Performance Evaluation for Medium Voltage MIMO-OFDM Power Line Communication System

Power line communication(PLC)provides intelligent electrical functions such as power quality measurement,fault surveys,and remote control of electrical network.Most of research works have been done in low voltage(LV)scenario due to the fast development of in-home PLC.The aim of this paper is to evaluate the link-level performance of a medium voltage(MV)MIMO-OFDM communication system based on transmission link under underground power line channel.The MIMO channel is modeled as a modified multipath model in the presence of impulsive noise and background noise.We first perform a measurement on the practical MV MIMO channel parameters for a section of buried cable of 1 km long in Ganzhou city,Jiangxi province,China.Based on the measured channel,we design the frame structure based on an IEEE standard for broadband over power line networks[1]to support MV MIMO-OFDM transmission.According to designed frame structure,we design an encoder and a decoder for a dual binary tail-biting turbo code and optimize some key decoder parameters for low bit error rate performance.Finally,the link-level performance for both spatial multiplexing and spatial diversity are evaluated.Numeral results show that MV MIMO-OFDM is a promising approach to provide both high data rate and link reliability for PLC.

Next Generation Narrowband(Under 500 kHz) Power Line Communications(PLC) Standards

In the past decade,several efforts around the world were started with the goal of introducing "smart metering" capabilities into the power grid.These efforts have spurred renewed interest in the design of next generation Narrowband Power Line Communications(NB-PLC) transceivers.In the past few years,ITU-T and IEEE have standardized a family of next generation OFDM-based NB-PLC transceivers some of which are today being considered for massive deployments in Europe and Asia.This paper addresses the important role that PLC has not only for smart metering but also for many other Smart Grid applications,and also gives an overview of the main differences between these next generation NB-PLC standards.

A FAST BIT-LOADING ALGORITHM FOR HIGH SPEED POWER LINE COMMUNICATIONS

Adaptive bit-loading is a key technology in high speed power line communications with the Orthogonal Frequency Division Multiplexing (OFDM) modulation technology. According to the real situation of the transmitting power spectrum limited in high speed power line communications, this paper explored the adaptive bit loading algorithm to maximize transmission bit number when transmitting power spectral density and bit error rate are not exceed upper limit. With the characteristics of the power line channel, first of all, it obtains the optimal bit loading algorithm, and then provides the improved algorithm to reduce the computational complexity. Based on the analysis and simulation, it offers a non-iterative bit allocation algorithm, and finally the simulation shows that this new algorithm can greatly reduce the computational complexity, and the actual bit allocation results close to optimal.

WAVELET-BASED OFDM-CDMA HIGH SPEED POWER LINE COMMUNICATION SYSTEMS

This letter derives the Equivalent M-band Discrete Wavelet(EMDW) transmission mode of Orthogonal Frequency Division Multiplexing(OFDM) transmission systems, and presents a new Quadrature M-band Discrete Wavelet(QMDW) based OFDM-CDMA(Code Division Multiple Access) communication systems for high speed Power Line Communication (PLC) channels.This system gives much better robustness to Inter-Channel Interference (ICI), Multi-User Interference (MUI) and noise interference, which is verified by simulation.

Design and Implementation of Power Line Communication Module for Network Household Appliance

This paper presents the basic principle of OFDM technology and some key technologies, and do the simulation of OFDM technology. Secondly, on the basis of the design of intelligent Home Furnishing system demand, this paper research and design low voltage power line carrier communication based on Intelligent Home Furnishing system for. The circuit takes ARM Cortex-M3 based on the ARM kernel as the central controller, and realize remote monitoring and control of equipment through the transplantation of uC/OS-II system and the design of Web Serve program. Using OFDM power line carrier communication modes as networking mode of the intelligent Home Furnishing system. Finally, the paper realize the intelligent node and relevant software that constitute a complete system of intelligent Home Furnishing.

Modelling of Impedance Matching Circuit with Digital Capacitor in Narrowband Power Line Communication

Power line communication technology is used in various applications, from high voltage network to the low voltage network, as it is the only wired communication technology that is comparable with wireless communication network. It works by injecting a modulated carrier wave into the electric cables from one transceiver to another. But still, the noise level and impedance mismatch are still the main concern of this technology, particularly in the low voltage network in residential area. Power line has additive non-white noise and extremely harsh environment for communication. At the same time, there is signal attenuation along the power line caused by the impedance mismatch in the power line network. Even though these problems can be controlled using a band-pass filter and an impedance matching circuit respectively, but the impedances in the power line are time and location variant and it is rather difficult to design a circuit that allows maximum power transfer in the system all the time. Thus in this paper, a new adaptive impedance matching circuits is proposed for narrowband power line communication. This methodology is derived based on the RLC band-pass filter circuit. This concept is designed to achieve simpler configuration and higher matching resolution.

