Several crosslinked proton exchange membranes with high proton conductivities and low methanol permeability coefficients were prepared, based on the sulfonated poly[(4-fluorophenoxy)(phenoxy)] phosphazene(SPFPP) and n...Several crosslinked proton exchange membranes with high proton conductivities and low methanol permeability coefficients were prepared, based on the sulfonated poly[(4-fluorophenoxy)(phenoxy)] phosphazene(SPFPP) and newly synthesized water soluble sulfonated poly(cyclophosphazene)(SPCP) containing clustered flexible pendant sulfonic acids. The structure of SPCP was characterized by fourier transform infrared spectroscopy(FTIR) and ~1H NMR spectra. The membranes showed moderate proton conductivities and much lower methanol permeability coefficients when compared to Nafion 117. Transmission electron microscopy(TEM) results indicated the well-defined phase separation between the locally and densely sulfonated units and hydrophobic units, which induced efficient proton conduction. In comparison with SPFPP membrane, the proton conductivities, oxidative stabilities and mechanical properties of crosslinked membranes remarkably were improved. The selectivity values of all the crosslinked membranes were also much higher than that of Nafion 117(0.74×10~5S· s/cm~3). These results suggested that the c SPFPP/SPCP membranes were promising candidate materials for proton exchange membrane in direct methanol fuel cells.展开更多
Two novel biodegradable thermosensitive polyphosphazenes with lactic acid ester and methoxyethoxyethoxy side groups were synthesized via the macromolecular substitution reactions of poly(dichlorophosphazene) with the ...Two novel biodegradable thermosensitive polyphosphazenes with lactic acid ester and methoxyethoxyethoxy side groups were synthesized via the macromolecular substitution reactions of poly(dichlorophosphazene) with the sodium salt of lactic acid ester and sodium methoxyethoxyethoxide.Their structures were confirmed by ^(31)p NMR,~1H NMR,^(13)C NMR,IR,DSC,and elemental analysis.The lower critical solution temperature(LCST) behavior in water and in vitro degradation property of the polymers was investigated.The...展开更多
Poly (4- methylphenoxyphosphnzene ) -graft-poly ( ethylene oxide ) ( PPZ-g- PEO ), a novel amphiphilie grafting polymer was prepared via the Decker-Forster reaction. It is found that the graft efficiency increas...Poly (4- methylphenoxyphosphnzene ) -graft-poly ( ethylene oxide ) ( PPZ-g- PEO ), a novel amphiphilie grafting polymer was prepared via the Decker-Forster reaction. It is found that the graft efficiency increased with extension of reaction time. Low molecular weight of poly ( ethylene oxide ) favored the grafting reaction. The grafted polymer has two different glass transition temperatures( Tg) with those of pure poly( 4-methyl- phenoxy-phopsphazene ) and PEO. The emulsifying ability of grafted polymer was studied with benzene-water mixtare. The emulsifying volumes increased with the decreasing of PEO' s molecular weight. The contact angle of film forming from grafted polymer decreased after introduction of PEO grafting chain.展开更多
The synthesis of a novel polyorganophosphazene that contains charge-transporting agent as side chains for photoconductive application is reported. Structural characterization for the high polymer was presented by 1H-N...The synthesis of a novel polyorganophosphazene that contains charge-transporting agent as side chains for photoconductive application is reported. Structural characterization for the high polymer was presented by 1H-NMR, infrared spectrosocopy, gel permeation chromatography (GPC).展开更多
A new polyphosphazene containing binaphtholyl and indole azo chromophores as side chains with high glass transition temperature ( Tg ) was synthesized by a post-functional method. The polymer was well characterized. I...A new polyphosphazene containing binaphtholyl and indole azo chromophores as side chains with high glass transition temperature ( Tg ) was synthesized by a post-functional method. The polymer was well characterized. Its Tg was tested to be 168℃, and the poled film of P2 reveals a resonant d33 value of 20 pm/V by second harmonic generation ( SHG ) measurements.展开更多
