In order to improve the dimensional stability of wood-polymer composites, wood flour pre-treated by polyethylene glycol （PEG） at two different concentrations and then thermally treated at 140℃, was used as raw mate...In order to improve the dimensional stability of wood-polymer composites, wood flour pre-treated by polyethylene glycol （PEG） at two different concentrations and then thermally treated at 140℃, was used as raw material to produce wood flour/poly- propylene （PP） composites at a wood content of 40%. The structure of modified wood flour was analyzed with a scanning electron microscope （SEM） and its effect on the physical and mechanical properties of wood flour/PP composites was evaluated. The SEM results indicated the ＂bulking＂ effect of PEG on wood flour, which resulted in reduced water uptake. The combination of PEG and heat treatment further improved the moisture resistance of the composites. However, PEG modification had a negative effect on the flexural modulus of rupture （MOR） and the modulus of elasticity （MOE）; whereas heat treatment partly compensated for this reduc- tion. For dynamic mechanical properties, PEG treatment decreased the storage modulus （E＇）. However, the heat treatment resulted in an increase orE＇ of the wood flour/PP composites, with the temperature of loss factor peaks shifting to a higher temperature.展开更多
The grinding of ultra-fine talcum powder and its application in a polypropylene （PP） matrix were investigated. Ultra-fine talcum powder was prepared by adjusting the grinding parameters of the physical milling proce...The grinding of ultra-fine talcum powder and its application in a polypropylene （PP） matrix were investigated. Ultra-fine talcum powder was prepared by adjusting the grinding parameters of the physical milling process. The talcum powder exhibited polymodal distribution. The layered morphology of talcum particles in a horizontal sand mill was rarely damaged or destroyed. PP-talcum nanocomposites were prepared by melt blending using a twin-screw extruder. Nano talcum can be seen as a single particle, although it is not very apparent. The bending strength of talcum-filled PP was gradually increased by approximately 28%. The impact strength linearly decreased as the filler weight ratio increased. The overall maximum improvement in mechanical properties was recorded when the filler ratios increased from 15 wt% to 20 wt%.展开更多
Biaxial-oriented polypropylene (BOPP) thin films are currently used as dielectrics in state-of-the-art capacitors that show many advantages, such as low energy loss and high breakdown strength, but a limited energy de...Biaxial-oriented polypropylene (BOPP) thin films are currently used as dielectrics in state-of-the-art capacitors that show many advantages, such as low energy loss and high breakdown strength, but a limited energy density ( 600 MV/m. The PP-OH dielectric demonstrates a linear reversible charge storage behavior with high releasing energy density > 7 J/cm3 (2 - 3 times of BOPP) after an applied electric field at E = 600 MV/m, without showing any significant increase of energy loss and remnant polarization at zero electric field. On the other hand, a cross-linked polypropylene (x-PP) exhibits an ε ~ 3, which is independent of a wide range of temperatures and frequencies, slim polarization loops, high breakdown strength (E = 650 MV/m), narrow breakdown distribution, and reliable energy storage capacity > 5 J/cm3 (double that of state-of-the-art BOPP capacitors), without showing any increase in energy loss.展开更多
Viscoelastic properties of maleated polypropylene （MAPP）-modified wood flour/polypropylene composites （WPC） were investigated by both a compression stress relaxation method and dynamic mechanical analyses （DMA）....Viscoelastic properties of maleated polypropylene （MAPP）-modified wood flour/polypropylene composites （WPC） were investigated by both a compression stress relaxation method and dynamic mechanical analyses （DMA）. Three wood to polymer ratios （40：60, 60：40, and 80：20） and five MAPP loading levels （0, 1, 2, 4 and 8%） were used to study their effects on the viscoelastic prop- erties of MAPP-WPC. The results show that： 1） higher wood to polymer ratio corresponds to higher stress relaxation levels for unmodified WPC. The modification with MAPP has an obvious effect on the stress relaxation of MAPP-WPC at higher wood to polymer ratios （60：40 and 80：20）, but almost no effect at the 40：60 wood to polymer ratio. The optimal MAPP loading level for the wood to polymer ratio of 60：40 appears at 1%; 2） the storage modulus reaches its maximum at a MAPP loading level of 1% for wood to polymer ratios of 40：60 and 60：40, while for the 80：20 wood to polymer ratio, a higher storage modulus is observed at higher MAPP loading levels, which is quite consistent with the stress relaxation results. The results suggested that a suitable loading level of MAPP has a positive effect on the viscoelastic properties of WPC at higher wood to polymer ratios. Excessive MAPP loading would have resulted in adverse effects.展开更多
The products of expanded polypropylene（EPP） is widely explored and used. the PP modification methods, the preparation methods of EPP and the molding technology of EPP were reviewed. The application of EPP in the fie...The products of expanded polypropylene（EPP） is widely explored and used. the PP modification methods, the preparation methods of EPP and the molding technology of EPP were reviewed. The application of EPP in the field of sporting equipment were also discussed. This paper may provide theoretical foundation for the applications and developments of EPP.展开更多
