Determining the soil-water retention curve using mercury intrusion porosimetry test in consideration of soil volume change

It is well-known that a close link exists between soil-water retention curve(SWRC)and pore size distribution(PSD).Theoretically,mercury intrusion porosimetry(MIP)test simulates a soil drying path and the test results can be used to deduce the SWRC(termed SWRCMIP).However,SWRCMIP does not include the effect of volume change,compared with the conventional SWRC that is directly determined by suction measurement or suction control techniques.For deformable soils,there is a significant difference between conventional SWRC and SWRCMIP.In this study,drying test was carried out on a reconstituted silty soil,and the volume change,suction,and PSD were measured on samples with different water contents.The change in the deduced SWRCMIP and its relationship with the conventional SWRC were analyzed.The results showed that the volume change of soil is the main reason accounting for the difference between conventional SWRC and SWRCMIP.Based on the test results,a transformation model was then proposed for conventional SWRC and SWRCMIP,for which the soil state with no volume change is taken as a reference.Comparison between the experimental and predicted SWRCs showed that the proposed model can well consider the influence of soil volume change on its water retention property.

Prediction of loess soil-water characteristic curve by mercury intrusion porosimetry

Mercury intrusion porosimetry(MIP)is a simple and fast way to obtain the pore distribution of soil and can be used to estimate the soil-water characteristic curve(SWCC).In previous studies,soil was assumed to be a perfect wettability material,and the contact angle(CA)of the soil-water interface was taken as zero in the SWCC prediction method.However,the CA has proved to be much greater than zero even for hydrophilic soils according to some soil wettability experiments,and it has a significant effect on predicting the SWCC.In this research,a method for predicting the SWCC by MIP,which takes the CA as a fitting coefficient,is proposed.The pore size distribution curves are measured by MIP,and the SWCCs of two loess soils are measured by pressure plate and filter paper tests.When the CA is taken as70°and 50°for the wetting and drying process,respectively,the SWCCs predicted by the pore size distribution curves agree well with the measured SWCCs.The predicted suction range of the proposed method is 0-105 k Pa.The consistency of the results suggests that utilizing the MIP test to predict the SWCC with a proper CA is effective for loess.

Fractal analysis of small-micro pores and estimation of permeability of loess using mercury intrusion porosimetry

Many popular models have been proposed to study the fractal properties of the pores of porous materials based on mercury intrusion porosimetry(MIP).However,most of these models do not directly apply to the small-micro pores of loess,which have a significant impact on the throat pores and tunnels for fluid flow.Therefore,in this study we used a combination of techniques,including routine physical examination,MIP analysis,and scanning electron microscope(SEM)image analysis,to study these small-micro pores and their saturated water permeability properties.The techniques were used to determine whether the fractal dimensions of six MIP fractal models could be used to evaluate the microstructure types and permeability properties of loess.The results showed that the Neimark model is suitable for analysis of small-micro pores.When applied to saturated water permeability,the results from this model satisfied the correlation significance test and were consistent with those from SEM analysis.A high clay content and density cause an increase in the number of small-micro pores,leading to more roughness and heterogeneity of the pore structure,and an increase in the fractal dimensions.This process further leads to a decrease in the content of macro-meso pores and saturated water permeability.Furthermore,we propose new parameters:the*Ellipse and its area ratios(*EAR).These parameters,coupled with 2D-SEM and 3D-MIP fractal dimensions,can effectively and quantitatively be used to evaluate the types of loess microstructures(from typeⅠto typeⅢ)and the saturated water permeability(magnitude from 1×10^(-4)cm/s to 1×10^(-5)cm/s).

