A Two-Layer Active Power Optimization and Coordinated Control for Regional Power Grid Partitioning to Promote Distributed Renewable Energy Consumption

With the large-scale development and utilization of renewable energy,industrial flexible loads,as a kind of loadside resource with strong regulation ability,provide new opportunities for the research on renewable energy consumption problem in power systems.This paper proposes a two-layer active power optimization model based on industrial flexible loads for power grid partitioning,aiming at improving the line over-limit problem caused by renewable energy consumption in power grids with high proportion of renewable energy,and achieving the safe,stable and economical operation of power grids.Firstly,according to the evaluation index of renewable energy consumption characteristics of line active power,the power grid is divided into several partitions,and the interzone tie lines are taken as the optimization objects.Then,on the basis of partitioning,a two-layer active power optimization model considering the power constraints of industrial flexible loads is established.The upper-layer model optimizes the planned power of the inter-zone tie lines under the constraint of the minimum peak-valley difference within a day;the lower-layer model optimizes the regional source-load dispatching plan of each resource in each partition under the constraint of theminimumoperation cost of the partition,so as to reduce the line overlimit phenomenon caused by renewable energy consumption and save the electricity cost of industrial flexible loads.Finally,through simulation experiments,it is verified that the proposed model can effectively mobilize industrial flexible loads to participate in power grid operation and improve the economic stability of power grid.

Research on Reactive Power Optimization of Offshore Wind Farms Based on Improved Particle Swarm Optimization

The lack of reactive power in offshore wind farms will affect the voltage stability and power transmission quality of wind farms.To improve the voltage stability and reactive power economy of wind farms,the improved particle swarmoptimization is used to optimize the reactive power planning in wind farms.First,the power flow of offshore wind farms is modeled,analyzed and calculated.To improve the global search ability and local optimization ability of particle swarm optimization,the improved particle swarm optimization adopts the adaptive inertia weight and asynchronous learning factor.Taking the minimum active power loss of the offshore wind farms as the objective function,the installation location of the reactive power compensation device is compared according to the node voltage amplitude and the actual engineering needs.Finally,a reactive power optimizationmodel based on Static Var Compensator is established inMATLAB to consider the optimal compensation capacity,network loss,convergence speed and voltage amplitude enhancement effect of SVC.Comparing the compensation methods in several different locations,the compensation scheme with the best reactive power optimization effect is determined.Meanwhile,the optimization results of the standard particle swarm optimization and the improved particle swarm optimization are compared to verify the superiority of the proposed improved algorithm.

Chaos quantum particle swarm optimization for reactive power optimization considering voltage stability

The reactive power optimization considering voltage stability is an effective method to improve voltage stablity margin and decrease network losses,but it is a complex combinatorial optimization problem involving nonlinear functions having multiple local minima and nonlinear and discontinuous constraints. To deal with the problem,quantum particle swarm optimization (QPSO) is firstly introduced in this paper,and according to QPSO,chaotic quantum particle swarm optimization (CQPSO) is presented,which makes use of the randomness,regularity and ergodicity of chaotic variables to improve the quantum particle swarm optimization algorithm. When the swarm is trapped in local minima,a smaller searching space chaos optimization is used to guide the swarm jumping out the local minima. So it can avoid the premature phenomenon and to trap in a local minima of QPSO. The feasibility and efficiency of the proposed algorithm are verified by the results of calculation and simulation for IEEE 14-buses and IEEE 30-buses systems.

Distribution Network Reactive Power Optimization Based on Ant Colony Optimization and Differential Evolution Algorithm

Due to the inherent complexity, traditional ant colony optimization （ACO） algorithm is inadequate and insufficient to the reactive power optimization for distribution network. Therefore, firstly the ACO algorithm is improved in two aspects： pheromone mutation and re-initialization strategy. Then the thought of differential evolution （DE） algorithm is proposed to be merged into ACO, and by producing new individuals with random deviation disturbance of DE, pheromone quantity left by ants is disturbed appropriately, to search the optimal path, by which the ability of search having been improved. The proposed algorithm is tested on IEEE30-hus system and actual distribution network, and the reactive power optimization results are calculated to verify the feasibility and effectiveness of the improved algorithm.

