Study on Effects of Curing Process on Characteristics of Marinated Beef Products

[Objectives]This study was conducted to compare the effects of different curing processes on the characteristics of marinated beef.[Methods]Marinated beef was obtained by two curing processes:static curing and injection and vacuum tumbling curing.The effects of the two curing processes on the production rate,curing absorption rate,water content,soluble protein content,amino acid nitrogen content,texture characteristics and microstructure of the product were compared.[Results]Compared with static curing,the production rate of marinated beef increased by 10%,the curing absorption rate increased by 28%,the texture and microstructure were improved,and the water content increased,while the soluble protein content decreased.As a result,the sensory score was higher.There was no significant difference in the content of amino acid nitrogen,but it decreased compared with raw meat.To sum up,injection and vacuum tumbling curing is more conducive to the processing of marinated beef.[Conclusions]This study provides a theoretical basis for the industrial production of marinated beef,and lays a foundation for in-depth exploration of injection and vacuum tumbling curing technique of marinated beef.

Rubber Curing Process Simulation Based on Parabola Model

The curing process of rubber fender was investigated. A parabola model was put forward for the first time, which described variation of rubber thermal properties such as heat conduction and specific heat. Based on Kamal and Sourour model, a modified Rafei kinetic model was used to predict the rubber curing kinetics. To compare with experimental data, the fender curing process was simulated by parabola model and linear model respectively. Additionally, the curing craft and structure of the fender were modified and evaluated based on finite element analysis （FEA）. As a result, the curing uniformity and efficiency of the fender was highly improved. It was investigated that, the parabola model correlated the rubber thermal behavior more precisely. The numerical prediction was in good agreement with the experimental evaluation.

Hot Mixing Behavior and Curing Process of Epoxy Asphalt

A new hot mixed epoxy asphalt system was developed. The reaction process of epoxy resin was characterized by Fourier transform infrared spectroscopy (FTIR). The viscosity was investigated by Brinell viscometer when epoxy resin was mixed with asphalt. The glass transition temperature (Tg), homogeneity, thermal stability and viscoelasticity of epoxy asphalt were analyzed by differential scanning calorimetry (DSC), metallographic microscope, thermogravimetric (TG) and dynamic mechanical analysis (DMA). The results showed that the viscosity of epoxy resin modified asphalt reached 1000 mPa·s for more than 180 minutes at 180 ℃, while the best construction process is mixing at 180 ℃ for 2 hours and curing at 60 ℃ for 4 days. The particle size of asphalt is less than 50 μm. In addition, the mechanical properties of the materials are uniform within the specified pavement thickness.

Integrated Design of D.D.I., Filament Winding and Curing Processes for Manufacturing the High Pressure Vessel(Type Ⅱ)

As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehicles.Because of the limited space available for the car,the composite pressure vessel(TypeⅡ)has been applied to the CNG vehicles to reach large capacity and weight lightening vehicles.High pressure vessel(TypeⅡ)is composed of a composite layer and a metal liner.The metal liner is formed by the deep drawing and ironing(D.D.I.)process,which is a complex process of deep drawing and ironing.The cylinder part is reinforced by composite layer wrapped through the filament winding process and is bonded to the liner by the curing process.In this study,an integrated design method was presented by establishing the techniques for FE analysis of entire processes(D.D.I.,filament winding and curing processes)to manufacture the CNG composite pressure vessel(TypeⅡ).Dimensions of the dies and the punches of the 1 st(cup drawing),2 nd(redrawing-ironing 1-ironing 2)and 3 rd(redrawing-ironing)stages were calculated theoretically,and shape of tractrix die to be satisfied with the minimum forming load was suggested for life improvement and manufacturing costs in the D.D.I.process.Thickness of the composite material was determined in the filament winding process,finally,conditions of the curing process(number of heating stage,curing temperature,heating rate and time)were proposed to reinforce adhesive strength between the composite layers.

MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.

The Curing Process and Elastic Modulus of HTPB-Containing Polyurethanes

By means of the functionality distribution deduced and weight averaged functionality a and molecular size vb2, the sol-gel distribution equations of HTPB(Hydroxyl terminated polybutadiene) + TDI (Toluene-2, 4-diisocyanate) expressed by the model of Aai-B2 type polycondensation were solved and the elastic modulus were calculated. The experimental results of HTPB+TDI curing process indicate that a, vb2 and functionality distribution function are available basically.

