Simulation of dilatancy-controlled gas migration processes in saturated bentonite using a coupled multiphase flow and elastoplastic H2 M model

Dilatancy-controlled gas flow in preferential pathways plays a key role in the safety analysis of radioactive waste repositories.This is particularly the case for bentonite,an often-preferred barrier material.Gas flow in preferential pathways is characterized by localization and spontaneous behavior,which is challenging to simulate in numerical models due to strong hydro-mechanical coupling.To analyze a laboratory experiment in the framework of the DECOVALEX-2023 project,this study introduced a new approach of combining continuous modelling methods with spatial material properties derived from material heterogeneities and experimental observations.The proposed model utilized hydro-mechanical spatial distributions,namely Young’s modulus and gas entry pressure,and elastoplasticity combined with a linear swelling model.A conceptual strain-dependent permeability approach simulated dilatancycontrolled gas flow based on hydro-mechanical coupling.To test the effectiveness of the presented approach,a gas injection test in a compacted,saturated bentonite sample was simulated using the opensource code OpenGeoSys 5.8 and compared with experimental observations.The presented methodology is capable of simulating localized gas flow in preferential pathways.The spatial distributions of Young’s modulus and gas entry pressure affect the swelling pressure,relative permeability and,in combination with the strain-dependent permeability model,also the intrinsic permeability.

A Regional-Scale Method of Forecasting Debris Flow Events Based on Water-Soil Coupling Mechanism

A debris flow forecast model based on a water-soil coupling mechanism that takes the debrisflow watershed as a basic forecast unit was established here for the prediction of disasters at the watershed scale.This was achieved through advances in our understanding of the formation mechanism of debris flow.To expand the applicable spatial scale of this forecasting model,a method of identifying potential debris flow watersheds was used to locate areas vulnerable to debris flow within a forecast region.Using these watersheds as forecasting units and a prediction method based on the water-soil coupling mechanism,a new forecasting method of debris flow at the regional scale was established.In order to test the prediction ability of this new forecasting method,the Sichuan province,China was selected as a study zone and the large-scale debris flow disasters attributable to heavy rainfall in this region on July 9,2013 were taken as the study case.According to debris flow disaster data on July 9,2013 which were provided by the geo-environmental monitoring station of Sichuan province,there were 252 watersheds in which debris flow events actually occurred.The current model predicted that 265 watersheds were likely to experience a debris flow event.Among these,43 towns including 204 debrisflow watersheds were successfully forecasted and 24 towns including 48 watersheds failed.The false prediction rate and failure prediction rate of thisforecast model were 23% and 19%,respectively.The results show that this method is more accurate and more applicable than traditional methods.

A model for coupling reservoir inflow and wellbore flow in fishbone wells

A coupling model is proposed in this paper by using the Green Function and Newman's product principle, and the solution method is provided here as well. This model can be used to describe the reservoir inflow and wellbore flow for fishbone wells in an unsteady flow or pseudo-steady flow state. A case study indicates that the bottom hole pressure declines quickly in the unsteady flow period which is very short. The pressure drop per unit time remains unchanged under the pseudo-steady flow conditions. The distribution of flow rate along the main wellbore shows a wave shape under the unsteady flow condition, and the flow rate distribution in each branch is similar. The flow rate distribution along the main wellbore is irregular "U" shaped under the pseudo-steady flow condition, and the space-symmetrical branches have the same flow distribution pattern. In the initial production period, the flow rate increases significantly as the length of branches and the angle between branches and the main wellbore increase. As the production continues, the length and angle of branches have only a slight effect on the flow in fishbone wells.

Numerical analysis of flow-thermal coupling in micro-plasma welding pool of thin-wall part

The formed characteristics of thin-wall part is studied when it is in the process of MPAW. Finite element method is used to simulate the temperature field coupling flow field in the welding of thin-wall part. It is found that because of the obvious effect of heat accumulation in cross-section,where the distribution of temperature field area presents trapezoidal inverted approximately in the molten pool and the non-molten pool area presents level. The surface tension,the electromagnetic force and buoyancy are considered for analyzing the effects on the fluid flow of welding-pool. It can be obtained that the surface tension is the main driving force in the welding pool,which is far greater than electromagnetic force and buoyancy.

