The interface behavior of polyamide 1010 (PA1010) and polypropylene (PP) was studied. In order to improve their interfacial adhesion, functional PP was prepared by means of grafting glycidyl methacrylate (GMA) on PP m...The interface behavior of polyamide 1010 (PA1010) and polypropylene (PP) was studied. In order to improve their interfacial adhesion, functional PP was prepared by means of grafting glycidyl methacrylate (GMA) on PP main chains and used instead of plain PP. Several technological characterizations were performed here on their interfaces. ESCA was used to confirm that some kind of reaction occurred between end groups of PA1010 and epoxy species of PP-g-GMA. The peel test was adopted to measure interfacial adhesion. It was found that the fracture energy of interfaces between PA1010 and PP-g-GMA was dramatically increased with the content of GMA. Their interfaces were observed as being blurred by using SEM and TEM and a crack that could be seen in the case of the interfaces of the PA1010 and the plain PP disappeared.展开更多
Polypropylene(PP)and polyethylene(PE)play central roles in our daily life.However,their immiscibility presents a major hurdle in both industry and academia when recycling them into alloys with favorable mechanical pro...Polypropylene(PP)and polyethylene(PE)play central roles in our daily life.However,their immiscibility presents a major hurdle in both industry and academia when recycling them into alloys with favorable mechanical properties.Moreover,typical compatibilizer-enabled approaches are limited due to increased environmental concerns.Herein,inspired by a traditional Chinese technique,we report a facile,industry-scale methodology that produces a PP/PE binary blend with a highly ordered honeycomb nanostructure without any additives.Due to its nanostructure,the blend exhibits enhanced tensile properties in com-parison with the parent components or with a sample prepared using an internal mixer.This approach has potential for applications not only in immiscible polymer blending,but also in non-sorting,compatibilizer-free waste plastics recycling.Through this technique,we expect that an environmentally friendly and sustainable plastic wastes recycling avenue can be found,and great economic benefits can be gained.展开更多
Alloying and nanocompositing are two most effective techniques by which isotactic polypropylene(iPP), one of the most promising polymers of the 21 st century, can be endowed with high performance for ever-demanding hi...Alloying and nanocompositing are two most effective techniques by which isotactic polypropylene(iPP), one of the most promising polymers of the 21 st century, can be endowed with high performance for ever-demanding high-end applications. Thanks to the continuous advancement of catalyst technology, the technological trend for iPP alloy and nanocomposite fabrication has been projected to be in-reactor synthesis, the performance and economic advantages of which are beyond doubt. In this paper, we review two recent key developments in the iPP in-reactor alloy and in-reactor nanocomposite technology in our laboratory that will have profound influence on the continuing development of the prestigious iPP modification art. The first is the simultaneous EPR(ethylene-propylene random copolymer) cross-linking chemistry for controlling its physical growth pattern during in-reactor alloying, which helps to remove the compositional cap on EPR that so far greatly limits the iPP in-reactor alloying technique. The second is the nanofiller support fabrication strategy for simultaneously controlling both the phase morphology of the nanofiller dispersion and the polymer particle granule morphology of synthesized nanocomposites, which resolves the critical scale-up issue surrounding the iPP in-reactor nanocompositing technique. Based on these new developments, new advancements of iPP materials are envisaged.展开更多
基金This work was supported by the National Natural Science Foundation of China.
文摘The interface behavior of polyamide 1010 (PA1010) and polypropylene (PP) was studied. In order to improve their interfacial adhesion, functional PP was prepared by means of grafting glycidyl methacrylate (GMA) on PP main chains and used instead of plain PP. Several technological characterizations were performed here on their interfaces. ESCA was used to confirm that some kind of reaction occurred between end groups of PA1010 and epoxy species of PP-g-GMA. The peel test was adopted to measure interfacial adhesion. It was found that the fracture energy of interfaces between PA1010 and PP-g-GMA was dramatically increased with the content of GMA. Their interfaces were observed as being blurred by using SEM and TEM and a crack that could be seen in the case of the interfaces of the PA1010 and the plain PP disappeared.
基金National Key Research and Development Program of China (2019YFC1908202)the Key Program of National Natural Science Foundation of China (51435005)+1 种基金the National Natural Science Foundation of China (51403068)the China Postdoctoral Science Foundation (2019M652883) for the financial support of this work
文摘Polypropylene(PP)and polyethylene(PE)play central roles in our daily life.However,their immiscibility presents a major hurdle in both industry and academia when recycling them into alloys with favorable mechanical properties.Moreover,typical compatibilizer-enabled approaches are limited due to increased environmental concerns.Herein,inspired by a traditional Chinese technique,we report a facile,industry-scale methodology that produces a PP/PE binary blend with a highly ordered honeycomb nanostructure without any additives.Due to its nanostructure,the blend exhibits enhanced tensile properties in com-parison with the parent components or with a sample prepared using an internal mixer.This approach has potential for applications not only in immiscible polymer blending,but also in non-sorting,compatibilizer-free waste plastics recycling.Through this technique,we expect that an environmentally friendly and sustainable plastic wastes recycling avenue can be found,and great economic benefits can be gained.
基金supported by the National Natural Science Foundation of China(21574143,51373178)
文摘Alloying and nanocompositing are two most effective techniques by which isotactic polypropylene(iPP), one of the most promising polymers of the 21 st century, can be endowed with high performance for ever-demanding high-end applications. Thanks to the continuous advancement of catalyst technology, the technological trend for iPP alloy and nanocomposite fabrication has been projected to be in-reactor synthesis, the performance and economic advantages of which are beyond doubt. In this paper, we review two recent key developments in the iPP in-reactor alloy and in-reactor nanocomposite technology in our laboratory that will have profound influence on the continuing development of the prestigious iPP modification art. The first is the simultaneous EPR(ethylene-propylene random copolymer) cross-linking chemistry for controlling its physical growth pattern during in-reactor alloying, which helps to remove the compositional cap on EPR that so far greatly limits the iPP in-reactor alloying technique. The second is the nanofiller support fabrication strategy for simultaneously controlling both the phase morphology of the nanofiller dispersion and the polymer particle granule morphology of synthesized nanocomposites, which resolves the critical scale-up issue surrounding the iPP in-reactor nanocompositing technique. Based on these new developments, new advancements of iPP materials are envisaged.