Drug-resistant bacteria present a severe threat to public health,emphasizing the importance of developing broad-spectrum antibacterial agents that are free from drug resistance.Among silver-based antibacterial agents,...Drug-resistant bacteria present a severe threat to public health,emphasizing the importance of developing broad-spectrum antibacterial agents that are free from drug resistance.Among silver-based antibacterial agents,nano-silver has been found to exhibit the most promising and comprehensive performance.The exploration of the antibacterial capacity and morphological changes of silver nanoparticles(AgNPs)could offer a starting point for the development of safe and efficient antibacterial agents.In this study,three types of nano-silver-modified polyphosphazene(PRV)nanoparticles with different morphologies were synthesized using precipitation polymerization.These nanoparticles were characterized using various techniques,including Fourier-transform infrared spectroscopy(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),and thermogravimetric analysis(TGA).The antibacterial activity of these nanoparticles against Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)was assessed using minimum inhibitory concentration(MiC)/minimum bactericidal concentration(MBC)tests and inverted fluorescence microscopy.Our results revealed that the antibacterial activity of silver nanoparticles can vary significantly depending on their immobilized form.Ag@PRV Strawberry-like nanoparticles(NPs)exhibited higher antibacterial activity compared to Ag@PRV Yolk-Shell NPs and Ag@PRV Cable-like nanofibers(NFs).Notably,all three types of synthesized nanoparticles demonstrated a stronger bactericidal effect on Gram-positive bacteria than Gram-negative bacteria.Live/dead bacterial staining and scanning electron microscopy demonstrated that silver can kill bacteria by altering the permeability of their cell membranes.These findings offer valuable insights for designing and practically applying new silver-based antibacterial agents in the future.展开更多
Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of...Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of micro-nanospheres with cyclic cross-linked poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol)(PZS). A new organic-inorganic poly(phosphonitrile)-modified aluminum hypophosphite microspheres(PZS-AHP) were synthesized by encapsulation and applied to flame retardant thermoplastic polyurethane(TPU). The microstructure and chemical composition of the PZS-AHP microsphere were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray spectroscopy. The thermal stability of PZS-AHP microsphere was explored with thermogravimetric analysis. Thermogravimetric data indicate that the PZS-AHP microspheres have excellent thermal stability. The thermal and flame-retarding properties of the TPU composites were evaluated by thermogravimetric(TG), limited oxygen index tests(LOI), and cone calorimeter test(CCT). The TPU composite achieved vertical burning(UL-94) V-0 grade and LOI value reached 29.2% when 10 wt% PZS-AHP was incorporated. Compared with those of pure TPU, the peak heat release rate(pHRR) and total heat release(THR) of TPU/10%PZS-AHP decreased by 82.2% and 42.5%, respectively. The results of CCT indicated that PZS-AHP microsphere could improve the flame retardancy of TPU composites.展开更多
Magnetic polyphosphazene(MPZS) particles coated by Ag nanoparticles(MPZS-Ag) have been developed as surface enhanced Raman spectroscopy(SERS) substrates for sensitive detection of melamine in aqueous solutions and mil...Magnetic polyphosphazene(MPZS) particles coated by Ag nanoparticles(MPZS-Ag) have been developed as surface enhanced Raman spectroscopy(SERS) substrates for sensitive detection of melamine in aqueous solutions and milk samples.5,5’-Dithiobis-(2-nitrobenzoic acid)(DTNB) was used as model analyte to test the SERS activity of the MPZS-Ag particles.The prepared MPZS-Ag particles possess both magnetic responsiveness and excellent SERS properties.SERS detection of different concentrations of melamine aqueous solutions and spiked milk samples were performed by the MPZS-Ag particles.The limit of detection(LOD) of the melamine in aqueous solutions was 10^-7 mol/L(0.0126 mg/L) and 0.6 mg/L in real milk samples using the MPZS-Ag particles as SERS substrates.The LOD of the melamine are much lower than the safety values of Food and Drug Administration and Codex Alimentarius Commission.These results indicate that the MPZS-Ag particles have promising application prospect for SERS analysis in food safety fields.展开更多
