Importance of oxygen-containing functionalities and pore structures of biochar in catalyzing pyrolysis of homologous poplar

Biochar and bio-oil are produced simultaneously in one pyrolysis process,and they inevitably contact and may interact,influencing the composition of bio-oil and modifying the structure of biochar.In this sense,biochar is an inherent catalyst for pyrolysis.In this study,in order to investigate the influence of functionalities and pore structures of biochar on its capability for catalyzing the conversion of homologous volatiles in bio-oil,three char catalysts(600C,800C,and 800AC)produced via pyrolysis of poplar wood at 600 or 800℃or activated at 800℃,were used for catalyzing pyrolysis of homologous poplar wood at 600℃,respectively.The results indicated that the 600C catalyst was more active than 800C and 800AC for catalyzing cracking of volatiles to form more gas(yield increase by 40.2%)and aromatization of volatiles to form more light or heavy phenolics,due to its abundant oxygen-containing functionalities acting as active sites.The developed pores of the 800AC showed no such catalytic effect but could trap some volatiles and allow their further conversion via sufficient aromatization.Nevertheless,the interaction with the volatiles consumed oxygen on 600C(decrease by 50%),enhancing the aromatic degree and increasing thermal stability.The dominance of deposition of carbonaceous material of a very aromatic nature over 800C and 800AC resulted in net weight gain and blocked micropores but formed additional macropores.The in situ diffuse reflectance infrared Fourier transform spectroscopy characterization of the catalytic pyrolysis indicated superior activity of 600C for removal of -OH,while conversion of the intermediates bearing C=O was enhanced over all the char catalysts.

Identification and Control of Several Leaf Diseases of Poplar

This paper introduces the identification characteristics,occurrence regularity and control methods of several leaf diseases of poplar,including poplar angular leaf spot,poplar large spot,poplar leaf blight and poplar rust,in order to provide the basis for the healthy growth of poplar and the technical support for the sustainable development of forestry industry.

Factors affecting poplar wetwood characteristics

Wet wood is an abnormal phenomenon in growing trees,which adversely affects growth,subsequent wood processing and economic values of wood products.In this study,the influences of factors such as clones,afforestation methods,site conditions and climate conditions on the characteristics of poplar wetwood were studied through field investigations in 27 clones from 48 sample plots in 28 counties.Results showed that the incidences of wetwood were almost 100%in all plots.Ratios of wetwood area among the48 plots differed from 15.1 to 90.2%.Wetwood area ratios,moisture contents and pH differed significantly between the 27 clones.Wetwood area ratios of the clones ranged from18.7 to 62.3%.Ratios of wetwood areas were positively correlated with wet wood moisture content and pH,tree age,and negatively correlated with pH of sap wood.The repeatability of wet wood area ratios was 0.52,moderately controlled by genetics.Wetwood moisture content and pH were highly controlled by genetics,indicated by the repeatability of 0.91 and 0.89,respectively.There were significant differences in wetwood area ratios,moisture content and pH between different site conditions,afforestation methods,and geographical regions.Sloping land had the lowest wetwood area ratios and moisture content among four types of sites.Afforestation by direct seeding and rooted cuttings had the lowest wetwood area ratios and moisture content,respectively.In the three geographical regions,the Yellow River Basin had the lowest wetwood values of all three factors.

Tree ecophysiology in the context of climate change

Forest structure and function strongly depend on and concurrently influence environmental conditions.Tree performance is generally governed by its genetics and environment;thus,recent hotspots in this field include tree genotype×environment,phenotype×environment,and functional trait×environment interactions.The editorial,review,and 22 original research articles in this Special Issue,"Tree ecophysiology in the context of climate change",highlight ecophysiological phenomena(e.g.,climate hormesis,seed germination,tree mortality),processes(e.g.,tree metabolism,photosynthate allocation,nutrient uptake and transport),indicators(e.g.,carbon sequestration,pollutants),measurements(e.g.,thermal time methods,soil quality indices,vegetation spectral index,and near-infrared leaf reflectance),and modeling(e.g.,climate correlations with tree growth,photo synthetic phenology,hydraulic strategies,OliveCan model)in the context of global climate change.Understanding forest-environment interactions from an ecophysiological perspective as climate changes provides insights into species fitness in suboptimal environments,species competition for limited resources,and phylogenetic divergence or convergence of species,and predicting species distributions.