Numerical investigation on permeability evolution behavior of rock by an improved flow-coupling algorithm in particle flow code

岩石渗透性的意义重大,构造应力和人类工程活动会对渗透性产生巨大影响。岩石内部孔压与流速分布情况的全面监测对阐明渗透性的演化机制至关重要,其在试验中难以实施,但在数值模拟中可容易实现。因此,本文采用一种离散元方法—颗粒流程序(Particle Flow Code,简称PFC)开展岩石材料渗透性行为的模拟研究。针对PFC中原流–固耦合算法的不足,对其进行改进,使改进后的算法更能体现流体在岩石裂隙中的流动优势。分别采用原算法与改进算法对三轴压缩过程中的渗透性演化进行数值模拟,对比结果表明改进算法能更好地反映试验现象。本文利用改进流–固耦合算法,进一步分析了渗流过程中的孔压和流速分布的演化情况。结果表明,孔压和流速都优先通过裂隙传递而非岩石基质。根据运移流体的能力将裂隙划分为三类:Ⅰ)贯穿进口端和出口端的裂隙;Ⅱ)仅与进口端连接的裂隙;Ⅲ)仅与出口端连接的裂隙。Ⅰ)类裂隙始终是最主要的流速和孔压的传递通道。Ⅱ)类裂隙中孔压首先增大并逐渐趋于稳定,而流速首先增大,当流体运移到裂隙终端后流速减小甚至降低为零。在Ⅲ)类裂隙中,无明显的流体运移或孔压集中。

Two-way coupling of unsaturated-saturated flow by integrating the SWAT and MODFLOW models with application in an irrigation district in arid region of West China

This paper presents the realization of two-way coupling of the unsaturated-saturated flow interactions of the SWAT2000 and MODFLOW96 models on the basis of the integrated surface/groundwater model SWATMOD99, and its application in Hetao Irrigation District (HID), Inner Mongolia, China. Major revisions and enhancements were made to the SWAT2000 and MODFLOW models for simulating the detailed hydrologic budget and coupled unsaturated and saturated interactions, and irrigation canal hydrology for the HID. The simulation results of seasonal groundwater recharge to and evaporate from the shallow groundwater, and the annual water budget over the district are presented and discussed. The results implied the necessity of two-way coupling of the unsaturated-saturated interactions when groundwater is shallow, and the feasibility of making comprehensive use of the information coming from both the surface water and groundwater models to make a more physically-based assessment of the coupled interactions.

Flow-Noise Calculation Using the Mutual Coupling Between Vulcanized Rubber and the Flow Around in Water

A vulcanized rubber layer is usually used on the head of an axisymmetric body to keep it streamlined and watertight.The elastic boundary condition is considered when the flow noise of an axisymmetric body is calculated,and we employ the mutual coupling method between the vulcanized rubber layer and the How around to solve the flow-noise field for an axisymmetric body in water.The results show that the deformation of the vulcanized rubber layer is reduced with the increase in Young's modulus.The Young's modulus of the rubber material should be large enough to keep it streamlined,and the noise power levels in the peak of the axisymmetric body are smaller than the other positions,which provides us with important theoretical support for laying acoustic arrays on the head of the body.

Modeling of the Coupling of the Lightning Shock Wave Flow Circuit in the High Voltage Electrical Network

This article focuses on the aggression of lightning overload on the equipment of the electrical network of sites where storm activity is very dense;and the electrocution of people located in the direct environment of the high-voltage substation during the flow of lightning current to the ground through the ground socket. The modeling of the flow circuit of the shock wave consisting of guard wire, lightning arrester and ground socket couple to the transformer of the high voltage substations, thanks to the approach of a servo block, led to the synthesis of a PID regulator (corrector) whose action is to reject the effects of the overvoltage on the network equipment and to significantly reduce or even cancel the effects of the step or touch voltage due to the distribution of the potential around the ground socket;and thus improve the quality of service of the high-voltage transmission and distribution electricity network, especially in stormy times.

FEM-BEM Coupling for the MHD Pipe Flow in an Exterior Region

In this study, the magnetohydrodynamic (MHD) flow through a circular pipe under the influence of a transverse mag- netic field when the outside medium is also electrically conducting is solved numerically by using FEM-BEM coupling approach. The coupled partial differential equations defined for the interior medium are transformed into homogenous modified Helmholtz equations. For the exterior medium on an infinite region, the Laplace equation is considered for the exterior magnetic field. Unknowns in the equations are also related with the corresponding Dirichlet and Neumann type coupled boundary conditions. Unknown values of the magnetic field on the boundary and for the exterior region are obtained by using BEM, and the unknown velocity and magnetic field inside the pipe are obtained by using SUPG type stabilized FEM. Computations are carried for very high values of magnetic Reynolds numbers Rm1, Reynolds number Re and magnetic pressure Rh of the fluid. The results show that using stabilized method enables us to get stable and accurate numerical approximations consistent with the physical configuration of the problem over rough mesh which also results a cheap computational cost.