Poly(bis(phenoxy)phosphazene) (SPBPP)/phosphotungstic acid (PWA)/silica composite membranes for fuel cells were prepared. The composite membranes were characterized by using FTIR, TGA and SEM techniquies. Inco...Poly(bis(phenoxy)phosphazene) (SPBPP)/phosphotungstic acid (PWA)/silica composite membranes for fuel cells were prepared. The composite membranes were characterized by using FTIR, TGA and SEM techniquies. Incorporation of PWA particles and silica particles into the SPBPP polymer matrix and a specific interaction between them were confirmed by FTIR spectra. TGA results showed that the composite membranes had high thermal stability. Homogeneous distribution of PWA and silica particles within the SPBPP matrix was verified by SEM micrographs. The doped membranes showed increased water uptake and proton conductivity.展开更多
A new organic-inorganic hybrid polyphosphazene polymer was synthesized via sequential nucleophilic substitution using allylamine and phenol. The polymer was characterized by FTIR, 1H-NMR, and 31P-NMR spectra. The ther...A new organic-inorganic hybrid polyphosphazene polymer was synthesized via sequential nucleophilic substitution using allylamine and phenol. The polymer was characterized by FTIR, 1H-NMR, and 31P-NMR spectra. The thermal properties were studied by DSC and TGA. It was found that the polymer has good thermal stability. Char yields of the polymer reaches to 48.6% at 800 ℃. The high char yield makes it possible in theory for the polymer to be used as flame retardant. By cross linking, the thermal stability of the polymer could be improved further.展开更多
A novel series of polyphosphazene-grafl-polystyrene (PP-g-PS) copolymers were successfully prepared by atom transfer radical polymerization (ATRP) of styrene monomers and brominated poly(bis(4-methylphenoxy)pho...A novel series of polyphosphazene-grafl-polystyrene (PP-g-PS) copolymers were successfully prepared by atom transfer radical polymerization (ATRP) of styrene monomers and brominated poly(bis(4-methylphenoxy)phosphazene) macroinitiator. The graft density and the graft length could be regulated by changing the bromination degree of the macroinitiator and the ATRP reaction time, respectively. The PP-g-PS copolymers readily underwent a regioselective sulfonation reaction, which occurred preferentially at the polystyrene sites, producing the sulfonated PP-g-PS copolymers with a range of ion exchange capacities. The resulting sulfonated PP-g-PS membranes prepared by solution casting showed high water uptake, low water swelling and considerable proton conductivity. They also exhibited good oxidative stability and high resistance to methanol crossover. Morphological studies of the membranes by transmission electron microscopy showed clear nanophase-separated structures resulted from hydrophobic polyphosphazene backbone and hydrophilic polystyrene sulfonic acid segments, indicating the formation of proton transferring tunnels. Therefore, these sulfonated copolymers may be candidate materials for proton exchange membranes in direct methanol fuel cell (DMFC) applications.展开更多
A novel synthetic strategy was developed to prepare polyphosphazenes containing C60 moieties. Thus, the phosphonitrile chloride trimer underwent thermal ring-opening polymerization (ROP) in the presence of C60 molec...A novel synthetic strategy was developed to prepare polyphosphazenes containing C60 moieties. Thus, the phosphonitrile chloride trimer underwent thermal ring-opening polymerization (ROP) in the presence of C60 molecules to yield the reactive macromolecular intermediate, C60-containing poly(dichlorophosphazene). And then, the other groups could be linked to the phosphazene backbone by nucleophilic substitution reaction of the chlorine atoms in this intermediate to produce a series of C60-containing polyphosphazene. The polymer exhibits good solubility in common organic solvents and is thermally stable.展开更多
A new strategy, a post coupling method to develop the polyphosphazene (P2) functionalized with carbazolyl groups and nonlinear optical (NLO) chromophores, has been explored. P2 exhibits good solubility in common organ...A new strategy, a post coupling method to develop the polyphosphazene (P2) functionalized with carbazolyl groups and nonlinear optical (NLO) chromophores, has been explored. P2 exhibits good solubility in common organic solvents. The poled film of P2 exhibits a resonant d 33 value of 42 pm/V by second harmonic generation (SHG) measurements.展开更多
