Reversed-Phase-HPLC Assay Method for Simultaneous Estimation of Sorbitol, Sodium Lactate, and Sodium Chlorides in Pharmaceutical Formulations and Drug Solution for Infusion

A rapid, straightforward, sensitive, efficient, and cost-effective reverse-phase high-performance liquid chromatographic method was employed for the simultaneous determination of Sorbitol, Sodium Lactate, and Chlorides in a drug solution for infusion. Sorbitol, Sodium lactate, and Chloride are all officially recognized in the USP monograph. Assay methods are provided through various techniques, with titrations being ineffective for trace-level quantification. Alternatively, IC, AAS, and ICP-MS, though highly accurate, are costly and often unavailable to most testing facilities. When considering methods, it’s important to prioritize both quality control requirements and user-friendly techniques. A simple HPLC simultaneous method was developed for the quantification of Chlorides, Sorbitol, and Sodium Lactate with a shorter run time. The separation utilized a Shimpack SCR-102(H) ion exclusion analytical column (7.9 mm × 300 mm, 7 μm), with a flow rate of 0.6 mL per min. The column compartment temperature was maintained at 40°C, and the injection volume was set at 10 μL, with detection at 200 nm. All measurements were conducted in a 0.1% solution of phosphoric acid. The analytical curves demonstrated linearity (r > 0.9999) in the concentration range of 0.79 to 3.8 mg per mL for Sodium Lactate (SL), 0.16 to 0.79 mg per mL for Sodium Chloride (SC), and 1.5 to 7.2 mg per mL for Sorbitol. Validation of the developed method followed the guidelines of the International Conference on Harmonization (ICH Q2B) and USP. The method exhibited precision, robustness, accuracy, and selectivity. In accelerated stability testing over 6 months, no significant variations were observed in organoleptic analysis and pH. Consequently, the developed method is deemed suitable for routine quality control analyses, enabling the simultaneous determination of Sodium Lactate, Sodium Chloride, and Sorbitol in pharmaceutical formulations and infusions.

Delving into the dissimilarities in electrochemical performance and underlying mechanisms for sodium and potassium ion storage in N-doped carbon-encapsulated metallic Cu_(2)Se nanocubes

The large volumetric variations experienced by metal selenides within conversion reaction result in inferior rate capability and cycling stability,ultimately hindering the achievement of superior electrochemical performance.Herein,metallic Cu_(2)Se encapsulated with N-doped carbon(Cu_(2)Se@NC)was prepared using Cu_(2)O nanocubes as templates through a combination of dopamine polymerization and hightemperature selenization.The unique nanocubic structure and uniform N-doped carbon coating could shorten the ion transport distance,accelerate electron/charge diffusion,and suppress volume variation,ultimately ensuring Cu_(2)Se@NC with excellent electrochemical performance in sodium ion batteries(SIBs)and potassium ion batteries(PIBs).The composite exhibited excellent rate performance(187.7 mA h g^(-1)at 50 A g^(-1)in SIBs and 179.4 mA h g^(-1)at 5 A g^(-1)in PIBs)and cyclic stability(246,8 mA h g^(-1)at 10 A g^(-1)in SIBs over 2500 cycles).The reaction mechanism of intercalation combined with conversion in both SIBs and PIBs was disclosed by in situ X-ray diffraction(XRD)and ex situ transmission electron microscope(TEM).In particular,the final products in PIBs of K_(2)Se and K_(2)Se_(3)species were determined after discharging,which is different from that in SIBs with the final species of Na_(2)Se.The density functional theory calculation showed that carbon induces strong coupling and charge interactions with Cu_(2)Se,leading to the introduction of built-in electric field on heterojunction to improve electron mobility.Significantly,the theoretical calculations discovered that the underlying cause for the relatively superior rate capability in SIBs to that in PIBs is the agile Na~+diffusion with low energy barrier and moderate adsorption energy.These findings offer theoretical support for in-depth understanding of the performance differences of Cu-based materials in different ion storage systems.