Kinetics of Autoclave Curing Process on Autoclaved Aerated Concrete with Magnetite Tailings

Lightweight and energy saving autoclaved aerated concrete(AAC) acting as a newbuilding material were prepared by using magnetite tailings from iron ore as main rawmaterials,and the purpose of comprehensive utilization of tailings resources was to improve their utilization efficiency.The effects of curing system on AAC product performance were discussed.The autoclave curing reaction kinetics was studied as well as the generated amount of hydration product trends over autoclave curing temperature and time were analyzed.The results indicated that the properties of AAC was in accordance with Chinese national standard the A3.5 B06 class of GB/T11968-2006 by prepared from magnetite tailing as the main rawmaterials.Meanwhile,autoclave curing process was controlled by the diffusion velocity through the products ' layers of reactants,and the apparent activation energy of autoclave curing process was 19.269 k J/mol.Compressive strength of aerated concrete is improved by mutual cementation between the appropriate amount of calcium silicate hydrate and tobermorite crystal.

Investigate the Effect of the Magnetic Field on the Mechanical Properties of Silicone Rubber-Based Anisotropic Magnetorheological Elastomer during Curing Process

In this investigation,a new silicone rubber-based MRE material was prepared to be used as a forming medium in manufacturing thin-walled complexshaped Ni-based tubes through the bulging process.Thus,it is significant to investigate the effect of magnetic field intensity,magnetic field loading time,and angle on the mechanical properties of the prepared MRE material during the curing process.The obtained results showed that increasing the magnetic field intensity during the curing process can improve the orientation of the chain structure in the elastomer matrix effectively.However,its mechanical properties are the best under the corresponding magnetic field intensity of 321 mT.Besides,by extending the magnetic field loading time in the curing process,the orientation of the chain structure was optimized,at the same time,the mechanical properties were also improved,and the best loading time is about 20–25 min.By changing the loading angle of the magnetic field during the curing process,the mechanical properties of the MRE were improved.When the loading angle of the magnetic field is 90°,the elastomer showed the best compression mechanical properties and excellent compression reversibility.Besides,for the anisotropic MRE material,the performance with magnetic compression is always better than that without magnetic compression.

An Investigation of Stimulating the Autoclave Curing Process of Resin Matrix/Fiber Reinforced Composite Material, Ⅰ: Process model

A mathematical model is made which describes the curing process of composites constructed from continuous fiber-reinforced, thermosetting resin matrix prepreg materials, and the consolidation of the composite is developed. The model provides the variation of temperature distribution, the cure reaction process in the resin, the resin flow and fibers stress inside the composite, and the void variation and the residual stress distribution. It can be used to illustrate the mechanism of curing process and optimize the cure cycle of composite material in order to ensure the quality of a product.

Early Hydration and Setting Process of Fly Ash-blended Cement Paste under Different Curing Temperatures

A specially developed ultrasonic measurement apparatus (UMA) was used to in situ monitor the setting process of fly ash blended cement paste. Combined with the results of Vicat Needle tests, isothermal calorimetric measurement, XRD analysis, SEM morphology and compressive test, the influence of curing temperature (20, 40, 60, and 90 ℃) and fly ash content (0,10%, 20% and 30%) on the setting and hydration process of fly ash blended cement paste was analyzed. The results show that setting and hardening process of fly ash blended cement paste at elevated temperature can be clearly identified into three stages including dormant stage, acceleration stage and deceleration stage. The increasing of curing temperature greatly accelerates the setting and hardening process. However, the content of fly ash does not have significant effect on the setting in condition of 90 ℃. Besides, the initial and final setting time of cement paste is correspondent with the time of duration of dormant stage and the time of UPV value is 1500 m/s (T1500), respectively. Thus, the UMA can be used to determine the initial and final setting time of cementitious material under different curing temperatures. The compressive test results indicate that the paste with 20% fly ash presents higher compressive strength than the plain paste at curing temperatures of 90 ℃. Therefore, appropriate amount of fly ash is beneficial for concrete in the high temperature curing conditions.

