The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness,...The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness, reduction rate and feed rate on expanding in diameter are analyzed and some methods to prevent expanding in diameter are given.展开更多
This paper is a further study of two papers [1] and [2], which were related to Ill-Conditioned Load Flow Problems and were published by IEEE Trans. PAS. The authors of this paper have some different opinions, for exam...This paper is a further study of two papers [1] and [2], which were related to Ill-Conditioned Load Flow Problems and were published by IEEE Trans. PAS. The authors of this paper have some different opinions, for example, the 11-bus system is not an ill-conditioned system. In addition, a new approach to solve Load Flow Problems, E-ψtc, is introduced. It is an explicit method;solving linear equations is not needed. It can handle very tough and very large systems. The advantage of this method has been fully proved by two examples. The authors give this new method a detailed description of how to use it to solve Load Flow Problems and successfully apply it to the 43-bus and the 11-bus systems. The authors also propose a strategy to test the reliability, and by solving gradient equations, this new method can answer if the solution exists or not.展开更多
For a long time, because of the lack of investment capital and enough attentions, the overall constructions of rural power grid were far behind than the urban power grid in Chongqing Jiangbei Power Company. The low vo...For a long time, because of the lack of investment capital and enough attentions, the overall constructions of rural power grid were far behind than the urban power grid in Chongqing Jiangbei Power Company. The low voltage problems were highlighted in the rural power grid due to the characteristics of rural power grid. Using the distribution network flow calculation method, we evaluated the low voltage problems of the rural power grid which belongs to Chongqing Jiangbei Power Company. In addition, we collected the data of distribution transformers in electricity consumption peak period. Some practical management strategies were proposed by the analysis and evaluation of potential and appeared low voltage problems.展开更多
A variational formulation of the synthesis problem for plane radiating systems according to the prescribed power directivity pattern (DP) is considered. The function representing the mean-square deviation of the presc...A variational formulation of the synthesis problem for plane radiating systems according to the prescribed power directivity pattern (DP) is considered. The function representing the mean-square deviation of the prescribed and synthesized power DPs and containing the additional term with squared norm of the current or field in the antenna aperture is considered as the criterion of optimization. Freedom to choose the phase DP is used to improve the proximity of the prescribed and synthesized DPs. In such formulation, the classes of non-linear problems, for which the non-uniqueness of solutions, their branching and bifurcation are characteristic, arise. The properties of solutions depend on the electric size of radiating system and prescribed power DP. From a practical point of view, the existence of different solutions creating the same or similar DPs, gives the opportunity to choose the solution that has a simpler implementation. The synthesis problems for plane radiating systems and plane arrays are considered.展开更多
In this paper, a new approach called Power Series Approximation Method (PSAM) is developed for the numerical solution of a generalized linear and non-linear higher order Boundary Value Problems (BVPs). The proposed me...In this paper, a new approach called Power Series Approximation Method (PSAM) is developed for the numerical solution of a generalized linear and non-linear higher order Boundary Value Problems (BVPs). The proposed method is efficient and effective on the experimentation on some selected thirteen-order, twelve-order and ten-order boundary value problems as compared with the analytic solutions and other existing methods such as the Homotopy Perturbation Method (HPM) and Variational Iteration Method (VIM) available in the literature. A convergence analysis of PSAM is also provided.展开更多
An investigation is made of the magnetic Rayleigh problem where a semi_infinite plate is given an impulsive motion and thereafter moves with constant velocity in a non_Newtonian power law fluid of infinite extent. The...An investigation is made of the magnetic Rayleigh problem where a semi_infinite plate is given an impulsive motion and thereafter moves with constant velocity in a non_Newtonian power law fluid of infinite extent. The solution of this highly non_linear problem is obtained by means of the transformation group theoretic approach. The one_parameter group transformation reduces the number of independent variables by one and the governing partial differential equation with the boundary conditions reduce to an ordinary differential equation with the appropriate boundary conditions. Effect of the some parameters on the velocity u(y,t) has been studied and the results are plotted.展开更多
基于交替方向乘子法(ADMM)在分布式形式下解决主动配电系统最优潮流问题(OPF),针对分布式算法性能受到配电系统区域划分影响的问题,提出了一种基于量测数据驱动的电网分区方法,以加速优化算法的收敛速度。与传统的ADMM算法依赖于全局信...基于交替方向乘子法(ADMM)在分布式形式下解决主动配电系统最优潮流问题(OPF),针对分布式算法性能受到配电系统区域划分影响的问题,提出了一种基于量测数据驱动的电网分区方法,以加速优化算法的收敛速度。与传统的ADMM算法依赖于全局信息不同,本文引入了一致性方法来协调区域交界的平衡问题,从而实现最优潮流问题的完全分布式求解。此外,本文采用LinDistFlow(Linearized Distribution Flow)交流近似模型来应对配电网最优潮流问题的非凸性挑战。通过在不同规模的IEEE配电网案例上进行测试,验证了所提方法的有效性,且其在优化算法的迭代次数、计算时间和误差精度等性能上均优于其他分区方法。展开更多
文摘The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness, reduction rate and feed rate on expanding in diameter are analyzed and some methods to prevent expanding in diameter are given.