Research of Rural Power Network Reactive Power Optimization Based on Improved ACOA

In view of the serious reactive power loss in the rural network, improved ant colony optimization algorithm （ACOA） was used to optimize the reactive power compensation for the rural distribution system. In this study, the traditional ACOA was improved in two aspects： one was the local search strategy, and the other was pheromone mutation and re-initialization strategies. The reactive power optimization for a county＇s distribution network showed that the improved ACOA was practicable.

Data-driven Reactive Power Optimization of Distribution Networks via Graph Attention Networks

Reactive power optimization of distribution networks is traditionally addressed by physical model based methods,which often lead to locally optimal solutions and require heavy online inference time consumption.To improve the quality of the solution and reduce the inference time burden,this paper proposes a new graph attention networks based method to directly map the complex nonlinear relationship between graphs(topology and power loads)and reactive power scheduling schemes of distribution networks,from a data-driven perspective.The graph attention network is tailored specifically to this problem and incorporates several innovative features such as a self-loop in the adjacency matrix,a customized loss function,and the use of max-pooling layers.Additionally,a rulebased strategy is proposed to adjust infeasible solutions that violate constraints.Simulation results on multiple distribution networks demonstrate that the proposed method outperforms other machine learning based methods in terms of the solution quality and robustness to varying load conditions.Moreover,its online inference time is significantly faster than traditional physical model based methods,particularly for large-scale distribution networks.

Enhancing Renewable Energy Integration:A Gaussian-Bare-Bones Levy Cheetah Optimization Approach to Optimal Power Flow in Electrical Networks

In the contemporary era,the global expansion of electrical grids is propelled by various renewable energy sources(RESs).Efficient integration of stochastic RESs and optimal power flow(OPF)management are critical for network optimization.This study introduces an innovative solution,the Gaussian Bare-Bones Levy Cheetah Optimizer(GBBLCO),addressing OPF challenges in power generation systems with stochastic RESs.The primary objective is to minimize the total operating costs of RESs,considering four functions:overall operating costs,voltage deviation management,emissions reduction,voltage stability index(VSI)and power loss mitigation.Additionally,a carbon tax is included in the objective function to reduce carbon emissions.Thorough scrutiny,using modified IEEE 30-bus and IEEE 118-bus systems,validates GBBLCO’s superior performance in achieving optimal solutions.Simulation results demonstrate GBBLCO’s efficacy in six optimization scenarios:total cost with valve point effects,total cost with emission and carbon tax,total cost with prohibited operating zones,active power loss optimization,voltage deviation optimization and enhancing voltage stability index(VSI).GBBLCO outperforms conventional techniques in each scenario,showcasing rapid convergence and superior solution quality.Notably,GBBLCO navigates complexities introduced by valve point effects,adapts to environmental constraints,optimizes costs while considering prohibited operating zones,minimizes active power losses,and optimizes voltage deviation by enhancing the voltage stability index(VSI)effectively.This research significantly contributes to advancing OPF,emphasizing GBBLCO’s improved global search capabilities and ability to address challenges related to local minima.GBBLCO emerges as a versatile and robust optimization tool for diverse challenges in power systems,offering a promising solution for the evolving needs of renewable energy-integrated power grids.

