There are three formation stages of Silurian hydrocarbon pools in the Tarim Basin. The widely distributed asphaltic sandstones in the Tazhong （central Tarim） and Tabei （northern Tarim） areas are the results of des...There are three formation stages of Silurian hydrocarbon pools in the Tarim Basin. The widely distributed asphaltic sandstones in the Tazhong （central Tarim） and Tabei （northern Tarim） areas are the results of destruction of hydrocarbon pools formed in the first-stage, and the asphaltic sandstones around the Awati Sag were formed in the second-stage. The hydrocarbon migration characteristics reflected by the residual dry asphalts could represent the migration characteristics of hydrocarbons in the Silurian paleo-pools, while the present movable oil in the Silurian reservoirs is related to the iater-stage （the third-stage） hydrocarbon accumulation.展开更多
Pooling,unpooling/specialization,and discretionary task completion are typical operational strategies in queueing systems that arise in healthcare,call centers,and online sales.These strategies may have advantages and...Pooling,unpooling/specialization,and discretionary task completion are typical operational strategies in queueing systems that arise in healthcare,call centers,and online sales.These strategies may have advantages and disadvantages in different operational environments.This paper uses the M/M/1 and M/M/2 queues to study the impact of pooling,specialization,and discretionary task completion on the average queue length.Closed-form solutions for the average M/M/2 queue length are derived.Computational examples illustrate how the average queue length changes with the strength of pooling,specialization,and discretionary task completion.Finally,several conjectures are made in the paper.展开更多
The state of in situ stress is a crucial parameter in subsurface engineering,especially for critical projects like nuclear waste repository.As one of the two ISRM suggested methods,the overcoring(OC)method is widely u...The state of in situ stress is a crucial parameter in subsurface engineering,especially for critical projects like nuclear waste repository.As one of the two ISRM suggested methods,the overcoring(OC)method is widely used to estimate the full stress tensors in rocks by independent regression analysis of the data from each OC test.However,such customary independent analysis of individual OC tests,known as no pooling,is liable to yield unreliable test-specific stress estimates due to various uncertainty sources involved in the OC method.To address this problem,a practical and no-cost solution is considered by incorporating into OC data analysis additional information implied within adjacent OC tests,which are usually available in OC measurement campaigns.Hence,this paper presents a Bayesian partial pooling(hierarchical)model for combined analysis of adjacent OC tests.We performed five case studies using OC test data made at a nuclear waste repository research site of Sweden.The results demonstrate that partial pooling of adjacent OC tests indeed allows borrowing of information across adjacent tests,and yields improved stress tensor estimates with reduced uncertainties simultaneously for all individual tests than they are independently analysed as no pooling,particularly for those unreliable no pooling stress estimates.A further model comparison shows that the partial pooling model also gives better predictive performance,and thus confirms that the information borrowed across adjacent OC tests is relevant and effective.展开更多
In convolutional neural networks,pooling methods are used to reduce both the size of the data and the number of parameters after the convolution of the models.These methods reduce the computational amount of convoluti...In convolutional neural networks,pooling methods are used to reduce both the size of the data and the number of parameters after the convolution of the models.These methods reduce the computational amount of convolutional neural networks,making the neural network more efficient.Maximum pooling,average pooling,and minimum pooling methods are generally used in convolutional neural networks.However,these pooling methods are not suitable for all datasets used in neural network applications.In this study,a new pooling approach to the literature is proposed to increase the efficiency and success rates of convolutional neural networks.This method,which we call MAM(Maximum Average Minimum)pooling,is more interactive than other traditional maximum pooling,average pooling,and minimum pooling methods and reduces data loss by calculating the more appropriate pixel value.The proposed MAM pooling method increases the performance of the neural network by calculating the optimal value during the training of convolutional neural networks.To determine the success accuracy of the proposed MAM pooling method and compare it with other traditional pooling methods,training was carried out on the LeNet-5 model using CIFAR-10,CIFAR-100,and MNIST datasets.According to the results obtained,the proposed MAM pooling method performed better than the maximum pooling,average pooling,and minimum pooling methods in all pool sizes on three different datasets.展开更多