Pore Structure Characteristics and Permeability of Deep Sedimentary Rocks Determined by Mercury Intrusion Porosimetry

Pore structure characteristics of rock are a great concern for researchers and practitioners in rock mechanics and rock engineering fields. In this study, mercury intrusion porosimetry（MIP） was used to measure pore size distribution, as well as several important index parameters of pore structure, for seven common types of deep sedimentary rocks with a total of fifty rock samples. Results show a similar pore size distribution pattern of the rock samples in the same lithological group, but remarkable differences among different lithological groups. Among seven investigated rock types, mudstone has the smallest porosity of 3.37%, while conglomerate has the largest value of 18.8%. It is also found that the porosity of rock types with finer grain size is lower than those with coarser grain size. Meanwhile, a comparison of frequency distribution at ten intervals of pore-throat diameter among seven types of sedimentary rocks reveals that different rock types have different dominant pore-size ranges. Furthermore, permeability of the investigated sedimentary rock samples was derived based on MIP data using reported theoretical equations. Among seven rock types, mudstone has the lowest averaged permeability（3.64×10^（-6） mD） while conglomerate has the highest one（8.59×10^（-4） mD）. From mudstone to conglomerate, rock permeability increases with an increase of grain size, with only an exception of siltstone which has a relatively larger porosity value. Finally, regression analysis show that there is a good fitting（R^2=0.95） between permeability and porosity which could be easily used to derive reliable permeability values of similar kinds of engineering rocks.

Transient infiltration tests in pyroclastic soils with double porosity

Fallout volcanic deposits of SommaVesuvius(Campania,southern Italy),characterized by the presence of layers with contrasting textural and hydraulic properties,are frequently affected by shallow landslides during rainwater infiltration.The soils of the stratigraphic sequence present intraparticle pores,originated by the gases escaped during magma decompression in the volcanic conduit,thus are characterized by double porosity(i.e.,intraparticle and interparticle pores),which is expected to affect their hydraulic behaviour,and to play a key role in rainwater infiltration through layered deposits.To understand the effect of double porosity on the hydraulic behaviour of the involved soils,controlled experiments have been carried out in an infiltration column.The experimental apparatus is provided with newly designed non-invasive Time Domain Reflectometry(TDR)probes,not buried in the investigated soil layers so as to minimize disturbance to the flow,allowing water content measurement during vertical flow processes.Specifically,transient flow experiments are carried out through reconstituted specimens of black scoriae and grey pumices,both loose pyroclastic granular soils from fallout deposits of Somma-Vesuvius,featuring double porosity with different pore size distributions,that were estimated by X-ray tomography and Mercury Intrusion Porosimetry.The experimental results highlight the effects of the double porosity and clearly indicate the different behaviour of the two soils during wetting and drying processes,mainly related to the different dimensions of intraparticle pores.

Determination of full-scale pore size distribution of Gaomiaozi bentonite and its permeability prediction

Gaomiaozi(GMZ)bentonite is a potential buffer/backfill material for a deep geological disposal of highlevel radioactive waste.It has a wide pore size distribution(PSD)with sizes ranging from several nanometers to more than one hundred microns.Thus,properly characterizing the pore structures of GMZ bentonite is a challenging issue.In this study,pressure-controlled porosimetry(PCP),ratecontrolled porosimetry(RCP),and scanning electron microscopy(SEM)were used to investigate the PSD of GMZ bentonite,The results indicate that each method has its limitation,and a combined use of PCP and RCP is suitable to obtain the full-scale PSD of GMZ bentonite.Moreover,we also compared the full-scale PSD with nuclear magnetic resonance(NMR)result.It is found that there is no significant difference in the range of PSD characterization between NMR and mercury intrusion method(PCP and RCP).However,in a ce rtain range,the detection accuracy of NMR is higher than that of mercury injection method.Finally,permeability prediction based on PCP and SEM data was conducted,and both of the two methods were found to be able to predict the permeability.The combined method is effective to obtain the full-scale PSD of GMZ bentonite,which is the key to estimation of the sealing ability of bentonite buffer.

Evaluation of the effect of sodium silicate addition to mine backfill,Gelfill-Part 2:Effects of mixing time and curing temperature

The effects of mixing time and curing temperature on the uniaxial compressive strength （UCS） andmicrostructure of cemented hydraulic fill （CHF） and sodium silicate-fortified backfill （Gelfill） wereinvestigated in the laboratory. A series of CHF and Gelfill samples was mixed for time periods rangingfrom 5 min to 60 min and cured at temperatures ranging from 5 C to 50 C for 7 d, 14 d or 28 d.Increasing the mixing time negatively influenced the UCS of Gelfill samples, but did not have a detectableeffect on CHF samples. The curing temperature had a strong positive impact on the UCSs of both Gelfilland CHF. An elevated temperature caused rapid UCS development over the first 14 d of curing. Mercuryintrusion porosimetry （MIP） indicated that the pore size distribution and total porosity of Gelfill werealtered by curing temperature.

