Microscopic Pore and Filling Performance of Coal Gangue Cementitious Paste

To obtain the influence laws of the fine gangue rate on the properties of coal gangue cementitious paste, the slump, divergence, stratification, bleeding, setting time and mechanical strength with the change of fine gangue rate were studied on the basis of keeping the amount of cementing material and slurry concentration unchanged. The porosity and the distribution of pore diameter of the filling specimen for curing 28 d were tested by a mercury injection instrument under different fine gangue rate conditions. It was shown that the slump, divergence, setting time and compressive strength of the paste firstly increased and then decreased with increasing fine gangue rate. The stratification and bleeding rate decreased with increasing fine gangue rate. The smaller the critical pore size of the paste was, the smaller the porosity was, the smaller the average pore size was. When the fine gangue rate was 40%, the maximum critical pore diameter of the paste was 55.79 μm, and the corresponding porosity was 17.54%, and the properties of filling paste were the best. When the fine gangue rate further increased, the aggregate surface area increased, and the reaction product of cementitious materials could not effectively fill the pores. It weakened the agglomeration effect. The particles surface of coal gangue was fragmental and flake deposit with irregular shape and uneven fold morphology. It was easy to be bonded with the surface of other filling material. The hydration products of coal gangue cementitious material were a large number of C-S-H gel with fibrous shape and ettringite（AFt） with compact block structure. The theoretical reference was provided for the preparation of low cost gangue cemented filling materials in coal mines.

Real-time pore structure evolution difference between deep and shallow coal during gas adsorption:A study based on synchrotron radiation small-angle X-ray scattering

Coal seam CO_(2) sequestration is an important option to address global warming.A better knowledge on coal pore structure evolution during gas adsorption can provide guidance for coal seams CO_(2) seques-tration.However,few investigations on the pore structure evolution differences between the deep and shallow coal were conducted during gas adsorption.In this study,based on the real-time synchrotron radiation small-angle X-ray scattering(SAXS)observation,the average pore diameter and pore surface fractal dimension evolution differences between deep and shallow coal were investigated from the as-pects of coal compositions and stress history.Two types of coal deformation(inner-swelling and outer-swelling)coexist during gas adsorption.Coal compositions have significant impact on the dominance of deformation type.The dominance of inner-swelling in deep coal is induced by the higher ash contents,and there is the decrease of average pore diameter during gas adsorption.The impact of stress-history(burial depth)on adsorption-induced deformation is more prominent than that of gas adsorption ca-pacity.In deep coal,the surface fractal dimension evolution presents a negative correlation with the evolution of pore diameters.In shallow coal,the surface fractal dimension evolution presents a Langmuir-type correlation with the adsorption time.

Pyrolyzing soft template-containing poly(ionic liquid)into hierarchical N-doped porous carbon for electroreduction of carbon dioxide

Heteroatom-doped carbon materials have demonstrated great potential in the electrochemical reduction reaction of CO_(2)(CO_(2)RR)due to their versatile structure and function.However,rational structure control remains one challenge.In this work,we reported a unique carbon precursor of soft template-containing porous poly(ionic liquid)(PIL)that was directly synthesized via free-radical self-polymerization of ionic liquid monomer in a soft template route.Variation of the carbonization temperature in a direct pyrolysis process without any additive yielded a series of carbon materials with facile adjustable textural properties and N species.Significantly,the integration of soft-template in the PIL precursor led to the formation of hierarchical porous carbon material with a higher surface area and larger pore size than that from the template-free precursor.In CO_(2)RR to CO,the champion catalyst gave a Faraday efficiency of 83.0%and a current density of 1.79 mA·cm^(-2)at-0.9 V vs.reversible hydrogen electrode(vs.RHE).The abundant graphite N species and hierarchical pore structure,especially the unique hierarchical small-/ultramicropores were revealed to enable better CO_(2)RR performance.