This study explores the coupling effect of pond ash(PA)and polypropylene(PP)fiber to control the strength and durability of expansive soil.The PA is used to chemically treat the expansive soil and PP fiber is adopted ...This study explores the coupling effect of pond ash(PA)and polypropylene(PP)fiber to control the strength and durability of expansive soil.The PA is used to chemically treat the expansive soil and PP fiber is adopted as reinforcement against tensile cracking.The sustainable use of PA and PP fiber are demonstrated by performing mechanical(i.e.unconfined compressive strength,split tensile strength and ultrasonic pulse velocity),chemical(pH value,electrical conductivity and calcite content),and microstructural analyses before and after 2nd,4th,6th,8th and 10th freezing-thawing(F-T)cycles.Three curing methods with 7 d,14 d and 28 d curing periods are considered to reinforce the 5%,10%,15%and 20%PA-stabilized expansive soil with 0.25%,0.5%and 1%PP fiber.In order to develop predictive models for mechanical and durability parameters,the experimental data are processed utilizing artificial neural network(ANN),in association with the leave-one-out cross-validation(LOOCV)as a resampling method and three different activation functions.The mechanical and durability properties of the PA-stabilized expansive soil subgrades are increased with PP fiber reinforcement.The results of ANN modeling predict the mechanical properties perfectly,and the correlation coefficient(R)approaches up to 0.96.展开更多
Hydrophobic magnesium hydroxide(MH) nanoparticles were prepared by a one-step synthesis method in a high-gravity environment generated by a novel impinging stream–rotating packed bed(IS-RPB) reactor. The reactant sol...Hydrophobic magnesium hydroxide(MH) nanoparticles were prepared by a one-step synthesis method in a high-gravity environment generated by a novel impinging stream–rotating packed bed(IS-RPB) reactor. The reactant solutions were simultaneously and continuously pumped into the IS-RPB reactor, and then Tween80 was added as a surface modifier. The morphology, structure, and properties of blank and hydrophobic MH were characterized. The effects of MH nanoparticles on the flame retardancy, thermal stability, and mechanical properties of PP/MH composites were also studied. We found that the obtained MH nanoparticles exhibited hexagonal lamella with a mean size of 30 nm, excellent hydrophobic properties(e.g., high water contact angle of 112°), and improved thermal stability of MH. The limiting oxygen index(LOI) further showed that increased MH loading can significantly improve flame-retardant performance, which reached 29.3% for PP/MH composites with 30 wt% hydrophobic samples. The thermal stability and mechanical properties of the PP/MH composites with hydrophobic samples were also much higher than those of PP/MH composites with blank MH. Results showed that the one-step synthesis had high potential application in the large-scale production of hydrophobic MH nanoparticles.展开更多
Day by day worldwide use of plastics is increasing because of their light weight and durable characteristics. Waste plastics are major environmental problems all over the world. Waste plastics are not bio-degradable, ...Day by day worldwide use of plastics is increasing because of their light weight and durable characteristics. Waste plastics are major environmental problems all over the world. Waste plastics are not bio-degradable, it remains in the landfill for a long period of time causing vegetation and aquatic ecosystem dilemmas. Abandoned waste plastic thrown into the ocean causes friction of ocean waves and then broken down by sunlight into small pieces and takes the shape of plastic like soup. Aquatic organism mistakes the plastic soup as their food and can’t digest, either they die or through food chain it affects human health. To avoid severe environmental degradation problems of waste plastics some countries and big cities banned or restricted the use of plastic products. The worldwide generation of waste plastics is approximately 280 million tons/year. All most all of these waste plastics are dumped either in land or ocean. City municipalities spend huge amount of money each year just to dispose of these waste plastics into landfill because most waste plastics are not recycled. When the waste plastics are subjected to incineration, they release harmful toxic gas into the environment causing severe pollution. These waste plastics gradually enhance the hazardous environmental problems. Generally plastics are made from crude oil, however crude oil is a very limited natural resource and non-renewable. Every year millions of barrels of crude oil are to produce the waste plastics and when plastics are discarded after use the energy source is lost. A new developed technology plan minimizes the environment pollution problems simultaneously boost up energy sector by renovating the waste plastics into high energy content fuel. The produced fuel is obtained using a unique thermal degradation of waste plastics and converting them into hydrocarbon fuel like materials. Preliminary tests proved that this fuel burns cleaner and the production cost is very low. Unique production setup demonstrated to produce 93% fuel from waste plastic in the pilot scale. The Fuel produced has been tested and proven to work on majority types of internal combustion engines. This technology utilized can avoid waste plastic pollution problem worldwide by the implementation of newly developed technology. Through the utilization of the technology the use of reliable plastics won’t need to be banned and serve as a very reliable alternate source of energy. The technology will also help reduce a significant amount of import oil from foreign countries and help provide a steady economy.展开更多
