In this paper,we present a robot vision based system for coordinate measurement of feature points on large scale automobile parts.Our system consists of an industrial 6-DOF robot mounted with a CCD camera and a PC.The...In this paper,we present a robot vision based system for coordinate measurement of feature points on large scale automobile parts.Our system consists of an industrial 6-DOF robot mounted with a CCD camera and a PC.The system controls the robot into the area of feature points.The images of measuring feature points are acquired by the camera mounted on the robot.3D positions of the feature points are obtained from a model based pose estimation that applies to the images.The measured positions of all feature points are then transformed to the reference coordinate of feature points whose positions are obtained from the coordinate measuring machine（CMM）.Finally,the point-to-point distances between the measured feature points and the reference feature points are calculated and reported.The results show that the root mean square error（RMSE） of measure values obtained by our system is less than 0.5 mm.Our system is adequate for automobile assembly and can perform faster than conventional methods.展开更多
Full gap closing is a prerequisite for hosting Majorana zero modes in Josephson junctions on the surface of topological insulators.Previously,we have observed direct experimental evidence of gap closing in Josephson j...Full gap closing is a prerequisite for hosting Majorana zero modes in Josephson junctions on the surface of topological insulators.Previously,we have observed direct experimental evidence of gap closing in Josephson junctions constructed on Bi2Te3 surface.In this paper we report further investigations on the position dependence of gap closing as a function of magnetic flux in single Josephson junctions constructed on Bi2Te3 surface.展开更多
基金wsupported by the Thailand Research Fund and Solimac Automation Co.,Ltd.under the Research and Researchers for Industry Program(RRI)under Grant No.MSD56I0098Office of the Higher Education Commission under the National Research University Project of Thailand
文摘In this paper,we present a robot vision based system for coordinate measurement of feature points on large scale automobile parts.Our system consists of an industrial 6-DOF robot mounted with a CCD camera and a PC.The system controls the robot into the area of feature points.The images of measuring feature points are acquired by the camera mounted on the robot.3D positions of the feature points are obtained from a model based pose estimation that applies to the images.The measured positions of all feature points are then transformed to the reference coordinate of feature points whose positions are obtained from the coordinate measuring machine（CMM）.Finally,the point-to-point distances between the measured feature points and the reference feature points are calculated and reported.The results show that the root mean square error（RMSE） of measure values obtained by our system is less than 0.5 mm.Our system is adequate for automobile assembly and can perform faster than conventional methods.
基金Project supported by the National Basic Research Program of China(Grant Nos.2009CB929101 and 2011CB921702)the National Natural Science Foundation of China(Grant Nos.91221203,11174340,11174357,91421303,and 11527806)the Strategic Priority Research Program B of the Chinese Academy of Sciences(Grant No.XDB07010100)
文摘Full gap closing is a prerequisite for hosting Majorana zero modes in Josephson junctions on the surface of topological insulators.Previously,we have observed direct experimental evidence of gap closing in Josephson junctions constructed on Bi2Te3 surface.In this paper we report further investigations on the position dependence of gap closing as a function of magnetic flux in single Josephson junctions constructed on Bi2Te3 surface.
