A 28 V-half-regulated power bus topology and an integrated PCDU (Power Conditioning and Distribution Unit) were adopted to meet the energy demand for the Chang'e 4 relay satellite.This paper first introduces the m...A 28 V-half-regulated power bus topology and an integrated PCDU (Power Conditioning and Distribution Unit) were adopted to meet the energy demand for the Chang'e 4 relay satellite.This paper first introduces the mission features and composition of the PSDS (Power Supply and Distribution System) for the Chang'e 4 relay satellite.Due to this satellite's unusual orbit,operational mode and project restrictions,special analysis and design was conducted on the PSDS from the perspective of weight-reduction,power management,and reliability and so on.Extreme low temperature storage of SA (Solar Array) was considered and how the antenna affects the SA was analyzed.A new kind of high-specific-energy 45 Ah (Ampere-hour) battery cell was used for the first time.To make sure that the satellite would successfully pass the long shadow zones,a 100% DOD (Depth of Discharge) experiment was carried out on the battery.Since the sunlight is almost always available and there are very few times for the battery to charge or discharge,battery care to extend its lifetime is also discussed.PCDU is a device that integrates power conditioning and power distribution in one unit.The PCDU on Chang'e 4 relay satellite can output more power with less weight because of the adoption of a 28 V-half-regulated power bus topology which was also used for the first time and used lighter material for its mechanical framework.Experiment under low temperature on PCDU was conducted as well and a hot backup equalizing charge technique which is beneficial to keep performance of the battery is illustrated.The power distribution module,which is a module of PCDU,enhances the power utilization security by utilizing a static impedance measurement and build-in-test to avoid possible short circuits.As for EED (Electrical Explosive Device) module,a protection plug was specially designed and three switches with different functions were connected in series to prevent the EED from exploding by error.In addition,the allowable minimum EED bus voltage for each EED was evaluated in case of low battery voltage caused by the possible postponement of the launching time.Complete verification experiments on the ground were conducted to confirm the correctness of the design and on-orbit test data conformed to the expected results and theoretical calculation.The power supply and distribution system has been working normally since the day the Chang'e 4 relay satellite was launched into space.展开更多
Conventional maintenance mode for the traction power supply system(TPSS)is to perform scheduled regular maintenance activities for power supply equipment,while such maintenance mode may result in undue maintenance tas...Conventional maintenance mode for the traction power supply system(TPSS)is to perform scheduled regular maintenance activities for power supply equipment,while such maintenance mode may result in undue maintenance tasks and low efficiency due to different degradation processes of different sorts of equipment.To address this problem,this paper introduces a preventive opportunistic maintenance(POM)method for TPSS based on equipment reliability.Firstly,a POM model is established by considering the equipment reliability degradation process based on Weibull distribution.Then,by considering the total power outage time in the planned operation cycle of TPSS as the optimization objective,the optimal maintenance scheme of TPSS is formulated by iterative method of maintenance strategies.The proposed method is verified by introducing practical maintenance strategies and fault record data of the traction transformer,circuit breaker and disconnector in an actual TPSS of a railway administration.Results show that the presented method can make full use of the existing fault data to develop a POM scheme for TPSS.It can improve maintenance efficiency and reduce power outage time,providing guidance to formulate scientific maintenance strategies for TPSS.展开更多
There is a general concern that the increasing penetration of electric vehicles(EVs)will result in higher aging failure probability of equipment and reduced network reliability.The electricity costs may also increase,...There is a general concern that the increasing penetration of electric vehicles(EVs)will result in higher aging failure probability of equipment and reduced network reliability.The electricity costs may also increase,due to the exacerbation of peak load led by uncontrolled EV charging.This paper proposes a linear optimization model for the assessment of the benefits of EV smart charging on both network reliability improvement and electricity cost reduction.The objective of the proposed model is the cost minimization,including the loss of load,repair costs due to aging failures,and EV charging expenses.The proposed model incorporates a piecewise linear model representation for the failure probability distributions and utilizes a machine learning approach to represent the EV charging load.Considering two different test systems(a 5-bus network and the IEEE 33-bus network),this paper compares aging failure probabilities,service unavailability,expected energy not supplied,and total costs in various scenarios with and without the implementation of EV smart charging.展开更多
