At present monoethanolamine(MEA) remains as the standard industrial solvent for CO_2 capture processes. But due to the degradation and high energy consumption problems of MEA, new efficient solvents should be found. I...At present monoethanolamine(MEA) remains as the standard industrial solvent for CO_2 capture processes. But due to the degradation and high energy consumption problems of MEA, new efficient solvents should be found. In the present work, the absorption and regeneration performance of a hybrid solvent MEA-methanol was studied and compared to the aqueous solutions of monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA) in a bubbling reactor. Also the performance of MEA-methanol solutions(including the absorption performance, regeneration performance,cyclic absorption performance, density and viscosity) was studied with different MEA concentrations. A pilot-plant CO_2 capture test bed was used to study the potential of MEA-methanol to replace aqueous MEA in industrial use. The results showed that the initial absorption rate of MEA-methanol solvent is the fastest compared with other solvents. The 30% MEA-methanol had a faster mass transfer coefficient, a higher CO_2 absorption efficiency and a lower regeneration energy consumption than aqueous MEA. And through the study of the reaction heat of CO_2 into MEA-methanol and aqueous MEA,it can be concluded that the desorption heat of rich MEA-methanol is only about 30% of rich aqueous MEA solvent in the regeneration process which showed that 30% MEA-methanol solvent is a promising candidate for CO_2 capture.展开更多
Benzylamine(BZA) has been identified as a promising candidate for CO_2 capture process; however the evaluation of BZA in the packed column was very few. Thus, in this work, the absorption and regeneration performance ...Benzylamine(BZA) has been identified as a promising candidate for CO_2 capture process; however the evaluation of BZA in the packed column was very few. Thus, in this work, the absorption and regeneration performance of unblended BZA solvent as well as a series of amine concentrations and ratios in the formulations were studied using a semibatch bubbling reactor. And due to the formation of ivory-white precipitates in solvents containing higher BZA ratios, a 4:1 molar ratio of MEA/BZA mixed solvent was used to study its performance in a pilot-scale test bed. The results showed that a higher BZA ratio in the MEA/BZA mixed solvent resulted in a faster absorption rate, a higher mass transfer and heat transfer rate and a better cyclic performance, but the mass transfer rate of BZA decreased more quickly than MEA with the increase of CO_2 loading of the solvents. In addition, at high CO_2 loading in the MEA/ BZA mixed solvent with a molar ratio of 4:1, the ivory-white precipitates were generated which could cause blockage of the packing in the absorber, the stripper and the liquid pipelines.展开更多
Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and ...Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and mitigate climate change.In this process,a metal oxide is used as oxygen carrier in a dual fluidized bed to generate clean CO_(2) via combustion of biomass.Most commonly,natural ores or synthetic materials are used as oxygen carrier whereas both must meet special requirements for the conversion of solid fuels.Synthetic oxygen carriers are characterized by higher reactivity at the expense of higher costs versus the lower-cost natural ores.To determine the viability of both possibilities,a techno-economic comparison of a synthetic material based on manganese,iron,and copper to the natural ore ilmenite was conducted.The synthetic oxygen carrier was characterized and tested in a pilot plant,where high combustion efficiencies up to 98.4%and carbon capture rates up to 98.5%were reached.The techno-economic assessment resulted in CO_(2) capture costs of 75 and 40€/tCO_(2) for the synthetic and natural ore route respectively,whereas a sensitivity analysis showed the high impact of production costs and attrition rates of the synthetic material.The synthetic oxygen carrier could break even with the natural ore in case of lower production costs and attrition rates,which could be reached by adapting the production process and recycling material.By comparison to state-of-the-art technologies,it is demonstrated that both routes are viable and the capture cost of CO_(2) could be reduced by implementing the chemical looping combustion technology.展开更多