PtrDJ1C,an atypical member of the DJ-1 superfamily,is essential for early chloroplast development and lignin deposition in poplar

The nuclear-encoded factors and the photosynthetic apparatus have been studied extensively during chloroplast biogenesis.However,many questions regarding these processes remain unanswered,particularly in perennial woody plants.As a model material of woody plants,poplar not only has very significant value of research,but also possesses economic and ecological properties.This study reports the Populus trichocarpa DJ-1C(PtrDJ1C)factor,encoded by a nuclear gene,and a member of the DJ-1 superfamily.PtrDJ1C knock-out with the CRISPR/Cas9 system resulted in different albino phenotypes.Chlorophyll fluorescence and immunoblot analyses showed that the levels of photosynthetic complex proteins decreased significantly.Moreover,the transcript level of plastid-encoded RNA polymerase-dependent genes and the splicing efficiency of several introns were affected in the mutant line.Furthermore,rRNA accumulation was abnormal,leading to developmental defects in chloroplasts and affecting lignin accumulation.We concluded that the PtrDJ1C protein is essential for early chloroplast development and lignin deposition in poplar.

Selecting the Technology of Sodium Silicate Modified Poplar with the Highest Performance by Fuzzy Orthogonal Method

Sodium silicate modification can improve the overall performance of wood.The modification process has a great influence on the properties of modified wood.In this study,a new method was introduced to analyze the wood modification process,and the properties of modified wood were studied.Poplar wood was modified with sodium silicate by vacuum-pressure impregnation.After screening using single-factor experiments,an orthogonal experiment was carried out with solution concentration,impregnation time,impregnation pressure,and the cycle times as experimental factors.The modified poplar with the best properties was selected by fuzzy mathematics and characterized by SEM,FT-IR,XRD and TG.The results showed that some lignin and hemicellulose were removed from the wood due to the alkaline action of sodium silicate,and the orderly crystal area of poplar became disorderly,resulting in the reduction of crystallinity of the modified poplar wood.FT-IR analysis showed that sodium silicate was hydrolyzed to form polysilicic acid in wood,and structural analysis revealed the formation of Si-O-Si and Si-O-C,indicating that sodium silicate reacted with fibers on the wood cell wall.TG-DTG curves showed that the final residual mass of modified poplar wood increased from 25%to 67%,and the temperature of the maximum loss rate decreased from 343℃ to 276℃.The heat release and smoke release of modified poplar wood decreased obviously.This kind of material with high strength and fire resistance can be used in the outdoor building and indoor furniture.

Function identification of miR159a,a positive regulator during poplar resistance to drought stress

Drought seriously affects the growth and development of plants.MiR159 is a highly conserved and abundant microRNA family that plays a crucial role in plant growth and stress responses.However,studies of its function in woody plants are still lacking.Here,the expression of miR159a was significantly upregulated after drought treatment in poplar,and the overexpression of miR159a(OX159a)significantly reduced the open area of the stomata and improved water-use efficiency in poplar.After drought treatment,OX159a lines had better scavenging ability of reactive oxygen species and damage of the membrane system was less than that in wild-type lines.MYB was the target gene of miR159a,as verified by psRNATarget prediction,RT-qPCR,degradome sequencing,and 5′rapid amplification of cDNA ends(5′RACE).Additionally,miR159a-short tandem target mimic suppression(STTM)poplar lines showed increased sensitivity to drought stress.Transcriptomic analysis comparing OX159a lines with wild-type lines revealed upregulation of a series of genes related to response to water deprivation and metabolite synthesis.Moreover,drought-responsive miR172d and miR398 were significantly upregulated and downregulated respectively in OX159a lines.This investigation demonstrated that miR159a played a key role in the tolerance of poplar to drought by reducing stomata open area,increasing the number and total area of xylem vessels,and enhancing water-use efficiency,and provided new insights into the role of plant miR159a and crucial candidate genes for the molecular breeding of trees with tolerance to drought stress.

Experimental Study of Mode-I and Mode-II Interlaminar Fracture Characteristics of Poplar LVL

Fracture is a common failure form of poplar laminated veneer lumber(LVL).In the present work,we performed an experimental study on the mode-I along-grain interlaminar fracture,mode-I cross-grain interlaminar fracture,and mode-II interlaminar fracture of poplar LVL.We investigated stress mechanisms,failure modes,and fracture toughness values of the different fracture types.The experimental results revealed that the crack in the mode-I along-grain interlaminar fracture specimen propagated along the prefabricated crack direction,and the crack tip broke.The mode-I cross-grain interlaminar fracture specimen had cracks in the vertical direction near the prefabricated crack.In the mode-II interlaminar fracture specimen,cracks appeared along the initial prefabricated crack direction.The load–displacement curves of these three specimens were linear in the early stage of loading.With the increase in the load,a nonlinear segment appeared before crack propagation and a descending segment appeared after crack propagation.The nonlinear segments of the mode-I along-grain interlaminar fracture and mode-II interlaminar fracture were very short,and cracks expanded quickly after their initiation,resulting in brit-tle fracture.The nonlinear segment of the mode-I cross-grain interlaminar fracture was long,resulting in plastic failure.The average toughness values of the mode-I along-grain interlaminar fracture,mode-I cross-grain inter-laminar fracture,and mode-II interlaminar fracture were 15.43,270.15,and 39.72 MPa·mm^(1/2),respectively.