In this paper, a set of ultrasonic vibration device connecting with small angle light scattering(SALS) for in-situ observing phase-transition of polymer under ultrasonic vibration was established. The experiments for ...In this paper, a set of ultrasonic vibration device connecting with small angle light scattering(SALS) for in-situ observing phase-transition of polymer under ultrasonic vibration was established. The experiments for verifying polypropylene(PP) indicated that ultrasonic vibration resulted in the decrease of the crystallization rate and made PP crystallizable at low temperature.展开更多
The SDG-HAZOP(Signed Directed Graph,Hazard and Operability Analysis) is a qualitative safety assessment method,which is comprehensive,systematic and complete.However the result is tedious and large.Fault tree analysis...The SDG-HAZOP(Signed Directed Graph,Hazard and Operability Analysis) is a qualitative safety assessment method,which is comprehensive,systematic and complete.However the result is tedious and large.Fault tree analysis(FTA) is a logical and diagrammatic method,which is proved to be a useful quantitative analysis tool to evaluate the safety and reliability of complex systems.So a FTA based on SDG-HAZOP quantitative method was proposed in this paper.Firstly,the SDG-HAZOP and the FTA were established on the background of polypropylene production devices in the Sinopec Wuhan Branch.Secondly,the probability of top event was calculated by reliable data from the probability of basic events.Finally,the targeted measures were proposed to prevent fatal potential dangerous situations by probability calculation.展开更多
Our work aims to evaluate a complete outlook of virgin high density polyethylene (HDPE) and polypropylene (PP) polyblends. Virgin PP of 20, 30 and 50 weight% is compounded with virgin HDPE. The properties like tensile...Our work aims to evaluate a complete outlook of virgin high density polyethylene (HDPE) and polypropylene (PP) polyblends. Virgin PP of 20, 30 and 50 weight% is compounded with virgin HDPE. The properties like tensile strength, flexural strength, Izod impact strength are examined. Scanning electron microscopy (SEM) and polarised light microscopy (PLM) are used to observe the surface and crystal morphology. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) tests verify the non compatibility of both polymers. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques are used to study the thermal behaviour of composites. The results manifest co-occurring spherulites for polyblends;indicating the composite to be a physical blend of continuous and dispersed phases, but on the other hand PP improves the tensile and flexural properties of HDPE.展开更多
基金supported by the National Natural Science Foundation of China (Grant No.30871966)
文摘In order to improve the dimensional stability of wood-polymer composites, wood flour pre-treated by polyethylene glycol （PEG） at two different concentrations and then thermally treated at 140℃, was used as raw material to produce wood flour/poly- propylene （PP） composites at a wood content of 40%. The structure of modified wood flour was analyzed with a scanning electron microscope （SEM） and its effect on the physical and mechanical properties of wood flour/PP composites was evaluated. The SEM results indicated the ＂bulking＂ effect of PEG on wood flour, which resulted in reduced water uptake. The combination of PEG and heat treatment further improved the moisture resistance of the composites. However, PEG modification had a negative effect on the flexural modulus of rupture （MOR） and the modulus of elasticity （MOE）; whereas heat treatment partly compensated for this reduc- tion. For dynamic mechanical properties, PEG treatment decreased the storage modulus （E＇）. However, the heat treatment resulted in an increase orE＇ of the wood flour/PP composites, with the temperature of loss factor peaks shifting to a higher temperature.
基金Funded by the Foundation of Shanghai Science and Technology Committee (Nos.10521100602, 10DZ2211400)Foundation of Guangdong Province (No.2011A090200082)China Postdoctoral Science Foundation, and Research Foundation for the Excellent Youth Scholars of Shanghai(No.SHU-10057)
文摘The grinding of ultra-fine talcum powder and its application in a polypropylene （PP） matrix were investigated. Ultra-fine talcum powder was prepared by adjusting the grinding parameters of the physical milling process. The talcum powder exhibited polymodal distribution. The layered morphology of talcum particles in a horizontal sand mill was rarely damaged or destroyed. PP-talcum nanocomposites were prepared by melt blending using a twin-screw extruder. Nano talcum can be seen as a single particle, although it is not very apparent. The bending strength of talcum-filled PP was gradually increased by approximately 28%. The impact strength linearly decreased as the filler weight ratio increased. The overall maximum improvement in mechanical properties was recorded when the filler ratios increased from 15 wt% to 20 wt%.