为解决电力系统中不间断电源(Uninterruptible Power Supply,UPS)调度的自动化问题,提出一种基于分布式控制的UPS调度自动化算法。在深入分析电能需求的特性和系统可靠性要求的基础上,设计分布式控制架构,并选择适用于UPS调度的分布式算...为解决电力系统中不间断电源(Uninterruptible Power Supply,UPS)调度的自动化问题,提出一种基于分布式控制的UPS调度自动化算法。在深入分析电能需求的特性和系统可靠性要求的基础上,设计分布式控制架构,并选择适用于UPS调度的分布式算法,主要包括负载预测与动态调整、分布式能量管理和故障容忍性设计,并通过全面的性能评估,验证算法的可靠性和健壮性。所提算法为UPS调度自动化提供一套全面、可靠的解决方案,有望推动电力系统智能化和效率提升。展开更多
文摘A 28 V-half-regulated power bus topology and an integrated PCDU (Power Conditioning and Distribution Unit) were adopted to meet the energy demand for the Chang'e 4 relay satellite.This paper first introduces the mission features and composition of the PSDS (Power Supply and Distribution System) for the Chang'e 4 relay satellite.Due to this satellite's unusual orbit,operational mode and project restrictions,special analysis and design was conducted on the PSDS from the perspective of weight-reduction,power management,and reliability and so on.Extreme low temperature storage of SA (Solar Array) was considered and how the antenna affects the SA was analyzed.A new kind of high-specific-energy 45 Ah (Ampere-hour) battery cell was used for the first time.To make sure that the satellite would successfully pass the long shadow zones,a 100% DOD (Depth of Discharge) experiment was carried out on the battery.Since the sunlight is almost always available and there are very few times for the battery to charge or discharge,battery care to extend its lifetime is also discussed.PCDU is a device that integrates power conditioning and power distribution in one unit.The PCDU on Chang'e 4 relay satellite can output more power with less weight because of the adoption of a 28 V-half-regulated power bus topology which was also used for the first time and used lighter material for its mechanical framework.Experiment under low temperature on PCDU was conducted as well and a hot backup equalizing charge technique which is beneficial to keep performance of the battery is illustrated.The power distribution module,which is a module of PCDU,enhances the power utilization security by utilizing a static impedance measurement and build-in-test to avoid possible short circuits.As for EED (Electrical Explosive Device) module,a protection plug was specially designed and three switches with different functions were connected in series to prevent the EED from exploding by error.In addition,the allowable minimum EED bus voltage for each EED was evaluated in case of low battery voltage caused by the possible postponement of the launching time.Complete verification experiments on the ground were conducted to confirm the correctness of the design and on-orbit test data conformed to the expected results and theoretical calculation.The power supply and distribution system has been working normally since the day the Chang'e 4 relay satellite was launched into space.
基金the National Natural Science Foundation of China under Grant(51907166)the Science and Technology Project of CHINA RAILWAY under Grant(2017J001-F&N2018G023)the Sichuan Science and Technology Program under Grant(2018GZ0020).
文摘Conventional maintenance mode for the traction power supply system(TPSS)is to perform scheduled regular maintenance activities for power supply equipment,while such maintenance mode may result in undue maintenance tasks and low efficiency due to different degradation processes of different sorts of equipment.To address this problem,this paper introduces a preventive opportunistic maintenance(POM)method for TPSS based on equipment reliability.Firstly,a POM model is established by considering the equipment reliability degradation process based on Weibull distribution.Then,by considering the total power outage time in the planned operation cycle of TPSS as the optimization objective,the optimal maintenance scheme of TPSS is formulated by iterative method of maintenance strategies.The proposed method is verified by introducing practical maintenance strategies and fault record data of the traction transformer,circuit breaker and disconnector in an actual TPSS of a railway administration.Results show that the presented method can make full use of the existing fault data to develop a POM scheme for TPSS.It can improve maintenance efficiency and reduce power outage time,providing guidance to formulate scientific maintenance strategies for TPSS.
文摘There is a general concern that the increasing penetration of electric vehicles(EVs)will result in higher aging failure probability of equipment and reduced network reliability.The electricity costs may also increase,due to the exacerbation of peak load led by uncontrolled EV charging.This paper proposes a linear optimization model for the assessment of the benefits of EV smart charging on both network reliability improvement and electricity cost reduction.The objective of the proposed model is the cost minimization,including the loss of load,repair costs due to aging failures,and EV charging expenses.The proposed model incorporates a piecewise linear model representation for the failure probability distributions and utilizes a machine learning approach to represent the EV charging load.Considering two different test systems(a 5-bus network and the IEEE 33-bus network),this paper compares aging failure probabilities,service unavailability,expected energy not supplied,and total costs in various scenarios with and without the implementation of EV smart charging.
文摘为解决电力系统中不间断电源(Uninterruptible Power Supply,UPS)调度的自动化问题,提出一种基于分布式控制的UPS调度自动化算法。在深入分析电能需求的特性和系统可靠性要求的基础上,设计分布式控制架构,并选择适用于UPS调度的分布式算法,主要包括负载预测与动态调整、分布式能量管理和故障容忍性设计,并通过全面的性能评估,验证算法的可靠性和健壮性。所提算法为UPS调度自动化提供一套全面、可靠的解决方案,有望推动电力系统智能化和效率提升。