Evaluation of the effect of sodium silicate addition to mine backfill,GelfillLPart 1

In this paper, the mechanical properties of sodium silicate-fortified backfill, called Gelfill, were investigated by conducting a series of laboratory experiments. Two configurations were tested, i.e. Gelfill and cemented hydraulic fill（CHF）. The Gelfill has an alkali activator such as sodium silicate in its materials in addition to primary materials of mine backfill which are tailings, water and binders. Large numbers of samples of Gelfill and CHF with various mixture designs were cast and cured for over 28 d. The mechanical properties of samples were investigated using uniaxial compression test, and the results were compared with those of reference samples made without sodium silicate. The test results indicated that the addition of an appropriate amount of an alkali activator such as sodium silicate can enhance the mechanical（uniaxial compressive strength） and physical（water retention） properties of backfill. The microstructure analysis conducted by mercury intrusion porosimetry（MIP） revealed that the addition of sodium silicate can modify the pore size distribution and total porosity of Gelfill, which can contribute to the better mechanical properties of Gelfill. It was also shown that the time and rate of drainage in the Gelfill specimens are less than those in CHF specimens made without sodium silicate. Finally, the study showed that the addition of sodium silicate can reduce the required setting time of mine backfill, which can contribute to increase mine production in accordance with the mine safety.

Fractal Analysis of Gas Diffusion Layer in PEM Fuel Cells

The aim of this study is to show how fractal analysis can be effectively used to characterize the texture of porous solids. The materials under study were carbon papers, the backing material of the gas diffusion layer （GDL） in Proton Exchange Membrane Fuel Cell （PEMFC）. The fractal dimensions were calculated by analyzing data from mercury porosimetry. The polytotrafluoroethylene （PTFE） treated carbon paper shows a significantly high fractal dimension value than pare sample, and the high fractal dimension signifies that the physical complexity of the pore surface is enhanced. The fractal dimension can be used as a valid parameter to monitor the textural evolution of the samples as the treatment progresses, as this behaves in a similar way to other textural parameters. The use of fractal analysis in conjunction with the results of classical characterization methods leads to a better understanding of textural modificatious in the processing of materials.

Significance of compaction time delay on compaction and strength characteristics of sulfate resistant cement-treated expansive soil

The addition of cement for stabilization of expansive soils is one of the most commonly used methods.As with every calcium-based stabilizer,the time delay between the physical mixing of the stabilizer and compaction plays an important role in achieving the desired results after stabilization.However,a clear insight on the determination of optimum time delay for achieving the maximum desired compaction properties of cement-stabilized soils is yet to be established.Furthermore,the recent studies highlighted the use of sulfate to mitigate the negative effect of compaction time delay.The only drawback with the use of sulfate along with calcium-based stabilizers is the formation of ettringite,which deteriorates the stabilized soil matrix.In view of this,the present study is aimed at using the sulfate resistant cement(SRC)as a stabilizer along with the controlled addition of sulfate solutions to mitigate the negative effect of compaction time delay in stabilizing the expansive soil.To bring out the above effects,three periods of time delays(0 h,6 h and 24 h)and three sulfate concentrations of 5000 parts per million(ppm),10,000 ppm and 20,000 ppm were adopted.The experimental results showed that the delay in compaction resulted in the formation of clogs and reduction of strength of SRC-stabilized expansive soil.Upon sulfate addition to SRC-stabilized expansive soil,the formation clogs was not curtailed and resulted in the formation of ettringite clusters.These formations were captured with the help of scanning electron microscope(SEM)images and validated with electron dispersive X-ray spectroscopy(EDAX)analysis.Further,an attempt is also made to explain the mechanism of density and strength reduction with the aid of physico-chemical properties and mercury intrusion porosimetry(MIP)studies.

