Influence of Harvest Periods on Cassava (Manihot esculenta Crantz) Agronomic Traits and Physiological Response to Post-Harvest Physiological Deterioration

Cassava (Manihot esculenta Crantz) is the third largest source of calories in tropical countries and the sixth most important food crop in the World. However, the short shelf life of its storage roots after harvest due to a rapid post-harvest physiological deterioration (PPD) makes the roots to be considered as a risky product to market. The objectives of this work were to investigate the influence of two harvest periods on cassava agronomic parameters and their physiological response to PPD. Three cassava cultivars 96/1414, I070593 and LMR were selected for the experiment and harvested at 10 and 12 months after planting (MAP). The response to PPD was assessed during storage at 0, 3, 8 and 15 days after harvest (DAH). Total proteins content, soluble sugars and starch, total polyphenols compounds, polyphenoloxidase and peroxidase activities were recorded during storage. Results showed large variation among the parameters at the two harvest periods across the cultivars. High number of tubers was recorded in all the cultivars at 12 MAP and a significant increase in storage roots length was observed in 96/1414 and LMR from 10 MAP to 12 MAP (25 ± 5.1 to 41.3 ± 5.9 and 22.6 ± 3.3 to 27.9 ± 4.8) respectively. A reduction of about 49% of tubers weight was observed in I070593 from 10 to 12 MAP while an increase of about 36% and 11% were recorded in LMR and 96/1414 respectively. Tubers from I070593 showed less susceptibility to PPD when harvested at 10 MAP compared to those from LMR and 96/1414 where less susceptibility to PPD were recorded at 12 MAP. An increase in soluble sugars content, total proteins content and peroxidase activity subsequently to a decrease in starch content were recorded during storage from 8 to 15 days after harvest especially at 10 MAP in I070593 and at 12 MAP in LMR and 96/1414. High content of total phenolic compounds and less activity of polyphenol oxidase were correlated to PPD susceptibility. This work opens a new insight issue of the consideration of the appropriate harvest time of the cultivars as a tool to better control the onset of postharvest physiological deterioration.

Farmers’ Practices for the Orchard’s Maintenance and Post-Harvest Treatment of Cocoa in Infiltrated Classified and Unclassified Zone of Méagui (South-West, Côte d’Ivoire)

An important part of Ivorian cocoa production comes from infiltrated classified forests. The objective of this study is to investigate orchard maintenance and post-harvest cocoa treatment practices used by cocoa farmers in infiltrated classified and unclassified areas of Méagui. To do this, 110 producers in two localities of the said zone were individually interviewed from February to April 2022, using a declarative questionnaire. It was found that cocoa orchards in the zone are aging. Nearly 68.55% of producers were heirs and 58.33% of those interviewed were under 46 years of age, with an average age of 43 years. Nearly 84.55% of the producers surveyed mainly use chemical insecticides to control the pests of greatest concern in these localities. Regarding the frequency of insecticide treatments, 11.82% of producers make 1 to 2 applications a year, 29.09% make 3 to 5 applications a year, and 43.64% make at least 6 applications a year. The active substances of the most used products belong to 99% of the Neonicotinoid and Pyrethroid families. Regarding cocoa harvesting and post-harvest operations, 93.64% of the producers carry out a single harvest/month;all do the shelling with mini machetes. Beans are fermented mainly in black plastic tarpaulins or in bags, for a period of 3 to 5 days (65.45%). Drying is done almost entirely (91.82%) on the black plastic tarp. This study shows that cocoa farmers in the areas surveyed do not respect the recommendations issued on phytosanitary practices and post-harvest treatment of cocoa. This non-compliance with the standards of good practices prescribed is particularly more accentuated in the locality located in infiltrated classified zone. It would, therefore, be judicious to revise or redefine the phytosanitary recommendations and carry out sensitization and training-follow-up programs for producers in this important cocoa production area of C?te d’Ivoire.