A Study of Thermal Response and Flow Field Coupling Simulation around Hayabusa Capsule Loaded with Light-Weight Ablator

The numerical simulation of flow field around Hayabusa capsule loaded with light-weight ablator thermal response coupled with pyrolysis gas flow inside the ablator was carried out. In addition, the radiation from high temperature gas around the capsule was coupled with flow field. Hayabusa capsule reentered the atmosphere about 12 km/sec in velocity and Mach number about 30. During such an atmospheric entry, space vehicle is exposed to very savior aerodynamic heating due to convection and radiation. In this study, Hayabusa capsule was treated as a typical model of the atmospheric entry spacecraft. The light-weight ablator had porous structure, and permeability was an important parameter to analyze flow inside ablator. In this study, permeability was a variable parameter dependent on density of ablator. It is found that the effect of permeability of light-weight ablator was important with this analysis.

A well test analysis model of generalized tube flow and seepage coupling

"Generalized mobility"is used to realize the unification of tube flow and seepage in form and the unification of commonly used linear and nonlinear flow laws in form,which makes it possible to use the same form of motion equations to construct unified governing equations for reservoirs of different scales in different regions.Firstly,by defining the generalized mobility under different flow conditions,the basic equation governing fluid flow in reservoir coupling generalized tube flow and seepage is established.Secondly,two typical well test analysis models for coupling tube flow and seepage flow are given,namely,pipe-shaped composite reservoir model and partially open cylindrical reservoir model.The log-log pressure draw-down type-curve of composite pipe-shaped reservoir model can show characteristics of two sets of linear flow.The log-log pressure drawdown plot of partially opened cylindrical reservoir model can show the characteristics of spherical flow and linear flow,as well as spherical flow and radial flow.The pressure build-up derivative curves of the two models basically coincide with their respective pressure drawdown derivative curves in the early stage,pulling down features in the late stage,and the shorter the production time is,the earlier the pulling down feature appears.Finally,the practicability and reliability of the models presented in this paper are verified by three application examples.

Numerical Simulation of Bidirectional Flow and Solid Coupling of Single Pile and Single Row Pile Column and Wave

The three-dimensional model of the wave and pile structure was established by using Ansysworkbench software. The bidirectional fluid-structure interaction between the pile and wave was simulated by using Stokes wave theory and the Volume of Fluid Method. The pressure distribution diagram of the fluid-structure interface and the pile structure were observed and analyzed. The maximum equivalent stress on the pile was studied and its variation range was obtained. Compared with Von Mises yield criterion, it was concluded that the pile was stable under such wave conditions.

A New Magnetic Sealless Coupling Axial Flow Blood Pump

For rotating blood pump, the sealing problem is a very important one to solve. In this paper, it was introduced that we designed and made a small axial flow pump, applying the magnetic coupling method. The pump consisted of two pump housings, a brushless DC motor, an impeller with five wanes, a pair of magnetic discs, a spacer, an inlet and an outlet areas , bearings, a support frame, and etc. The pump is made of titanium and is 125 mm length, 147 ml volume, total 380g of weight. Performances of outputting, sealing, heat creating and damage to blood by the pump were investigated in vitro experiment. Results showed for external experiment that: (1)The pressure created by the pump was 90 mmHg, the flow rates were 1.2 L/min, 4 L/min, 5.9 L/min and 7.8 L/min correspondingly to 5000 rpm, 6000 rpm, 7000 rpm and 8000rpm rotation speeds. The hydrodynamic performance of the axial flow blood pump was enough to meet a patient need when the blood pump was used as a left ventricular assistant device. (2)The hemolysis test was studied by the normalized index of hemolysis(NIH). The NIH result of the axial flow pump was 0.08 g/100 L. (3)The outside temperature of the pump didnt change obviously in 120 hours of rotation, and the sealing function was very well.

Numerical modeling of influence of thermal flow coupling on flow characteristics of molten steel

Using the equation of continuity and the double equation of Navier-Stokes and k-ε,numerical modeling on a single outlet continuous casting tundish has been carried out during the process of non-thermal flow coupling.The flow field distribution inside the tundish was calculated and the viscosity response time was calculated with the mass transfer equation based on the flow field distribution.The flow characteristics of the molten steel inside the tundish were analyzed,with the results of the numerical modeling compared to the hydraulic modeling.The results showed that the Resident Time Distribution(RTD)curves in the latter anatomosed comparatively better.This certified the validity established by the mathematical model.Numerical modeling was carried out on both large and small tundishes during the processes of thermal flow coupling and also thermal non-flow coupling.The results showed that in regards to large tundishes with relatively simple flow processes,using numerical modeling for thermal flow coupling is necessary.