We examine Africa's vaccine manufacturing potential,spurred by the coronavirus disease 2019(COVID-19)pan-demic,while critically analyzing vaccine price inequities and procurement strategies during the pandemic,wit...We examine Africa's vaccine manufacturing potential,spurred by the coronavirus disease 2019(COVID-19)pan-demic,while critically analyzing vaccine price inequities and procurement strategies during the pandemic,with anticipation of future outbreaks.Although Africa consumes approximately 25%of the global vaccine supply,over 99%of these vaccines are produced outside the continent,primarily due to insufficient local investment.Vaccine procurement strategies have relied heavily on pooled procurement mechanisms and tiered-pricing mod-els,predominantly controlled by external organizations.Significant disparities in vaccine pricing have resulted in vaccine price inequities,with evidence suggesting price discrimination,where different prices are charged for the same vaccine across countries and regions.While vaccine prices are only one component of vaccination cam-paign costs,the inequitable pricing of vaccines poses serious challenges to fair access,especially in low-income countries.Given the inevitability of future pandemics and other outbreaks,the central question remains:Does Africa possess the capacity to strengthen its vaccine production infrastructure and reduce dependency on ex-ternal suppliers?Our review reveals that,with robust political commitment,enhanced investment in Research and Development,and leveraging the heterogeneous nature of the regional bloc,Africa has made strides toward establishing vaccine manufacturing hubs with the potential for substantial capacity expansion.Furthermore,we argue for a regional campaign based on the principles of the fair priority model as an ethical framework for vaccine procurement,which prioritizes need and ensures equitable distribution,thereby complementing existing pooled procurement arrangements in times of future pandemics.This paper concludes with two key recommen-dations based on lessons learned from the COvID-19 crisis and future preparedness.First,Africa must push for a transparent and equitable tiered-pricing structure to ensure affordability for all Second,intentional and sustained investment in R&D is critical to addressing systemic inequities in vaccine supply,not only for cOVID-19 but for future outbreaks and routine immunization programs.展开更多
High heat dissipation is required for miniaturization and increasing the power of electronic systems.Pool boiling is a promising option for achieving efficient heat dissipation at low wall superheat without the need f...High heat dissipation is required for miniaturization and increasing the power of electronic systems.Pool boiling is a promising option for achieving efficient heat dissipation at low wall superheat without the need for moving parts.Many studies have focused on improving heat transfer efficiency during boiling by modifying the surface of the heating element.This paper presents an experimental investigation on improving pool boiling heat transfer using an open microchannel.The primary goal of this work is to investigate the impact of the channel geometry characteristics on boiling heat transfer.Initially,rectangular microchannels were prepared on a circular copper test piece with a diameter of 20 mm.Then,the boiling characteristics of these microchannels were compared with those of a smooth surface under saturated conditions using deionized water.In this investigation,a wire-cutting electrical discharge machine(EDM)machine was used to produce parallel microchannels with channel widths of 0.2,0.4,and 0.8 mm.The fin thicknesses were 0.2,0.4,and 0.6 mm,while the channel depth remained constant at 0.4 mm.The results manifested that the surface featuring narrower fins and broader channels achieved superior performance.The heat transfer coefficient(HTC)was enhanced by a maximum of 248%,and the critical heat flux(CHF)was enhanced by a maximum of 101%compared to a plain surface.Eventually,the obtained results were compared with previous research and elucidated a good agreement.展开更多
Liver transplantation(LT)provides a life-saving option for cirrhotic patients with complications and hepatocellular carcinoma.Despite the increasing number of liver transplants performed each year,the number of LT can...Liver transplantation(LT)provides a life-saving option for cirrhotic patients with complications and hepatocellular carcinoma.Despite the increasing number of liver transplants performed each year,the number of LT candidates on the waitlist remains unchanged due to an imbalance between donor organ supply and the demand which increases the waitlist time and mortality.Living donor liver transplant had a great role in increasing the donor pool and shortened waitlist time for LT candidates.Nevertheless,further strategies can be implemented to increase the pool of potential donors in deceased donor LT,such as reducing the rate of organ discards.Utilizing hepatitis C virus(HCV)seropositive liver grafts is one of the expanded donor organ criteria.A yearly increase of hundreds of transplants is anticipated as a result of maximizing the utilization of HCV-positive organs for HCV-negative recipients.Direct-acting antiviral therapy's efficacy has revolutionized the treatment of HCV infection and the use of HCV-seropositive donors in transplantation.The American Society of Transplantation advises against performing transplants from HCV-infected liver donors(D+)into HCV-negative recipient(R-)unless under Institutional Review Board-approved study rules and with full informed consent of the knowledge gaps associated with such transplants.Proper selection of patients to be transplanted with HCV-infected grafts and confirming their access to direct-acting antivirals if needed is im-portant.National and international consensuses are needed to regulate this process to ensure the maximum benefit and the least adverse events.展开更多
