Polysulfone Membranes via Thermally Induced Phase Separation

Polysulfone （PSF） membranes have gained great attention in the fields of ultrafiltration, microfiltration, and thin film composite membranes for nanofiltration or reverse osmosis. For the first time, it is proposed to fabricate PSF membranes via thermally induced phase separation （TIPS） process using diphenyl sulfone （DPSO2） and polyethylene glycol （PEG） as mixed diluent. DPSO2 is chosen as a crystallizable diluent, while PEG is considered in terms of molecular weight （Mw） and dosage. We systematically investigate the interactions between PSF, DPSO2 and PEG based on the simulation calculations and solubility parameter theory. It is inferred that DPSO2 has an excellent compatibility with PSF, and the addition of PEG results in the ternary system thermodynamically less stable and then facilitates its liquid-liquid （L-L） phase separation. SEM images indicate that cellular-like pores are obvious throughout the membrane when the PEG content in the mixed diluent is 25 wt%-35 wt%. We can facilely manipulate the pore size, water flux and mechanical properties of PSF membranes with the dosage of PEG-200, the Mw of PEG or the cooling rate. The successful application of TIPS can provide a new approach for structure manipulation and performance enhancement of PSF membranes.

Strengthening of polysulfone membranes using hybrid mixtures of micro- and nano-scale modifiers

Polysulfone （PSf） membranes were modified by either a new organic modifier （sulfonated poly（ether sulfide sulfone）, SPESS） or a traditional modifier （rice hulk）. These membranes were further reinforced with either multi-walled carbon nanotubes （MWCNTs） or silica nanoparticles. Having a dye rejection of 98.46%, the reinforced membranes increased more than 50% in strength but no change in solution flux was observed. The morphological and roughness studies were conducted using scanning electron microscopy and atomic force microscopy. Moreover, the PSF membranes were also characterized by differential scanning calorimetry. Modifying the membranes with organic modifier or nanofiller increases the glass transition temperature （Tg）. The highest Tg and strength were observed for the PSf-SPESS- MWCNT membrane. SPESS decreases surface roughness but MWCNT increases roughness on the nanoscale. All membranes show a bimodal pore size distribution, whereas the PSf-SPESS-MWCNT membrane exhibits a relatively uniform distribution of macroscopic and microscopic pores.

Gas-initiation under UV and liquid-grafting polymerization on the surface of polysulfone hollow fiber ultrafiltration membrane by dynamic method

Using the inner-surface of polysulfone hollow fiber ultrafiltration membranes as grafted layer, the method of gas-initiation and liquid-polymerization has been studied, which aimed to adjust the diameter of the pores in the membranes. The degree of polymerization varied with the changes of the parameters, such as irradiation time, monomer concentration, temperature and time of polymerization and so on. The results indicated that using benzophenone(BP) which is in a gaseous condition as photo-initiator, acrylamide as graft monomer, the polyacrylamide chain was grafted on the surface of membranes. After the surface membrane being modified, the water flux and retention altered,and thus it can be seen that the diameter of the pores in the membrane was altered. These experiments contribute to finding a new way to produce the hollow fiber membrane with the small pore size and are extraordinarily worth developing and studying.

Mixed Matrix Membranes of Polysulfone/Polyimide Reinforced with Modified Zeolite Based Filler: Preparation, Properties and Application

In this work, polysulfone/polyimide（PSf/PI） mixed matrix membranes were fabricated by reinforcement of modified zeolite（MZ） particles through solution casting method for investigation of antibacterial activity against two gram negative bacteria（Salmonella typhi, Klebsella pneumonia） and two gram positive bacteria（Staphylococcus aureus, Bacillus subtilis）. The modified zeolite particles were incorporated to PSf and PI matrix and the influence of these particles on thermal, mechanical and structural properties was evaluated. The morphological evolution was investigated through scanning electron microscopy（SEM） and transmission electron microscopy（TEM） analysis, which revealed good compatibility between organic polymer matrix and inorganic filler. Mechanical stability was investigated by tensile testing while thermal analysis was evaluated by thermogravimetric analysis（TGA） and differential scanning calorimetry（DSC）. This revealed improvement in thermal properties with increasing filler concentration from 1 wt% to 10 wt%. Structural analysis was successfully done using X-ray diffraction analysis（XRD） and Fourier transform infrared（FTIR） spectroscopy. Solvent content of fabricated mixed matrix membranes was observed to decrease while moving from more hydrophilic to less hydrophilic solvent. However, addition of filler content enhanced the porosity of fabricated membranes. The synthesized mixed matrix membranes exhibited good antibacterial activity and the highest activity was shown by PSf/PI/MZ mixed matrix membrane. Therefore, the combination effect of PSf, PI and MZ sufficiently enhanced the antibacterial activity of mixed matrix membranes.