. Considering the theory of crystal growth along with the geologic features of the depositional environment where the spheroidal pyrite aggregates developed, we confirm that the spheroidal aggregates are the result of nano-micro crystalline gathering and growth occurring by the following sequence of processes：nano-crystalline nucleation and growth, gathering into a ball, oriented growth of microcrystals, continuous accumulation, and adjustment of grain boundaries. The formation of the spheroidal pyrite aggregates in the late Qiziqiao Formation of the Middle Devonian occurred in a neutral to weak alkaline and reductive sedimentary environment in the normal oxygen-rich shallowwater carbonate platform edge. The variations in the S/Fe ratio and crystallisation characteristics indicate that during pyrite crystal growth, the sulphur fugacity was high locally and rose constantly, the degree of supersaturation decreased locally and the growth environment was stable relatively.

The Characteristics of Ore-Controlling Structure in Baoshan Cu-Pb-Zn Polymetallic Deposit,Hunan Province

The Baoshan Cu-Pb-Zn polymetallic deposit is lied in the central Nanling mineralization zone,and belongs to the junction area of the Chenzhou-Linwu fault zone and the Leiyang-Linwu fault zone.It is a significant part of Nanling polymetallic deposit belt.The outcropping stratas consist of upper Devonian Shetianqiao,Xikuangshan Formation,Lower Carboniferous Menggong’ao,Shidengzi,Ceshui,and Zimenqiao Formation.Igneous rocks in the Baoshan ore area mainly comprise granodiorite porphyry.Furthermore,the radio isotopic age ranges from 123 Ma to 183 Ma,belonging to the early to middle Yanshanian.

Magmatic Hydrothermal Origin of the Wenyu Copper Polymetallic Deposit, Southern Lancangjiang Zone, SW China

The Wenyu copper polymetallic deposit, with proven reserves of about 0.23 Mt Cu, 394 t Ag and 0.04 Mt Pb, is located in the central part of the Lancangjiang volcanic rock belt （Fig. l a）, which is one of the most potential copper polymetallic exploration areas in SW China.

Geochronology and geochemistry of the Hekoulinchang Sn-Pb-Zn-Ag polymetallic deposit(73240 t) in Heilongjiang Province, China

The Hekoulinchang Sn-Pb-Zn-Ag polymetallic deposit(20000 t Sn at 0.27%,236 t Ag at 122.89 g/t,15000 t Pb at 0.84%,and 38000 t Zn at 1.43%)is located in the Wandashan Terrane of the easternmost segment of the Central Asian Orogenic Belt.The timing of Sn-Pb-Zn-Ag polymetallic mineralization remains unclear due to a lack of precise isotope dating directly conducted on ore minerals.The authors herein report that the LA-ICP-MS U-Pb ages of cassiterite and zircon from the granite porphyry in the Hekoulinchang Sn-Pb-Zn-Ag polymetallic deposit are 101.4±7.9 Ma and 115.4±1.0 Ma,respectively,indicating that Sn mineralization and magmatism occurred during the Early Cretaceous.The granite porphyry belongs to the subalkaline series peraluminous I-type granites that are depleted in Nb,Ta,and Ti and enriched in Rb,Th,U,and Pb.TheεHf(t)values of the granite porphyry range from 0.9 to 7.4,with an average of about 5.6 and two-stage model ages(T_(DM2))of 705–1116 Ma,with an average age of 819 Ma.The ε_(Nd)(t)values of the apatites are–1.60–0.45,with an average of–0.9,and two-stage model ages(T_(DM2))of 872–1040 Ma,with an average age of 983 Ma.The Nd-Hf isotope data indicate that the magma may have been derived from the partial melting of juvenile crustal material.

