A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifie...A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.展开更多
The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and ...The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and adsorptive filtration performance of the resulted PP fabrics were investigated.The results showed that the grafting copolymerization preferred to happen in the inner layer of the fabrics. The water flux of the grafted fabrics decreases with the increase of grafting yield. The collapse of the grafted polymer chains causes the flux increase in acidic condition,or vice versa at alkaline version. The coiling of the polyelectrolyte chains upon the dye adsorption seems to violate the routine assumption of the rigid substrate, and this gets the adsorption energy constant negative. The static adsorption process follows the Lagergren's pseudo-second order kinetic equation. The removals of circa( ca.) 100% of the total permeation volume3 500 mL simulated dye wastewater was reached during permeation.The dye adsorbed fabrics were regenerated by the mixed media of the cationic surfactant / ethanol /water. The grafted fabric assumes stable fabric integrity and stability during permeation,and presents excellent dye adsorption capacity,easy desorption, and repeatable utilization.展开更多
Diblock copolymers containing polystyrene (PSt) andpolybutyl methacrylate (PBMA)segnents and random coplymer of styrene (St) and butyl methacrylate (BMA) havebeen prepared by atom transfer radical polymerizanon (ATRP)...Diblock copolymers containing polystyrene (PSt) andpolybutyl methacrylate (PBMA)segnents and random coplymer of styrene (St) and butyl methacrylate (BMA) havebeen prepared by atom transfer radical polymerizanon (ATRP). Diblock copolymers ofBAN and St with predetermined molecular weight (1× 104ed.5 × 104)and narrowermolecular weight distribution(1.25～1.5) were obained The random copolymercompositions were determined by 1HNMR spectroscopy and the reactivity ratios wereevaluated by the extended Kelen-Tudos method to be γst=0.91, γBMA=0.32.展开更多
The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching ...The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated. The free radical of modification surfaces of iPP is measured by chemical method. The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene （St） in St. The grafting polymer of St onto iPP is characterized by FTIR. The grafting rate is dependent on plasma exposure time and discharge voltage. The studies show that homopolymerization of St is undergone at the sane time during the graftingcopolymerization of St onto/PP.展开更多
基金Funded by the Natural Science Foundation of Liaoning Province of China(No.20180550432)Natural Science Foundation for Young Doctoral Research(No.2020-BS-158)Basic Scientific Research Project of Colleges and Universities of Liaoning Provincial Department of Education(No.LJKQZ2021060)。
文摘A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.
基金the Priority Academic Development Program for Textile Science and Textile Engineering of Jiangsu Higher Education Institutions,Chinathe Environmental Protection Department of Jiangsu Province,China(No.2012009)Suzhou Municipal Government,China(No.SYG201202)
文摘The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and adsorptive filtration performance of the resulted PP fabrics were investigated.The results showed that the grafting copolymerization preferred to happen in the inner layer of the fabrics. The water flux of the grafted fabrics decreases with the increase of grafting yield. The collapse of the grafted polymer chains causes the flux increase in acidic condition,or vice versa at alkaline version. The coiling of the polyelectrolyte chains upon the dye adsorption seems to violate the routine assumption of the rigid substrate, and this gets the adsorption energy constant negative. The static adsorption process follows the Lagergren's pseudo-second order kinetic equation. The removals of circa( ca.) 100% of the total permeation volume3 500 mL simulated dye wastewater was reached during permeation.The dye adsorbed fabrics were regenerated by the mixed media of the cationic surfactant / ethanol /water. The grafted fabric assumes stable fabric integrity and stability during permeation,and presents excellent dye adsorption capacity,easy desorption, and repeatable utilization.
文摘Diblock copolymers containing polystyrene (PSt) andpolybutyl methacrylate (PBMA)segnents and random coplymer of styrene (St) and butyl methacrylate (BMA) havebeen prepared by atom transfer radical polymerizanon (ATRP). Diblock copolymers ofBAN and St with predetermined molecular weight (1× 104ed.5 × 104)and narrowermolecular weight distribution(1.25～1.5) were obained The random copolymercompositions were determined by 1HNMR spectroscopy and the reactivity ratios wereevaluated by the extended Kelen-Tudos method to be γst=0.91, γBMA=0.32.
基金financially supported by the National Natural Science Foundation of China(No.50673073)the Doctoral Foundation of Ministry of Education of China(No.20060056043)
文摘The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated. The free radical of modification surfaces of iPP is measured by chemical method. The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene （St） in St. The grafting polymer of St onto iPP is characterized by FTIR. The grafting rate is dependent on plasma exposure time and discharge voltage. The studies show that homopolymerization of St is undergone at the sane time during the graftingcopolymerization of St onto/PP.