Layered power scheduling optimization of PV hydrogen production system considering performance attenuation of PEMEL

To analyze the additional cost caused by the performance attenuation of a proton exchange membrane electrolyzer(PEMEL)under the fluctuating input of renewable energy,this study proposes an optimization method for power scheduling in hydrogen production systems under the scenario of photovoltaic(PV)electrolysis of water.First,voltage and performance attenuation models of the PEMEL are proposed,and the degradation cost of the electrolyzer under a fluctuating input is considered.Then,the calculation of the investment and operating costs of the hydrogen production system for a typical day is based on the life cycle cost.Finally,a layered power scheduling optimization method is proposed to reasonably distribute the power of the electrolyzer and energy storage system in a hydrogen production system.In the up-layer optimization,the PV power absorbed by the hydrogen production system was optimized using MALTAB+Gurobi.In low-layer optimization,the power allocation between the PEMEL and battery energy storage system(BESS)is optimized using a non-dominated sorting genetic algorithm(NSGA-Ⅱ)combined with the firefly algorithm(FA).A better optimization result,characterized by lower degradation and total costs,was obtained using the method proposed in this study.The improved algorithm can search for a better population and obtain optimization results in fewer iterations.As a calculation example,data from a PV power station in northwest China were used for optimization,and the effectiveness and rationality of the proposed optimization method were verified.

Hybrid Power Bank Deployment Model for Energy Supply Coverage Optimization in Industrial Wireless Sensor Network

Energy supply is one of the most critical challenges of wireless sensor networks(WSNs)and industrial wireless sensor networks(IWSNs).While research on coverage optimization problem(COP)centers on the network’s monitoring coverage,this research focuses on the power banks’energy supply coverage.The study of 2-D and 3-D spaces is typical in IWSN,with the realistic environment being more complex with obstacles(i.e.,machines).A 3-D surface is the field of interest(FOI)in this work with the established hybrid power bank deployment model for the energy supply COP optimization of IWSN.The hybrid power bank deployment model is highly adaptive and flexible for new or existing plants already using the IWSN system.The model improves the power supply to a more considerable extent with the least number of power bank deployments.The main innovation in this work is the utilization of a more practical surface model with obstacles and training while improving the convergence speed and quality of the heuristic algorithm.An overall probabilistic coverage rate analysis of every point on the FOI is provided,not limiting the scope to target points or areas.Bresenham’s algorithm is extended from 2-D to 3-D surface to enhance the probabilistic covering model for coverage measurement.A dynamic search strategy(DSS)is proposed to modify the artificial bee colony(ABC)and balance the exploration and exploitation ability for better convergence toward eliminating NP-hard deployment problems.Further,the cellular automata(CA)is utilized to enhance the convergence speed.The case study based on two typical FOI in the IWSN shows that the CA scheme effectively speeds up the optimization process.Comparative experiments are conducted on four benchmark functions to validate the effectiveness of the proposed method.The experimental results show that the proposed algorithm outperforms the ABC and gbest-guided ABC(GABC)algorithms.The results show that the proposed energy coverage optimization method based on the hybrid power bank deployment model generates more accurate results than the results obtained by similar algorithms(i.e.,ABC,GABC).The proposed model is,therefore,effective and efficient for optimization in the IWSN.

Data-driven Reactive Power Optimization for Distribution Networks Using Capsule Networks

The construction of advanced metering infrastructure and the rapid evolution of artificial intelligence bring opportunities to quickly searching for the optimal dispatching strategy for reactive power optimization. This can be realized by mining existing prior knowledge and massive data without explicitly constructing physical models. Therefore, a novel datadriven approach is proposed for reactive power optimization of distribution networks using capsule networks(CapsNet). The convolutional layers with strong feature extraction ability are used to project the power loads to the feature space to realize the automatic extraction of key features. Furthermore, the complex relationship between input features and dispatching strategies is captured accurately by capsule layers. The back propagation algorithm is utilized to complete the training process of the CapsNet. Case studies show that the accuracy and robustness of the CapsNet are better than those of popular baselines(e.g.,convolutional neural network, multi-layer perceptron, and casebased reasoning). Besides, the computing time is much lower than that of traditional heuristic methods such as genetic algorithm, which can meet the real-time demand of reactive power optimization in distribution networks.