The Sachakou Deposit in West Kunlun of Xinjiang: A Pb-Zn Polymetallic Deposit Associated with Magmatic Metasomatism of Carbonate Rock

Objective The Sachakou Pb-Zn polymetallic deposit is located in Hetian County, Xinjiang （geographical coordinates of E78° 57＇ 54.30＂-78°59＇ 53.63＂, N34° 39＇ 27.50＂-34° 40＇ 57.21＂）. It belongs to the West Kunlun orogenic belt on the northwest edge of the Qinghai-Tibet Plateau and is connected to the Sanjiang orogenic belt to the south （Spurlin et al., 2005）. In recent years, a series of Pb-Zn mineralized spots and deposits have been discovered in this area one after another, which is called the Huoshaoyun ore concentration area. Among them, the Sachakou Pb-Zn deposit has reserves up to140 Mt, which has reached a large scale. However, the study on the genesis of deposits in this area has only just begun. This work studied the genesis ofthis Pb-Zn deposit in order to provide new ideas for the genesis of regional deposits and regional prospecting.

Sulfur Isotopes Geochemistry of the Nage Cu-Pb Polymetallic Deposit,Southeast Guizhou Province,China

The Nage Cu-Pb polymetallic deposit is located in the transitional zone of the Yangtze craton and cathaysia,that is the southwest of Jiangnan orogenic belt. The mainly strata are Wentong formation of Mesoproterozoic Sibo group and the Jialu formation(Qbj) ,Wuye formation(Qbw) ,Fanzhao formation(Qbf) and Gongdong formation(Qbg) of the Neoproterozoic Qingbaikou System Xiajiang group.

Hydrothermal evolution and source of metallogenic materials of Beiya Au polymetallic deposit,western Yunnan,China

The Beiya porphyry-skarn gold-polymetallic deposit is one of the largest gold deposits in China and it also contains significant amounts of silver and base metals.The ore-bearing monzonitic granite porphyry occurs as a stock,of which the skarn type gold-copper-iron ore bodies are controlled by the contact zone between alkali-rich monzonitic granite porphyry and the limestone,and the gold-silver polymetallic mineralization is controlled by interlayer structure.Alteration and mineralization occur around the intrusion and exterior of monzonitic granite porphyry.Ore mineral formation sequence is as follows:skarn minerals→magnetite→pyrite→chalcopyrite/bornite+pyrite+gold→pyrite+galena+gold(silver).Petrographic studies of fluid inclusions indicate that the following types of inclusions exist in the pre-mineralization quartz-pyrite stage:gas-liquid two-phase inclusions(L-type),three-phase inclusions with daughter minerals(D-type)and gas-rich inclusions(V-type).The colorless transparent quartz in the main gold-chalcopyrite-pyrite stage mainly consists of L-type and V-type inclusions,whereas the inclusions in the late gold-silver-galena stage are mainly L-type.The evolution of ore-forming fluids shows a trend from high temperature,high salinity to medium-low temperature and low salinity.Medium-low density fluids play a dominant role in mineral component migration and transportation.Fluid cooling and boiling are the main mechanisms of gold-copper precipitation,while the involvement of atmospheric water and pH reduction are the main mechanisms of gold-silver polymetallic precipitation.The fluids in the quartz-pyrite stage before mineralization and the main gold-chalcopyrite-pyrite stage are dominated by magmatic water,while in the gold-silver-galena stage the fluids are dominated by atmospheric water.Isotope tracers show that S and Pb are mainly derived from monzonitic granite porphyry,not from limestone of the Beiya Formation.