A reliable opportunistic routing for smart grid with in-home power line communication networks

The topology of in-home power line communication(PLC) networks varies frequently, which makes traditional routing algorithms failure. To solve this problem, an end-to-end transmission time for remaining path(TTRP) metric-based opportunistic routing(TTRPOR) is proposed. Since a local broadcasting scheme is adopted, the algorithm can find the optimal path for forwarding packets in a dynamic PLC network. The closed-form of the outage probability for a PLC channel is derived to estimate the TTRP. It is proved that the average throughput can achieve maximum as the metric TTRP is utilized to sort candidate forwarding nodes.Numerical results show that the end-to-end throughput of networks with TTRPOR, outperforms that of the network adopting DSR and EXOR, especially for the case of varying-topology in-home PLC networks.

Particle filtering based channel estimation in OFDM power line communication

Particle filtering （PF） algorithm has the powerful potential for coping with difficult non-linear and non-Gaussian problems. Aiming at non-linear, non-Gaussian and time-varying characteristics of power line channel, a time-varying channel estimation scheme combined PF algorithm with decision feedback method is proposed. In the proposed scheme, firstly the indoor power line channel is measured using the pseudo-noise （PN） correlation method, and a first-order dynamic autoregressive （AR） model is set up to describe the measured channel, then, the channel states are estimated dynamically from the received signals by exploiting the proposed scheme. Meanwhile, due to the complex noise distribution of power line channel, the performance of channel estimation based on the proposed scheme under the Middleton class A impulsive noise environment is analyzed. Comparisons are made with the channel estimation scheme respectively based on least square （LS）, Kalman filtering （KF） and the proposed algorithm. Simulation indicates that PF algorithm dealing with this power line channel estimation difficult non-linear and non-Gaussian problems performance is superior to those of LS and KF respectively, so the proposed scheme achieves higher estimation accuracy. Therefore, it is confirmed that PF algorithm has its own unique advantage for power line channel estimation.

An analog front end with a 12-bit 3.2-MS/s SAR ADC for a power line communication system

This paper presents an analog front end for a power line communication system, including a 12-bit 3.2-MS/s energy-efficient successive approximation register analog-to-digital converter, a positive feedback programmable gain amplifier, a 9.8 ppm/℃ bandgap reference and on-chip low-output voltage regulators. A two segment capacitive array structure （6 MSB 5 LSB） composed by split capacitors is designed for the SAR core to save area cost and release reference voltage accuracy requirements. Implemented in the GSMC 0.13 #m 1.5 V/12 V dual-gate 4P6M e-flash process, the analog front end occupies an area of 0.457 mm2 and consumes power of 18.8 mW, in which 1.1 mW cost by the SAR ADC. Measured at 500 kHz input, the spurious-free dynamic range and signal-to-noise plus distortion ratio of the ADC are 71.57 dB and 60.60 dB respectively, achieving a figure of merit of 350 U/conversion-step.

In-home Power Line Communication Media Access Control Protocol Based on Collision Resolution

Most existing media access control(MAC) protocols in power line communication(PLC) networks just discard the colliding data packets when collision occurs.The collision deteriorates throughput and delay performance of system under high traffic conditions.This article presents a novel media access scheme with fast collision resolution for in-home power line networks.It works by first recognizing the colliding stations through detecting the inserted unique ID sequence ahead of data packets,then the source nodes retransmitting their packets immediately after the collision slot.The proposed protocol maintains the benefits of ALOHA systems.It needs no scheduling overhead and is suitable for bursty sources,such as multimedia data packets.Computer simulations have demonstrated that this approach can achieve high throughput due to its ability of resolving collisions.

Side-Channel Attacks & Data Exfiltration Using Wall Outlet USB Power Adapters

The number and creativity of side channel attacks have increased dramatically in recent years. Of particular interest are attacks leveraging power line communication to 1) gather information on power consumption from the victim and 2) exfiltrate data from compromised machines. Attack strategies of this nature on the greater power grid and building infrastructure levels have been shown to be a serious threat. This project further explores this concept of a novel attack vector by creating a new type of penetration testing tool: an USB power adapter capable of remote monitoring of device power consumption and communicating through powerline communications.

Converged Communication Technology and Application in Intelligent Dual-Interactive Power System

Acknowledgments Thanks for assistance and support, which is provided by State Grid Corporation of China and State Grid Communication Information ＆ Telecommunication Company, for the project in the process of research and development. Fibrlink Communications Co., Ltd will keep exerting itself to innovating, which aims for making more contribution of the smart grid on energy reduction and environment protection.