In order to enhance the performance of the CNN-based segmentation models for bone metastases, this study proposes a segmentation method that integrates dual-pooling, DAC, and RMP modules. The network consists of disti...In order to enhance the performance of the CNN-based segmentation models for bone metastases, this study proposes a segmentation method that integrates dual-pooling, DAC, and RMP modules. The network consists of distinct feature encoding and decoding stages, with dual-pooling modules employed in encoding stages to maintain the background information needed for bone scintigrams diagnosis. Both the DAC and RMP modules are utilized in the bottleneck layer to address the multi-scale problem of metastatic lesions. Experimental evaluations on 306 clinical SPECT data have demonstrated that the proposed method showcases a substantial improvement in both DSC and Recall scores by 3.28% and 6.55% compared the baseline. Exhaustive case studies illustrate the superiority of the methodology.展开更多
In order to obtain good welding quality, it is necessary to apply quality control because there are many influencing factors in laser welding process. The key to realize welding quality control is to obtain the qualit...In order to obtain good welding quality, it is necessary to apply quality control because there are many influencing factors in laser welding process. The key to realize welding quality control is to obtain the quality information. Abundant weld quality information is contained in weld pool and keyhole. Aiming at Nd：YAG laser welding of stainless steel, a coaxial visual sensing system was constructed. The images of weld pool and keyhole were obtained. Based on the gray character of weld pool and keyhole in images, an image processing algorithm was designed. The search start point and search criteria of weld pool and keyhole edge were determined respectively.展开更多
[Objective] To clarify the effects of different straw retention regimes on soil fertility in double cropping paddy field. [Method] The effects of different straw reten- tion regimes on total organic carbon （CToc）, a...[Objective] To clarify the effects of different straw retention regimes on soil fertility in double cropping paddy field. [Method] The effects of different straw reten- tion regimes on total organic carbon （CToc）, active carbon （CA） and mineralized carbon （CM） were analyzed, and carbon pool active （A）, carbon pool active index （A/）, carbon pool index （CPI） and carbon pool management index （CPMi） for each treat- ment were calculated. [Result] Compared with the unfertilized treatment （CK）, CToc, CA, CM and the available ratio of soil carbon were increased in the treatment of re- turning early season and late season rice straws to field. With the same nutrient application, CToc, CA and the available ratio of soil carbon in the field with straw re- turned to field were higher than that of straw incineration and no straw returning, and the change in soil CA content was more significant. The difference in CPMI be- tween different treatments reached significant or very significant level, and the value was in the order of straw directly returned to field 〉 straw returned to field after in- cineration 〉 no straw returned to field. [Conclusion] This study provided theoretical bases for the increase of soil CA content and soil fertility in double rice fields.展开更多
The organic carbon contents,carbon density and carbon storage of the soil in the Pinus koraiensis plantation ecosystem were investigated in Maoershan experimental forest farm,Shangzhi County,Heilongjiang,on the west s...The organic carbon contents,carbon density and carbon storage of the soil in the Pinus koraiensis plantation ecosystem were investigated in Maoershan experimental forest farm,Shangzhi County,Heilongjiang,on the west slope of the Zhangguangcai Mountains in northeastern China for providing data to evaluation of the carbon balance in forest ecosystem of northeastern China.These soil carbon indicators were measured in three forest types,pure P.koraiensis plantation,P.koraiensis and Betula platyphylla mixed forest,and the P.koraiensis and Quercus mongolica mixed forest.The soil carbon pool consisted of four compartments,namely L layer,F layer,H layer and B layer.With variance analysis,we found that both organic carbon content and carbon density of the soil were significantly affected by forest types,soil compartments and slope positions.The highest soil carbon density（278.63 Mg·ha^-1）.was observed in the mixed forest of P.koraiensis and Q.mongolica.The B layer had the highest carbon density（212.28 Mg·ha^-1） among all the soil compartments.In terms of slope position,the highest soil carbon density（394.18 Mg·ha^-1） presented in the low slope.Besides,soil carbon content and carbon density had a marked change with the organic matter content and vertical depth of the soil in each compartment.The results of this study implied that in the temperate humid region,the mixed ecosystem of regional Pinus koraiensis plantations and natural forest had relatively high carbon storage capability.展开更多