Genetic links of porphyry Mo-epithermal Pb–Zn–Ag mineralization system:a case study of the Shipingchuan polymetallic deposit,South China

Compared with the porphyry Cu-epithermal Au mineralization system,detailed studies on the porphyry Mo-epithermal Pb–Zn–Ag–Au mineralization are rare due to limited exposures.The Shipingchuan polymetallic deposit,located in the South China Mo Province(SCMP)represents a typical example containing both porphyry Mo and epithermal Pb–Zn–Ag mineralization.The Mo mineralization mainly occurs as molybdenite-quartz veins in veinlets or as disseminated molybdenite within the potassic,silicic,and sericitic syenogranite.The Pb–Zn–Ag mineralization is characterized by veinlet-type sphalerite–galena–pyrite–quartz–calcite vein within the volcanic rocks accompanied with silicifi cation and propylitization.Five molybdenite samples yield a Re–Os isochron age of 104.7±0.7 Ma that is consistent with the zircon age(107.5±2.1 Ma)of the ore-bearing syenogranite within errors.Together with previous reported Ar–Ar ages(106.6–121.8 Ma)of Pb–Zn–Ag related volcanic rocks,the Mo and Pb–Zn–Ag mineralization belong to a magmatic-hydrothermal event in the Early Cretaceous.Meanwhile,the total Re contents of molybednite range from 1.28 to 45.55 ppm,indicating the ore-forming materials were from a mixture between the mantle and crustal material.Moreover,previous sulfur isotopic values(3.7–4.3‰)of the pyrites from the porphyry Mo mineralization were consistent with the reported range of 4.0–6.1‰of the sphalerites from the Pb–Zn–Ag mineralization,implying that the sulfur of two-types of mineralization was derived from magma.The above-mentioned spatial,temporal,and isotopic lines of evidence suggest that the Mo and Pb–Zn–Ag mineralization of the Shipingchuan deposit was formed from the same metallogenic system.In consideration of regional tectonic evolution history,we propose that the porphyry Mo-epithermal Pb–Zn–Ag mineralization formed in an extensional tectonic setting caused by the continued rollback and the eventual slab break-off of the subducting PaleoPacifi c plate.

Geochemical Characteristics and Significance of Basalt in the Hongshiyan Pb-Zn-Cu Polymetallic Deposit in Southeastern Yunnan Province

1 Introduction Southeast Yunnan is the convergent place of the Yangtze,Indochina blocks(Xu Wei,et al.2008).The Hongshiyan Pb-Zn-Cu polymetallic deposit is located in Wenshan Prefecture,Yunnan Province.It is a typical large sized VMS-type deposit discovered in recent years.The major ore minerals are sphalerite,galena,chalcopyrite ect.

Re-Os dating,and Pb-H-O isotope characteristics,of the Abra Cu-Ag-Pb-Au polymetallic deposit in Western Australia

The Abra deposit,a large lead-silver-copper–gold polymetallic deposit in Western Australia,is located at the eastern of the metallogenic belt of the Jillawarra basin in the Bangemall basin.The 4 th to the 6 th rock section of the Irrigully Group of Edmund Series are the principal ore-host strata,composed mainly of sandstone and fine sandstone.The orebody in Abra can be classified into two types as upper layer-like lead-silver and lower veins or netvein copper–gold.The metal minerals are mainly galena,chalcopyrite,and pyrite,while the gangue minerals are mainly quartz,dolomite,and barite.Both ReOs isotopic age of the pyrite(1329.5±98 Ma)with the initial(187Os/188Os)=5.0±3.8 and Pb isotopic compositions(206 Pb/204 Pb=15.914–15.967,207Pb/204Pb=15.425–15.454,208Pb/204Pb=35.584–35.667)suggests that the metal minerals were sourced from the wall-rocks.d DV-SMOWvalues of quartz range from-35%to-17%whereas d18 OV-SMOWvalue range from 12%to 16%which indicates that the ore-forming fluids of Abra were mediumlow temperature and medium–low salinity,and were mainly metamorphic water and secondary atmospheric precipitation.When the medium–low temperature oreforming fluids are mixed with oxidizing reducing fluids carrying a large number of metal substances,a large number of ore-forming substances will be precipitated when the physical and chemical conditions change,thus it can be considered that the Abra deposit is a medium–low temperature hydrothermal polymetallic deposit.

