液滴撞击固体表面是自然界的常见现象,研究超疏水表面的液滴撞击对其润湿性的影响,对于超疏水性材料的潜在应用具有重要的科学意义。采用3、10、20 min氧等离子体处理(OPT)和1 min八氟环丁烷等离子体聚合沉积(PPD)的等离子体方法改性聚...液滴撞击固体表面是自然界的常见现象,研究超疏水表面的液滴撞击对其润湿性的影响,对于超疏水性材料的潜在应用具有重要的科学意义。采用3、10、20 min氧等离子体处理(OPT)和1 min八氟环丁烷等离子体聚合沉积(PPD)的等离子体方法改性聚四氟乙烯(PTFE)表面,获得具有不同尺寸和间距的微/纳米锥的超疏水PTFE表面,研究射频等离子体改性PTFE表面的液滴静态接触角、滚动角及液滴撞击动力学行为,分析在不同个数液滴撞击后PTFE表面的润湿性和液滴撞击行为变化,确定PTFE表面液滴撞击起电效应的影响机制。结果表明:通过1~9个液滴撞击后,PTFE表面的静态接触角随撞击液滴数量增加而减小,导致静态接触角低于150°;液滴滚动角随撞击液滴数量增加而增大,造成液滴滚动角高于10°。撞击液滴的接触时间随撞击液滴数量增加而增大,回弹系数随撞击液滴数量增加而减小。随撞击液滴数量增加,回弹液滴的正电荷和PTFE表面的负电压增大,PTFE表面的负电荷对液滴产生强吸引作用,导致低粘附超疏水性被破坏。3 min OPT和1 min PPD改性PTFE表面的纳米锥间距小,密度大,表面负电荷量增加明显,造成PTFE表面的疏水性降低的程度最显著。研究结果可为改善超疏水稳定性的表面织构设计提供理论依据。展开更多
A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTF...A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.展开更多
文摘液滴撞击固体表面是自然界的常见现象,研究超疏水表面的液滴撞击对其润湿性的影响,对于超疏水性材料的潜在应用具有重要的科学意义。采用3、10、20 min氧等离子体处理(OPT)和1 min八氟环丁烷等离子体聚合沉积(PPD)的等离子体方法改性聚四氟乙烯(PTFE)表面,获得具有不同尺寸和间距的微/纳米锥的超疏水PTFE表面,研究射频等离子体改性PTFE表面的液滴静态接触角、滚动角及液滴撞击动力学行为,分析在不同个数液滴撞击后PTFE表面的润湿性和液滴撞击行为变化,确定PTFE表面液滴撞击起电效应的影响机制。结果表明:通过1~9个液滴撞击后,PTFE表面的静态接触角随撞击液滴数量增加而减小,导致静态接触角低于150°;液滴滚动角随撞击液滴数量增加而增大,造成液滴滚动角高于10°。撞击液滴的接触时间随撞击液滴数量增加而增大,回弹系数随撞击液滴数量增加而减小。随撞击液滴数量增加,回弹液滴的正电荷和PTFE表面的负电压增大,PTFE表面的负电荷对液滴产生强吸引作用,导致低粘附超疏水性被破坏。3 min OPT和1 min PPD改性PTFE表面的纳米锥间距小,密度大,表面负电荷量增加明显,造成PTFE表面的疏水性降低的程度最显著。研究结果可为改善超疏水稳定性的表面织构设计提供理论依据。
基金This work was supported by the National Natural Science Foundation of China(No.51571033,11804022)the Science and Technology on Transient Impact Laboratory Foundation(No.6142606183208).
文摘A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.
基金supported by the Open Project of State Key Laboratory of Environment-friendly Energy Materials, China (No. 19kfgh07)R&D of Key Technology of Light Metal Air Battery, Transformation and Industrialization of Scientific and Technological Achievements of Hunan Province, China (No. 2020GK2071)R&D of Key Technology and Materials of Magnesium Air Battery, Transformation of Scientific and Technological Achievements of Changsha City, China (No. Kh2005186)。