Two types of tube bundles are designed,which are,respectively,composed of six tubes arranged in the boiling chamber.The nucleate pool boiling performance of smooth tube bundles and sintered porous surface tube bundles...Two types of tube bundles are designed,which are,respectively,composed of six tubes arranged in the boiling chamber.The nucleate pool boiling performance of smooth tube bundles and sintered porous surface tube bundles with deionized water as a medium are experimentally studied at atmospheric and sub-atmospheric pressures,respectively.The experimental results indicate that the boiling heat transfer coefficients of the two types of tube bundles increase with the increase in pressure under vacuum conditions as they behave under ordinary pressure.As the pressure varies from 10 to 100 kPa,it also can be seen that the heat transfer coefficient of the sintered porous surface tube is increased by 0.2 to 4 times compared with the smooth one under the same operating parameters.In addition,the experimental data show that a definite bundle effect exists in both sintered porous surface tubes and smooth tubes under vacuum conditions.展开更多
文摘There are three formation stages of Silurian hydrocarbon pools in the Tarim Basin. The widely distributed asphaltic sandstones in the Tazhong （central Tarim） and Tabei （northern Tarim） areas are the results of destruction of hydrocarbon pools formed in the first-stage, and the asphaltic sandstones around the Awati Sag were formed in the second-stage. The hydrocarbon migration characteristics reflected by the residual dry asphalts could represent the migration characteristics of hydrocarbons in the Silurian paleo-pools, while the present movable oil in the Silurian reservoirs is related to the iater-stage （the third-stage） hydrocarbon accumulation.
文摘Pooling,unpooling/specialization,and discretionary task completion are typical operational strategies in queueing systems that arise in healthcare,call centers,and online sales.These strategies may have advantages and disadvantages in different operational environments.This paper uses the M/M/1 and M/M/2 queues to study the impact of pooling,specialization,and discretionary task completion on the average queue length.Closed-form solutions for the average M/M/2 queue length are derived.Computational examples illustrate how the average queue length changes with the strength of pooling,specialization,and discretionary task completion.Finally,several conjectures are made in the paper.
基金supported by the Guangdong Basic and Applied Basic Research Foundation(2023A1515011244).
文摘The state of in situ stress is a crucial parameter in subsurface engineering,especially for critical projects like nuclear waste repository.As one of the two ISRM suggested methods,the overcoring(OC)method is widely used to estimate the full stress tensors in rocks by independent regression analysis of the data from each OC test.However,such customary independent analysis of individual OC tests,known as no pooling,is liable to yield unreliable test-specific stress estimates due to various uncertainty sources involved in the OC method.To address this problem,a practical and no-cost solution is considered by incorporating into OC data analysis additional information implied within adjacent OC tests,which are usually available in OC measurement campaigns.Hence,this paper presents a Bayesian partial pooling(hierarchical)model for combined analysis of adjacent OC tests.We performed five case studies using OC test data made at a nuclear waste repository research site of Sweden.The results demonstrate that partial pooling of adjacent OC tests indeed allows borrowing of information across adjacent tests,and yields improved stress tensor estimates with reduced uncertainties simultaneously for all individual tests than they are independently analysed as no pooling,particularly for those unreliable no pooling stress estimates.A further model comparison shows that the partial pooling model also gives better predictive performance,and thus confirms that the information borrowed across adjacent OC tests is relevant and effective.
文摘In convolutional neural networks,pooling methods are used to reduce both the size of the data and the number of parameters after the convolution of the models.These methods reduce the computational amount of convolutional neural networks,making the neural network more efficient.Maximum pooling,average pooling,and minimum pooling methods are generally used in convolutional neural networks.However,these pooling methods are not suitable for all datasets used in neural network applications.In this study,a new pooling approach to the literature is proposed to increase the efficiency and success rates of convolutional neural networks.This method,which we call MAM(Maximum Average Minimum)pooling,is more interactive than other traditional maximum pooling,average pooling,and minimum pooling methods and reduces data loss by calculating the more appropriate pixel value.The proposed MAM pooling method increases the performance of the neural network by calculating the optimal value during the training of convolutional neural networks.To determine the success accuracy of the proposed MAM pooling method and compare it with other traditional pooling methods,training was carried out on the LeNet-5 model using CIFAR-10,CIFAR-100,and MNIST datasets.According to the results obtained,the proposed MAM pooling method performed better than the maximum pooling,average pooling,and minimum pooling methods in all pool sizes on three different datasets.