Analgesic effect of intrathecal bumetanide is accompanied by changes in spinal sodium-potassium-chloride co-transporter 1 and potassium-chloride co-transporter 2 expression in a rat model of incisional pain

Accumulating evidence has demonstrated that the sodium-potassium-chloride co-transporter 1 and potassium-chloride co-transporter 2 have a role in the modulation of pain transmission at the spinal level through chloride regulation in the pain pathway and by effecting neuronal excitability and pain sensitization. The present study aimed to investigate the analgesic effect of the speciifc sodium-potassium-chloride co-transporter 1 inhibitor bumetanide, and the change in spinal sodium-potassium-chloride co-transporter 1 and potassium-chloride co-transporter 2 expression in a rat model of incisional pain. Results showed that intrathecal bumetanide could decrease cumulative pain scores, and could increase thermal and mechanical pain thresholds in a rat model of incisional pain. Sodium-potassium-chloride co-transporter 1 expression in-creased in neurons from dorsal root ganglion and the deep laminae of the ipsilateral dorsal horn following incision. By contrast, potassium-chloride co-transporter 2 expression decreased in neurons of the deep laminae from the ipsilateral dorsal horn. These ifndings suggest that spinal sodium-potassium-chloride co-transporter 1 expression was up-regulated and spinal potassi-um-chloride co-transporter 2 expression was down-regulated following incision. Intrathecal bumetanide has analgesic effects on incisional pain through inhibition of sodium-potassi-um-chloride co-transporter 1.

Effectiveness of Sodium Silicate on the Corrosion Protection of AA7075-T6 Aluminium Alloy in Sodium Chloride Solution

The influence of sodium silicate on the corrosion behaviour of aluminium alloy 7075-T6 in 0.1 M sodium chloride solution was studied by open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) techniques. Scanning electron microscopy (SEM) was used to characterize the AA7075-T6 surface. Silicate can significantly reduce corrosion deterioration and the inhibition efficiency increases with the concentration of Na2SiO3. The corrosion inhibition mechanism involves the formation of a protective film over the alloy surface by adsorption of aluminosilicate anions from solution, as has also been suggested by others in literature.

Existing state of potassium chloride in agglomerated sintering dust and its water leaching kinetics

In order to examine the leaching rate of potassium chloride from the sintering dust by water,surface morphology and inner structure of the dust,especially the existing state of potassium chloride,were observed by scanning electron microscopy（SEM） and linear scanning technique via energy dispersive spectroscopy（EDS）.The characterization shows that the sintering dusts are mostly porous composites or agglomerates of the fine dust particles with size less than 10 μm,and the potassium chloride and sodium chloride particles are partly covered by other water insoluble matters in the dust which consist of elements iron,calcium and etc.Exposure of potassium chloride in the agglomerated dust matrix of this kind suggests that the leaching can be simply perceived as the dissolution of water soluble matters in the dust.On-line monitor of specific electrical conductivity of the leaching system verifies the prediction that leaching kinetics of potassium chloride from the sintering dust fits dissolution model well.Leaching equilibrium can be reached within 5 min with potassium leaching ratio more than 95%.

Effect of Berberine Chloride on Experimental Murine Colitis Induced by Dextran Sulfate Sodium

Aim To investigate the effect in berberine chloride （BER） on experimental ulcerative colitis in mice. Methods BALB/C mice in 6 groups were allowed to drink either 4% dextran sulfate sodium （DSS） solution or distilled water freely with different doses of BER （15 mg·kg^-1, 45 mg·kg^-1, 150 mg·kg^-1） or sallcylazosulfapyridine （SASP, 520 mg·kg^-1）, and solvent （0. 2 mL/10 mg Wt） once a day for 7 d, respectively. The symptom of ulcerative colitis was evaluated by disease activity index （DAI）. Myeloperoxidase （MPO） and superoxide dismutase （SOD） activities and malondialdehyde （MDA） content were determined by HE staining and immunohistochemistry of expressions of NF-κB p65 and intercellular adhesion molecule 1 （ ICAM-1 ） proteins to observe the damage to colon tissues and possible mechanisms. Results DAI, MPO activity, MDA content and expressions of ICAM-1 and NF-κB p65 were markedly increased, while SOD activity decreased in DSS-treated mice. Treatment of mice with different doses of BER or SASP significantly decreased DAI, MPO activity and MDA content, improved histological changes of colon tissues, blunted the expressions of NF-κB p65 and ICAM-1 proteins, and enhanced SOD activity. Conclusion Berberine chloride has excellent therapeutic effect on ulcerative colitis caused by DSS in mice. The possible mechanism may be related to its antioxidant and anti-inflammatory activities associated with inhibiting the NF-κB activation and ICAM-1 expression.