Reactive power optimization of a distribution network with high-penetration of wind and solar renewable energy and electric vehicles

As high amounts of new energy and electric vehicle(EV)charging stations are connected to the distribution network,the voltage deviations are likely to occur,which will further affect the power quality.It is challenging to manage high quality voltage control of a distribution network only relying on the traditional reactive power control mode.If the reactive power regulation potentials of new energy and EVs can be tapped,it will greatly reduce the reactive power optimization pressure on the network.Keeping this in mind,our reasearch first adds EVs to the traditional distribution network model with new forms of energy,and then a multi-objective optimization model,with achieving the lowest line loss,voltage deviation,and the highest static voltage stability margin as its objectives,is constructed.Meanwihile,the corresponding model parameters are set under different climate and equipment conditions.Ultimately,the optimization model under specific scenarios is obtained.Furthermore,considering the supply and demand relation-ship of the network,an improved technique for order preference by similarity to an ideal solution decision method is proposed,which aims to judge the adaptability of different algorithms to the optimized model,so as to select a most suitable algorithm for the problem.Finally,a comparison is made between the constructed model and a model without new energy.The results reveal that the constructed model can provide a high quality reactive power regula-tion strategy.

Hierarchically Correlated Equilibrium Q-learning for Multi-area Decentralized Collaborative Reactive Power Optimization

A hierarchically correlated equilibrium Q-learning(HCEQ)algorithm for reactive power optimization that considers carbon emission on the grid-side as an optimization objective,is proposed here.Based on the multi-area decentralized collaborative framework,the controllable variables in each region are divided into several optimization layers,which is an effective method for solving the limitations posed by dimensionality.The HCEQ provides constant information on the interaction between the state-action value function matrices,as well as on the cooperative game equilibrium among agents in each region.After acquiring the optimal value function matrix in the pre-learning process,HCEQ is able to quickly achieve an optimal solution online.Simulation of the IEEE 57-bus system is performed,which demonstrates that the proposed algorithm can effectively solve multi-area decentralized collaborative reactive power optimization,with the desired global search capabilities and convergence speed.

A New Filter Collaborative State Transition Algorithm for Two-Objective Dynamic Reactive Power Optimization

Dynamic Reactive Power Optimization(DRPO) is a large-scale, multi-period, and strongly coupled nonlinear mixed-integer programming problem that is difficult to solve directly. First, to handle discrete variables and switching operation constraints, DRPO is formulated as a nonlinear constrained two-objective optimization problem in this paper. The first objective is to minimize the real power loss and the Total Voltage Deviations(TVDs), and the second objective is to minimize incremental system loss. Then a Filter Collaborative State Transition Algorithm(FCSTA) is presented for solving DRPO problems. Two populations corresponding to two different objectives are employed. Moreover, the filter technique is utilized to deal with constraints. Finally, the effectiveness of the proposed method is demonstrated through the results obtained for a 24-hour test on Ward & Hale 6 bus, IEEE 14 bus, and IEEE 30 bus test power systems. To substantiate the effectiveness of the proposed algorithms, the obtained results are compared with different approaches in the literature.

PMGA and its application in area and power optimization for ternary FPRM circuit

Based on the research of population migration algorithms （PMAs）, a population migration genetic algo- rithm （PMGA） is proposed, combining a PMA with a genetic algorithm. A scheme of area and power optimization for a ternary FPRM circuit is proposed by using the PMGA. Firstly, according to the ternary FPRM logic function expression, area and power estimation models are established. Secondly, the PMGA is used to search for the best area and power polarity. Finally, 10 MCNC Benchmark circuits are used to verify the effectiveness of the proposed method. The results show that the ternary FPRM circuits optimized by the PMGA saved 13.33% area and 20.00% power on average than the corresponding FPRM circuits optimized by a whole annealing genetic algorithm.