Under the pressure of carbon neutrality,many carbon capture,utilization and storage technologies have witnessed rapid development in the recent years,including oxy-fuel combustion(OFC)technology.However,the convention...Under the pressure of carbon neutrality,many carbon capture,utilization and storage technologies have witnessed rapid development in the recent years,including oxy-fuel combustion(OFC)technology.However,the conventional OFC technology usually depends on the flue gas recirculation system,which faces significant investment,high energy consumption,and potential low-temperature corrosion problem.Considering these deficiencies,the direct utilization of pure oxygen to achieve particle fluidization and fuel combustion may reduce the overall energy consumption and CO_(2)-capture costs.In this paper,the fundamental structure of a self-designed 130 t·h^(-1) pure-oxygen combustion circulating fluidized bed(CFB)boiler was provided,and the computational particle fluid dynamics method was used to analyze the gas-solid flow characteristics of this new-concept boiler under different working conditions.The results indicate that through the careful selection of design or operational parameters,such as average bed-material size and fluidization velocity,the pure-oxygen combustion CFB system can maintain the ideal fluidization state,namely significant internal and external particle circulation.Besides,the contraction section of the boiler leads to the particle backflow in the lower furnace,resulting in the particle suspension concentration near the wall region being higher than that in the center region.Conversely,the upper furnace still retains the classic core-annulus flow structure.In addition to increasing solid circulation rate by reducing the average bed-material size,altering primary gas ratio and bed inventory can also exert varying degrees of influence on the gas-solid flow characteristics of the pure-oxygen combustion CFB boiler.展开更多
As an industrial solid waste,pyrite cinder exhibited excellent reactivity and cycle stability in chemical looping combustion.Prior to the experiment,oxygen carriers often experienced a high temperature calcination pro...As an industrial solid waste,pyrite cinder exhibited excellent reactivity and cycle stability in chemical looping combustion.Prior to the experiment,oxygen carriers often experienced a high temperature calcination process to stabilize the physico-chemical properties,which presented significant influence on the redox performance of oxygen carriers.However,the effect of calcination temperature on the cyclic reaction performance of pyrite cinder has not been studied in detail.In this work,the effect of calcination temperature on the redox activity and attrition characteristic of pyrite cinder were studied in a fluidizedbed reactor using CH_(4) as fuel.A series of pyrite cinder samples were prepared by controlling the calcination temperature.The redox activity and attrition rate of the obtained pyrite cinder samples were investigated deeply.The results showed that calcination temperature displayed significant impact on the redox performance of pyrite cinder.Considering CH_(4) conversion(80%–85%)and attrition resistance,the pyrite cinder calcined at 1050℃ presented excellent redox properties.In the whole experiment process,the CO_(2) selectivity of the pyrite cinder samples were not affected by the calcination temperature and were still close to 100%.The results can provide reference for optimizing the calcination temperature of pyrite cinder during chemical looping process.展开更多
Chemical absorption using amine-based solvents have proven to be the most studied,as well as the most reliable and efficient technology for capturing carbon dioxide(CO_(2))from exhaust gas streams and synthesis gas in...Chemical absorption using amine-based solvents have proven to be the most studied,as well as the most reliable and efficient technology for capturing carbon dioxide(CO_(2))from exhaust gas streams and synthesis gas in all combustion and industrial processes.The application of single amine-based solvents especially the very reactive monoethanolamine(MEA)is associated with a parasitic energy demand for solvent regeneration.Since regeneration energy accounts for up to threeequarters of the plant operating cost,efforts in its reduction have prompted the idea of using blended amine solvents.This review paper highlights the success achieved in blending amine solvents and the recent and future technologies aimed at increasing the overall volumetric mass transfer coefficient,absorption rate,cyclic capacity and greatly minimizing both degradation and the energy for solvent regeneration.The importance of amine biodegradability(BOD)and low ecotoxicity as well as low amine volatility is also highlighted.Costs and energy penalty indices that influences the capital and operating costs of CO_(2) capture process was also highlighted.A new experimental method for simultaneously estimating amine cost,degradation rate,regeneration energy and reclaiming energy is also proposed in this review paper.展开更多