Effect of Interaction of Potassium, Calcium and Sodium on Cabbage Growth and Nutrient Absorption

ObjectiveThis study aimed to investigate the effect of the interactions among potassium （K）, calcium （Ca） and sodium （Na） on cabbage growth and nutrient absorption. MethodA total of 11 treatments with different levels of K, Ca and Na were set in the pot experiment to measure the nutrient content and uptake in cabbage plants. ResultThe use of K or the combined use of K and Ca improved the cabbage absorption on K and Ca. In addition, K and Ca presented an interaction as that appropriate amount of Ca promoted K uptake while excessive Ca inhibited the uptake. The treatment of Ca 2 K 3 with 0.33 g/pot of Ca and 0.67 g/pot of K could significantly increase the quantity of dry matter accumulation and absorption of Ca and K in cabbage, was the best among all treatments. ConclusionApplication of suitable amount of Ca could release the Na stress on cabbage growth at the low level of Na in soil.

Effects of Paper Mill Sludge on Potassium, Sodium, Calcium, and Magnesium Concentrations in Different Soybean Cultivars

A field experiment was conducted on a sandy loam soil at an Experimental Farm in Taejon, South Korea, to determine the effects of paper mill sludge compost application rates on K, Na, Ca and Mg concentrations of soybean (Glycine max (L.) Merr.) aboveground tissues and the genotypic effects on the concentrations of these elements. Sludge compost treatments of 0, 75, and 150 t ha-1 were applied to 30 diverse soybean cultivars. Concentrations of K, Na, Ca, and Mg in aboveground tissues harvested 69 days after …

Baeyer-Villiger oxidation of cyclic ketones utilizing potassium peroxydisulfate(K_2S_2O_8) or sodium perborate(NaBO_3) in acidic media

The efficient, green, facile, mild and straightforward conversion procedure for the oxidation of cyclic ketones to lactones at room temperature utilizing potassium peroxydisulfate （K2S2O8） in acidic media is satisfactory to high yields without using traditional chlorinated solvents is reported. This oxidative reagent is cheap and friendly environmental procedure for industrial purposes than use of organic peracids.

Manifestations in Corrosion Prophase of Ultra-high Strength Steel 30CrMnSiNi2 A in Sodium Chloride Solutions

The corrosion behaviors of ultra-high strength steel 30CrMnSiNi2A in sodium chloride solution were studied by weight loss and electrochemical methods. The morphology of corrosion products was observed using scanning electron microscopy（SEM） and the composition was analyzed using an energy dispersive spectroscopy（EDS） and X-Ray diffraction （XRD）. The experimental results showed that the corrosion came from pitting corrosion and the rust layer was composed of outer rust layer γ-FeOOH and inner rust layer Fe_2O_3 with a little β-FeOOH. The correlation between corrosion rate and test time accorded with exponential rule. The corrosion current measured by polarization methods was higher than that calculated by weight loss method after a long-time immersion, the main reason was that,β-FeOOH and γ-Fe_2O_3 transformed by γ-FeOOH led to overestimating corrosion rate. The processes of corrosion prophase were obtained from XRD and EIS results. The corrosion product, Fe（OH）_2 formed at the initial stage stayed at a non-steady state and then consequently transferred to γ-FeOOH, γ-Fe_2O_3 or β-FeOOH.

Changes of protein oxidation,lipid oxidation and lipolysis in Chinese dry sausage with different sodium chloride curing salt content

The effect of sodium chloride(NaCl)curing salt content on protein oxidation,lipid oxidation and lipolysis of Chinese dry sausage was investigated.Two groups Chinese dry sausages with 2%and 4%(m/m)salt content were studied.The degree of protein oxidation increased during the processes in two groups sausages,while the content of phospholipids decreased,neutral lipids and free fatty acids increased.The degree of protein oxidation,lipid oxidation and lipolysis in 4%NaCl content group was higher than those in 2%NaCl content group,while 4%NaCl content group has higher lipase activity.In conclusion,4%NaCl may facilitate the protein oxidation,lipid hydrolysis and oxidation in Chinese dry sausage,and the protein oxidation had strong correlation with lipid oxidation and lipolysis.The results could provide a basis for improving the technology of industrial production.

Associations between serum potassium and sodium levels and risk of hypertension： a community-based cohort study