文摘This paper is a further study of two papers [1] and [2], which were related to Ill-Conditioned Load Flow Problems and were published by IEEE Trans. PAS. The authors of this paper have some different opinions, for example, the 11-bus system is not an ill-conditioned system. In addition, a new approach to solve Load Flow Problems, E-ψtc, is introduced. It is an explicit method;solving linear equations is not needed. It can handle very tough and very large systems. The advantage of this method has been fully proved by two examples. The authors give this new method a detailed description of how to use it to solve Load Flow Problems and successfully apply it to the 43-bus and the 11-bus systems. The authors also propose a strategy to test the reliability, and by solving gradient equations, this new method can answer if the solution exists or not.
文摘For a long time, because of the lack of investment capital and enough attentions, the overall constructions of rural power grid were far behind than the urban power grid in Chongqing Jiangbei Power Company. The low voltage problems were highlighted in the rural power grid due to the characteristics of rural power grid. Using the distribution network flow calculation method, we evaluated the low voltage problems of the rural power grid which belongs to Chongqing Jiangbei Power Company. In addition, we collected the data of distribution transformers in electricity consumption peak period. Some practical management strategies were proposed by the analysis and evaluation of potential and appeared low voltage problems.
文摘A variational formulation of the synthesis problem for plane radiating systems according to the prescribed power directivity pattern (DP) is considered. The function representing the mean-square deviation of the prescribed and synthesized power DPs and containing the additional term with squared norm of the current or field in the antenna aperture is considered as the criterion of optimization. Freedom to choose the phase DP is used to improve the proximity of the prescribed and synthesized DPs. In such formulation, the classes of non-linear problems, for which the non-uniqueness of solutions, their branching and bifurcation are characteristic, arise. The properties of solutions depend on the electric size of radiating system and prescribed power DP. From a practical point of view, the existence of different solutions creating the same or similar DPs, gives the opportunity to choose the solution that has a simpler implementation. The synthesis problems for plane radiating systems and plane arrays are considered.
文摘In this paper, a new approach called Power Series Approximation Method (PSAM) is developed for the numerical solution of a generalized linear and non-linear higher order Boundary Value Problems (BVPs). The proposed method is efficient and effective on the experimentation on some selected thirteen-order, twelve-order and ten-order boundary value problems as compared with the analytic solutions and other existing methods such as the Homotopy Perturbation Method (HPM) and Variational Iteration Method (VIM) available in the literature. A convergence analysis of PSAM is also provided.
文摘An investigation is made of the magnetic Rayleigh problem where a semi_infinite plate is given an impulsive motion and thereafter moves with constant velocity in a non_Newtonian power law fluid of infinite extent. The solution of this highly non_linear problem is obtained by means of the transformation group theoretic approach. The one_parameter group transformation reduces the number of independent variables by one and the governing partial differential equation with the boundary conditions reduce to an ordinary differential equation with the appropriate boundary conditions. Effect of the some parameters on the velocity u(y,t) has been studied and the results are plotted.
文摘基于交替方向乘子法(ADMM)在分布式形式下解决主动配电系统最优潮流问题(OPF),针对分布式算法性能受到配电系统区域划分影响的问题,提出了一种基于量测数据驱动的电网分区方法,以加速优化算法的收敛速度。与传统的ADMM算法依赖于全局信息不同,本文引入了一致性方法来协调区域交界的平衡问题,从而实现最优潮流问题的完全分布式求解。此外,本文采用LinDistFlow(Linearized Distribution Flow)交流近似模型来应对配电网最优潮流问题的非凸性挑战。通过在不同规模的IEEE配电网案例上进行测试,验证了所提方法的有效性,且其在优化算法的迭代次数、计算时间和误差精度等性能上均优于其他分区方法。
