Grafting Copolymerization of Styrene and Acrylic Acid onto Pre-irradiated Polypropylene Fabric

Grafting copolymerization of styrene and acrylic acid onto polypropylene fabric had been studied by using a pre-irradiation technique. The polypropylene fabric Samples were irradiated by Y-ray and electron beam under the conditions of air and nitrogen gas, respectively. The effect of absorbed dose, monomer concentration in solvent, reaction temperature and reaction time on the degree of grafting were determined. The effects of metallic salts and sulphuric acid on the grafting yield of acrylic acid were also examined. The samples irradiated by electron beam give a much higher degree of grafting than those by Y -ray when styrene was grafted to polypropylene fabric. However, the grafting yield of acrylic acid on polypropylene fabric in the presence of metallic salts and sultric acid showed the opposite results from the case of styrene. This effect is reasonably interpreted by assuming that the grafting is dominated by trapped radicals and peroxides in pre-irradiated polypropylene.

Efficient and selective removal of Pb(Ⅱ) from landfill leachate using L-serine-modified polyethylene/polypropylene nonwoven fabric synthesized via radiation grafting technique

In this study,to efficiently remove Pb(Ⅱ) from aqueous environments,a novel L-serine-modified polyethylene/polypropylene nonwoven fabric sorbent(NWF-serine)was fabricated through the radiation grafting of glycidyl methacrylate and subsequent L-serine modification.The effect of the absorbed dose was investigated in the range of 5–50 kGy.NWF-serine was characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,and scanning electron microscopy.Batch adsorption tests were conducted to investigate the influences of pH,adsorption time,temperature,initial concentration,and sorbent dosage on the Pb(Ⅱ) adsorption performance of NWF-serine.The results indicated that Pb(Ⅱ) adsorption onto NWF-serine was an endothermic process,following the pseudo-second-order kinetic model and Langmuir isotherm model.The saturated adsorption capacity was 198.1 mg/g.NWF-serine exhibited Pb(Ⅱ) removal rates of 99.8% for aqueous solutions with initial concentrations of 100 mg/L and 82.1% for landfill leachate containing competitive metal ions such as Cd,Cu,Ni,Mn,and Zn.Furthermore,NWF-serine maintained 86% of its Pb(Ⅱ) uptake after five use cycles.The coordination of the carboxyl and amino groups with Pb(Ⅱ) was confirmed using X-ray photoelectron spectroscopy and extended X-ray absorption fine structure analysis.

Comparative Study of Polypropylene Non-Woven Surgical Mask and Locally Manufactured Woven and Knitted Fabrics Facial Masks

The outbreak of coronavirus has led to an increase in the demand for facemasks globally. Unavailability of appropriate polypropylene non-woven fabrics face masks as a result of inadequate supply to satisfy the growing population has brought about the manufacturing of locally fabrics masks to augment or substitute standard medical class facemasks. The study aims at analyzing airflow of these locally manufactured fabrics to determine possible means of transmitting the virus as well as establish comfort of the user of these masks. Standard polypropylene non-woven, woven and knitted fabrics were considered for the study. Air permeability test was conducted on these fabrics using Frazier Air permeability tester. Depending on the property significant variation in the textile fabrics, polypropylene non-woven is widely accepted for facial masks. Nevertheless, this study illustrates that woven and knitted fabrics have more open structures, which allow a high rate of air penetration and so may require two or three layers to prevent antimicrobial or antiviral potential.

Photo-Grafting Copolymerization of PP Nonwoven Fabric and Its Application for Acidic Dye Adsorption and Filtration

The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and adsorptive filtration performance of the resulted PP fabrics were investigated.The results showed that the grafting copolymerization preferred to happen in the inner layer of the fabrics. The water flux of the grafted fabrics decreases with the increase of grafting yield. The collapse of the grafted polymer chains causes the flux increase in acidic condition,or vice versa at alkaline version. The coiling of the polyelectrolyte chains upon the dye adsorption seems to violate the routine assumption of the rigid substrate, and this gets the adsorption energy constant negative. The static adsorption process follows the Lagergren's pseudo-second order kinetic equation. The removals of circa( ca.) 100% of the total permeation volume3 500 mL simulated dye wastewater was reached during permeation.The dye adsorbed fabrics were regenerated by the mixed media of the cationic surfactant / ethanol /water. The grafted fabric assumes stable fabric integrity and stability during permeation,and presents excellent dye adsorption capacity,easy desorption, and repeatable utilization.

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric(PP-g-AA)andpolypropylene membrane were reported.The extents of grafting were controlled by the plasma and polymerizationcondition.Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain apolyion complex(PIC).At last,CF_4 plasma was used to give PICs hydrophobic property.The moisture regain and water-repellency of the processed PICs was investigated.The surfaces were characterized using ATR FT-IR and XPS.The resultindicates that the products have very high ability to adsorb moisture,even better than cotton fiber.At the same time,theproducts show excellent hydrophobic property,which can't be wetted by those reagents whose surface tensions were higherthan 327 mN/m.