Objective Several studies have examined the relationships between dietary potassium and sodium and hypertension, but few have evaluated the association between serum potassium or sodium and risk of incident hypertension. We therefore investigated the associations between serum potassium and sodium and risk of incident hypertension in a Chinese community-based population. Methods A total of 839 normotensive individuals without cardiovascular disease from the Chinese Multi-Provincial Cohort Study who took part in the baseline examination in 2007-2008 and the follow-up survey in 2012-2013 were included in this study. Odds ratios （OR） and 95% confidence intervals （95%CI） for baseline serum potassium and sodium in relation to the risk of new-onset hypertension were evaluated using multivari- ate logistic regression models. Results During five years of follow-up, 218 （26.0%） individuals progressed to hypertension. Logistic re- gression adjusting for multiple confounders showed that every 1 mEq/L increment in baseline serum potassium level was associated with a 75% increased risk of hypertension （OR： 1.75; 95%CI： 1.01-3.04; P = 0.04）. Compared with adults with serum potassium level of 4.20-4.79 mEq/L, adults with level 〉 4.80 mEq/L had an 84% increased risk of hypertension （OR： 1.84; 95%CI： 1.14-2.96; P = 0.01）. There was no significant association between serum sodium and risk of hypertension （OR： 0.96; 95%CI： 0.89-1.04; P = 0.33）. Conclusions Base- line serum potassium level, but not baseline serum sodium level, was positively related to the risk of incident hypertension in the Chinese population.

Adsorption of Potassium and Sodium Ions by Variable Charge Soils

Adsorption of potassium and sodium ions by four typical variable charge soils of South China was studied. The results indicated that the variable charge soils saturated with H and Al showed a much higher preference for potassium ions relative to sodium ions, and this tendency could not be changed by such factors as the pH, the concentration of the cations, the dielectric constant of solvent, the accompanying anions and the iron oxide content etc., suggesting that this difference in affinity is caused by the difference in the nature of the two cations. It was observed that a negative adsorption of sodium ions by latosol and lateritic red soil in a mixed system containing equal amount of potassium and sodium ions at low pH, which is caused by a competitive adsorption of potassium and sodium ions and repulsion of positive charge on the surfaces of soil particles for cations. The adsorption of potassium and sodium ions increased with the decreases in the dielectric constant of solvent and the iron oxide content. Sulfate affected the adsorption of potassium and sodium ions through changing the surface properties of the soils.

Effect of Sodium Chloride on Meltability of Mozzarella Cheese

Meltability is one of the most important properties of Mozzarella cheese, as it is generally used in pizza and other foods. Mozzarella was prepared by no salted and immature production technology, and the effect of different addition amounts of salt on the meltability of mozzarella cheese was measured by Schreiber method and small amplitude oscillatory shear analysis（SAOSA） method. The results showed that different adding amounts of NaCl had significant influence on the meltability of Mozzarella cheese, and 2% NaCl addition was the best condition. The results measured by the methods of Schreiber and SAOSA were basically same： adding different amounts of NaCl had significant influence on the hardness and elasticity of mozzarella cheese, but no significant influence on the sticky. It was a good microscopic structure arrangement of Mozzarella cheese with 2% NaCl addition. Scanning electron micrographs showed that a space grid structure formed by casein had changed, and formed many uniform molecular holes. The results indicated that different addition amounts of salt had influence on meltability of no salted immature Mozzarella cheese, and this technology could be drastically shorten the processing time.

Generation of sodium hypochlorite (NaOCl) from sodium chloride solution using C/PbO_2 and Pb/PbO_2 electrodes

Two modified electrodes （Pb/PbO2 and C/PbO2） were prepared by electrodepositing a lead oxide layer on lead and carbon sub- strates. These modified electrodes were used as anodes for the generation of sodium hypochlorite （NaOC1） from sodium chloride solution. Different operating conditions and factors affecting the treatment process of NaOC1 generation, including current density, pH values, con- ductive electrolytes, and electrolysis time, were studied and optimized. By comparison the C/PbO2 electrode shows a higher efficiency than the Pb/PbO2 electrode for the generation of NaOC1.

Enhanced extraction of scandium and inhibiting of iron from acid leaching solution of red mud by D2EHPA and sodium chloride

D2EHPA(P204),tri-butyl-phosphate(TBP)and sodium chloride(NaCl)were attractive for selective extraction of scandium from acid leaching solution of red mud.The extraction parameters of P204 concentration(X_(P204)),NaCl concentration(C_(NaCl)),pH value,reaction time,stirring speed and O/A were investigated to extract scandium and separate iron from the acid leaching solution.The extraction mechanism was analyzed by Fourier transform infrared spectroscopy(FT-IR)and thermodynamic theory.The single-stage extraction efficiency of scandium,iron andβ(Sc/Fe)were 99.1%,9.4%and 1061.2,respectively,with C_(NaCl) of 75 g/L and XP204 of 0.75 at solution pH value of 1.2 and stirring speed of 200 r/min for 6 min,in which a good separation effect of scandium and iron was obtained.The vibration absorption peak Sc─O was contributed to the extraction of scandium with P204.The complex[FeCln]^(3−n) existed in the solution with adding NaCl into the acid leaching solution.The value of n was higher and the valence state of the complex[FeCln]^(3−n) was lower with an increase of chloride concentration,which restricts the extraction efficiency of iron with P204.The extraction of three stages in the counter-current simulation experiments was carried out according to the McCabe-Thiele diagram.Gibbs free energy change(ΔG)of−5.93 kJ/mol,enthalpy change(ΔH)of 23.45 kJ/mol and entropy change(ΔH)of 98.54 J/(mol·K)were obtained in the solvent extraction proces,which indicate that the extraction reaction is easily spontaneous and endothermic and a proper increase of temperature is conducive to the extraction of scandium.