In this study,hexachlorocyclotriphosphazene( HCCP)modified by boric acid and 3-aminopropyltriethoxysilane( KH-550)in solvent diglyme( FR-HCCP) was used as the flame retardant for poly( ethylene terephthalate)( PET) co...In this study,hexachlorocyclotriphosphazene( HCCP)modified by boric acid and 3-aminopropyltriethoxysilane( KH-550)in solvent diglyme( FR-HCCP) was used as the flame retardant for poly( ethylene terephthalate)( PET) composites. The flame retardancy and thermal property of pure PET and flame-retarded PET composites were mainly investigated. The flame retardancy was investigated by limited oxygen index( LOI) and UL-94 vertical burning test. The results showed that the composites could achieved an increased UL-94 V-0 rating and LOI value 30. 2, when the content of FR-HCCP was just 1%. The pyrolysis-gas chromatography-mass spectrometry( Py-GC / MS) study demonstrated that introducing FR-HCCP into PET would prevent the polymer pyrolysis during heating. TGA analysis showed that the addition of FR-HCCP could improve the char formation of the system. Roman spectra showed the order degree of residue was increasing by adding the additive. The morphology and the chemical structure of the charred residue were detected by SEMand FTIR,respectively. Results demonstrated that a good barrier was formed by the char of the composite,which protected the inside of the composite during burning.展开更多
Poly(organophosphazenes) have potential applications in making water-soluble and biocompatible quantum dots (QDs) due to their wide variety of properties. The CdSe QDs of green emission and the core-shell CdSe/ZnS QDs...Poly(organophosphazenes) have potential applications in making water-soluble and biocompatible quantum dots (QDs) due to their wide variety of properties. The CdSe QDs of green emission and the core-shell CdSe/ZnS QDs of red emission were prepared. Subsequently the trioctylphosphine oxide-stabilized CdSe/ZnS QDs were transferred from chloroform into water through a ligand exchange process with poly(glycino amino acid)phosphazenes, which can be obtained from the saponification of poly (glycino amino ester)phosphazenes at room temperature. The resulting QDs-polymer nanocomposite particles can form colloidally stable suspensions in water and exhibit good photostability.展开更多
Poly{bis[4-(4'-(S)-2-methylbutoxy)biphenyloxy]phosphazene}(PP-C) was designed and successfully synthesized, and then characterized by means of FT-IR spectroscopy, ~1H- and ^(31)P-NMR, GPC spectroscopy, wide a...Poly{bis[4-(4'-(S)-2-methylbutoxy)biphenyloxy]phosphazene}(PP-C) was designed and successfully synthesized, and then characterized by means of FT-IR spectroscopy, ~1H- and ^(31)P-NMR, GPC spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry. The results indicated that for PP-C, the M_w is 2.18×10~5 and the PDI is 1.96. PP-C was a kind of crystallized polymer with a crystallizing point of -2.0 ℃ and a melting point of 28 ℃. The conformational chirality of the PP-C molecules was studied using circular dichroism spectrum. It was found that in dilute THF solution, the biphenyl groups in the PP-C molecules twisted randomly. However, when the PP-C formed aggregates, the biphenyl groups tended to twist single-handedly, which was controlled by the adjacent chiral alkoxy groups.展开更多
The utilization of biomaterials in implanted blood-contacting medical devices often induces a persistent problem of microbial infection,which results from bacterial adhesion and biofilm formation on the surface of bio...The utilization of biomaterials in implanted blood-contacting medical devices often induces a persistent problem of microbial infection,which results from bacterial adhesion and biofilm formation on the surface of biomaterials.In this research,we developed new fluorinated alkoxyphosphazene materials,specifically poly[bis(octafluoropentoxy)phosphazene](OFP)and crosslinkable OFP(X–OFP),with improved mechanical properties,and further modified the surface topography with ordered pillars to improve the antibacterial properties.Three X–OFP materials,X–OFP3.3,X–OFP8.1,X–OFP13.6,with