Polar codes based OFDM-PLC systems in the presence of impulsive noise

Power line communication(PLC)has the potential to become the preferred technique for providing broadband communication to homes and offices with advantage of eliminating the need for new wiring infrastructure and reducing the cost.But it suffers from the impulsive noise because it introduces significant time variance into the power line channel.In this paper,a polar codes based orthogonal frequency division multiplexing(OFDM)PLC system is proposed to deal with the impulsive noise and thereby improve the transmission performance.Firstly,the impulsive noise is modelled with a multi-damped sine function by analyzing the time behavior of impulse events.Then the polar codes are used to combat the impulsive noise of PLC channel,and a low complexity bit-flipping decoding method based on CRC-aided successive cancellation list(CA-SCL)decoding algorithm is proposed.Simulations evaluate the proposed decoding algorithm and the results validate the suggested polar codes based OFDM-PLC scheme which can improve the BER performance of PLC with impulsive interference.

Analysis of electromagnetic field emitted from home plug power line used for indoor high-speed broadband communication

High-speed broadband power line communication(BPL)is a novel and practicable technique for NetatHome or home area local area networking(LAN).Because of the characteristics of BPL,the electromagnetic wave emitted from the BPL transmission media will influence the indoor electromagnetic environment,which would also affect the performance of other wireless communications.Based on the analysis of the communication channel characteristic,network impedance and attenuation characteristic of the BPL,this paper proposes a novel model for calculating the BPL radiation and the computer simulation model,which are proved by the coherence of the simulation and the test data.The interferences from the high-speed BPL to indoor wireless communications are analyzed to stipulate the standards of high-speed BPL in the future.

Performance analysis for a two-way relaying power line network with analog network coding

In this paper, we investigate a two-way relaying power line communication （PLC） network with analog network coding. We focus on the analysis of the system outage probability, symbol error rate, and average capacity. Specifically, we first derive the probability density function （PDF） of the received signal-to-noise ratio （SNR） with a closed form, by exploiting the statistical properties of the PLC channel. Then with the help of this PDF, we develop the outage probability, symbol error rate, and average capacity with closed forms, based on the Hermite polynomial. Simulations show that the derived analytical results are consistent with those by Monte Carlo simulation.

Smart Grid Cyber Security： An Overview of Threats and Countermeasures

The smart grid is the next generation of power and distribution systems. The integration of advanced network, communications, and computing techniques allows for the enhancement of efficiency and reliability. The smart grid interconnects the flow of information via the power line, intelligent metering, renewable and distributed energy systems, and a monitoring and controlling infrastructure. For all the advantages that these components come with, they remain at risk to a spectrum of physical and digital attacks. This paper will focus on digital vulnerabilities within the smart grid and how they may be exploited to form full fledged attacks on the system. A number of countermeasures and solutions from the literature will also be reported, to give an overview of the options for dealing with such problems. This paper serves as a triggering point for future research into smart grid cyber security.

Exploiting the Cellular Infrastructure for Data Transmission in Smart Metering Systems

To implement the access and backhaul networks for Smart Metering (SM) systems various technologies are combined with the existing communications infrastructure. This paper deals with data transmission in SM systems, focusing on how the existing cellular networks infrastructure is employed to implement SM access communication networks. The analysis aims at analyzing the role of the cellular communications infrastructure taking into account the spatial distribution and installation points of the smart meters, the urban and topological characteristics of the SM deployment areas and the common practice so far followed by the utilities. It is demonstrated that cellular communications, either exclusively or combined with power line communications, enable immediate and scalable deployment of SM access communication networks at low installation cost, thus constituting the basic option for the implementation of smart metering.

Narrowband PLC Channel Workbench to Emulate Transmission in Smart Grid

A real-time workbench able to reproduce the same behavior as an indoor network is in order. Such a tool will help researchers and industrials extend the smart grid technology indoors and have a better acknowledgment of Smart Grid systems interoperability. In order to develop such a tool many approaches should be studied to choose the most suitable one by comparing the models and the technologies. The considered hardware are the embedded systems and the selected approach is the statistical one. It appears that the FlR filter is the most pertinent approach.

Distributed and Decentralized Control Architectures for Converter-Interfaced Microgrids

This paper gives a summary on recently available technologies for decentralized and distributed control of microgrids.They can be classified into two general categories:1)power line communication based architectures and 2)multi-agent based architectures.The essential control methods and information sharing algorithms applied in these architectures are reviewed and examined in a hierarchical manner,in order to point out benefits they will bring to future microgrid applications.The paper is concluded with a summary on existing methods and a discussion on future development trends.