Specific Problems in the Planning and Development of Power Network in China

In light of the situation that the nationwide interconnection of power networks in China in the coming years will take shape, it is imperative to emphasize the importance of setting up rational power network configuration. Combined with the characteristics of regional power networks in China, problems in network planning that need to be solved are put forward in this paper, such as, the access of power plants to grid by layers and zones, the share of external power in the load of local network, the power network configuration study in-depth in planning and design stage, and enforcement of receiving-end power network trunk etc. The background of these problems and their countermeasures are also analyzed in the paper.

High power dual-wavelength tunable fiber laser in linear and ring cavity configurations

We describe and compare the performances of two crucial configurations for a tunable dual-wavelength fiber laser, namely, the linear and ring configurations. The performances of these two cavities and the tunability in the dual-wavelength output varied from 0.8 to 11.9 nm are characterized. The ring cavity provides a better performance, achieving an average output power of 0.5 dBm, with a power fluctuation of only 1.1 dB and a signal-to-noise ratio （SNR） of 66 dB. Moreover, the ring cavity has minimal or no background amplified spontaneous emission （ASE）.

A stepless-power-reconfigurable converter for a constant current underwater observatory

The conversion from constant current(CC)to constant voltage(CV)is one of the key technologies of CC underwater observatory systems.A shunt regulator with high stability and high reliability is usually used.Applications,however,are limited by high heat dissipation and low efficiency.In this paper,with an improved shunt regulation method,a novel concept of stepless power reconfiguration(SPR)for the CC/CV module is proposed.In cases with stable or slowly changing load,two modes of CC/CV conversion are proposed to reduce unnecessary power loss of the shunt regulator while being able to retain any operatorpreset power margin in the system:(1)the manual SPR(MSPR)method based on single-loop control method;(2)the automatic SPR(ASPR)method based on inner-outer loop control method.The efficiency of the system is analyzed.How to select some key parameters of the system is discussed.Experimental results show that MSPR and ASPR are both effective and practical methods to reduce heat dissipation and improve the efficiency of the CC/CV module,while the high stability of the shunt regulator remains.

A single die 1.2 V 55 to 95 dB DR delta sigma ADC with configurable modulator and OSR

A single die 1.2 V multi-stage noise shaping（Mash） 2-2 delta sigma analog to digital converter（ADC）for wide applications is implemented. The configurable Mash 2-2 modulator with a new decimation filter design is presented to achieve wide and high dynamic range（DR） for multiple practical applications. The novel modulator can be configured as a Mash 2-2 modulator for high precision or a 2-order modulator for low DR. The decimation filter is designed to select the OSR flexibly among cascaded integrator comb（CIC） filter and two half-band filters（HBF）. The serial peripheral interface（SPI） can be used to adjust the sampling frequency and the oversampling ratio（OSR）. The design was fabricated in a 0.13 m CMOS process with an area of 0.91 mm2and a total power of 5.2 mW. The measurement results show that the dynamic range（DR） of the proposed ADC can change from 55to 95 dB with the configurable OSR from 16 to 256. The spurious free dynamic range（SFDR） and signal-to-noise distortion ratio（SNDR） can get 99 dB and 86.5 dB, respectively.