different crosslinking densities were synthesized,and textured films with patterns of 500/500/600 nm(diameter/spacing/height)were fabricated via a two stage soft lithography molding process.Experiments with 3 bacterial strains:Staphylococcal epidermidis,Staphylococcal aureus,and Pseudomonas aeruginosa showed that bacterial adhesion coefficients were significantly lower on OFP and X–OFP smooth surfaces than on the polyurethane biomaterial,and surface texturing further reduced bacterial adhesion due to the reduction in accessible surface contact area.Furthermore the anti-bacterial adhesion effect shows a positive relationship with the crosslinking degree.Biofilm formation on the substrates was examined using a CDC biofilm reactor for 7 days and no biofilm formation was observed on textured X–OFP biomaterials.The results suggested that the combination of fluorocarbon chemistry and submicron topography modification in textured X–OFP materials may provide a practical approach to improve the biocompatibility of current biomaterials with significant reduction in risk of pathogenic infection.展开更多
文摘Several crosslinked proton exchange membranes with high proton conductivities and low methanol permeability coefficients were prepared, based on the sulfonated poly[(4-fluorophenoxy)(phenoxy)] phosphazene(SPFPP) and newly synthesized water soluble sulfonated poly(cyclophosphazene)(SPCP) containing clustered flexible pendant sulfonic acids. The structure of SPCP was characterized by fourier transform infrared spectroscopy(FTIR) and ~1H NMR spectra. The membranes showed moderate proton conductivities and much lower methanol permeability coefficients when compared to Nafion 117. Transmission electron microscopy(TEM) results indicated the well-defined phase separation between the locally and densely sulfonated units and hydrophobic units, which induced efficient proton conduction. In comparison with SPFPP membrane, the proton conductivities, oxidative stabilities and mechanical properties of crosslinked membranes remarkably were improved. The selectivity values of all the crosslinked membranes were also much higher than that of Nafion 117(0.74×10~5S· s/cm~3). These results suggested that the c SPFPP/SPCP membranes were promising candidate materials for proton exchange membrane in direct methanol fuel cells.
基金the National Natural Foundation of China(No. 20364002)the Natural Science Foundation of Yunnan Province(No.2005B0027 M),China
文摘Two novel biodegradable thermosensitive polyphosphazenes with lactic acid ester and methoxyethoxyethoxy side groups were synthesized via the macromolecular substitution reactions of poly(dichlorophosphazene) with the sodium salt of lactic acid ester and sodium methoxyethoxyethoxide.Their structures were confirmed by ^(31)p NMR,~1H NMR,^(13)C NMR,IR,DSC,and elemental analysis.The lower critical solution temperature(LCST) behavior in water and in vitro degradation property of the polymers was investigated.The...
文摘Poly (4- methylphenoxyphosphnzene ) -graft-poly ( ethylene oxide ) ( PPZ-g- PEO ), a novel amphiphilie grafting polymer was prepared via the Decker-Forster reaction. It is found that the graft efficiency increased with extension of reaction time. Low molecular weight of poly ( ethylene oxide ) favored the grafting reaction. The grafted polymer has two different glass transition temperatures( Tg) with those of pure poly( 4-methyl- phenoxy-phopsphazene ) and PEO. The emulsifying ability of grafted polymer was studied with benzene-water mixtare. The emulsifying volumes increased with the decreasing of PEO' s molecular weight. The contact angle of film forming from grafted polymer decreased after introduction of PEO grafting chain.
文摘The synthesis of a novel polyorganophosphazene that contains charge-transporting agent as side chains for photoconductive application is reported. Structural characterization for the high polymer was presented by 1H-NMR, infrared spectrosocopy, gel permeation chromatography (GPC).
文摘A new polyphosphazene containing binaphtholyl and indole azo chromophores as side chains with high glass transition temperature ( Tg ) was synthesized by a post-functional method. The polymer was well characterized. Its Tg was tested to be 168℃, and the poled film of P2 reveals a resonant d33 value of 20 pm/V by second harmonic generation ( SHG ) measurements.