文摘Biaxial-oriented polypropylene (BOPP) thin films are currently used as dielectrics in state-of-the-art capacitors that show many advantages, such as low energy loss and high breakdown strength, but a limited energy density ( 600 MV/m. The PP-OH dielectric demonstrates a linear reversible charge storage behavior with high releasing energy density > 7 J/cm3 (2 - 3 times of BOPP) after an applied electric field at E = 600 MV/m, without showing any significant increase of energy loss and remnant polarization at zero electric field. On the other hand, a cross-linked polypropylene (x-PP) exhibits an ε ~ 3, which is independent of a wide range of temperatures and frequencies, slim polarization loops, high breakdown strength (E = 650 MV/m), narrow breakdown distribution, and reliable energy storage capacity > 5 J/cm3 (double that of state-of-the-art BOPP capacitors), without showing any increase in energy loss.
基金supported by the National Natural Science Foundation of China (Grant No. 30871966)
文摘Viscoelastic properties of maleated polypropylene （MAPP）-modified wood flour/polypropylene composites （WPC） were investigated by both a compression stress relaxation method and dynamic mechanical analyses （DMA）. Three wood to polymer ratios （40：60, 60：40, and 80：20） and five MAPP loading levels （0, 1, 2, 4 and 8%） were used to study their effects on the viscoelastic prop- erties of MAPP-WPC. The results show that： 1） higher wood to polymer ratio corresponds to higher stress relaxation levels for unmodified WPC. The modification with MAPP has an obvious effect on the stress relaxation of MAPP-WPC at higher wood to polymer ratios （60：40 and 80：20）, but almost no effect at the 40：60 wood to polymer ratio. The optimal MAPP loading level for the wood to polymer ratio of 60：40 appears at 1%; 2） the storage modulus reaches its maximum at a MAPP loading level of 1% for wood to polymer ratios of 40：60 and 60：40, while for the 80：20 wood to polymer ratio, a higher storage modulus is observed at higher MAPP loading levels, which is quite consistent with the stress relaxation results. The results suggested that a suitable loading level of MAPP has a positive effect on the viscoelastic properties of WPC at higher wood to polymer ratios. Excessive MAPP loading would have resulted in adverse effects.
基金Funded by the Development Strategy Project of Hubei(20120014)
文摘The products of expanded polypropylene（EPP） is widely explored and used. the PP modification methods, the preparation methods of EPP and the molding technology of EPP were reviewed. The application of EPP in the field of sporting equipment were also discussed. This paper may provide theoretical foundation for the applications and developments of EPP.
文摘This study explores the coupling effect of pond ash(PA)and polypropylene(PP)fiber to control the strength and durability of expansive soil.The PA is used to chemically treat the expansive soil and PP fiber is adopted as reinforcement against tensile cracking.The sustainable use of PA and PP fiber are demonstrated by performing mechanical(i.e.unconfined compressive strength,split tensile strength and ultrasonic pulse velocity),chemical(pH value,electrical conductivity and calcite content),and microstructural analyses before and after 2nd,4th,6th,8th and 10th freezing-thawing(F-T)cycles.Three curing methods with 7 d,14 d and 28 d curing periods are considered to reinforce the 5%,10%,15%and 20%PA-stabilized expansive soil with 0.25%,0.5%and 1%PP fiber.In order to develop predictive models for mechanical and durability parameters,the experimental data are processed utilizing artificial neural network(ANN),in association with the leave-one-out cross-validation(LOOCV)as a resampling method and three different activation functions.The mechanical and durability properties of the PA-stabilized expansive soil subgrades are increased with PP fiber reinforcement.The results of ANN modeling predict the mechanical properties perfectly,and the correlation coefficient(R)approaches up to 0.96.