Studies on Characteristics of Fracture Lithofaciesin Wenxipo W-Cs-Rb Polymetallic Deposit,Hainan Province,China

1 Introduction Wenxipo W-Cs-Rb polymetallic depositis located in Fengshou rubidium-cesium polymetallic prospecting area in Danzhou City,Hainan Province,China.The hornstone facies,a thermal metamorphic facies,

Geological Characteristics and Its Metallogenesis of Daolundaba Copper Polymetallic Deposits,Inner Mongolia

1 Geology Daolundaba copper polymetallic deposit occurs in West Ujimqin Banner,the Xilin Gol League of Inner Mongolia,along the west side of South part of Daxinganling ore belt,whose tectonic position just lies at the junction of Siberian Block in the south part,North China Block in the north and Songliao block in the east.The Daolundaba copper polymetallic deposit is hosted by the Lower Proterozoic Baoyintu group of biotite-plagioclase gneiss(Pt1by),upper Permian Linxi formation of sandy slate(P2l),and the Hercynian Qianjinchang pluton of biotite granite.

Characteristics and sources of ore-forming fluids of South Narimalahei copper polymetallic deposit in East Kunlun,Qinghai

The South Narimalahei area is located on the north side of the Middle Kunlun fault in the eastern section of the East Kunlun composite orogenic belt. The ore body is veined and controlled by structures and se- condary fissures, which occurs in the structural alteration fracture zone in the Late Triassic granodiorite. In this deposit, copper mineralization is closely related to silicification and sericification. The formation process of the deposit includes hydrothermal mineralization and supergene oxidation. In this paper, the fluid inclusion minera- logy , microscopic temperature measurement and stable isotope studies have been carried out for ore of the main mineralization stage. The results show that the primary gas-liquid two-phase inclusions and a small amount of single-liquid inclusions are mainly developed in the quartz in the main mineralization stage. The results of microscopic temperature measurement show that the ore-forming fluid which has low temperature (151.7℃ -205.8 ℃), low salinity(2.06wt% - 4.94wt%NaCl), low density (0.86 -0.92 g/cm^( 3)) and shallow formation (1.5 -3.0 km) is a hydrothermal solution of NaCl-H_(2)O system. Hydrogen and oxygen isotope results show that the ore-forming fluids mainly come from atmospheric precipitation, with a small amount of magmatic fluids participating. It is preliminarily determined that the South Narimalahei copper polymetallic deposit is a low- temperature hydrothermal vein deposit.

Re-Os isotopic dating and geological significance of molybdenite from Xintian Cu-Mo polymetallic deposit in Yanbian,Jilin

Xintian polymetallie deposit is a hydrothermal vein type Cu-Mo deposit. Analysis on Re-Os isotopic dating for the molybdenite from this deposit is undertaken to determine metallogenic epoch and dynamics setting of the deposit. Re-Os isotopic dating for the molybdenite yields model ages ranging from 123.9 ± 1.9 Ma to 124.7 ± 1.8 Ma, with a weighted mean age of 123.4 ±0.81 Ma, and an isochron age of 127 ± 16 Ma, MSWD = 0.25, indicating that the metallization was at late Yanshanian. The content of Re in molybdenite is （330.1 ±4.0-367.9 ± 3.1 ） xl0^-6, which demonstrates mantle derived metallogenic sources. Integrating the region-al tectonic evolution and the metallogenic characteristics of other contemporaneous Cu-Mo deposits in the re-gion, it is suggested that the Cu-Mo mineralization of this deposit occurred in an active epieontinental environ-ment under lithospheric extension resulted from the subduction of the Izanagi plate to the Paleo-Asia continental margin at late Yanshanian. The Mantle wedge was partially melted with large amount of metallogenic elements dissolved in it. Under the favorable conditions of crust-mantle interaction, large-scale magmatic activity turns out to be the important mechanism of the mineralization of many Cu-Mo deposits in the Xiaoxingan Range-Zhangguangcai Mountain metallogenic belt, including the Xintian Cu-Mo polymetallic deposit.