Farmers’ Practices for the Orchard’s Maintenance and Post-Harvest Treatment of Cocoa in Infiltrated Classified and Unclassified Zone of Méagui (South-West, Côte d’Ivoire)

An important part of Ivorian cocoa production comes from infiltrated classified forests. The objective of this study is to investigate orchard maintenance and post-harvest cocoa treatment practices used by cocoa farmers in infiltrated classified and unclassified areas of Méagui. To do this, 110 producers in two localities of the said zone were individually interviewed from February to April 2022, using a declarative questionnaire. It was found that cocoa orchards in the zone are aging. Nearly 68.55% of producers were heirs and 58.33% of those interviewed were under 46 years of age, with an average age of 43 years. Nearly 84.55% of the producers surveyed mainly use chemical insecticides to control the pests of greatest concern in these localities. Regarding the frequency of insecticide treatments, 11.82% of producers make 1 to 2 applications a year, 29.09% make 3 to 5 applications a year, and 43.64% make at least 6 applications a year. The active substances of the most used products belong to 99% of the Neonicotinoid and Pyrethroid families. Regarding cocoa harvesting and post-harvest operations, 93.64% of the producers carry out a single harvest/month;all do the shelling with mini machetes. Beans are fermented mainly in black plastic tarpaulins or in bags, for a period of 3 to 5 days (65.45%). Drying is done almost entirely (91.82%) on the black plastic tarp. This study shows that cocoa farmers in the areas surveyed do not respect the recommendations issued on phytosanitary practices and post-harvest treatment of cocoa. This non-compliance with the standards of good practices prescribed is particularly more accentuated in the locality located in infiltrated classified zone. It would, therefore, be judicious to revise or redefine the phytosanitary recommendations and carry out sensitization and training-follow-up programs for producers in this important cocoa production area of C?te d’Ivoire.

The underlying mechanism of variety–water–nitrogen–stubble damage interactions on yield formation in ratoon rice with low stubble height under mechanized harvesting

Agronomic measures are the key to promote the sustainable development of ratoon rice by reducing the damage from mechanical crushing to the residual stubble of the main crop, thereby mitigating the impact on axillary bud sprouting and yield formation in ratoon rice. This study used widely recommended conventional rice Jiafuzhan and hybrid rice Yongyou 2640 as the test materials to conduct a four-factor block design field experiment in a greenhouse of the experimental farm of Fujian Agricultural and Forestry University, China from 2018 to 2019.The treatments included fertilization and no fertilization, alternate wetting and drying irrigation and continuous water flooding irrigation, and plots with and without artificial crushing damage on the rice stubble. At the same time, a 13C stable isotope in-situ detection technology was used to fertilize the pot experiment. The results showed significant interactions among varieties, water management, nitrogen application and stubble status.Relative to the long-term water flooding treatment, the treatment with sequential application of nitrogen fertilizer coupled with moderate field drought for root-vigor and tiller promotion before and after harvesting of the main crop, significantly improved the effective tillers from low position nodes. This in turn increased the effective panicles per plant and grains per panicle by reducing the influence of artificial crushing damage on rice stubble and achieving a high yield of the regenerated rice. Furthermore, the partitioning of 13C assimilates to the residual stubble and its axillary buds were significantly improved at the mature stage of the main crop, while the translocation rate to roots and rhizosphere soil was reduced at the later growth stage of ratooning season rice. This was triggered by the metabolism of hormones and polyamines at the stem base regulated by the interaction of water and fertilizer at this time. We therefore suggest that to achieve a high yield of ratoon rice with low stubble height under mechanized harvesting, the timely application of nitrogen fertilizer is fundamental,coupled with moderate field drying for root-vigor preservation and tiller promotion before and after the mechanical harvesting of the main crop.

Postharvest Variations of Rice Physicochemical Traits and Volatile Compounds under Granary Conditions During Long-Time Storage

Rice quality is influenced by many factors,viz.,temperature,humidity,atmosphere and storage time.To uncover quality variations of rice after postharvest,we estimated the physicochemical properties and volatile compounds of an indica rice Zhongzheyou 8 under granary conditions(20ºC-25ºC in summer and 10ºC-15ºC in other seasons)for three years.

Highly Flexible Graphene-Film-Based Rectenna for Wireless Energy Harvesting

Herein,we report the design,fabrication,and performance of two wireless energy harvesting devices based on highly flexible graphene macroscopic films(FGMFs).We first demonstrate that benefiting from the high conductivity of up to 1×10^(6)S m^(-1)and good resistive stability of FGMFs even under extensive bending,the FGMFs-based rectifying circuit(GRC)exhibits good flexibility and RF-to-DC efficiency of 53%at 2.1 GHz.Moreover,we further expand the application of FGMFs to a flexible wideband monopole rectenna and a 2.45 GHz wearable rectenna for harvesting wireless energy.The wideband rectenna at various bending conditions produces a maximum conversion efficiency of 52%,46%,and 44%at the 5th Generation(5G)2.1 GHz,Industrial Long-Term Evolution(LTE)2.3 GHz,and Scientific Medical(ISM)2.45 GHz,respectively.A 2.45 GHz GRC is optimized and integrated with an AMC-backed wearable antenna.The proposed 2.45 GHz wearable rectenna shows a maximum conversion efficiency of 55.7%.All the results indicate that the highly flexible graphene-film-based rectennas have great potential as a wireless power supplier for smart Internet of Things(loT)applications.

