Research on the Power System Fault Classification Based on HHT and SVM Using Wide-area Information

A power system fault classification method based on the Hilbert-Huang transformation (HHT) and support vector machine (SVM) is proposed in this paper. According to different types of faults taking place in area and the outer area, this paper uses HHT to extract the instantaneous amplitude and Hilbert marginal spectrum of the current signal. Then a fault classifier consisting of a series of SVM classifiers that are optimized by using cross validation method is constructed. Finally, inputting the feature vector sets that are conversed by the HHT into the fault classifier, the fault type and locate the fault area will be distinguished. The simulation results show that this approach is very effective to classify the fault type especially when the sample is small.

A Complete Analytic Model for Fault Diagnosis of Power Systems

现代大规模互联电网提高了电力系统运行的稳定性和经济性,同时也给电网的故障诊断增加了难度。对电网保护配置和断路器动作规则进行深入分析,提出一种新的电网故障诊断模型——完全解析模型,并为基于此模型的故障诊断提出一种实用有效的求解方法。在完全解析模型中,故障假说（即可疑故障设备的故障情况）与保护、断路器的动作情况及拒动和误动情况一同表示成逻辑变量,而保护配置和断路器动作规则以逻辑方程组形式进行充分表达,逻辑方程组的每个解析解对应一个故障模式（设备故障状态和保护动作、断路器跳闸状态及拒动/误动情况）,是对故障情形的完整解释。本模型对故障诊断规则和保护、断路器的动作逻辑进行完全解析,并完整保留了故障设备、保护动作和断路器跳闸之间的耦合关系,克服了已有解析模型的缺陷。算例表明,保留完整耦合关系的完全解析模型可有效提高故障诊断的准确性和容错能力。

Power Transformer Fault Diagnosis Using Fuzzy Reasoning Spiking Neural P Systems

This paper presents an intelligent technique to fault diagnosis of power transformers dissolved and free gas analysis (DGA). Fuzzy Reasoning Spiking neural P systems (FRSN P systems) as a membrane computing with distributed parallel computing model is powerful and suitable graphical approach model in fuzzy diagnosis knowledge. In a sense this feature is required for establishing the power transformers faults identifications and capturing knowledge implicitly during the learning stage, using linguistic variables, membership functions with “low”, “medium”, and “high” descriptions for each gas signature, and inference rule base. Membership functions are used to translate judgments into numerical expression by fuzzy numbers. The performance method is analyzed in terms for four gas ratio (IEC 60599) signature as input data of FRSN P systems. Test case results evaluate that the proposals method for power transformer fault diagnosis can significantly improve the diagnosis accuracy power transformer.

Power Network Asymmetrical Faults Analysis Using Instantaneous Symmetrical Components

Although the application of Symmetrical Components to time-dependent variables was introduced by Lyon in 1954, for many years its application was essentially restricted to electric machines. Recently, thanks to its advantages, the Lyon transformation is also applied to power network calculation. In this paper, time-dependent symmetrical components are used to study the dynamic analysis of asymmetrical faults in a power system. The Lyon approach allows the calculation of the maximum values of overvoltages and overcurrents under transient conditions and to study network under non-sinusoidal conditions. Finally, some examples with longitudinal asymmetrical faults are illustrated.

基于深度卷积神经网络的电力系统故障预测

通过对深度卷积神经网络的深入研究,提出基于深度卷积神经网络的电力系统故障预测方法,保障系统安全运行。采用广域测量系统测量每个支路与节点,将获得的功率与关键特征值分别作为深度卷积神经网络模型输入、输出,训练这2个数据,并使用深度卷积神经网络AlexNet分析输入数据与输出数据的映射关系,建立基于深度卷积神经网络的电力系统故障预测模型,通过特征值分组、振荡模式筛选、数据预处理、模型训练和模型评估,实现电力系统运行状态评估,完成电力系统故障预测。实验结果说明:该方法的关键特征值计算结果与实际结果基本一致,可靠性高;使用正则化可提升模型泛化效果,防止模型过拟合;与其余方法的准确率和误报率指标相比,所提方法的准确率高达99.52%,误报率为1.16%,综合评价指标较高,评估效果优势显著。