基金financially supported by the Ningbo Scientific and Technological Innovation 2025 Major Project(No.2020Z097)Natural Science Foundation of Zhejiang Province(No.LY18E030009)+1 种基金Ningbo Clinical Research Center for Otolaryngology Head and Neck Disease(No.2022L005)Ningbo Medical and Health Brand Discipline(No.PPXK2018-02).
文摘Drug-resistant bacteria present a severe threat to public health,emphasizing the importance of developing broad-spectrum antibacterial agents that are free from drug resistance.Among silver-based antibacterial agents,nano-silver has been found to exhibit the most promising and comprehensive performance.The exploration of the antibacterial capacity and morphological changes of silver nanoparticles(AgNPs)could offer a starting point for the development of safe and efficient antibacterial agents.In this study,three types of nano-silver-modified polyphosphazene(PRV)nanoparticles with different morphologies were synthesized using precipitation polymerization.These nanoparticles were characterized using various techniques,including Fourier-transform infrared spectroscopy(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),and thermogravimetric analysis(TGA).The antibacterial activity of these nanoparticles against Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus)was assessed using minimum inhibitory concentration(MiC)/minimum bactericidal concentration(MBC)tests and inverted fluorescence microscopy.Our results revealed that the antibacterial activity of silver nanoparticles can vary significantly depending on their immobilized form.Ag@PRV Strawberry-like nanoparticles(NPs)exhibited higher antibacterial activity compared to Ag@PRV Yolk-Shell NPs and Ag@PRV Cable-like nanofibers(NFs).Notably,all three types of synthesized nanoparticles demonstrated a stronger bactericidal effect on Gram-positive bacteria than Gram-negative bacteria.Live/dead bacterial staining and scanning electron microscopy demonstrated that silver can kill bacteria by altering the permeability of their cell membranes.These findings offer valuable insights for designing and practically applying new silver-based antibacterial agents in the future.
基金Supported by the Opening Project of Hubei Three Gorges Laboratory (No.SK213008)the Innovation Fund of Key Laboratory of Green Chemical Process of Ministry of Education (No.GCXP202109)。
文摘Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of micro-nanospheres with cyclic cross-linked poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol)(PZS). A new organic-inorganic poly(phosphonitrile)-modified aluminum hypophosphite microspheres(PZS-AHP) were synthesized by encapsulation and applied to flame retardant thermoplastic polyurethane(TPU). The microstructure and chemical composition of the PZS-AHP microsphere were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray spectroscopy. The thermal stability of PZS-AHP microsphere was explored with thermogravimetric analysis. Thermogravimetric data indicate that the PZS-AHP microspheres have excellent thermal stability. The thermal and flame-retarding properties of the TPU composites were evaluated by thermogravimetric(TG), limited oxygen index tests(LOI), and cone calorimeter test(CCT). The TPU composite achieved vertical burning(UL-94) V-0 grade and LOI value reached 29.2% when 10 wt% PZS-AHP was incorporated. Compared with those of pure TPU, the peak heat release rate(pHRR) and total heat release(THR) of TPU/10%PZS-AHP decreased by 82.2% and 42.5%, respectively. The results of CCT indicated that PZS-AHP microsphere could improve the flame retardancy of TPU composites.
基金the financial support of the National Natural Science Foundation of China(Nos.51503040,31771893)the Natural Science Foundation of Fujian Province,China(No. 2018J01766)the Outstanding Youth Research Talent Cultivation Program of Universities in Fujian Province,China (No.601936)
文摘Magnetic polyphosphazene(MPZS) particles coated by Ag nanoparticles(MPZS-Ag) have been developed as surface enhanced Raman spectroscopy(SERS) substrates for sensitive detection of melamine in aqueous solutions and milk samples.5,5’-Dithiobis-(2-nitrobenzoic acid)(DTNB) was used as model analyte to test the SERS activity of the MPZS-Ag particles.The prepared MPZS-Ag particles possess both magnetic responsiveness and excellent SERS properties.SERS detection of different concentrations of melamine aqueous solutions and spiked milk samples were performed by the MPZS-Ag particles.The limit of detection(LOD) of the melamine in aqueous solutions was 10^-7 mol/L(0.0126 mg/L) and 0.6 mg/L in real milk samples using the MPZS-Ag particles as SERS substrates.The LOD of the melamine are much lower than the safety values of Food and Drug Administration and Codex Alimentarius Commission.These results indicate that the MPZS-Ag particles have promising application prospect for SERS analysis in food safety fields.