Deployment optimization for target perpetual coverage in energy harvesting wireless sensor network

Energy limitation of traditional Wireless Sensor Networks(WSNs)greatly confines the network lifetime due to generating and processing massive sensing data with a limited battery.The energy harvesting WSN is a novel network architecture to address the limitation of traditional WSN.However,existing coverage and deployment schemes neglect the environmental correlation of sensor nodes and external energy with respect to physical space.Comprehensively considering the spatial correlation of the environment and the uneven distribution of energy in energy harvesting WSN,we investigate how to deploy a collection of sensor nodes to save the deployment cost while ensuring the target perpetual coverage.The Confident Information Coverage(CIC)model is adopted to formulate the CIC Minimum Deployment Cost Target Perpetual Coverage(CICMTP)problem to minimize the deployed sensor nodes.As the CICMTP is NP-hard,we devise two approximation algorithms named Local Greedy Threshold Algorithm based on CIC(LGTA-CIC)and Overall Greedy Search Algorithm based on CIC(OGSA-CIC).The LGTA-CIC has a low time complexity and the OGSA-CIC has a better approximation rate.Extensive simulation results demonstrate that the OGSA-CIC is able to achieve lower deployment cost and the performance of the proposed algorithms outperforms GRNP,TPNP and EENP algorithms.

Dewatering of Scenedesmus obliquus Cultivation Substrate with Microfiltration:Potential and Challenges for Water Reuse and Effective Harvesting

In the microalgae harvesting process,which includes a step for dewatering the algal suspension,directly reusing extracted water in situ would decrease the freshwater footprint of cultivation systems.Among various algae harvesting techniques,membrane-based filtration has shown numerous advantages.This study evaluated the reuse of permeate streams derived from Scenedesmus obliquus(S.obliquus)biomass filtration under bench-scale and pilot-scale conditions.In particular,this study identified a series of challenges and mechanisms that influence the water reuse potential and the robustness of the membrane harvesting system.In a preliminary phase of this investigation,the health status of the initial biomass was found to have important implications for the harvesting performance and quality of the permeate stream to be reused;healthy biomass ensured better dewatering performance(i.e.,higher water fluxes)and higher quality of the permeate water streams.A series of bench-scale filtration experiments with different combinations of cross-flow velocity and pressure values were performed to identify the operative conditions that would maximize water productivity.The selected conditions,2.4 m·s^(-1)and 1.4 bar(1 bar=105 Pa),respectively,were then applied to drive pilot-scale microfiltration tests to reuse the collected permeate as a new cultivation medium for S.obliquus growth in a pilot-scale photobioreactor.The investigation revealed key differences between the behavior of the membrane systems at the two scales(bench and pilot).It indicated the potential for beneficial reuse of the permeate stream as the pilot-scale experiments ensured high harvesting performance and growth rates of biomass in permeate water that were highly similar to those recorded in the ideal cultivation medium.Finally,different nutrient reintegration protocols were investigated,revealing that both macro-and micro-nutrient levels are critical for the success of the reuse approach.

Assessment of BRRI Whole Feed Combine Harvester (Model BRRI WCH2021) for Mechanized Rice Harvesting in Bangladesh

Agricultural mechanization plays a pivotal role in the transition from subsistence to commercial agriculture, with a particular focus on labour-intensive activities like harvesting. This study assesses the operational characteristics of the BRRI Whole Feed Combine Harvester (Model BRRI WCH2021) at the field level. Developed under the SFMRA project, the harvester’s technical performance and loss assessment were conducted during the Boro 2022 and Aman 2022 seasons in farmer fields in Bangladesh’s Rangpur region. The field efficiency of the harvester was determined to be 62.5% and 57.9% in the Boro and Aman seasons, respectively. Fuel consumption rates were recorded at 2.77 l/ha and 2.31 l/ha for the Boro and Aman seasons. The total harvesting losses, encompassing cutter bar, shatter, cylinder, and separation loss, averaged 0.56% and 0.48% in the Boro and Aman seasons, respectively. Mechanized harvesting with the BRRI Whole Feed Combine Harvester significantly reduced paddy losses by 5.81% compared to manual methods. The field evaluation results indicate the combine harvester’s satisfactory performance, highlighting its potential to alleviate labour demands during peak harvesting. The development of the BRRI WCH offers a sustainable solution for rice harvesting mechanization among progressive farmers. It paves the way for the broader adoption of advanced agricultural technology in Bangladesh.

