Aqueous Zn batteries are promising candidates for grid-scale renewable energy storage.Foil electrodes have been widely investigated and applied as anode materials for aqueous Zn batteries,however,they suffer from limi...Aqueous Zn batteries are promising candidates for grid-scale renewable energy storage.Foil electrodes have been widely investigated and applied as anode materials for aqueous Zn batteries,however,they suffer from limited surface area and severe interfacial issues including metallic dendrites and corrosion side reactions,limiting the depth of discharge(DOD)of the foil electrode materials.Herein,a low-temperature replacement reaction is utilized to in-situ construct a three-dimensional(3D)corrosion-resistant interface for deeply rechargeable Zn foil electrodes.Specifically,the deliberate low-temperature environment controlled the replacement rate between polycrystalline Zn metal and oxalic acid,producing a Zn foil electrode with distinct 3D corrosion-resistant interface(3DCI-Zn),which differed from conventional two-dimensional(2D)protective structure and showed an order of magnitude higher surface area.Consequently,the 3DCI-Zn electrode exhibited dendrite-free and anticorrosion properties,and achieved stable plating/stripping performance for 1000 h at 10 mA cm^(-2)and 10 mAh cm^(-2)with a remarkable DOD of 79%.After pairing with a MnO2cathode with a high areal capacity of 4.2 mAh cm^(-2),the pouch cells delivered 168 Wh L^(-1)and a capacity retention of 89.7%after 100 cycles with a low negative/positive(N/P)ratio of 3:1.展开更多
The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth...The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth of the TiO_2 nanowires, making the preparation straightforward. It also acts as a bottom electrode for the device. A top Al electrode was fabricated by e-beam evaporation process. The Al/TiO_2 nanowire networks/Ti device fabricated in this way displayed a highly repeatable and electroforming-free bipolar resistive behavior with retention for more than 10~4 s and an OFF/ON ratio of approximately 70. The switching mechanism of this Al/TiO_2 nanowire networks/Ti device is suggested to arise from the migration of oxygen vacancies under applied electric field. This provides a facile way to obtain metal oxide nanowire-based Re RAM device in the future.展开更多
THGEM with resistive Kapton electrodes （RETGEM） has been developed to make the THGEM more tolerant to discharges. At higher gains with resistive electrodes, serious discharges may travel to the streamer mode, in con...THGEM with resistive Kapton electrodes （RETGEM） has been developed to make the THGEM more tolerant to discharges. At higher gains with resistive electrodes, serious discharges may travel to the streamer mode, in contrast to violent sparks in conventional GEMs. These streamers are mild and less dan- gerous to the detector and the front-end electronics. RETGEM looks very promising, and its basic properties are being studied. Recently we developed and tested the THGEM with electrodes using 20 um thick resistive kapton foils. The new RETGEM performs at a lower discharge current, has a lower discharge probability, and has a good energy resolution of 27% and a high effective gas gain and long-term stability.展开更多
基金financially supported by the National Natural Science Foundation of China (No.22205068,22109144)the“CUG Scholar”Scientific Research Funds at China University of Geosciences (Wuhan) (Project No.2022118)the Fundamental Research Funds for the Central Universities,China University of Geosciences (Wuhan) (No.162301202673)。
文摘Aqueous Zn batteries are promising candidates for grid-scale renewable energy storage.Foil electrodes have been widely investigated and applied as anode materials for aqueous Zn batteries,however,they suffer from limited surface area and severe interfacial issues including metallic dendrites and corrosion side reactions,limiting the depth of discharge(DOD)of the foil electrode materials.Herein,a low-temperature replacement reaction is utilized to in-situ construct a three-dimensional(3D)corrosion-resistant interface for deeply rechargeable Zn foil electrodes.Specifically,the deliberate low-temperature environment controlled the replacement rate between polycrystalline Zn metal and oxalic acid,producing a Zn foil electrode with distinct 3D corrosion-resistant interface(3DCI-Zn),which differed from conventional two-dimensional(2D)protective structure and showed an order of magnitude higher surface area.Consequently,the 3DCI-Zn electrode exhibited dendrite-free and anticorrosion properties,and achieved stable plating/stripping performance for 1000 h at 10 mA cm^(-2)and 10 mAh cm^(-2)with a remarkable DOD of 79%.After pairing with a MnO2cathode with a high areal capacity of 4.2 mAh cm^(-2),the pouch cells delivered 168 Wh L^(-1)and a capacity retention of 89.7%after 100 cycles with a low negative/positive(N/P)ratio of 3:1.
基金supported by the Natural Sciences and Engineering Research Council(NSERC)of CanadaThe financial support of the State Scholarship Fund of China(No.201506160061)
文摘The resistive switching characteristics of TiO_2 nanowire networks directly grown on Ti foil by a single-step hydrothermal technique are discussed in this paper. The Ti foil serves as the supply of Ti atoms for growth of the TiO_2 nanowires, making the preparation straightforward. It also acts as a bottom electrode for the device. A top Al electrode was fabricated by e-beam evaporation process. The Al/TiO_2 nanowire networks/Ti device fabricated in this way displayed a highly repeatable and electroforming-free bipolar resistive behavior with retention for more than 10~4 s and an OFF/ON ratio of approximately 70. The switching mechanism of this Al/TiO_2 nanowire networks/Ti device is suggested to arise from the migration of oxygen vacancies under applied electric field. This provides a facile way to obtain metal oxide nanowire-based Re RAM device in the future.
基金Support by Youth Found of Institute of High Energy Physics,Chinese Academy of Sciences
文摘THGEM with resistive Kapton electrodes （RETGEM） has been developed to make the THGEM more tolerant to discharges. At higher gains with resistive electrodes, serious discharges may travel to the streamer mode, in contrast to violent sparks in conventional GEMs. These streamers are mild and less dan- gerous to the detector and the front-end electronics. RETGEM looks very promising, and its basic properties are being studied. Recently we developed and tested the THGEM with electrodes using 20 um thick resistive kapton foils. The new RETGEM performs at a lower discharge current, has a lower discharge probability, and has a good energy resolution of 27% and a high effective gas gain and long-term stability.