Characterization of microstructural features of Tamusu mudstone

Tamusu mudstone formation, located in the Alxa area in western Inner Mongolia, is considered a potential host formation for high-level radioactive waste(HLW) underground disposal in China. In this study, complementary analyses with X-ray diffraction(XRD), field emission scanning electron microscopy(FE-SEM), mercury intrusion porosimetry(MIP), and N_(2) physisorption isotherm were conducted on the Tamusu mudstone to characterize its physical characteristics and microstructural features, such as mineral compositions and pore structure. Several minerals, including carbonates, feldspar, clays and analcime, were identified in Tamusu mudstone by XRD. Images from FE-SEM show that pores in the Tamusu mudstone were dominantly on nanometer scale and generally located within their mineral matrix or at the interface with non-porous minerals. The combination of the MIP and N_2 physisorption curves indicated that the Tamusu mudstone has diverse pore sizes, a porosity varying from 2.34% to 2.84%, and a total pore volume in the range of 0.0065—0.0222 cm^(3)/g with the average pore diameter ranging from 9.6 nm to 19.23 nm. The specific surface area measured by MIP(2.572—5.861 m^(2)/g) was generally higher than that by N_(2) physisorption(1.29—3.04 m^(2)/g), due to the pore network effect, pore shape(e.g. ink-bottle shape), or technique limits. The results related to pore information can be applied as an input in the future to model single-or multi-phase fluid flow and the transport of radionuclides in porous geomedium by migration and diffusion.

Analysis on Pore Structure of Non-Dispersible Underwater Concrete in Saline Soil Area

In this paper,mercury intrusion porosimetry(MIP)is used to test the pore structure of non-dispersible underwater concrete so as to study the influence of pouring and curing environment,age and slag powder on the pore characteristics of concrete,analyze the pore characteristics,porosity and pore distribution of concrete in different hydration stages,and reveal the relationship between pore structure and permeability of concrete.The results show that the pore-size distribution of concrete in fresh water condition is better than that in sulfate environment and mixed salt environment,and therefore,sulfate as well as mixed salt are not conducive to the development of pore structure of non-dispersible underwater concrete;chlorine salt has little effect on the pore structure of nondispersible underwater concrete;under the three conditions of sulfate,chlorine and mixed salt,the porosity of concrete mixed with slag powder is lower than that of concrete without slag powder.The results indicate that the addition of slag powder can ameliorate the pore size distribution of non-dispersed underwater concrete,reduce the porosity,and make the concrete structure more compact,which is beneficial to improve the permeability resistance of concrete at the macro level.

Pore Structure of Cement Pastes Mixed with Inorganic Salts

The influence of salts on concrete durability,pore structure of cement pastes with inorganic salts,including CaCl2,NaCl,Na2SO4,NaNO2,Ca(NO3)2 and Ca(NO2)2,was studied through mercury intrusion porosimetry (MIP),and hydration degree of each paste was also tested.The results show that porosity of the paste with inorganic salt cured for 3 d or 28 d was related with its hydration degree.For the pore size distribution,the pores smaller than 50 nm in paste with salts cured for 3 d increased;the amount of pores larger than 100 nm increased because of the addition of Ca (NO3)2 at 3 d,but these coarse pores turned into fine pores and reduced significantly at 28 d;coarse pores lager than 1000 nm in cement pastes containing NaCl and Na2SO4 increased.

The Effect of Mix-Design and Corrosion Inhibitors on the Durability of Concrete

The deterioration of concrete over time is the result of various mechanical, physical, chemical and biological processes, with the corrosion of reinforcement being the most serious problem of durability of reinforced concrete structures. Over the last 50 years, a tremendous effort has been spent by the international scientific community with laboratory research and experimental field studies in order to increase the resistance of concrete over corrosion. This paper presents an experimental study of the corrosion behavior of 5 different concrete mix designs. The compositions were developed as per the latest concrete regulations and International Standards which are as follows: conventional concrete C30/37, conventional concrete with corrosion inhibitor as an additive, conventional concrete with surface spray sealant, fine aggregate concrete and self-compacting concrete. Their behavior against corrosion was determined via the following tests: water absorption test, water permeability test, mercury intrusion porosimetry, rapid chloride penetration test (RCPT), and accelerated carbonation test. The experimental results showed that the corrosion systems examined in the study provide anti-corrosion protection on steel rebars against corrosion comparing with the reference group. Also, an inversely proportional relationship of the water/cement ratio of a composition with its corrosion behavior was observed. Smaller w/c values (0.4 instead of 0.5) lead to better anti-corrosion resistance. In addition, an analogous relationship between the cement content of a composition and its corrosion behavior was observed.

