Experiments were carried out to design polyvinyl alcohol （PVA） fiber reinforced cementitous composites （PVA-FRCCs） holding high ductility and energy consumption ability. Besides, the properties of each ingredients...Experiments were carried out to design polyvinyl alcohol （PVA） fiber reinforced cementitous composites （PVA-FRCCs） holding high ductility and energy consumption ability. Besides, the properties of each ingredients in composites, mixing method and technology for fresh mixture were described in detail. Then, the pseudo-strain-hardening （PSH） behavior was investigated in uniaxial tension test. As a result, the maximum ultimate tensile strain can reach 0.7 percent. On the other hand, the single edge notch （SEN） thin sheet specimens were employed to gain the normal tensile load via crack mouth opening displacement （CMOD） curves, which can show obvious PSH behavior. In addition, the curves can be divided into four zones whose fracture toughness calculation methods were discussed. The wedge splitting （WS） test method can be applied to discuss the fracture toughness. Moreover, fracture energy of SEN and WS specimens were both approximately evaluated.展开更多
In this paper, we deals with mechanical performance of resin impregnation with natural fiber and fiber reinforced composites. The effect of the addition of a rein impregnation process on static strength of the injecti...In this paper, we deals with mechanical performance of resin impregnation with natural fiber and fiber reinforced composites. The effect of the addition of a rein impregnation process on static strength of the injection molded composites was investigated by carrying out tensile and banding tests, followed by Scanning electron microscopy (SEM) observation of fiber surface and fracture surface of composites. The tensile strength of natural fiber and natural fiber reinforced composites with resin impregnation method increases with Polyvinyl alcohol (PVA) impregnation. In addition, Phenol resin impregnation recovers fiber tensile strength after alkali treatment. Resin impregnation causes decrease in contact surface area;however, it does not cause decrease in mechanical properties. Our results suggest that the using rein impregnation method has better effect on the mechanical properties of natural fiber reinforced Polypropylene (PP) composites.展开更多
Previously, Polyvinyl Alcohol (PVA) and phenolic resin were used for resin impregnated bamboo fiber reinforced PP composites which was manufactures for resin impregnated bamboo fiber with polypropylene (PP). Resin imp...Previously, Polyvinyl Alcohol (PVA) and phenolic resin were used for resin impregnated bamboo fiber reinforced PP composites which was manufactures for resin impregnated bamboo fiber with polypropylene (PP). Resin impregnation method can show improvement on tensile strength of fiber. However, to reduce the contact surface area and low inter-facial shear strength (IFSS) between impregnated resin and matrix, using 40% weight fraction of bamboo fiber in PP matrix, PVA impregnated composites with mean flexural and tensile strength 10% higher than untreated composites were produced butphenolic resin impregnated fiber reinforced composition’s mechanical properties were decreased. In this study maleic anhydride grafted polypropylene (MAPP) was used to increase interfacial shear strength between resin impregnated fiber and PP. With 10% MAPP, IFSS between resin impregnated fiber and PP increased more than 100% and reinforced composites. MAPP with untreated, phenolic resin and PVA impregnated cases showed similar mechanical properties. Yet in water absorption test, the PVA treatment with bamboo/PP composites increased water absorption ratio. But with 10% MAPP, matrix PP water absorption ratio decreased like phenolic resin impregnated fiber reinforced composites. 10% MAPP with resin impregnated bamboo fiber reinforced PP composites can improve IFSS, mechanical properties of composite and can decrease water absorption PVA resin impregnated bamboo fiber reinforced composites.展开更多
This paper presents an experimental study of the possibility of transition from multiple macro-cracking to multiple micro-cracking in cementitious composites. Conventional polyvinyl alcohol fiber reinforced cementitio...This paper presents an experimental study of the possibility of transition from multiple macro-cracking to multiple micro-cracking in cementitious composites. Conventional polyvinyl alcohol fiber reinforced cementitious composites normally exhibit macroscopic strain-hardening and multiple cracking after the first cracks appear. However, the individual crack width at the saturated stage is normally 60 to 80 μm. In the current study, the effect of fine aggregate size on the cracking performance, especially the individual crack width in the strain-hardening stage was studied by bending tests. The results show that the individual crack widths can be reduced from 60-80 μm to 10-30 μm by modifying the particle size of the fine aggregates used in the composites.展开更多
