Al<sub>2</sub>O<sub>3</sub>/PVFM/Al<sub>2</sub>O<sub>3</sub> trilayer membranes are prepared by means of simple coating of PVA-Al<sub>2</sub>O<sub>3<...Al<sub>2</sub>O<sub>3</sub>/PVFM/Al<sub>2</sub>O<sub>3</sub> trilayer membranes are prepared by means of simple coating of PVA-Al<sub>2</sub>O<sub>3</sub> solution onto both sides of PVFM thin membranes, which is prepared via phase inversion method. The characteristics of the trilayer membranes and gel polymer electrolytes are investigated using FESEM, tensile testing apparatus, thermal shrinkage test, EIS and charge-discharge test. When inorganic Al<sub>2</sub>O<sub>3</sub> particles are used to coat the PVFM membrane, drawbacks associated with gel-type membranes, namely, poor mechanical strength and thermal stability are greatly improved. Lithium ion cell with the Al<sub>2</sub>O<sub>3</sub>/PVFM/Al<sub>2</sub>O<sub>3</sub> based GPE matched with LiFePO<sub>4</sub> shows excellent electrochemical performance.展开更多
A PVA-GAG-COL composite scaffold is fabricated by polyvinyl alcohol （PVA）, glyeosaminoglycan （GAG） and collagen （COL）. Laser surface modification technology is used to make holes on the surface of the scaffolds....A PVA-GAG-COL composite scaffold is fabricated by polyvinyl alcohol （PVA）, glyeosaminoglycan （GAG） and collagen （COL）. Laser surface modification technology is used to make holes on the surface of the scaffolds. Inside and outside interconnection micro-porous structure is obtained. Bioeompatibility test of the scaffolds shows that PVA-GAG-COL scaffold can promote the adhesion and proliferation of the fibroblast. Also, fibroblast can grow normally on the scaffolds with pore diameter from 115 um to 255 um and pore distance from 500 um to 2000 um. PVA-GAG-COL scaffolds possess excellent cell biocompatibility. The porous structure is suitable for cell culture in tissue engineering.展开更多
The application of phthalate plasticizers has been restricted around the world due to their poor migration and potential harm to the human body.Hence,producing functional bio-based plasticizers via exploiting clean an...The application of phthalate plasticizers has been restricted around the world due to their poor migration and potential harm to the human body.Hence,producing functional bio-based plasticizers via exploiting clean and reusable resources meets the satisfaction of current demands.In this study,flame-retardant rubber seed oil-based plasticize(FRP)was prepared via epoxidation reaction and ring opening addition reactions,which was used as a flame-resistant plasticizer for polyvinyl chloride to replace petroleum-based phthalate plasticizer.When DOP was replaced with FRP,the torque of PVC blends increased from 11.4 to 18.4 N⋅m,the LOI value increased from 24.3%for PVC-FRP-0%to 33.1%for PVC-FRP-20.The THR value diminished from 39 MJ/m^(2)(pertaining to PVC-FRC-0)to 22 MJ/m^(2)Tg increased from 23°C to 47°C,the weight loss of plasticized PVC blends significantly reduced from 22.6%to 2.8%in leaching tests.The study provided a new way to prepare flame retardant plasticizer using rubber seed oil as raw material.展开更多
A novel technology of preparation of felt-metal supported modified polyvinyl alcohol（PVA） ultrafiltration（UF） membrane was invented, which could avoid the blockage of the holes of support layer and the leakage of ...A novel technology of preparation of felt-metal supported modified polyvinyl alcohol（PVA） ultrafiltration（UF） membrane was invented, which could avoid the blockage of the holes of support layer and the leakage of the casting solution through the holes of support layer. Felt-metal supported ferric sulfate modified PVA composite UF membranes were prepared by the innovative technology. The results show that the composite membranes are used to treat 1 000 mg/L oil/water emulsion at trans-membrane pressure from 0.25 to 0.45 MPa, the permeate flux is from 36 to 52 L/（m2·h）, and the retention of chemical oxygen demand（COD） is over 92%. The composite membrane resistance increases with the increase of trans-naembrane pressure.展开更多
文摘Al<sub>2</sub>O<sub>3</sub>/PVFM/Al<sub>2</sub>O<sub>3</sub> trilayer membranes are prepared by means of simple coating of PVA-Al<sub>2</sub>O<sub>3</sub> solution onto both sides of PVFM thin membranes, which is prepared via phase inversion method. The characteristics of the trilayer membranes and gel polymer electrolytes are investigated using FESEM, tensile testing apparatus, thermal shrinkage test, EIS and charge-discharge test. When inorganic Al<sub>2</sub>O<sub>3</sub> particles are used to coat the PVFM membrane, drawbacks associated with gel-type membranes, namely, poor mechanical strength and thermal stability are greatly improved. Lithium ion cell with the Al<sub>2</sub>O<sub>3</sub>/PVFM/Al<sub>2</sub>O<sub>3</sub> based GPE matched with LiFePO<sub>4</sub> shows excellent electrochemical performance.
基金863 Program grant number: 2077AA09Z436+1 种基金Guangdong Province '211' Fund for Biomaterials and Tissue Engineering grantnumber: 50621030
文摘A PVA-GAG-COL composite scaffold is fabricated by polyvinyl alcohol （PVA）, glyeosaminoglycan （GAG） and collagen （COL）. Laser surface modification technology is used to make holes on the surface of the scaffolds. Inside and outside interconnection micro-porous structure is obtained. Bioeompatibility test of the scaffolds shows that PVA-GAG-COL scaffold can promote the adhesion and proliferation of the fibroblast. Also, fibroblast can grow normally on the scaffolds with pore diameter from 115 um to 255 um and pore distance from 500 um to 2000 um. PVA-GAG-COL scaffolds possess excellent cell biocompatibility. The porous structure is suitable for cell culture in tissue engineering.
基金funded by the Science and Technology Project of Henan Province(202102310593)and Science and Technology Project of Kaifeng City(2002003).
文摘The application of phthalate plasticizers has been restricted around the world due to their poor migration and potential harm to the human body.Hence,producing functional bio-based plasticizers via exploiting clean and reusable resources meets the satisfaction of current demands.In this study,flame-retardant rubber seed oil-based plasticize(FRP)was prepared via epoxidation reaction and ring opening addition reactions,which was used as a flame-resistant plasticizer for polyvinyl chloride to replace petroleum-based phthalate plasticizer.When DOP was replaced with FRP,the torque of PVC blends increased from 11.4 to 18.4 N⋅m,the LOI value increased from 24.3%for PVC-FRP-0%to 33.1%for PVC-FRP-20.The THR value diminished from 39 MJ/m^(2)(pertaining to PVC-FRC-0)to 22 MJ/m^(2)Tg increased from 23°C to 47°C,the weight loss of plasticized PVC blends significantly reduced from 22.6%to 2.8%in leaching tests.The study provided a new way to prepare flame retardant plasticizer using rubber seed oil as raw material.
文摘A novel technology of preparation of felt-metal supported modified polyvinyl alcohol（PVA） ultrafiltration（UF） membrane was invented, which could avoid the blockage of the holes of support layer and the leakage of the casting solution through the holes of support layer. Felt-metal supported ferric sulfate modified PVA composite UF membranes were prepared by the innovative technology. The results show that the composite membranes are used to treat 1 000 mg/L oil/water emulsion at trans-membrane pressure from 0.25 to 0.45 MPa, the permeate flux is from 36 to 52 L/（m2·h）, and the retention of chemical oxygen demand（COD） is over 92%. The composite membrane resistance increases with the increase of trans-naembrane pressure.