基金Supported by the National Natural Science Foundation of China(21376229)the Science and Technology of Shanxi Province(2015031019-5)the Natural Science Foundation for Young Scientists of Shanxi Province(2015021033)
文摘Hydrophobic magnesium hydroxide(MH) nanoparticles were prepared by a one-step synthesis method in a high-gravity environment generated by a novel impinging stream–rotating packed bed(IS-RPB) reactor. The reactant solutions were simultaneously and continuously pumped into the IS-RPB reactor, and then Tween80 was added as a surface modifier. The morphology, structure, and properties of blank and hydrophobic MH were characterized. The effects of MH nanoparticles on the flame retardancy, thermal stability, and mechanical properties of PP/MH composites were also studied. We found that the obtained MH nanoparticles exhibited hexagonal lamella with a mean size of 30 nm, excellent hydrophobic properties(e.g., high water contact angle of 112°), and improved thermal stability of MH. The limiting oxygen index(LOI) further showed that increased MH loading can significantly improve flame-retardant performance, which reached 29.3% for PP/MH composites with 30 wt% hydrophobic samples. The thermal stability and mechanical properties of the PP/MH composites with hydrophobic samples were also much higher than those of PP/MH composites with blank MH. Results showed that the one-step synthesis had high potential application in the large-scale production of hydrophobic MH nanoparticles.
文摘Day by day worldwide use of plastics is increasing because of their light weight and durable characteristics. Waste plastics are major environmental problems all over the world. Waste plastics are not bio-degradable, it remains in the landfill for a long period of time causing vegetation and aquatic ecosystem dilemmas. Abandoned waste plastic thrown into the ocean causes friction of ocean waves and then broken down by sunlight into small pieces and takes the shape of plastic like soup. Aquatic organism mistakes the plastic soup as their food and can’t digest, either they die or through food chain it affects human health. To avoid severe environmental degradation problems of waste plastics some countries and big cities banned or restricted the use of plastic products. The worldwide generation of waste plastics is approximately 280 million tons/year. All most all of these waste plastics are dumped either in land or ocean. City municipalities spend huge amount of money each year just to dispose of these waste plastics into landfill because most waste plastics are not recycled. When the waste plastics are subjected to incineration, they release harmful toxic gas into the environment causing severe pollution. These waste plastics gradually enhance the hazardous environmental problems. Generally plastics are made from crude oil, however crude oil is a very limited natural resource and non-renewable. Every year millions of barrels of crude oil are to produce the waste plastics and when plastics are discarded after use the energy source is lost. A new developed technology plan minimizes the environment pollution problems simultaneously boost up energy sector by renovating the waste plastics into high energy content fuel. The produced fuel is obtained using a unique thermal degradation of waste plastics and converting them into hydrocarbon fuel like materials. Preliminary tests proved that this fuel burns cleaner and the production cost is very low. Unique production setup demonstrated to produce 93% fuel from waste plastic in the pilot scale. The Fuel produced has been tested and proven to work on majority types of internal combustion engines. This technology utilized can avoid waste plastic pollution problem worldwide by the implementation of newly developed technology. Through the utilization of the technology the use of reliable plastics won’t need to be banned and serve as a very reliable alternate source of energy. The technology will also help reduce a significant amount of import oil from foreign countries and help provide a steady economy.
文摘In this paper, a set of ultrasonic vibration device connecting with small angle light scattering(SALS) for in-situ observing phase-transition of polymer under ultrasonic vibration was established. The experiments for verifying polypropylene(PP) indicated that ultrasonic vibration resulted in the decrease of the crystallization rate and made PP crystallizable at low temperature.
文摘The SDG-HAZOP(Signed Directed Graph,Hazard and Operability Analysis) is a qualitative safety assessment method,which is comprehensive,systematic and complete.However the result is tedious and large.Fault tree analysis(FTA) is a logical and diagrammatic method,which is proved to be a useful quantitative analysis tool to evaluate the safety and reliability of complex systems.So a FTA based on SDG-HAZOP quantitative method was proposed in this paper.Firstly,the SDG-HAZOP and the FTA were established on the background of polypropylene production devices in the Sinopec Wuhan Branch.Secondly,the probability of top event was calculated by reliable data from the probability of basic events.Finally,the targeted measures were proposed to prevent fatal potential dangerous situations by probability calculation.
文摘Our work aims to evaluate a complete outlook of virgin high density polyethylene (HDPE) and polypropylene (PP) polyblends. Virgin PP of 20, 30 and 50 weight% is compounded with virgin HDPE. The properties like tensile strength, flexural strength, Izod impact strength are examined. Scanning electron microscopy (SEM) and polarised light microscopy (PLM) are used to observe the surface and crystal morphology. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) tests verify the non compatibility of both polymers. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques are used to study the thermal behaviour of composites. The results manifest co-occurring spherulites for polyblends;indicating the composite to be a physical blend of continuous and dispersed phases, but on the other hand PP improves the tensile and flexural properties of HDPE.