文摘Poly(bis(phenoxy)phosphazene) (SPBPP)/phosphotungstic acid (PWA)/silica composite membranes for fuel cells were prepared. The composite membranes were characterized by using FTIR, TGA and SEM techniquies. Incorporation of PWA particles and silica particles into the SPBPP polymer matrix and a specific interaction between them were confirmed by FTIR spectra. TGA results showed that the composite membranes had high thermal stability. Homogeneous distribution of PWA and silica particles within the SPBPP matrix was verified by SEM micrographs. The doped membranes showed increased water uptake and proton conductivity.
基金Supported by financial aid of the Shanghai ScientificTechnical Tackle-key- problem (Grant No. 045211022)
文摘A new organic-inorganic hybrid polyphosphazene polymer was synthesized via sequential nucleophilic substitution using allylamine and phenol. The polymer was characterized by FTIR, 1H-NMR, and 31P-NMR spectra. The thermal properties were studied by DSC and TGA. It was found that the polymer has good thermal stability. Char yields of the polymer reaches to 48.6% at 800 ℃. The high char yield makes it possible in theory for the polymer to be used as flame retardant. By cross linking, the thermal stability of the polymer could be improved further.
基金financially supported by the National Natural Science Foundation of China(No.51103012)
文摘A novel series of polyphosphazene-grafl-polystyrene (PP-g-PS) copolymers were successfully prepared by atom transfer radical polymerization (ATRP) of styrene monomers and brominated poly(bis(4-methylphenoxy)phosphazene) macroinitiator. The graft density and the graft length could be regulated by changing the bromination degree of the macroinitiator and the ATRP reaction time, respectively. The PP-g-PS copolymers readily underwent a regioselective sulfonation reaction, which occurred preferentially at the polystyrene sites, producing the sulfonated PP-g-PS copolymers with a range of ion exchange capacities. The resulting sulfonated PP-g-PS membranes prepared by solution casting showed high water uptake, low water swelling and considerable proton conductivity. They also exhibited good oxidative stability and high resistance to methanol crossover. Morphological studies of the membranes by transmission electron microscopy showed clear nanophase-separated structures resulted from hydrophobic polyphosphazene backbone and hydrophilic polystyrene sulfonic acid segments, indicating the formation of proton transferring tunnels. Therefore, these sulfonated copolymers may be candidate materials for proton exchange membranes in direct methanol fuel cell (DMFC) applications.
基金Project supported by the National Natural Science Foundation of China (No. 20674059).
文摘A novel synthetic strategy was developed to prepare polyphosphazenes containing C60 moieties. Thus, the phosphonitrile chloride trimer underwent thermal ring-opening polymerization (ROP) in the presence of C60 molecules to yield the reactive macromolecular intermediate, C60-containing poly(dichlorophosphazene). And then, the other groups could be linked to the phosphazene backbone by nucleophilic substitution reaction of the chlorine atoms in this intermediate to produce a series of C60-containing polyphosphazene. The polymer exhibits good solubility in common organic solvents and is thermally stable.
文摘A new strategy, a post coupling method to develop the polyphosphazene (P2) functionalized with carbazolyl groups and nonlinear optical (NLO) chromophores, has been explored. P2 exhibits good solubility in common organic solvents. The poled film of P2 exhibits a resonant d 33 value of 42 pm/V by second harmonic generation (SHG) measurements.