Transmit Power Optimization for Relay-Aided Multi-Carrier D2D Communication

In this paper, we consider the power optimization problem in Orthogonal Frequency Division Multiplexing （OFDM）-based relay-enhanced device-to-device （D2D） communication. In a single cell transmission scenario, dual- hop communication is assumed in which each D2D user re-uses the spectrum of just one Cellular User （CU）. In this work, we formulate a joint optimization scheme under a Decode-and-Forward （DF） relaying protocol to maximize the sum throughput of D2D and cellular networks via power allocation over different sub-carriers. The problem is thus transformed into a standard convex optimization, subject to individual power constraints at different transmitting nodes. We exploit the duality theory to decompose the problem into several sub-problems and use Karush-Kuhn- Tucker （KKT） conditions to solve each sub-problem. We provide simulation results to validate the performance of our proposed scheme.

Suspension Power Optimization of Unbalanced Structure Permanent-electro Hybrid Magnet Using Genetic Algorithm

The permanent magnet electromagnetic hybridmagnet (PEHM) has the advantages of low energy consumptionand a large suspension air gap. In this study, an unbalancedPEHM structure is proposed, which combines the advantages ofthe previous hybrid magnet structure. First, by establishing themagnetic circuit model of the new hybrid magnet structure, theinfluence of magnetic field distribution on the working magneticcircuit of the magnet is analyzed, and the method of magneticforce correction calculation of the new structure magnet isgiven. Then, the validity of the magnetic calculation method isverified by the 3D finite element method (FEM). Furthermore, theaverage suspension power force ratio is used as the optimizationgoal, and the system parameters of the hybrid magnet under aworking air gap of 6–10 mm and a load condition of 15000–20000 N are optimized by a genetic algorithm. Compared withthe previous hybrid magnet, the optimized hybrid magnet systemcan maintain lower power consumption under comprehensiveworking conditions.

A Study of Power Sources Optimization in Guangdong

The main problem existing in Guangdong electric power sources is analyzed in this paper. Based on theanalysis on energy-supply features, power demand and the technical and economic performances of various powersources in Guangdong, the power sources construction scale and its structure are studied and analyzed in detail byusing Generation Expansion Software Package (GESP). The future development of Guangdong electric power sourcesunder the new situation of "Power from West to East" is studied as well.[

Power optimization under brightness and communication requirements for visible light communication based on MacAdam ellipse

Data transmission with RGB LEDs is attracting significant research interest in VLC(Visible Light Communication).We consider the power optimization under brightness and communication requirements for RGB LEDs,and model the color constraint using the MacAdam ellipse instead of a fixed point in the chromaticity diagram.Then an optimization problem is formulated to determine the transmission power consumption and the corresponding coordinates in the chromaticity diagram.We propose a novel two-step algorithm to solve the optimization problem with lower implementation complexity.Numerical results show that the proposed approach shows the same performance as the optimal solution using a brute-force method,and requires the lower power consumption using MacAdam ellipse instead of merely a fixed point in the chromaticity diagram.

Power optimization for multiple QoS,delay,and BER classes relying on nite-delay information theory

Future communication systems will include di erent types of messages requiring di erent transmission rates,packet lengths,and service qualities.We address the power-optimization issues of communication systems conveying multiple message types based on nite-delay information theory.Given both the normalized transmission rate and the packet length of a system,the actual residual decoding error rate is a function of the transmission power.We propose a generalized power allocation framework for multiple message types.Two di erent optimization cost functions are adopted:the number of service-quality violations encountered and the sum log ratio of the residual decoding error rate.We provide the optimal analytical solution for the former cost function and a heuristic solution based on a genetic algorithm for the latter one.Finally,the performance of the proposed solutions are evaluated numerically.

Optimization of High Power 1.55-μm Single Lateral Mode Fabry-Perot Ridge Waveguide Lasers

Optimization of the high power single-lateral-mode double-trench ridge waveguide semiconductor laser based on InGaAsP/InP quantum-well heterostructures with a separate confinement layer is reported. Two different waveguide structures of Fabry-Perot lasers emitting at a wavelength of 1.55 μm are fabricated. The influence of an effective lateral refractive index step on the maximum output power is investigated. A cw single mode output power of 165mW is obtained for a 1-mm-long uncoated laser.