Study on preparation of fast curing novolaks for the shell process

To save energy and raise molding and coremaking productivity, the synthetic procedure of novolaks for the shell process was investigated. The study indicated that it was difficult to obtain fast curing novolaks under strongly acidic conditions alone. A novel synthetic procedure was proposed for preparing novolaks in a two-step manner, a divalent metal salt catalyzed novolak preparation followed by a strong acid catalyzed novolak preparation. The optimum conditions for the two-step procedure were determined by orthogonal experiment design. The results showed that it was easy to prepare fast curing novolaks with cure time in the range of 20 s to 30 s and softening point in the range of 80℃ to 90℃ under complex catalysis conditions.

Synthetic Process of Bio-Based Phenol Formaldehyde Adhesive Derived from Demethylated Wheat Straw Alkali Lignin and Its Curing Behavior

Lignin is a natural biopolymer with a complex three-dimensional network, commercially obtained from wasteliquid of paper pulp and bioethanol production, and could be a candidate for preparation of environment-friendlybio-based polyphenol material. In the present work, the demethylated wheat straw alkali lignin (D-Lig), preparedby demethylation of wheat straw alkali lignin (Lig) using an in-situ generated Lewis acid, was used to synthesizebio-based phenol formaldehyde resin adhesive (D-LPF) applied in plywood. Effects of synthetic process’s factors,including lignin substitution for phenol, NaOH concentration and molar ratio of formaldehyde to phenol, on thebonding strength and free formaldehyde content of D-LPF were investigated in detail, and the optimum syntheticprocess of D-LPF was obtained as following: Lignin substitution for phenol 60%, NaOH concentration 5.0% andmolar ratio of formaldehyde to phenol 2.0, and under the optimum reaction condition, the D-LPF presented lower free formaldehyde content (0.18%) and higher bonding strength (2.19 MPa), which was better than those ofcontaining-lignin phenol formaldehyde resin adhesive (LPF). Additionally, the curing behavior of the adhesivewas studied by differential scanning calorimetry (DSC) combined with gel time. It can be obtained that D-LPFresin adhesive had the shortest gel time, and fastest curing rate, compared with those of PF and L-PF resin adhesives. The curing kinetics data was fitted well by Kissinger model using non-isothermal DSC method, and theaverage activation energy value was 85.3 kJ/mol, slightly higher than that of commercial PF resin, while lowerthan that of LPF (90.2 kJ/mol). Finally, based on the analytical results of high temperature fourier transform infrared spectroscopy (FTIR), a possible curing mechanism of D-LPF was proposed.

CURING PROCESS OF PHOTOPOLYMER RESIN BOND DIAMOND TOOLS

Analytical simulation and corresponding proof-test are adopted to study the principle of the curing process of photopolymer resin diamond tools. The influence of the diamond as abrasives in photopolymer resin owing to the absorptivity of the diamond for the UV light on the photopolymer resin curing process is discussed. Based on the above, a kind of diamond tool—dicing blade is selected to analyze the curing process of photopolymer bond diamond tools. An analytical model of curing process is developed and a correlation curve between the depth of polymerization of the photopolymer resin diamond tools and the exposure time to represent the curing process of photopolymer bond dicing blade. A test is done to proof-test the validity of the analytical model and the correlation curve. The simulated data fit the experimental results, which demonstrates the analytical models and numerical algorithm are of high reliability. The analytical simulation method could possibly be used to optimize the curing cycle and improve the quality of the photopolymers resin bond diamond tools.

基于深度学习的高效率烤烟等级识别模型研究

烤烟的等级识别是烟草产业的一个关键环节,为了降低烟农烤烟分级劳动强度,减少主观因素,提高识别精度,需要实现烤烟的自动分级。研究了深度学习中多种卷积神经网络的多层特征提取方法,并基于ShuffleNetV2网络提出一种改进的网络模型(ShuffleNetV2_FTC)。ShuffleNetV2_FTC网络是将ShuffleNetV2网络的主干单元进行更改,并引入CBAM(Convolutional Block Attention Module)注意力机制和SiLU激活函数。应用该模型对27种类别的烤烟图像进行识别分类。该模型的最佳测试准确率为93.09%,检测帧率达到每秒15.3张。相对原模型获得了0.24%(0.5×)、6.06%(1×)和4.73%(1.5×)的准确率提升,每秒检测12.3张图片到15.3张图片的检测帧率提升。ShuffleNetV2_FTC网络结合机器视觉技术可以很好地识别烤烟等级,为优化烤烟的收购、烘干和加工等流程奠定基础。

