Effects of Potassium and Manganese Promoters on Nitrogen-Doped Carbon Nanotube-Supported Iron Catalysts for CO_2 Hydrogenation

Nitrogen-doped carbon nanotubes （NCNTs） were used as a support for iron （Fe） nanoparticles applied in car- bon dioxide （CO_2） hydrogenation at 633 K and 25 bar （1 bar = 10-5 Pa）. The Fe/NCNT catalyst promoted with both potassium （K） and manganese （Mn） showed high performance in CO_2 hydrogenation, reaching 34.9% conversion with a gas hourly space velocity （GHSV） of 3.1 L-（g·h）-1. Product selectivities were high for olefin products and low for short-chain alkanes for the K-promoted catalysts. When Fe/NCNT catalyst was promot- ed with both K and Mn, the catalytic activity was stable for 60 h of reaction time. The structural effect of the Mn promoter was demonstrated by X-ray diffraction （XRD）, temperature-programmed reduction （TPR） with molecular hydrogen （H2）, and in situ X-ray absorption near-edge structure （XANES） analysis. The Mn pro- moter stabilized wtistite （FeO） as an intermediate and lowered the TPR onset temperature. Catalytic ammo- nia （NH_3） decomposition was used as an additional probe reaction for characterizing the promoter effects. The Fe/NCNT catalyst promoted with both K and Mn had the highest catalytic activity, and the Mn-promoted Fe/NCNT catalysts had the highest thermal stability under reducing conditions.

Enhanced CO oxidation over potassium-promoted Pt/Al_2O_3 catalysts:Kinetic and infrared spectroscopic study

A series of K-promoted Pt/Al2O3 catalysts were tested for CO oxidation. It was found that the addition of K significantly enhanced the activity. A detailed kinetic study showed that the activation energies of the K-containing catalysts were lower than those of the K-free ones, particularly for catalysts with high Pt contents （51.6 k）/mol for 0.42K-2.0Pt/Al2O3 and 6：3.6 kJ/mol for 2.0Pt/Al2O3 ）. The CO reaction orders were higher for the K-containing catalysts （about -0.2） than for the K-free ones （about -0.5）, with the former having much lower equilibrium constants for CO adsorption than the latter. In situ Fourier-transform infrared spectroscopy showed that surface CO desorption from the 0.42K-2.0Pt/Al2O3 catalyst was easier than from 2.0Pt/Al2O3. The promoting effect of K was therefore caused by weakening of the interactions between CO and surface Pt atoms. This decreased coverage of the catalyst with CO and facilitated competitive O2 chemisorption on the Pt surface, and significantly lowered the reaction barrier between chemisorbed CO and O2 species.

Fabrication of K-promoted iron/carbon nanotubes composite catalysts for the Fischer–Tropsch synthesis of lower olefins

K-promoted iron/carbon nanotubes composite（i.e., Fe K-OX） was prepared by a redox reaction between carbon nanotubes and K2FeO4followed by thermal treatments on a purpose as the Fischer–Tropsch catalyst for the direct conversion of syngas to lower olefins. Its catalytic behaviors were compared with those of the other two Fe-IM and Fe K-IM catalysts prepared by impregnation method followed by thermal treatments. The novel Fe K-OX composite catalyst is found to exhibit higher hydrocarbon selectivity,lower olefins selectivity and chain growth probability as well as better stability. The catalyst structureperformance relationship has been established using multiple techniques including XRD, Raman, TEM and EDS elemental mapping. In addition, effects of additional potassium into the Fe K-OX composite catalyst on the FTO performance were also investigated and discussed. Additional potassium promoters further endow the catalysts with higher yield of lower olefins. These results demonstrated that the introduction method of promoters and iron species plays a crucial role in the design and fabrication of highly active,selective and stable iron-based composite catalysts for the FTO reaction.

Advanced heterolytic H_(2) adsorption of K-added Ru/MgO catalysts for accelerating hydrogen storage into aromatic benzyltoluenes

Herein,we report a highly active K-added Ru/MgO catalyst for hydrogen storage into aromatic benzyltoluenes at low temperatures to advance liquid organic hydrogen carrier technology.The hydrogenation activity of Ru/K/MgO catalysts exhibits a volcano-shaped dependence on the K content at the maximum with 0.02 wt%.This is in good agreement with the strength and capacity of H_(2) adsorption derived from basicity,despite a gradual decrease in the textural property and the corresponding increase in the Ru particle size with increasing the K content.Density functional theory calculations show that heterolytic hydrogen adsorption properties(strength and polarization)are facilitated up to a specific density of K on the Ru–MgO interface and excessive K suppresses heterolytic H_(2) adsorption by direct interaction between K and hydrogen,assuring the hydrogenation activity and H_(2) adsorption capability of Ru/K/MgO catalysts.Hence,the Ru/K/MgO catalyst,when K is added in an optimal amount,is highly effective to accelerate hydrogen storage kinetics at low temperatures owing to the enhanced heterolytic H_(2) adsorption.