Frost Resistance of Magnesium Oxychloride Cement Mortar Added with Highland Barley Straw Ash

In order to study the influence of highland barley straw ash (HBSA) prepared under certain conditions on the durability of magnesium oxychloride cement mortar (MOCM) under freeze-thaw damage,rapid freeze-thaw cycle tests were carried out firstly.The relative mass evaluation parameters and the relative compressive strength evaluation parameters,which represent the degradation of freeze-thaw resistance,were used as the indices to study the degradation rule of MOCM.Secondly,nuclear magnetic resonance (NMR) tests were carried out on MOCM under different freeze-thaw cycles to analyze the pore diameter changes in the freeze-thaw process.The microstructure of MOCM was tested by Fourier transform infrared spectroscopy (FTIR),X-ray diffraction (XRD) and scanning electron microscopy (SEM),and then the effect mechanism of HBSA on the anti-freezing performance of MOCM was revealed.Finally,the two-parameter Weibull distribution function was used to analyze the reliability of durability degradation of MOCM added with HBSA under freeze-thaw cycles.The specific conclusions are as follows:With the increase of HBSA's addition,the freeze-thaw resistance of MOCM increase firstly and then decrease.When the addition of HBSA is 10%,the decay rate of relative mass evaluation parameters and relative compressive strength evaluation parameters is the slowest,and the frost resistance is the best.The proportion of harmful pores and more harmful pores in MOCM added with 10% HBSA decreases by 25.11% and 21.34%,compared with that without HBSA before and after freeze-thaw cycles.A lot of magnesium silicate hydrate (M-S-H) gels are generated in MOCM with HBSA content of 10%,which fills part of the pores,so that the proportion of harmful pores and more harmful pores is the lowest.The Weibull function can be effectively applied to the reliability analysis of the freeze-thaw cycle of MOCM added with HBSA,and the theoretical results are in good agreement with the experimental results.

Wormholelike mesoporous carbon supported Pt Ru catalysts toward methanol electrooxidation

Wormholelike mesoporous carbons (WMCs) with three different pore diameters (D-P), namely WMC-F7 (D-p = 8.5 nm), WMC-F30 (D-p =4.4 nm), and WMC-F0 (D-p =3.1 nm) are prepared via a modified sol-gel process. Then PtRu nanoparticles with the particle size (40 of 3.2 nm supported on WMCs are synthesized with a modified pulse microwave-assisted polyol method. It is found that the pore diameter of WMCs plays an important role in the electrochemical activity of PtRu toward alcohol electrooxidation reaction. PtRu/WMC-F7 with D-p > 2d(pt) exhibits the largest electrochemical surface area (ESA) and the highest activity toward methanol electrooxidation. With the decrease in Dp, PtRu/WMC-F30 and PtRu/WMC-F0 have much lower ESA and electrochemical activity, especially for the isopropanol electrooxidation with a larger molecular size. When D-p is more than twice d(pt), the mass transfer of reactants and electrolyte are easier, and thus more PtRu nanoparticles can be utilized and the catalysts activity can be enhanced. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Effect of textural property of coconut shell-based activated carbon on desorption activation energy of benzothiophene

In this work,the effect of the textural property of activated carbons on desorption activation energy and adsorption capacity for benzothiophene(BT)was investigated.BET surface areas and the textural parameters of three kinds of the activated carbons,namely SY-6,SY-13 and SY-19,were measured with an ASAP 2010 instrument.The desorption activation energies of BT on the activated carbons were determined by temperature-programmed desorption(TPD).Static adsorption experiments were carried out to determine the isotherms of BT on the activated carbons.The influence of the textural property of the activated carbons on desorption activation energy and the adsorption capacity for BT was discussed.Results showed that the BET surface areas of the activated carbons,SY-6,SY-13 and SY-19 were 1106,1070 and 689 m2·g^(-1),respectively,and their average pore diameters were 1.96,2.58 and 2.16 nm,respectively.The TPD results indicated that the desorption activation energy of BT on the activated carbons,SY-6,SY-19 and SY-13 were 58.84,53.02 and 42.57 KJ/mol,respectively.The isotherms showed that the amount of BT adsorbed on the activated carbons followed the order of SY-6>SY-19>SY-13.The smaller the average pore diameter of the activated carbon,the stronger its adsorption for BT and the higher the activation energy required for BT desorption on its surface.The Freundlich adsorption isotherm model can be properly used to formulate the adsorption behavior of BT on the activated carbons.