国产雪茄烟叶关键生产技术研究进展

近年来,雪茄烟生产技术在国产雪茄烟叶品种、栽培、晾制、发酵及工艺设备等方面取得了显著成效。本文梳理了上述雪茄烟关键生产技术领域近5年的研究进展,并对雪茄烟关键核心技术的未来研究方向进行了展望。

固化条件对苯并噁嗪树脂基材料力学性能的影响

苯并噁嗪树脂基复合材料具备耐高温,材料热稳定性高,固化后无组分溢出等特点,被广泛用于国产C919大型客机后机身后段等高温工作区域。采用热压罐固化工艺,评价了不同固化温度、固化压力、保温时间等固化工艺条件对苯并噁嗪树脂基复合材料力学性能的影响,以便选择最优的固化工艺条件,同时评价了该材料71℃的湿热老化性能。结果表明:固化温度对材料的压缩、层间剪切强度影响较小;随着固化压力的降低,材料的压缩强度和层间剪切强度略有降低;随着保温时间的延长,压缩强度略有增加,压缩模量略有下降,层间剪切强度变化较小;相比干态层间剪切强度,71℃湿热老化条件下的层间剪切强度下降幅度在7%以内,该材料在抗湿热老化性能方面表现优异。

氢化羧基丁腈橡胶与双马树脂共固化机理研究

以双马来酰亚胺树脂(BMI)为基相,碳纤维为增强型,氢化羧基丁腈橡胶(HXNBR)为粘弹性材料。用分子动力学模拟揭示180℃下HXNBR与BMI共固化机理,根据正交试验法通过改变硅烷偶联剂KH550和加工助剂WB212的含量,设计出性能优良的BMI基嵌入式共固化阻尼复合材料(ECCDS)。通过硫化性能进行测试,表明KH550和WB212的加入增大了阻尼材料的交联度和硫化特性。对其进行红外光谱和微观形貌分析,验证了HXNBR与BMI之间确实有大量新的新化学官能团产生,并形成了互穿网格结构,使复合材料的层间结合性能显著提高。

Curing mechanism of alkaline phenolic resin with organic ester

To study the curing mechanism of alkaline phenolic resin with organic ester, three esters were chosen to react with three systems - alkaline phenolic resin, potassium hydroxide aqueous solution containing phenol, and potassium hydroxide aqueous solution. The variations of pH, heat release and gel pH during the reactions were monitored and measured. Infrared spectroscopy （IR） and thermal gravity analysis （TG） techniques were used to characterize the curing reaction. It was found that organic ester is only partial y hydrolyzed and resin can be cured through organic ester hydrolysis process as wel as the reaction with redundant organic ester. The sequential curing mechanism of alkaline phenolic resin cured by organic ester was identified as fol ows： a portion of organic ester is firstly hydrolyzed owing to the effect of the strong alkaline; the gel is then formed after the pH decreases to about 10.8-10.88, meanwhile, the redundant organic ester （i.e. non-hydrolysis ester） starts the curing reaction with the resin. It has also been found that the curing rate depends on the hydrolysis velocity of organic ester. The faster the hydrolysis speed of the ester, the faster the curing rate of the resin.

Experimental Study of Monitoring and Controlling of Composite Cure Process in Autoclave Featured with Fiber Optic Sensor

With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.

典型复合材料结构固化变形仿真预测与控制验证

针对典型复合材料结构固化成型过程中变形难以控制的问题,本文对典型复合材料结构的固化变形进行仿真预测,从固化工艺和模具补偿两方面对固化变形加以控制和验证。固化工艺方面以各设计点变形数据为基础确定了最优固化工艺曲线,模具补偿方面提出了一种构件有限元模型自适应调整的方法,综合考虑固化工艺参数与模具型面补偿采用了一种基于全局补偿量的协同控制方法。结果表明,通过仿真模拟L形构件的固化变形误差为12.4%,借助响应面优化算法得到的L形构件最优固化工艺曲线其固化变形预测值与各试验设计点最大变形的最小值偏差不超过3.3%;T形加筋壁板有限元模型经自适应调整后,对于下表面与目标型面之间的偏差距离,数值模拟值与试验测量值的最大相对误差为17.20%。通过全局补偿量的协同控制方法对半筒形壁板的模具进行补偿,其固化变形最大值相比于传统单一模具型面补偿控制方法降低了接近90%。