文摘In this study,hexachlorocyclotriphosphazene( HCCP)modified by boric acid and 3-aminopropyltriethoxysilane( KH-550)in solvent diglyme( FR-HCCP) was used as the flame retardant for poly( ethylene terephthalate)( PET) composites. The flame retardancy and thermal property of pure PET and flame-retarded PET composites were mainly investigated. The flame retardancy was investigated by limited oxygen index( LOI) and UL-94 vertical burning test. The results showed that the composites could achieved an increased UL-94 V-0 rating and LOI value 30. 2, when the content of FR-HCCP was just 1%. The pyrolysis-gas chromatography-mass spectrometry( Py-GC / MS) study demonstrated that introducing FR-HCCP into PET would prevent the polymer pyrolysis during heating. TGA analysis showed that the addition of FR-HCCP could improve the char formation of the system. Roman spectra showed the order degree of residue was increasing by adding the additive. The morphology and the chemical structure of the charred residue were detected by SEMand FTIR,respectively. Results demonstrated that a good barrier was formed by the char of the composite,which protected the inside of the composite during burning.
基金Project(2006CB601005) supported by the National Basic Research Program of Chinaproject(200331) supported by the National Excellent Doctoral Dissertations of Chinaproject(Q5009001200801) supported by the Post-Doctoral Science and Technology Foundation from Beijing University of Technology
文摘Poly(organophosphazenes) have potential applications in making water-soluble and biocompatible quantum dots (QDs) due to their wide variety of properties. The CdSe QDs of green emission and the core-shell CdSe/ZnS QDs of red emission were prepared. Subsequently the trioctylphosphine oxide-stabilized CdSe/ZnS QDs were transferred from chloroform into water through a ligand exchange process with poly(glycino amino acid)phosphazenes, which can be obtained from the saponification of poly (glycino amino ester)phosphazenes at room temperature. The resulting QDs-polymer nanocomposite particles can form colloidally stable suspensions in water and exhibit good photostability.
基金Funded by the National Natural Science Foundation of China(No.21274098)
文摘Poly{bis[4-(4'-(S)-2-methylbutoxy)biphenyloxy]phosphazene}(PP-C) was designed and successfully synthesized, and then characterized by means of FT-IR spectroscopy, ~1H- and ^(31)P-NMR, GPC spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry. The results indicated that for PP-C, the M_w is 2.18×10~5 and the PDI is 1.96. PP-C was a kind of crystallized polymer with a crystallizing point of -2.0 ℃ and a melting point of 28 ℃. The conformational chirality of the PP-C molecules was studied using circular dichroism spectrum. It was found that in dilute THF solution, the biphenyl groups in the PP-C molecules twisted randomly. However, when the PP-C formed aggregates, the biphenyl groups tended to twist single-handedly, which was controlled by the adjacent chiral alkoxy groups.
基金Research reported in this publication was supported by the National Institute of Allergy and Infectious Disease of NIH under award number R21 AI139706.
文摘The utilization of biomaterials in implanted blood-contacting medical devices often induces a persistent problem of microbial infection,which results from bacterial adhesion and biofilm formation on the surface of biomaterials.In this research,we developed new fluorinated alkoxyphosphazene materials,specifically poly[bis(octafluoropentoxy)phosphazene](OFP)and crosslinkable OFP(X–OFP),with improved mechanical properties,and further modified the surface topography with ordered pillars to improve the antibacterial properties.Three X–OFP materials,X–OFP3.3,X–OFP8.1,X–OFP13.6,with different crosslinking densities were synthesized,and textured films with patterns of 500/500/600 nm(diameter/spacing/height)were fabricated via a two stage soft lithography molding process.Experiments with 3 bacterial strains:Staphylococcal epidermidis,Staphylococcal aureus,and Pseudomonas aeruginosa showed that bacterial adhesion coefficients were significantly lower on OFP and X–OFP smooth surfaces than on the polyurethane biomaterial,and surface texturing further reduced bacterial adhesion due to the reduction in accessible surface contact area.Furthermore the anti-bacterial adhesion effect shows a positive relationship with the crosslinking degree.Biofilm formation on the substrates was examined using a CDC biofilm reactor for 7 days and no biofilm formation was observed on textured X–OFP biomaterials.The results suggested that the combination of fluorocarbon chemistry and submicron topography modification in textured X–OFP materials may provide a practical approach to improve the biocompatibility of current biomaterials with significant reduction in risk of pathogenic infection.