文摘We examine Africa's vaccine manufacturing potential,spurred by the coronavirus disease 2019(COVID-19)pan-demic,while critically analyzing vaccine price inequities and procurement strategies during the pandemic,with anticipation of future outbreaks.Although Africa consumes approximately 25%of the global vaccine supply,over 99%of these vaccines are produced outside the continent,primarily due to insufficient local investment.Vaccine procurement strategies have relied heavily on pooled procurement mechanisms and tiered-pricing mod-els,predominantly controlled by external organizations.Significant disparities in vaccine pricing have resulted in vaccine price inequities,with evidence suggesting price discrimination,where different prices are charged for the same vaccine across countries and regions.While vaccine prices are only one component of vaccination cam-paign costs,the inequitable pricing of vaccines poses serious challenges to fair access,especially in low-income countries.Given the inevitability of future pandemics and other outbreaks,the central question remains:Does Africa possess the capacity to strengthen its vaccine production infrastructure and reduce dependency on ex-ternal suppliers?Our review reveals that,with robust political commitment,enhanced investment in Research and Development,and leveraging the heterogeneous nature of the regional bloc,Africa has made strides toward establishing vaccine manufacturing hubs with the potential for substantial capacity expansion.Furthermore,we argue for a regional campaign based on the principles of the fair priority model as an ethical framework for vaccine procurement,which prioritizes need and ensures equitable distribution,thereby complementing existing pooled procurement arrangements in times of future pandemics.This paper concludes with two key recommen-dations based on lessons learned from the COvID-19 crisis and future preparedness.First,Africa must push for a transparent and equitable tiered-pricing structure to ensure affordability for all Second,intentional and sustained investment in R&D is critical to addressing systemic inequities in vaccine supply,not only for cOVID-19 but for future outbreaks and routine immunization programs.
文摘High heat dissipation is required for miniaturization and increasing the power of electronic systems.Pool boiling is a promising option for achieving efficient heat dissipation at low wall superheat without the need for moving parts.Many studies have focused on improving heat transfer efficiency during boiling by modifying the surface of the heating element.This paper presents an experimental investigation on improving pool boiling heat transfer using an open microchannel.The primary goal of this work is to investigate the impact of the channel geometry characteristics on boiling heat transfer.Initially,rectangular microchannels were prepared on a circular copper test piece with a diameter of 20 mm.Then,the boiling characteristics of these microchannels were compared with those of a smooth surface under saturated conditions using deionized water.In this investigation,a wire-cutting electrical discharge machine(EDM)machine was used to produce parallel microchannels with channel widths of 0.2,0.4,and 0.8 mm.The fin thicknesses were 0.2,0.4,and 0.6 mm,while the channel depth remained constant at 0.4 mm.The results manifested that the surface featuring narrower fins and broader channels achieved superior performance.The heat transfer coefficient(HTC)was enhanced by a maximum of 248%,and the critical heat flux(CHF)was enhanced by a maximum of 101%compared to a plain surface.Eventually,the obtained results were compared with previous research and elucidated a good agreement.
文摘Liver transplantation(LT)provides a life-saving option for cirrhotic patients with complications and hepatocellular carcinoma.Despite the increasing number of liver transplants performed each year,the number of LT candidates on the waitlist remains unchanged due to an imbalance between donor organ supply and the demand which increases the waitlist time and mortality.Living donor liver transplant had a great role in increasing the donor pool and shortened waitlist time for LT candidates.Nevertheless,further strategies can be implemented to increase the pool of potential donors in deceased donor LT,such as reducing the rate of organ discards.Utilizing hepatitis C virus(HCV)seropositive liver grafts is one of the expanded donor organ criteria.A yearly increase of hundreds of transplants is anticipated as a result of maximizing the utilization of HCV-positive organs for HCV-negative recipients.Direct-acting antiviral therapy's efficacy has revolutionized the treatment of HCV infection and the use of HCV-seropositive donors in transplantation.The American Society of Transplantation advises against performing transplants from HCV-infected liver donors(D+)into HCV-negative recipient(R-)unless under Institutional Review Board-approved study rules and with full informed consent of the knowledge gaps associated with such transplants.Proper selection of patients to be transplanted with HCV-infected grafts and confirming their access to direct-acting antivirals if needed is im-portant.National and international consensuses are needed to regulate this process to ensure the maximum benefit and the least adverse events.