Evaluation of Water Transfer Capacity of Poplar with Pectinase Treated under the Solar Interface Evaporation

Poplar wood,which was used as the absorption material for the solar-driven interfacial evaporation,was treated for 3 days,6 days and 9 days with the pectinase,and then was simulated for photothermal evaporation test at one standard solar radiation intensity(1 kW⋅m^(−2)).The effects of pectinase treatment on cell passage and water migration capacity of poplars were analyzed by the mercury intrusion porosimetry,the scanning electron microscope and fractal theory.It was found that the pit membrane and the ray parenchyma cells of poplar wood were degraded and destroyed after pectinase treatment.Compared with the untreated poplar wood,the evaporation rate of three sections of the specimen was changed.Especially the evaporation rate of radial and tangential direction was significantly increased.At the same time,based on the experimental data and fractal dimension deduction,fractal characteristics could be found in that the structure of poplars treated with pectinase.The porosity decreased with the increase of the fractal dimension in a certain range.It was shown that it is feasible to evaluate solar-driven water migration capacity by using fractal theory.

Studies of Transgenic Hybrid Poplar 741 Carrying Two Insect-resistant Genes

Partially modified Bt Cry1Ac gene and the arrowhead proteinase inhibitor (API) gene were used to construct a plant transformation vector pBtiA and this construct was transferred into the genome of the hybrid poplar 741 [ Populus alba L.×( P. davidiana Dode+ P. simonii Carr.)× P. tomentosa Carr.] by Agrobacterium _ mediated transformation. Ten kanamycin resistant plants have been regenerated. Upon insect bioassay using Clostera anachoreta (Fabricius), three of the examined plants were demonstrated to be highly resistant to the testing insects. The mortality of insect larvae on one plant was higher than 90% in 6 days after infestation and the growth of the survival larvae were seriously inhibited. Results of PCR and Southern blot analysis indicated that both Bt Cry1Ac gene and API gene were integrated as a single copy into the genomes of these three plants when Cry1Ac gene fragment was used as the probe. Protein dot blot immunoassay and ELISA analysis revealed that at least the Cry1Ac protein was produced in these three transgenic plants and the expression levels were estimated to be approximately 0.015% of the leaf total soluble protein. This is the first report on insect resistant transgenic hybrid poplar 741 that expresses two insecticidal protein genes.

Analysis of Codon Usage Between Different Poplar Species

Codon usage is the selective and nonrandom use of synonymous codons to encode amino acids in genes for proteins. The analysis of codon usage may improve the understanding of cocion preferences between different species and allow to rebuild the codons of exogenous genes to increase the expression efficiency of exogenous genes, Here, codon DNA sequence （CDS） of four poplar species, including Populus tremuloides Michx., P. tomentosa Carr., P. deltoides Marsh., and P. trichocarpa Torr. ＆ Gray., is used to analyze the relative frequency of synonymous codon （RFSC）. High-frequency codons are selected by high-frequency （HF） codon analysis. The results indicate that the codon usage is common for all four poplar species and the codon preference is quite similar among the four poplar species. However, CCT encoding for Pro, and ACT coding for Thr are the preferred codons in P. tremuloides and P. tomentosa, whereas CCA coding for Pro, and ACA coding for Thr are preferred in P. deltoides and P. trichocarpa The codons such as TGC coding for Cys, TTC coding for Phe, and AAG coding for Lys, are preferred in the poplar species except P trichocarpa. GAG coding for Glu is preferred only in P deltoides, while the other three poplar species prefer to use GAA. The commonness of preferred codon allows exogenous gene designed by the preferred cocion of one of the different poplar species to be used in other poplar species.

