A novel polymer/SiO2 hybrid emulsion(PAES)was prepared by directly mixing colloidal silica with polyacrylate emulsion(PAE)modified by a saline coupling agent.The sol-gel-derived thin films were obtained by addition of...A novel polymer/SiO2 hybrid emulsion(PAES)was prepared by directly mixing colloidal silica with polyacrylate emulsion(PAE)modified by a saline coupling agent.The sol-gel-derived thin films were obtained by addition of co-solvents into the PAES.The effects ofγ-methacryloxypropyltrimethoxysilane(KH-570)content and co-solvent on the properties of PAES films were investigated.Dynamic laser scattering(DLS)data indicate that the average diameter of PAES(96 nm)is slightly larger than that of PAE(89 nm).Transmission electron microscopy (TEM)photo discloses that colloidal silica particles are dispersed uniformly around polyacrylate particles and some of the colloidal silica particles are adsorbed on the surface of PAE particles.The crosslinking degree data and Fourier transform infrared(FT-IR)spectra confirm that the chemical structure of the PAES is changed to form Si-O-Si-polymer crosslinking networks during the film formation.Atomic force microscope(AFM)photos show the solvent induced sol-gel process of colloidal silica and the Si-based polymer distribution on the film surface of the dried PAES.Thermogravimetric analysis(TGA)curves demonstrate that the PAES films display much better thermal stability than PAE.展开更多
Comprehensive Summary Metal nanoparticles(NPs)decorated block copolymer(BCP)hybrid nanoparticles have attracted enormous attention for their actual value in catalysis,medical therapy,and bioengineering.The confined as...Comprehensive Summary Metal nanoparticles(NPs)decorated block copolymer(BCP)hybrid nanoparticles have attracted enormous attention for their actual value in catalysis,medical therapy,and bioengineering.The confined assembly of BCPs within evaporative emulsion droplet is verified as an effective method to provide polymeric scaffolds to load metal NPs.However,to date,it remains challenging to generate different types of metal NPs decorated BCP hybrid nanoparticles.Herein,we employed the emulsion confined self-assembly of poly(styrene-b-2-vinylpyridine)(PS-b-P2VP)and the followed seed-mediated growth of Au and palladium(Pd)NPs onto well-defined BCP particles to design a series of Au/Pd decorated BCP hybrid nanoparticles,which exhibited excellent catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol with the reductant of NaBH4.This work may inspire more researchers to investigate the selective decoration of different metal NPs onto the polymeric scaffolds,broadening the potential applications of the inorganic/organic hybrid nanoparticles.展开更多
A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size an...A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were actually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.展开更多
The generation and controlled or uncontrolled release of hydrocarbon-contaminated industrial wastewater effluents to water matrices are a major environmental concern.The contaminated water comes to surface in the form...The generation and controlled or uncontrolled release of hydrocarbon-contaminated industrial wastewater effluents to water matrices are a major environmental concern.The contaminated water comes to surface in the form of stable emulsions,which sometimes require different techniques to mitigate or separate effectively.Both the crude emulsions and hydrocarbon-contaminated wastewater effluents contain suspended solids,oil/grease,organic matter,toxic elements,salts,and recalcitrant chemicals.Suitable treatment of crude oil emulsions has been one of the most important challenges due to the complex nature and the substantial amount of generated waste.Moreover,the recovery of oil from waste will help meet the increasing demand for oil and its derivatives.In this context,functional nanostructured materials with smart surfaces and switchable wettability properties have gained increasing attention because of their excellent performance in the separation of oil–water emulsions.Recent improvements in the design,composition,morphology,and fine-tuning of polymeric nanostructured materials have resulted in enhanced demulsification functionalities.Herein,we reviewed the environmental impacts of crude oil emulsions and hydrocarbon-contaminated wastewater effluents.Their effective treatments by smart polymeric nanostructured materials with wettability properties have been stated with suitable examples.The fundamental mechanisms underpinning the efficient separation of oil–water emulsions are discussed with suitable examples along with the future perspectives of smart materials.展开更多
We demonstrated a method to fabricate functional hybrid film patches that were used to form Pickering emulsions （PEs）. The hybrid patches were made of carbon nanotubes, Fe3O4 nanoparticles, octadecyltrimethoxysilane...We demonstrated a method to fabricate functional hybrid film patches that were used to form Pickering emulsions （PEs）. The hybrid patches were made of carbon nanotubes, Fe3O4 nanoparticles, octadecyltrimethoxysilane, and poly（diallyldimethylammonium chloride）. The aqueous phase of the hybridpatch stabilized PEs can be easily separated by applying a magnetic field. The hybrid-film-patch stabilized PEs are extremely stable and lasted for eight months at room temperature. Furthermore, they are easily ruptured by adding ethanol, and regenerated by vortexing the patches in aqueous/oil mixtures, enabling the inner hydrophilic side of the patches to be easily modified with metal nanoparticles. As an example, palladium nanoparticles were embedded into the surface of the hybrid patches using an in situ reduction method. The Pd functionalized patch formed PEs showed an excellent catalytic performance for the hydrogenation of acetone with a yield of 99.5%. The same batch of Pd functionalized patches was recycled 13 times without loss of the catalytic activity. The hybrid-patch formed PEs have a great potential in the catalytic field.展开更多
基金Supported by the Program for New Century Excellent Talents in University（NCET-08-0204） National Natural Science Foundation of China（20976060） the Scientific Research Foundation for the Returned Overseas Chinese Scholars State Edu-cation Ministry （China）
文摘A novel polymer/SiO2 hybrid emulsion(PAES)was prepared by directly mixing colloidal silica with polyacrylate emulsion(PAE)modified by a saline coupling agent.The sol-gel-derived thin films were obtained by addition of co-solvents into the PAES.The effects ofγ-methacryloxypropyltrimethoxysilane(KH-570)content and co-solvent on the properties of PAES films were investigated.Dynamic laser scattering(DLS)data indicate that the average diameter of PAES(96 nm)is slightly larger than that of PAE(89 nm).Transmission electron microscopy (TEM)photo discloses that colloidal silica particles are dispersed uniformly around polyacrylate particles and some of the colloidal silica particles are adsorbed on the surface of PAE particles.The crosslinking degree data and Fourier transform infrared(FT-IR)spectra confirm that the chemical structure of the PAES is changed to form Si-O-Si-polymer crosslinking networks during the film formation.Atomic force microscope(AFM)photos show the solvent induced sol-gel process of colloidal silica and the Si-based polymer distribution on the film surface of the dried PAES.Thermogravimetric analysis(TGA)curves demonstrate that the PAES films display much better thermal stability than PAE.
