A reaction bonding technique and a method of layer coating were developed to fabricate porous SiC.The green body was prepared using 250.0μm SiC particles as the raw material,fineα-Al2O3 and SiC powders with mass rat...A reaction bonding technique and a method of layer coating were developed to fabricate porous SiC.The green body was prepared using 250.0μm SiC particles as the raw material,fineα-Al2O3 and SiC powders with mass ratio of 2.5:1as sintering additives,65.2μm graphite as the pore-forming agent and polyvinyl alcohol(PVA)as the binder.The micro powders were coated on the surface of coarse SiC particles.After sintering,fine SiC particles were oxidized to silica(SiO2)then transforming into cristobalite,which finally reacted withα-Al2O3 to produce mullite(3Al2O3·2SiO2).The results show that SiC particles are bonded by the mullite and oxidation-derived SiO2.The apparent porosity of the specimens decreases from 31.3%to 20.5%with the amount of micro powders increasing from 5 mass%to 20 mass%.The bending strength increases at the first stage and then decreases with the increase of fine powders,and the specimen with 10 mass%of fine powders shows relatively high bending strength of 23.5 MPa.展开更多
Si3N4 ceramics were prepared by pressureless sintering at 1 650 ℃ in nitrogen atmosphere using Si3N4 powder as main starting material and adding nano Al203 powder （3%, 6%, 9%, 12%, and 15% in mass, the same hereinaf...Si3N4 ceramics were prepared by pressureless sintering at 1 650 ℃ in nitrogen atmosphere using Si3N4 powder as main starting material and adding nano Al203 powder （3%, 6%, 9%, 12%, and 15% in mass, the same hereinafter）. The bending strength and fracture toughness （KIC） of the specimens were detected.The microstructure and phase compositions of the specimens were analyzed. The results show that SigN4 ceramics can be prepared by pressureless sintering when adding 9% -12% nano-A1203 as active reactant, which dissolves in Si3N4, in-situ forming non-oxide SiAION. The obtained Si3N4 ceramics have the maximum bending strength of 710. 86 MPa and KIC of 8. 61 MPa · m1/2 The exceUent properties come from many interwoven structures distributed uniformly in the ceramics matrix, u,hich is composed of big and firm plate-like β-Si3N., hexagonal SiAION and sheet Si2N2 0.展开更多
基金financially supported by National Key R&D Program of China (Grant No.: 2016YFB0601100)State Key Laboratory of Multi-phase Complex Systems (MPCS-2017- A-06)
文摘A reaction bonding technique and a method of layer coating were developed to fabricate porous SiC.The green body was prepared using 250.0μm SiC particles as the raw material,fineα-Al2O3 and SiC powders with mass ratio of 2.5:1as sintering additives,65.2μm graphite as the pore-forming agent and polyvinyl alcohol(PVA)as the binder.The micro powders were coated on the surface of coarse SiC particles.After sintering,fine SiC particles were oxidized to silica(SiO2)then transforming into cristobalite,which finally reacted withα-Al2O3 to produce mullite(3Al2O3·2SiO2).The results show that SiC particles are bonded by the mullite and oxidation-derived SiO2.The apparent porosity of the specimens decreases from 31.3%to 20.5%with the amount of micro powders increasing from 5 mass%to 20 mass%.The bending strength increases at the first stage and then decreases with the increase of fine powders,and the specimen with 10 mass%of fine powders shows relatively high bending strength of 23.5 MPa.
文摘Si3N4 ceramics were prepared by pressureless sintering at 1 650 ℃ in nitrogen atmosphere using Si3N4 powder as main starting material and adding nano Al203 powder （3%, 6%, 9%, 12%, and 15% in mass, the same hereinafter）. The bending strength and fracture toughness （KIC） of the specimens were detected.The microstructure and phase compositions of the specimens were analyzed. The results show that SigN4 ceramics can be prepared by pressureless sintering when adding 9% -12% nano-A1203 as active reactant, which dissolves in Si3N4, in-situ forming non-oxide SiAION. The obtained Si3N4 ceramics have the maximum bending strength of 710. 86 MPa and KIC of 8. 61 MPa · m1/2 The exceUent properties come from many interwoven structures distributed uniformly in the ceramics matrix, u,hich is composed of big and firm plate-like β-Si3N., hexagonal SiAION and sheet Si2N2 0.