Cloning of cDNA Encoding COMT from Chinese White Poplar ( Populus tomentosa ), Sequence Analysis and Specific Expression

The cDNA fragment encoding caffeic acid 3_O_methyltransferase (COMT) in Chinese white poplar ( Populus tomentosa Carr.) was isolated and cloned by RT_PCR technique. The size of the cDNA fragment is 1 080 bp, which almost covers the whole cDNA_encoding region. Authors’ cDNA fragment in P. tomentosa shares 98.7% homology with the reported corresponding cDNA in the P. tremuloids at nucleotide level, 99.4% homology at amino acid level, respectively. The analysis of Northern dot hybridization showed that COMT is expressed specifically in the developing secondary xylem of stem during the season of xylem differentiation, which means the linkage between the gene expression for a monolignol biosynthetic enzyme and seasonal regulation of xylem development in woody plant.

Variation of microfibril angle and its correlation to wood properties in poplars

The microfibril angle of seven poplar clones was determined by using X-ray diffraction technique. Microfibril angle, wood basic density, fiber length, fiber width and cellulose content were assessed for every growth ring at breast height for all sample trees. Significant variation in microfibril angle was observed among growth rings. Mean microfibril angle (MFA) at breast height varied from 7.8?to 28?between growth rings with cambial age and showed a consistent pith-to-bark trend of decline an-gles. Analysis of variance also indicated that there were significant differences in wood basic density, fiber length, fiber width and cellulose content between the growth rings, which had an increasing tendency from pith to bark. Correlations between MFA and examined wood properties were predominantly large and significant negative (?0.01), and the coefficients were -0.660 for cellulose content, -0.586 for fiber length, -0.516 for fiber width and -0.450 for wood basic density, respectively. Regression analysis with linear and curve estimation indicated that a quadratic function showed the largest R2 and the least standard error for describing the relationships between microfibril angle and measured wood properties, and the correlation coefficients were over -0.45 (n=125). The results from this study suggested that microfibril angle would be a good characteristic for improvement in the future breeding program of poplars.

Effects of two kinds of transgenic poplar on protective enzymes system in the midgut of larvae of American white moth

The leaves of Bt (Bacillus thuringiensis) transgenic poplar (Populus nigra L.) and CpTI (Cowpea trypsin inhibitor) transgenic poplar ((P. tomentosa×P. bolleana)×P. Tomentosa) were taken to feed the 4th-5th-instar larvae of American white moth (Hyphantria cunea (Drury)) for determination of the activities of the protective enzyme system inside larvae’s body. The physiological and biochemical effects of the transgenic poplars on the larvae were studied. The results showed that the two kinds of transgenic poplars had similar effects on the protective enzyme system in the midgut of larvae. The activities of superoxide dismutase, catalase, and peroxidase in midgut of the larvae increased gradually, reached the highest value at a certain time, and then decreased suddenly. For the larvae that were fed with the leaves of Bt transgenic poplar, the peak value of superoxide dismutase and catalase presented at the time of 24-h feeding, while the peak of peroxidase took place at the time of 12-h feeding. The activities of these protective enzymes for the larvae that were fed with leaves of CpTI transgenic poplar peaked 12 h later than that of those fed with leaves of Bt transgenic poplar. The comparison of activities of the protective enzymes was also carried out between the larvae with different levels of intoxication. It was found that the activities of protective enzyme of the seriously intoxicant larvae were higher than that of the lightly intoxicant larvae. This difference was more obvious in the group treated with CpTI transgenic poplar.

Status and Advances of Molecular Genetic Improvement of Poplar Species in China

Poplars are among the most important deciduous tree species in China. China is replete with natural resources of poplars. Poplars have a number of good characteristics, including fast growth rate, high yield, many uses, easiness of tissue culture and small gene group that make them well suited as a model system for the application of genetic engineering in forest trees. In the last decade, much progress has been made in genetic improvement of poplar species in China. Modern biotechnology is an important tool for genetic improvement in forest trees, and its applications to genetic improvement in poplars, which covers genetic transformation, gene expression, construction of genetic linkage map, QTLs (quantitative trait loci) identification and molecular assisted selection are reviewed in this paper. At the same time, the existing problems and outlook about the application of modern biotechnology to genetic improvement in forest trees are also discussed.

