The effect of deformation of porous material on infiltrative performance is investigated. Based on Darcy theory and Boit principle, the Reynolds equation and mathematical expression of deformable metal rubber （MR） m...The effect of deformation of porous material on infiltrative performance is investigated. Based on Darcy theory and Boit principle, the Reynolds equation and mathematical expression of deformable metal rubber （MR） material under laminar flow are obtained according to the change of porosity of metal rubber. It is shown that the throttle of MR material is dependent on its porosity and diameter of metal wires. It will be of great value for the application of MR in throttle field.展开更多
The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The infl...The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50%（wt.%）, percentage of coal powder of 30%（wt.%）, sintering temperature of 1130°C,and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.展开更多
基金This project is supported by National Natural Science Foundation of China (No.50075017)Municipal Youth Foundation of Harbin, China(No.2003AFQXJ035).
文摘The effect of deformation of porous material on infiltrative performance is investigated. Based on Darcy theory and Boit principle, the Reynolds equation and mathematical expression of deformable metal rubber （MR） material under laminar flow are obtained according to the change of porosity of metal rubber. It is shown that the throttle of MR material is dependent on its porosity and diameter of metal wires. It will be of great value for the application of MR in throttle field.
基金supported by the High-Tech Research and Development Program(863)of China(No.2011AA06A105)
文摘The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50%（wt.%）, percentage of coal powder of 30%（wt.%）, sintering temperature of 1130°C,and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.