Sodiophilicity/potassiophilicity chemistry in sodium/potassium metal anodes

Heteroatom-doped carbon materials have been widely used as sodium(Na) and potassium(K) metal anode frameworks to achieve uniform Na and K depositions. If the origin of the Sodiophilicity and potassiophilicity of doping sites in heteroatom-doped carbon host are clearly understood, the nucleation and growth behavior of Na and K can be precisely regulated in working batteries. Herein the Sodiophilicity and potassiophilicity chemistries of carbon materials are probed through first-principles calculations. The local dipole of doping functional groups and charge transfer during Na/K deposition are regarded as key principles to reveal the sodiophilic and potassiophilic nature of doping sites. Especially, O–B, O–S, and O–P co-doping strategy are predicted to be effective methods to improve the Sodiophilicity and potassiophilicity of carbon hosts and thus render safe and dendrite-free Na and K metal anodes. This work affords a deep and insightful understanding of Sodiophilicity and potassiophilicity chemistry of Na and K anodes and establishes general principles of designing highly sodiophilic and potassiophilic carbon frameworks.

Effect of Sodium Chloride and Cadmium on the Growth, Oxidative Stress and Antioxidant Enzyme Activities of Zygosaccharomyces rouxii

Zygosaccharomyces rouxii is a salt-tolerant yeast species capable of removing cadmium(Cd) pollutant from aqueous solution. Presently, the physiological characteristics of Z. rouxii under the stress of sodium chloride(NaCl) and Cd are poorly understood. This study investigated the effects of NaCl and Cd on the growth, oxidative stress and antioxidant enzyme activities of Z. rouxii after stress treatment for 24 h. Results showed that NaCl or Cd alone negatively affected the growth of Z. rouxii, but the growth-inhibiting effect of Cd on Z. rouxii was reduced in the presence of NaCl. Flow cytometry assay showed that under Cd stress, NaCl significantly reduced the production of reactive oxygen species(ROS) and cell death of Z. rouxii compared with those in the absence of NaCl. The activities of superoxide dismutase(SOD), catalase(CAT), and peroxidase(POD) of Z. rouxii were significantly enhanced by 2%–6% NaCl, which likely contributed to the high salt tolerance of Z. rouxii. The POD activity was inhibited by 20 mg L-1Cd while the SOD and CAT activities were enhanced by 8 mg L-1 Cd and inhibited by 20 mg L-1 or 50 mg L-1 Cd. The inhibitory effect of high-level Cd on the antioxidant enzyme activities of Z. rouxii was counteracted by the combined use of NaCl, especially at 6%. This probably accounted for the decrease in Cd-induced ROS production and cell death of Z. rouxii after incubation with NaCl and Cd. Our work provided physiological clues as to the use of Z. rouxii as a biosorbent for Cd removal from seawater and liquid highly salty food.

Reductive amination of aldehydes and ketones using sodium borohydride in the presence of silica chloride under solvent-free conditions

A simple and convenient procedure for the preparation of amines from aldehydes and ketones with sodium borohydride activated by silica chloride as a catalyst under solvent-free conditions is described.A variety of aliphatic and aromatic aldehydes,ketones and amines when mixed with NaBH;/silica chloride at room temperature,afforded excellent yield of the corresponding amines.

Conductivity Prediction of Sodium and Potassium Hydrogen Tartrates in Aqueous Solution at Low Concentration

An ionic conductivity prediction equation at low concentration for two acid salts is proposed taking into account the dissociation and association equilibria among ions. The salts considered are sodium and potassium hydrogen tartrates. There is no additional parameter of high order terms except for the Onsager's coefficient of limited term in the new equation. Results show a complex conductance of acidic tartrates in aqueous solution. The molar conductivities of metal ions are nearly constant such that the contributions from hydrogen and tartrate ions decrease with concentration, while the molar conductivity of bitartrate ion increases with concentration.