文摘In order to enhance the performance of the CNN-based segmentation models for bone metastases, this study proposes a segmentation method that integrates dual-pooling, DAC, and RMP modules. The network consists of distinct feature encoding and decoding stages, with dual-pooling modules employed in encoding stages to maintain the background information needed for bone scintigrams diagnosis. Both the DAC and RMP modules are utilized in the bottleneck layer to address the multi-scale problem of metastatic lesions. Experimental evaluations on 306 clinical SPECT data have demonstrated that the proposed method showcases a substantial improvement in both DSC and Recall scores by 3.28% and 6.55% compared the baseline. Exhaustive case studies illustrate the superiority of the methodology.
基金Project (10776020) supported by the Joint Foundation of the National Natural Science Foundation of China and China Academy of Engineering Physics
文摘In order to obtain good welding quality, it is necessary to apply quality control because there are many influencing factors in laser welding process. The key to realize welding quality control is to obtain the quality information. Abundant weld quality information is contained in weld pool and keyhole. Aiming at Nd：YAG laser welding of stainless steel, a coaxial visual sensing system was constructed. The images of weld pool and keyhole were obtained. Based on the gray character of weld pool and keyhole in images, an image processing algorithm was designed. The search start point and search criteria of weld pool and keyhole edge were determined respectively.
基金Supported by the National Key Technology R&D Program during the Eleventh Five-year Plan Period,China(2006BAD02A04)the Key Technology R&D Program of Jiangxi Province,China(2009BNA03800)~~
文摘[Objective] To clarify the effects of different straw retention regimes on soil fertility in double cropping paddy field. [Method] The effects of different straw reten- tion regimes on total organic carbon （CToc）, active carbon （CA） and mineralized carbon （CM） were analyzed, and carbon pool active （A）, carbon pool active index （A/）, carbon pool index （CPI） and carbon pool management index （CPMi） for each treat- ment were calculated. [Result] Compared with the unfertilized treatment （CK）, CToc, CA, CM and the available ratio of soil carbon were increased in the treatment of re- turning early season and late season rice straws to field. With the same nutrient application, CToc, CA and the available ratio of soil carbon in the field with straw re- turned to field were higher than that of straw incineration and no straw returning, and the change in soil CA content was more significant. The difference in CPMI be- tween different treatments reached significant or very significant level, and the value was in the order of straw directly returned to field 〉 straw returned to field after in- cineration 〉 no straw returned to field. [Conclusion] This study provided theoretical bases for the increase of soil CA content and soil fertility in double rice fields.
基金supported by National Technology Support Project (2008BAD95B10-6)
文摘The organic carbon contents,carbon density and carbon storage of the soil in the Pinus koraiensis plantation ecosystem were investigated in Maoershan experimental forest farm,Shangzhi County,Heilongjiang,on the west slope of the Zhangguangcai Mountains in northeastern China for providing data to evaluation of the carbon balance in forest ecosystem of northeastern China.These soil carbon indicators were measured in three forest types,pure P.koraiensis plantation,P.koraiensis and Betula platyphylla mixed forest,and the P.koraiensis and Quercus mongolica mixed forest.The soil carbon pool consisted of four compartments,namely L layer,F layer,H layer and B layer.With variance analysis,we found that both organic carbon content and carbon density of the soil were significantly affected by forest types,soil compartments and slope positions.The highest soil carbon density（278.63 Mg·ha^-1）.was observed in the mixed forest of P.koraiensis and Q.mongolica.The B layer had the highest carbon density（212.28 Mg·ha^-1） among all the soil compartments.In terms of slope position,the highest soil carbon density（394.18 Mg·ha^-1） presented in the low slope.Besides,soil carbon content and carbon density had a marked change with the organic matter content and vertical depth of the soil in each compartment.The results of this study implied that in the temperate humid region,the mixed ecosystem of regional Pinus koraiensis plantations and natural forest had relatively high carbon storage capability.
基金The National Natural Science Foundation of China(No.50706012)
文摘Two types of tube bundles are designed,which are,respectively,composed of six tubes arranged in the boiling chamber.The nucleate pool boiling performance of smooth tube bundles and sintered porous surface tube bundles with deionized water as a medium are experimentally studied at atmospheric and sub-atmospheric pressures,respectively.The experimental results indicate that the boiling heat transfer coefficients of the two types of tube bundles increase with the increase in pressure under vacuum conditions as they behave under ordinary pressure.As the pressure varies from 10 to 100 kPa,it also can be seen that the heat transfer coefficient of the sintered porous surface tube is increased by 0.2 to 4 times compared with the smooth one under the same operating parameters.In addition,the experimental data show that a definite bundle effect exists in both sintered porous surface tubes and smooth tubes under vacuum conditions.