Feasibility of Integrating Leprosy Post-Exposure Prophylaxis with Single-Dose Rifampicin (LPEP) into Routine Leprosy Control Program in Bukedi and Teso Regions in Uganda

Background: World Health Organization recommends the implementation of contact tracing and Leprosy Post Exposure prophylaxis (LPEP) to interrupt the chain of transmission. To accelerate the uptake of this recommendation, a cross-sectional study among contacts of leprosy patients was conducted to investigate the feasibility of integrating leprosy systematic contact tracing and post-exposure prophylaxis (PEP) into the routine leprosy control program. Methods: This was a mixed methods cross-sectional study. The study was implemented in Kumi, Ngora, Serere, Soroti, Budaka and Kibuku Districts. Results: The 45 enrolled index patients (97.8% of the registered) identified a total of 135 contacts, of which 134 (99·2%) consented and were screened. Among them, one new leprosy patient was identified and started on treatment with multidrug therapy (MDT). All the eligible contacts, received the prophylactic treatment with Single Dose Rifampicin (SDR). Overall, SDR was administered to 133(98.5% of the listed contacts) with no adverse event reported. Factors associated with successful contact investigation and management included: Involvement of index patients, health care workers during the contact screening and SDR A administration, counselling of the index patients and contacts by the health care works, LPEP being administered as Directly observed Therapy (DOT) among others. Results Interpretation: The integration of leprosy post-exposure prophylaxis with administration of SDR and contact tracing is feasible, generally accepted by the patient, their contacts and health workers and can be integrated into the National Leprosy control programmes with minimal additional efforts once contact tracing has been established. Therefore, we recommend integration of administration of SDR in to the routine leprosy control program.

Dynamic analysis of a novel multilink-spring mechanism for vibration isolation and energy harvesting

Due to technical limitations,existing vibration isolation and energy harvesting(VIEH)devices have poor performance at low frequency.This paper proposes a new multilink-spring mechanism(MLSM)that can be used to solve this problem.The VIEH performance of the MLSM under harmonic excitation and Gaussian white noise was analyzed.It was found that the MLSM has good vibration isolation performance for low-frequency isolation and the frequency band can be widened by adjusting parameters to achieve a higher energy harvesting power.By comparison with two special cases,the results show that the MLSM is basically the same as the other two oscillators in terms of vibration isolation but has better energy harvesting performance under multistable characteristics.The MLSM is expected to reduce the impact of vibration on high-precision sensitive equipment in some special sites such as subways and mines,and at the same time supply power to structural health monitoring devices.

Review of the Tuned Mass Damper Inerter(TMDI)in Energy Harvesting and Vibration Control:Designs,Analysis and Applications

Tuned mass damper inerter(TMDI)is a device that couples traditional tuned mass dampers(TMD)with an inertial device.The inertial device produces resistance proportional to the relative acceleration at its two ends through its“inertial”constant.Due to its unique mechanical properties,TMDI has received widespread attention and application in the past twenty years.As different configurations are required in different practical situations,TMDI is still active in the research on vibration control and energy harvesting in structures.This paper provides a comprehensive review of the research status of TMDI.This work first examines the generation and important vibration control characteristics of TMDI.Then,the energy harvesting performance of electromagnetic tuned mass damper inerter(EM-TMDI)is discussed.This work emphasizes the formation of a passive dynamic vibration absorber by coupling traditional TMD with inertial devices.This paper also summarizes the design and implementation of optimal vibration control and energy harvesting for TMDI.Furthermore,this paper details the applications of TMDI in the fields of bridges and building engineering.Finally,this paper summarizes the necessity of research on tuned mass-damper-inertia,the challenges faced currently,and future research directions,such as control of parameters in electromagnetic energy harvesting TMDI systems and low-cost TMDI.