基金supported by the Sinopec Ningbo Engineering Co., Ltd.(No.l4850000-14-ZC0609-0003, H8XY-0032)
文摘At present monoethanolamine(MEA) remains as the standard industrial solvent for CO_2 capture processes. But due to the degradation and high energy consumption problems of MEA, new efficient solvents should be found. In the present work, the absorption and regeneration performance of a hybrid solvent MEA-methanol was studied and compared to the aqueous solutions of monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA) in a bubbling reactor. Also the performance of MEA-methanol solutions(including the absorption performance, regeneration performance,cyclic absorption performance, density and viscosity) was studied with different MEA concentrations. A pilot-plant CO_2 capture test bed was used to study the potential of MEA-methanol to replace aqueous MEA in industrial use. The results showed that the initial absorption rate of MEA-methanol solvent is the fastest compared with other solvents. The 30% MEA-methanol had a faster mass transfer coefficient, a higher CO_2 absorption efficiency and a lower regeneration energy consumption than aqueous MEA. And through the study of the reaction heat of CO_2 into MEA-methanol and aqueous MEA,it can be concluded that the desorption heat of rich MEA-methanol is only about 30% of rich aqueous MEA solvent in the regeneration process which showed that 30% MEA-methanol solvent is a promising candidate for CO_2 capture.
基金supported by the Sinopec Ningbo Engineering Co. Ltd. (No.l4850000-14-ZC0609-0003,H8XY-0032)
文摘Benzylamine(BZA) has been identified as a promising candidate for CO_2 capture process; however the evaluation of BZA in the packed column was very few. Thus, in this work, the absorption and regeneration performance of unblended BZA solvent as well as a series of amine concentrations and ratios in the formulations were studied using a semibatch bubbling reactor. And due to the formation of ivory-white precipitates in solvents containing higher BZA ratios, a 4:1 molar ratio of MEA/BZA mixed solvent was used to study its performance in a pilot-scale test bed. The results showed that a higher BZA ratio in the MEA/BZA mixed solvent resulted in a faster absorption rate, a higher mass transfer and heat transfer rate and a better cyclic performance, but the mass transfer rate of BZA decreased more quickly than MEA with the increase of CO_2 loading of the solvents. In addition, at high CO_2 loading in the MEA/ BZA mixed solvent with a molar ratio of 4:1, the ivory-white precipitates were generated which could cause blockage of the packing in the absorber, the stripper and the liquid pipelines.
文摘Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and mitigate climate change.In this process,a metal oxide is used as oxygen carrier in a dual fluidized bed to generate clean CO_(2) via combustion of biomass.Most commonly,natural ores or synthetic materials are used as oxygen carrier whereas both must meet special requirements for the conversion of solid fuels.Synthetic oxygen carriers are characterized by higher reactivity at the expense of higher costs versus the lower-cost natural ores.To determine the viability of both possibilities,a techno-economic comparison of a synthetic material based on manganese,iron,and copper to the natural ore ilmenite was conducted.The synthetic oxygen carrier was characterized and tested in a pilot plant,where high combustion efficiencies up to 98.4%and carbon capture rates up to 98.5%were reached.The techno-economic assessment resulted in CO_(2) capture costs of 75 and 40€/tCO_(2) for the synthetic and natural ore route respectively,whereas a sensitivity analysis showed the high impact of production costs and attrition rates of the synthetic material.The synthetic oxygen carrier could break even with the natural ore in case of lower production costs and attrition rates,which could be reached by adapting the production process and recycling material.By comparison to state-of-the-art technologies,it is demonstrated that both routes are viable and the capture cost of CO_(2) could be reduced by implementing the chemical looping combustion technology.
基金supported by the National Key Research and Development Program of China(2022YFB4100305).