基金the financial support of the Natural Science Foundation of China(52003070)Zhejiang Provincial Natural Science Foundation of China(LR20E030003).
文摘Comprehensive Summary Metal nanoparticles(NPs)decorated block copolymer(BCP)hybrid nanoparticles have attracted enormous attention for their actual value in catalysis,medical therapy,and bioengineering.The confined assembly of BCPs within evaporative emulsion droplet is verified as an effective method to provide polymeric scaffolds to load metal NPs.However,to date,it remains challenging to generate different types of metal NPs decorated BCP hybrid nanoparticles.Herein,we employed the emulsion confined self-assembly of poly(styrene-b-2-vinylpyridine)(PS-b-P2VP)and the followed seed-mediated growth of Au and palladium(Pd)NPs onto well-defined BCP particles to design a series of Au/Pd decorated BCP hybrid nanoparticles,which exhibited excellent catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol with the reductant of NaBH4.This work may inspire more researchers to investigate the selective decoration of different metal NPs onto the polymeric scaffolds,broadening the potential applications of the inorganic/organic hybrid nanoparticles.
基金Supported by the National "863" Project (No. 2001 AA 320206)and Shanghai Nano Special Foundation(No. 0120nm034).
文摘A poly (St-co-BA) latex was successfully synthesized by using an organic-inorganic hybrid compound (OIHC), an aliphatic carboxylate sodium/nano-silica composite, as the emulsifier, and investigated by particle size analyzer, transmission electron microscope (TEM), optical contact angle measurement (OCA) and dynamic mechanical analyzer (DMA). It was found that the protective agent, sodium polyacrylate (PA),could obviously improve the polymerization stability and the functional monomer, glycidyl methacrylate (GMA), could enhance the store stability of the latex. The particle size of poly(St-co-BA) latex decreased and then leveled off as OIHC content increased. TEM shows that the prepared polymers were actually organic-inorganic nanocomposites, and these films have better waterproof property than those prepared by traditional poly(St-co-BA) latex or organic silicone modified poly(St-co-BA) latex. The nanocomposite polymer has much higher glass transition temperature than organic silicone modified poly(St-co-BA) polymer containing the same organic silicone content.
文摘The generation and controlled or uncontrolled release of hydrocarbon-contaminated industrial wastewater effluents to water matrices are a major environmental concern.The contaminated water comes to surface in the form of stable emulsions,which sometimes require different techniques to mitigate or separate effectively.Both the crude emulsions and hydrocarbon-contaminated wastewater effluents contain suspended solids,oil/grease,organic matter,toxic elements,salts,and recalcitrant chemicals.Suitable treatment of crude oil emulsions has been one of the most important challenges due to the complex nature and the substantial amount of generated waste.Moreover,the recovery of oil from waste will help meet the increasing demand for oil and its derivatives.In this context,functional nanostructured materials with smart surfaces and switchable wettability properties have gained increasing attention because of their excellent performance in the separation of oil–water emulsions.Recent improvements in the design,composition,morphology,and fine-tuning of polymeric nanostructured materials have resulted in enhanced demulsification functionalities.Herein,we reviewed the environmental impacts of crude oil emulsions and hydrocarbon-contaminated wastewater effluents.Their effective treatments by smart polymeric nanostructured materials with wettability properties have been stated with suitable examples.The fundamental mechanisms underpinning the efficient separation of oil–water emulsions are discussed with suitable examples along with the future perspectives of smart materials.
基金This work was supported by the National Natural Science Foundation of China （Nos. 21273059 and 21003032）, State Key Laboratory of Urban Water Resource and Environment （Harbin Institute of Technology） （No. 2014DX09）, the Fundamental Research Funds for the Central Universities （No. HIT. KISTP. 201407）, and Harbin Science and Technology Research Council （No. 2014RFXXJ063）.
文摘We demonstrated a method to fabricate functional hybrid film patches that were used to form Pickering emulsions （PEs）. The hybrid patches were made of carbon nanotubes, Fe3O4 nanoparticles, octadecyltrimethoxysilane, and poly（diallyldimethylammonium chloride）. The aqueous phase of the hybridpatch stabilized PEs can be easily separated by applying a magnetic field. The hybrid-film-patch stabilized PEs are extremely stable and lasted for eight months at room temperature. Furthermore, they are easily ruptured by adding ethanol, and regenerated by vortexing the patches in aqueous/oil mixtures, enabling the inner hydrophilic side of the patches to be easily modified with metal nanoparticles. As an example, palladium nanoparticles were embedded into the surface of the hybrid patches using an in situ reduction method. The Pd functionalized patch formed PEs showed an excellent catalytic performance for the hydrogenation of acetone with a yield of 99.5%. The same batch of Pd functionalized patches was recycled 13 times without loss of the catalytic activity. The hybrid-patch formed PEs have a great potential in the catalytic field.