基金Committee on Science and Technology Foundation of China(No.50438010)The Research of Formation Progress and Control Technology of Concrete Structure Cracks
文摘Experiments were carried out to design polyvinyl alcohol （PVA） fiber reinforced cementitous composites （PVA-FRCCs） holding high ductility and energy consumption ability. Besides, the properties of each ingredients in composites, mixing method and technology for fresh mixture were described in detail. Then, the pseudo-strain-hardening （PSH） behavior was investigated in uniaxial tension test. As a result, the maximum ultimate tensile strain can reach 0.7 percent. On the other hand, the single edge notch （SEN） thin sheet specimens were employed to gain the normal tensile load via crack mouth opening displacement （CMOD） curves, which can show obvious PSH behavior. In addition, the curves can be divided into four zones whose fracture toughness calculation methods were discussed. The wedge splitting （WS） test method can be applied to discuss the fracture toughness. Moreover, fracture energy of SEN and WS specimens were both approximately evaluated.
文摘In this paper, we deals with mechanical performance of resin impregnation with natural fiber and fiber reinforced composites. The effect of the addition of a rein impregnation process on static strength of the injection molded composites was investigated by carrying out tensile and banding tests, followed by Scanning electron microscopy (SEM) observation of fiber surface and fracture surface of composites. The tensile strength of natural fiber and natural fiber reinforced composites with resin impregnation method increases with Polyvinyl alcohol (PVA) impregnation. In addition, Phenol resin impregnation recovers fiber tensile strength after alkali treatment. Resin impregnation causes decrease in contact surface area;however, it does not cause decrease in mechanical properties. Our results suggest that the using rein impregnation method has better effect on the mechanical properties of natural fiber reinforced Polypropylene (PP) composites.
文摘Previously, Polyvinyl Alcohol (PVA) and phenolic resin were used for resin impregnated bamboo fiber reinforced PP composites which was manufactures for resin impregnated bamboo fiber with polypropylene (PP). Resin impregnation method can show improvement on tensile strength of fiber. However, to reduce the contact surface area and low inter-facial shear strength (IFSS) between impregnated resin and matrix, using 40% weight fraction of bamboo fiber in PP matrix, PVA impregnated composites with mean flexural and tensile strength 10% higher than untreated composites were produced butphenolic resin impregnated fiber reinforced composition’s mechanical properties were decreased. In this study maleic anhydride grafted polypropylene (MAPP) was used to increase interfacial shear strength between resin impregnated fiber and PP. With 10% MAPP, IFSS between resin impregnated fiber and PP increased more than 100% and reinforced composites. MAPP with untreated, phenolic resin and PVA impregnated cases showed similar mechanical properties. Yet in water absorption test, the PVA treatment with bamboo/PP composites increased water absorption ratio. But with 10% MAPP, matrix PP water absorption ratio decreased like phenolic resin impregnated fiber reinforced composites. 10% MAPP with resin impregnated bamboo fiber reinforced PP composites can improve IFSS, mechanical properties of composite and can decrease water absorption PVA resin impregnated bamboo fiber reinforced composites.
基金the National Natural Science Foundation of China (No. 50178043)
文摘This paper presents an experimental study of the possibility of transition from multiple macro-cracking to multiple micro-cracking in cementitious composites. Conventional polyvinyl alcohol fiber reinforced cementitious composites normally exhibit macroscopic strain-hardening and multiple cracking after the first cracks appear. However, the individual crack width at the saturated stage is normally 60 to 80 μm. In the current study, the effect of fine aggregate size on the cracking performance, especially the individual crack width in the strain-hardening stage was studied by bending tests. The results show that the individual crack widths can be reduced from 60-80 μm to 10-30 μm by modifying the particle size of the fine aggregates used in the composites.