文摘Under the pressure of carbon neutrality,many carbon capture,utilization and storage technologies have witnessed rapid development in the recent years,including oxy-fuel combustion(OFC)technology.However,the conventional OFC technology usually depends on the flue gas recirculation system,which faces significant investment,high energy consumption,and potential low-temperature corrosion problem.Considering these deficiencies,the direct utilization of pure oxygen to achieve particle fluidization and fuel combustion may reduce the overall energy consumption and CO_(2)-capture costs.In this paper,the fundamental structure of a self-designed 130 t·h^(-1) pure-oxygen combustion circulating fluidized bed(CFB)boiler was provided,and the computational particle fluid dynamics method was used to analyze the gas-solid flow characteristics of this new-concept boiler under different working conditions.The results indicate that through the careful selection of design or operational parameters,such as average bed-material size and fluidization velocity,the pure-oxygen combustion CFB system can maintain the ideal fluidization state,namely significant internal and external particle circulation.Besides,the contraction section of the boiler leads to the particle backflow in the lower furnace,resulting in the particle suspension concentration near the wall region being higher than that in the center region.Conversely,the upper furnace still retains the classic core-annulus flow structure.In addition to increasing solid circulation rate by reducing the average bed-material size,altering primary gas ratio and bed inventory can also exert varying degrees of influence on the gas-solid flow characteristics of the pure-oxygen combustion CFB boiler.
基金supported by the China Postdoctoral Science Foundation(2020M681503)Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering(2021-K56).
文摘As an industrial solid waste,pyrite cinder exhibited excellent reactivity and cycle stability in chemical looping combustion.Prior to the experiment,oxygen carriers often experienced a high temperature calcination process to stabilize the physico-chemical properties,which presented significant influence on the redox performance of oxygen carriers.However,the effect of calcination temperature on the cyclic reaction performance of pyrite cinder has not been studied in detail.In this work,the effect of calcination temperature on the redox activity and attrition characteristic of pyrite cinder were studied in a fluidizedbed reactor using CH_(4) as fuel.A series of pyrite cinder samples were prepared by controlling the calcination temperature.The redox activity and attrition rate of the obtained pyrite cinder samples were investigated deeply.The results showed that calcination temperature displayed significant impact on the redox performance of pyrite cinder.Considering CH_(4) conversion(80%–85%)and attrition resistance,the pyrite cinder calcined at 1050℃ presented excellent redox properties.In the whole experiment process,the CO_(2) selectivity of the pyrite cinder samples were not affected by the calcination temperature and were still close to 100%.The results can provide reference for optimizing the calcination temperature of pyrite cinder during chemical looping process.
基金The financial supports from the Natural Sciences and Engineering Research Council of Canada(NSERC)to our CO_(2) Capture Research programs at the University of Regina,are gratefully acknowledgedIn addition,this publication was made possible,in parts,by NPRP grant#7-1154-2-433 from the Qatar Na tional Research Fund(a member of Qatar Foundation)+1 种基金The statements made herein are solely the responsibility of the au thorsThe authors also gratefully thank Clean Energy Technologies Research Institute(CETRI)of University of Regina-CANADA,Gas Processing Centre of Qatar University-QATAR,as well as the Petroleum and Petrochemical College of Chulalongkorn University-THAILAND,for their research facility supports.
文摘Chemical absorption using amine-based solvents have proven to be the most studied,as well as the most reliable and efficient technology for capturing carbon dioxide(CO_(2))from exhaust gas streams and synthesis gas in all combustion and industrial processes.The application of single amine-based solvents especially the very reactive monoethanolamine(MEA)is associated with a parasitic energy demand for solvent regeneration.Since regeneration energy accounts for up to threeequarters of the plant operating cost,efforts in its reduction have prompted the idea of using blended amine solvents.This review paper highlights the success achieved in blending amine solvents and the recent and future technologies aimed at increasing the overall volumetric mass transfer coefficient,absorption rate,cyclic capacity and greatly minimizing both degradation and the energy for solvent regeneration.The importance of amine biodegradability(BOD)and low ecotoxicity as well as low amine volatility is also highlighted.Costs and energy penalty indices that influences the capital and operating costs of CO_(2) capture process was also highlighted.A new experimental method for simultaneously estimating amine cost,degradation rate,regeneration energy and reclaiming energy is also proposed in this review paper.
