The process of the co-cementation layers of low temperature powder multicomponent thermochemical treatment with B-C-N-RE and the structure and properties were studied and compared with those of conventional boro-carbo...The process of the co-cementation layers of low temperature powder multicomponent thermochemical treatment with B-C-N-RE and the structure and properties were studied and compared with those of conventional boro-carbo-nitriding (B-C-N) by X-ray diffractometer, potentiostat and wear machine. The results show that rare earth elements have significant catalytic effect within proper limits. Both wear resistance and corrosion resistance of the B-C-N-RE co-cementation layer are greatly increased in comparison with those of the B-C-N. The function mechanism of rare earth elements is also discussed.展开更多
The XRPD (X-ray powder diffxactometry) patterns of silicon powder with a unit cell structure of diamond were determined from 298 to 1473 K. Lattice parameters of Si linearly increase with temperature. The thermal shif...The XRPD (X-ray powder diffxactometry) patterns of silicon powder with a unit cell structure of diamond were determined from 298 to 1473 K. Lattice parameters of Si linearly increase with temperature. The thermal shifts of the positions of all reflection peaks are linearly correlated with the temperature. The coefficients of the intrinsic linear thermal expansion and volumetric thermal expansion were determined as 3.87×10-6/K and 1.16×10-5/K respectively. It indicates that Si is still a suitable standard in the XRPD method at high temperatures.展开更多
Surface composite layer was fabricated on the AZ91D substrate using the lost foam casting （LFC） process. The pre-coating layer reacted with melt substrate and formed the composite layer, and the coating was mainly c...Surface composite layer was fabricated on the AZ91D substrate using the lost foam casting （LFC） process. The pre-coating layer reacted with melt substrate and formed the composite layer, and the coating was mainly consist of alloying aluminum powder and low-temperature glass powder （PbO-ZnO-Na20）. The vacuum degree, pouring temperature, mold filling process of melt, and pre-coating thickness played an important role during the formation process of composite layer. The results show that surface morphology of composite layer can be divided into three categories： alloying effect of bad and good ceramic layer, alloying effect of good and bad ceramic layer, composite layer of good quality. The main reason for bad alloying layer is that alloying pre-coating thickness is so thin that it is scoured easily and involved in the melt, in addition, it is difficult for melt to infiltrate into the alloying coating owing to the surface tension of coating when the vacuum degree is excessively low. Bad ceramic layer is because of somewhat lower pouring temperature and the thicker alloying coating, due to the absorption of heat from the melt, making low temperature glass powder pre-coating layer fuse inadequate. Thus, to get good quality composite layer, the process conditions must be appropriate, the result shows that the optimum process parameters are as follows： at a pouring temperature of 800 ~C, vacuum degree of -0.06 MPa, alloying pre-coating thickness ofO.4 mm, and low glass powder pre-coating layer thickness ofl mm.展开更多
文摘The process of the co-cementation layers of low temperature powder multicomponent thermochemical treatment with B-C-N-RE and the structure and properties were studied and compared with those of conventional boro-carbo-nitriding (B-C-N) by X-ray diffractometer, potentiostat and wear machine. The results show that rare earth elements have significant catalytic effect within proper limits. Both wear resistance and corrosion resistance of the B-C-N-RE co-cementation layer are greatly increased in comparison with those of the B-C-N. The function mechanism of rare earth elements is also discussed.
文摘The XRPD (X-ray powder diffxactometry) patterns of silicon powder with a unit cell structure of diamond were determined from 298 to 1473 K. Lattice parameters of Si linearly increase with temperature. The thermal shifts of the positions of all reflection peaks are linearly correlated with the temperature. The coefficients of the intrinsic linear thermal expansion and volumetric thermal expansion were determined as 3.87×10-6/K and 1.16×10-5/K respectively. It indicates that Si is still a suitable standard in the XRPD method at high temperatures.
基金the National Natural Science Foundation of China (No.50775085)
文摘Surface composite layer was fabricated on the AZ91D substrate using the lost foam casting （LFC） process. The pre-coating layer reacted with melt substrate and formed the composite layer, and the coating was mainly consist of alloying aluminum powder and low-temperature glass powder （PbO-ZnO-Na20）. The vacuum degree, pouring temperature, mold filling process of melt, and pre-coating thickness played an important role during the formation process of composite layer. The results show that surface morphology of composite layer can be divided into three categories： alloying effect of bad and good ceramic layer, alloying effect of good and bad ceramic layer, composite layer of good quality. The main reason for bad alloying layer is that alloying pre-coating thickness is so thin that it is scoured easily and involved in the melt, in addition, it is difficult for melt to infiltrate into the alloying coating owing to the surface tension of coating when the vacuum degree is excessively low. Bad ceramic layer is because of somewhat lower pouring temperature and the thicker alloying coating, due to the absorption of heat from the melt, making low temperature glass powder pre-coating layer fuse inadequate. Thus, to get good quality composite layer, the process conditions must be appropriate, the result shows that the optimum process parameters are as follows： at a pouring temperature of 800 ~C, vacuum degree of -0.06 MPa, alloying pre-coating thickness ofO.4 mm, and low glass powder pre-coating layer thickness ofl mm.