COUPLING MODEL OF TWO PHASE FLOW IN A FRACTURE-ROCK MATRIX SYSTEM AND ITS STOCHASTIC FEATURE ANALYSIS

This study is concerned with developing a two-dimensional two-phase model that simulate the movement of non-aqueous phase liquid (NAPL) in a fracture-rock matrix system. The intrinsic permeability and the fracture aperture are represented in the model via its KarhunenLoeve expansion. Other parameters and the nodal unknowns, water saturations and water pressures, are represented by their stochastic spectral expansions. The errors resulting from truncation of Karhunen - Loeve and polynomial chaos expansions to a finite number of terms are analyzed. The eigenvalues of stochastic process is found out for any point in the special domain of the problem at any instant in time.

Numerical Simulation of the Mass Movement Process of the 2018 Sedongpu Glacial Debris Flow by Using the Fluid-Solid Coupling Method

In the context of global warming and intensified human activities,glacier instability in plateau regions has increased,and glacier debris flows have become active,which poses a significant threat to the lives and property of people and socioeconomic development.The mass movement process of glacier debris flows is extremely complex,so this paper uses the 2018 Sedongpu glacier debris flow event on the Qinghai-Tibet Plateau as an example and applies a numerical simulation method to invert the whole process of mass movement.In view of the interaction between phases in the process of motion,we use the fluid-solid coupling method to describe the mass movement.The granular-flow model and drift-flux model are employed in FLOW3D software to study the mass movement process of glacier debris flows and explore their dynamic characteristics.The results indicate that the glacier debris flow lasted for 700 s,and the movement process was roughly divided into four stages,including initiation,scraping,surging and deposition;the depositional characteristics calculated by the fluid-solid coupling model are consistent with the actual survey results and have good reliability;strong erosion occurs during the mass movement,the clear volume amplification effect,and the first wave climbs 17.8 m across the slope.The fluid-solid coupling method can better simulate glacier debris flows in plateau regions,which is helpful for the study of the mechanism and dynamic characteristics of such disasters.

A COUPLED MODEL FOR MUILTIPHASE FLUID FLOW AND SEDIMENTATION DEFORMATION IN OIL RESERVOIR AND ITS NUMERICAL SIMULATION

A mathematical model for coupled multiphase fluid flow and sedi-mentation deformation is developed based on fluid-solid interaction mechanism.Afinite difference-finite element numerical approach is presented.The results of anexample show that the fluid-solid coupled effect has great influence on multiphasefluid flow and reservoir recovery performances,and the coupled model has practicalsignificance for oilfield development.

Study on gas–liquid flow characteristics in stirred tank with dual-impeller based on CFD-PBM coupled model

Study on gas–liquid flow in stirred tank with two combinations of dual-impeller(six-bent-bladed turbine(6BT)+six-inclined-blade down-pumping turbine(6 ITD),the six-bent-bladed turbine(6BT)+six-inclinedblade up-pumping turbine(6ITU))was conducted using computational fluid dynamics(CFD)and population balance model(PBM)(CFD-PBM)coupled model.The local bubble size was captured by particle image velocimetry(PIV)measurement.The gas holdup,bubble size distribution and gas–liquid interfacial area were explored at different conditions through numerical simulation.The results showed that the 4 mm bubbles accounted for the largest proportion of 33%at the gas flow rates Q=0.76 m^(3)·h^(-1) and 22%at Q=1.52 m^(3)·h^(-1) for combined impeller of 6BT+6ITU,while the bubbles of 4.7 mm and 5.5 mm were the largest proportion for 6BT+6ITD combination,i.e.25%at Q=0.76 m^(3)·h^(-1) and 22%at Q=1.52 m^(3)·h^(-1),respectively,which indicated that 6BT+6ITU could reduce bubble size effectively and promote gas dispersion.In addition,the gas holdup around impellers was increased obviously with the speed compared with gas flow rate.So it was concluded that 6ITU impeller could be more conductive to the bubble dispersion with more uniform bubble size,which embodied the advantages of 6BT+6ITU combination in gas–liquid mixing.

Fluid Flow and Solidification Simulation in Beam Blank Continuous Casting Process With 3D Coupled Model

Based on turbulent theory, a 3D coupled model of fluid flow and solidification was built using finite difference method and used to study the influence of superheating degree and casting speed on fluid flow and solidification, analyze the interaction between shell and molten steel, and compare the temperature distribution under different technological conditions. The results indicate that high superheating degree can lengthen the liquid-core depth and make the crack and breakout possible, so suitable superheating should be controlled within 35 ℃ according to the simulation results. Casting speed which is one of the most important technological parameters of improving production rate, should be controlled between 0.85 m/min and 1.05 m/min and the caster has great potential in the improvement of blank quality.