Corrosion Protection of CNTs/CNFs Modified Cement Mortars

The aim of this study is to examine the performance of nano additives in two different sets of mortar specimens armed with reinforcing steel rebars. In particular, three sets of reinforced concrete cylinders with additives of 0.1% wt of carbon nanotubes (CNTs) and carbon nanofibers (CNFs) have been exposed to a solution of 3.5% NaCl, and further examined for the impact of nano-modification on corrosion performance. The anti-corrosive performance of these additives was investigated through linear polarization technique (LPR), mass loss and mercury porosimetry technique (MIP). From the investigation results, it is found that the addition of CNTs/CNFs causes lower steel corrosion, whereas the pore structure of concrete with CNTs/CNFs can significantly reduce the mass loss rate and the relative permeability.

Development of Fast Dissolving Tablets Containing Fexofenadine Hydrochloride Prepared by Lyophilization Technique

Objectives: To improve the aqueous solubility and dissolution of fexofenadine HCl, an attempt was made to prepare its fast dissolving tablets by lyophilization technique. Methods: For the preparation of lyophilized tablets (F1-F32), the drug was dispersed in a hydrated solution of water-soluble polymers (gelatin/maltodextrin/acacia) containing glycine and mannitol. The blend was pelted down into the patches of a blister pack, frozen down and then lyophilized. Different characterization parameters viz. differential scanning calorimetry, hardness, weight variation, X-ray diffraction (XRD), scanning electron microscopy (SEM), mercury porosimetry, solubility, wetting time and water absorption ratio, lyophilization tablet index, drug content, in vitro dissolution and stability were evaluated. Key findings: Tablets (F32) containing acacia were found to have fast disintegration and relatively higher mechanical strength with improved drug solubility. X-ray diffractogram and scanning electron micrograph indicated decrease in crystallinity of drug and a good porous structure property for prepared tablet, respectively. Dissolution study showed complete drug released within 5 min. Moreover, tablets (F32) were found to be stable for one month at 25 ± 2 °C/60 ± 5% relative humidity.

Fractal characterization of pore microstructure evolution in carbon/carbon composites

A fractal characterization approach was proposed to research pore microstructure evolution in car- bon/carbon (C/C) composites during the chemical vapor infiltration process. The data obtained from mercury porosimetry determinations were analyzed using the sponge fractal model and the thermo- dynamics relation fractal model, respectively. The fractal dimensions of C/C composites at different densification stages were evaluated. The pore microstructure evolution with densification time was studied by fractal dimension analysis. The results showed that C/C composites belong to porous frac- tal structure. The fractal dimensions increase on the whole with decreasing porosity as the densifica- tion proceeds. The fractal dimensions are influenced by the texture of pyrocarbon and decrease with increasing anisotropy from isotropic pyrocarbon to high textural one. Both the complicacy of pore structure and the textural morphology of pyrocarbon can be represented simultaneously by the fractal dimension. The pore evolution of C/C composites in the densification process can be monitored using fractal dimension.

Pore structure of cementitious material enhanced by graphitic nanomaterial： a critical review

Carbon nano tubes （CNT） has been introduced as an efficient nanomaterial in order to improve the mechanical and durability properties of concrete. The effect of CNT on the microstructures of cementitious materials has been widely reported. This paper combines a critical review on the effect of CNT on the pore and microstructure of cement composite with a discussion on the porosity measurement of pastes containing CNT using mercury intrusion porosimetry techniques （MIP）. It was found that, surface treatment by H2SO4 and HNO3 solution forms carboxyl acid groups on CNTs＇ surfaces that lead to the improvement of reinforcement. In this scope, this review paper involves analyzing the effect of CNT on the microstructure and the pore structure of cementitious materials. The existing methods of measuring the porosity of cementitious material are reviewed, in particular, the contact angle measurement is discussed in detail in which the most effective parameters and possible errors of calculation is presented.