Energy Harvesting in the Wake of An Inverted C-Shaped Bluff Body

This paper proposes a novel wake-induced vibration(WIV)-based energy harvesting system consisting of two bluff bodies.An inverted C-shaped bluff body is stationary installed at the upstream position to generate an interference wake street,and a cylinder bluff body equipped with a transducer is elastically suspended at the downstream position to harness WIV energy.The hydrodynamics and energy harvesting(EH)performance of the proposed system are investigated via experimental studies.The reduced velocity(U*)ranging from 2 to 14(the corresponding Reynolds number ranging from 15100 to 106200)is considered in the present study.It is found that the wake generated by the inverted C-shaped bluff body significantly affects the EH performance.Enlarging the opening angle(α)of the C-shaped bluff body increases the vibration amplitude of the downstream cylinder,thereby increasing the harvested power.When the spacing(L)between two bluff bodies is two times the cylinder diameter(D),the wake-induced vibration(WIV)mode is observed,while the combined WIV and wake galloping(WG)mode occurs whenαis 150°,and L equals 3D or 4D.The average drag coefficient becomes negative when L is 2D,3D,or 4D.By carefully configuring a C-shaped bluff body,the wake generated by it can bring an augmenting effect on the vibration of the downstream EH cylinder.For example,the RMS power output of the proposed EH system reaches a maximum of 0.31 W at U*=8 and L=4D,which is 300%greater than that of its traditional counterpart.Furthermore,after a number of case stud-ies,it is identified that the proposed EH system can achieve the best performance whenαis 150°and L=2D.

A viscoelastic metamaterial beam for integrated vibration isolation and energy harvesting

Locally resonant metamaterials have low-frequency band gaps and the capability of converging vibratory energy in the band gaps at resonant cells.It has been demonstrated by several researchers that the dissipatioin of vibratory energy within the band gap can be improved by using viscoelastic materials.This paper designs an integrated viscoelastic metamaterial for energy harvesting and vibration isolation.The viscoelastic metamaterial is achieved by a viscoelastic beam periodically arrayed with spatial ball-pendulum nonlinear energy harvesters.The nonlinear resonator with an energy harvesting function is achieved by placing a free-rolling magnetic ball in a spherical cavity with an additional induction coil.The dynamic equations of viscoelastic metamaterials under transverse excitation are established,and the energy harvesting and vibration isolation characteristics within the dispersion relation of viscoelastic metamaterials are analyzed.The results show that the vibrations of the main body of the viscoelastic metamaterial beam are significantly suppressed in the frequency range of the local resonance band gap.At the same time,the elastic waves are limited in the nonlinear resonator with an energy harvesting function,which improves the energy output.Finally,an experimental platform of viscoelastic metamaterial vibration is established for validation purposes.

On the role of sliding friction effect in nonlinear tri-hybrid vibration-based energy harvesting

This work aims to develop an experimental investigation into the effectiveness of the sliding-mode approach for hybrid vibration-based energy harvesting.A proposed sliding-mode triboelectric-electromagnetic-piezoelectric energy harvesting model involves a cantilever beam with a tip mass exposed to magnetic and frictional forces.The experimental findings indicate that the system can achieve its peak inter-well oscillation output within a low-frequency range of 4 Hz–6 Hz.Friction has a lesser impact on the open-circuit voltage output at an excitation acceleration of 1.5g compared with 1g.The distribution of tri-stability changes with the presence of friction.This model provides a deeper understanding of the influence of the dry friction coefficient(0.2–0.5) on the interactive behaviors of different generator units.

Performance enhancement of a viscoelastic bistable energy harvester using time-delayed feedback control

This paper focuses on the stochastic analysis of a viscoelastic bistable energy harvesting system under colored noise and harmonic excitation, and adopts the time-delayed feedback control to improve its harvesting efficiency. Firstly, to obtain the dimensionless governing equation of the system, the original bistable system is approximated as a system without viscoelastic term by using the stochastic averaging method of energy envelope, and then is further decoupled to derive an equivalent system. The credibility of the proposed method is validated by contrasting the consistency between the numerical and the analytical results of the equivalent system under different noise conditions. The influence of system parameters on average output power is analyzed, and the control effect of the time-delayed feedback control on system performance is compared. The output performance of the system is improved with the occurrence of stochastic resonance(SR). Therefore, the signal-to-noise ratio expression for measuring SR is derived, and the dependence of its SR behavior on different parameters is explored.