Evaluation of soil nutrient status in poplar forest soil by soil nutrient systematic approach

A study was conducted to evaluate the soil nutrient status of poplar plantation by Soil Nutrient Systematic Approach (SNSA) in Jianghan Plain, Hubei Province, China. Soil physiochemical properties were analyzed in laboratory through collection soil samples of study site. Ten treatments of application different fertilizers were designed such as CK, optimum treatment (N, P, K, Zn), N(P, K, Zn), P(N, K, Zn), K(N, P, Zn), +Mg(N, P, K, Zn, Mg), Zn (N,P,K), +2P(N, 2P, K, Zn), +2K(N, P, 2K, Zn), and 2N+2P+2K(2N, 2P, 2K, Zn) for field experiment to test the effect on tree height, diameter (DBH) growth, and dry weight of poplar. The results showed that there was no significant difference in tree heights between treatments with different fertilizers, diameter growth of poplar trees in treatments of lack of N and Zn was significantly slower than that of trees in optimum treatment, and dry weight of poplar dropped significantly for treatment of CK as well as treatments without application N and Zn. It is concluded that N and Zn were main limiting factor for poplar growth. Results from laboratory analysis and field experiment were uniform per-fectly, which proved that SNSA was reliable in evaluating soil nutrient status of poplar plantation.

Effect of Continuous Cropping on Leaf Nutrient and Growth of Different Species of Poplar Plantation

[Objective]The paper was to study the effect of continuous cropping on leaf nutrient and growth of different species of poplar plantation.[Method] The tree height,diameter at breast height（DBH）,volume of different generations and species of poplar plantation in poplar production area in northern Jiangsu Province,as well as TN,TP and TK content in their leaves were determined through field investigation and indoor experiment.[Result] With the increasing generation,the changes of TN,TP and TK content in the leaves of different ages of two varieties of forest stand were also different.However,with the increasing tree ages,TN,TP and TK contents in leaves showed decrease trend.With the increasing generation,the changes of tree height of I-69 and I-72 poplar showed the similar trend.The effect of increasing generation on tree height of 7-year-old and 10-year-old poplar was relatively stable,showing decrease trend from generation to generation.The tree height of 4-year-old poplar first increased and then decreased with the increasing generation.The changes of DBH along with different generations were basically consistent with the changes of tree height.With the increasing cultivation generations,the volume of 7-year-old and 10-year-old poplar decreased with significant difference.[Conclusion ] The result provided basis for rational fertilization and management of poplar plantation,improvement of productivity of poplar plantation,and achievement of sustainable management of plantation.

Regional epidemic laws of poplar Ice Nucleation Active bacterial canker

Through the methods of correlation analysis and main factor analysis, the relationship between the poplar INA bacte-rial canker and circumstances was analyzed and 9 main factors for affecting the disease were selected. Based on the compre-hensive analysis of main factors and induced factors, the standard for risk grades of this disease was promoted and northeast region of China was divided into 4 districts with different risk grades: seriously occurring district, commonly occurring district, occasionally occurring district, and un-occurring district. Nonlinear regression analysis for six model curves showed that the Richard growth model was suitable for describing the temporal dynamics of poplar INA bacterial canker. By stepwise variable selection method, the multi-variable linear regression forecasting equation was set up to predict the next year抯 disease index, and the GM (1,1) model was also set up by grey method to submit middle or long period forecast.

Studies on adaptability of Populus bolleana and other Poplar trees in northwest Shanxi Province

Through five years (1996-2000) experiment, the growth characteristics and resistance to insect and cold of the seven poplar varieties including P. po pularis, P. opera, P. pseudo-simonii, P. beijinensis, P. bolleana, P. ( eurameri cana and P. simonii, which were planted in loess hilly land in northwest Shanxi Province, were tested under different planting densities and site conditions. A randomized block design and three times repetition were adopted in the test. Bas ed on the test results in arid and cold area of the northwest Shanxi, the hybrid poplar trees taking Populus cathaysna as their female parent could be selected for afforestation, such as P. popularis and P. opera, and the growing space of s ingle plant should be larger than 20 m2. P. bolleana as an introduced tree speci es grows well in this area, but its growth is likely affected by ground water co ndition. On the site with relatively abundant soil water, P. bolleana usually su ffer from frost crack at its trunk base. As a result, P. bolleara is suited to p lanting in the site where is short of soil water. P. x euramericana is not suita ble for large-scale afforestation, especially in arid slopes and ridges of loess hilly land .

Relationship between trophic component of different poplar strains and occurrence of Saperda poplnea

An experimental area of poplar was established in Songyuan of Jilin Province in 1999 for testing the resistance of different poplar stains to Saperda poplnea. Incidence of S. poplnea on ten poplar strains were investigated, and the main trophic component of branches of these poplar trees were measured and analyzed in April 2001. The results showed that there existed significant difference in population size of S. poplnea on different poplar strains, and the branches of these poplar strains have significant difference in nutrient component and content of amino acids. The population size of this pest had a significantly positive correlation with dissolvable total sugar and water content but had no significant correlation with content of total nitrogen and protein nitrogen.