Advances in Triboelectric Nanogenerators for Blue Energy Harvesting and Marine Environmental Monitoring

Blue energy,which includes rainfall,tidal current,wave,and water-flow energy,is a promising renewable resource,although its exploitation is limited by current technologies and thus remains low.This form of energy is mainly harvested by electromagnetic generators(EMGs),which generate electricity via Lorenz force-driven electron flows.Triboelectric nano genera tors(TENGs)and TENG networks exhibit superiority over EMGs in low-frequency and high-entropy energy harvesting as a new approach for blue energy harvesting.A TENG produces electrical outputs by adopting the mechanism of Maxwell’s displacement current.To date,a series of research efforts have been made to optimize the structure and performance of TENGs for effective blue energy harvesting and marine environmental applications.Despite the great progress that has been achieved in the use of TENGs in this context so far,continuous exploration is required in energy conversion,device durability,power management,and environmental applications.This review reports on advances in TENGs for blue energy harvesting and marine environmental monitoring.It introduces the theoretical foundations of TENGs and discusses advanced TENG prototypes for blue energy harvesting,including TENG structures that function in freestanding and contact-separation modes.Performance enhancement strategies for TENGs intended for blue energy harvesting are also summarized.Finally,marine environmental applications of TENGs based on blue energy harvesting are discussed.

Harvesting Energy Via Water Movement and Surface Ionics in Microfibrous Ceramic Wools

Due to the push for carbon neutrality in various human activities,the development of methods for producing electricity without relying on chemical reaction processes or heat sources has become highly significant.Also,the challenge lies in achieving microwatt-scale outputs due to the inherent conductivity of the materials and diverting electric currents.To address this challenge,our research has concentrated on utilizing nonconductive mediums for water-based low-cost microfibrous ceramic wools in conjunction with a NaCl aqueous solution for power generation.The main source of electricity originates from the directed movement of water molecules and surface ions through densely packed microfibrous ceramic wools due to the effect of dynamic electric double layer.This occurrence bears resemblance to the natural water transpiration in plants,thereby presenting a fresh and straightforward approach for producing electricity in an ecofriendly manner.The generator module demonstrated in this study,measuring 12×6 cm^(2),exhibited a noteworthy open-circuit voltage of 0.35 V,coupled with a short-circuit current of 0.51 mA.Such low-cost ceramic wools are suitable for ubiquitous,permanent energy sources and hold potential for use as self-powered sensors and systems,eliminating the requirement for external energy sources such as sunlight or heat.

A viscoelastic nonlinear energy sink with an electromagnetic energy harvester:Narrow-band random response

Nonlinear energy sink is a passive energy absorption device that surpasses linear dampers, and has gained significant attention in various fields of vibration suppression. This is owing to its capacity to offer high vibration attenuation and robustness across a wide frequency spectrum. Energy harvester is a device employed to convert kinetic energy into usable electric energy. In this paper, we propose an electromagnetic energy harvester enhanced viscoelastic nonlinear energy sink(VNES) to achieve passive vibration suppression and energy harvesting simultaneously. A critical departure from prior studies is the investigation of the stochastic P-bifurcation of the electromechanically coupled VNES system under narrowband random excitation. Initially, approximate analytical solutions are derived using a combination of a multiple-scale method and a perturbation approach. The substantial agreement between theoretical analysis solutions and numerical solutions obtained from Monte Carlo simulation underscores the method's high degree of validity. Furthermore, the effects of system parameters on system responses are carefully examined. Additionally, we demonstrate that stochastic P-bifurcation can be induced by system parameters, which is further verified by the steady-state density functions of displacement. Lastly,we analyze the impacts of various parameters on the mean square current and the mean output power, which are crucial for selecting suitable parameters to enhance the energy harvesting performance.

Bidirectional rotating direct-current triboelectric nanogenerator with self-adaptive mechanical switching for harvesting reciprocating motion

Amid the growing interest in triboelectric nanogenerators(TENGs)as novel energy-harvesting devices,several studies have focused on direct current(DC)TENGs to generate a stable DC output for operating electronic devices.However,owing to the working mechanisms of conventional DC TENGs,generating a stable DC output from reciprocating motion remains a challenge.Accordingly,we propose a bidirectional rotating DC TENG(BiR-TENG),which can generate DC outputs,regardless of the direction of rotation,from reciprocating motions.The distinct design of the BiR-TENG enables the mechanical rectification of the alternating current output into a rotational-direction-dependent DC output.Furthermore,it allows the conversion of the rotational-direction-dependent DC output into a unidirectional DC output by adapting the configurations depending on the rotational direction.Owing to these tailored design strategies and subsequent optimizations,the BiR-TENG could generate an effective unidirectional DC output.Applications of the BiR-TENG for the reciprocating motions of swinging doors and waves were demonstrated by harnessing this output.This study demonstrates the potential of the BiR-TENG design strategy as an effective and versatile solution for energy harvesting from reciprocating motions,highlighting the suitability of DC outputs as an energy source for electronic devices.