Weather Prediction With Multiclass Support Vector Machines in the Fault Detection of Photovoltaic System

Since the efficiency of photovoltaic(PV) power is closely related to the weather,many PV enterprises install weather instruments to monitor the working state of the PV power system.With the development of the soft measurement technology,the instrumental method seems obsolete and involves high cost.This paper proposes a novel method for predicting the types of weather based on the PV power data and partial meteorological data.By this method,the weather types are deduced by data analysis,instead of weather instrument A better fault detection is obtained by using the support vector machines(SVM) and comparing the predicted and the actual weather.The model of the weather prediction is established by a direct SVM for training multiclass predictors.Although SVM is suitable for classification,the classified results depend on the type of the kernel,the parameters of the kernel,and the soft margin coefficient,which are difficult to choose.In this paper,these parameters are optimized by particle swarm optimization(PSO) algorithm in anticipation of good prediction results can be achieved.Prediction results show that this method is feasible and effective.

灾害天气下计及一二次设备耦合故障的电网短时风险评估

灾害天气下电网发生短时多重故障有可能超出保护系统预设的反应能力,一二次设备耦合影响将助推多重故障风险发展和蔓延。为此,提出了计及一二次设备耦合故障的短时风险评估方法。首先,分析了一次设备与二次设备之间的交互作用及其对电网短时运行风险的影响。其次,构建了一次设备和二次设备的故障概率模型,重点分析了一二次设备耦合故障引发保护拒动的概率。然后,结合保护系统对超预期故障的反应能力,提出了灾害天气下电网短时多重故障风险评估方法。最后,采用改造的IEEE39节点系统对所提方法进行测试。算例结果表明:受外界气象环境影响,保护系统缺陷暴露导致非期望动作使得电网多重故障风险更为严重;综合考虑灾害天气对一二次设备影响下的短时运行风险,对于发现和消除保护系统薄弱环节及制定电网降风险运行策略具有一定参考价值。

Energy-Efficient Deterministic Fault-Tolerant Scheduling for Embedded Real-Time Systems

By combining fault-tolerance with power management, this paper developed a new method for aperiodic task set for the problem of task scheduling and voltage allocation in embedded real-time systems. The scbedulability of the system was analyzed through checkpointing and the energy saving was considered via dynamic voltage and frequency scaling. Simulation results showed that the proposed algorithm had better performance compared with the existing voltage allocation techniques. The proposed technique saves 51.5% energy over FT-Only and 19.9% over FT ＋ EC on average. Therefore, the proposed method was more appropriate for aperiodic tasks in embedded real-time systems.

基于深度置信网络的电网安全稳定控制系统故障诊断方法

安全稳定控制系统(安控系统)控制节点多、控制链条长,若因故障导致拒动或者误动,将给电网的运行造成严重危害。安控系统的故障诊断是电力系统安全稳定运行的基础。现有安控系统的故障诊断主要依赖于技术人员依据通信报文辅助判别异常原因,难以对安控系统各个环节故障进行实时诊断。为此,分析了安控系统故障的存在环节和产生原因,提取了安控系统故障特征量;建立了基于深度置信网络的安控系统故障诊断模型,提出了安控系统故障诊断方法;最后选取安控系统运行故障样本,验证了故障诊断方法的正确性。

A Compact UHF Antenna Based on Hilbert Fractal Elements and a Serpentine Arrangement for Detecting Partial Discharg

Efforts to protect electric power systems from faults have commonly relied on the use of ultra-high frequency(UHF)antennas for detecting partial discharge(PD)as a common precursor to faults.However,the effectiveness of existing UHF antennas suffers from a number of challenges such as limited bandwidth,relatively large physical size,and low detection sensitivity.The present study addresses these issues by proposing a compact microstrip patch antenna with fixed dimensions of 100 mm×100 mm×1.6 mm.The results of computations yield an optimized antenna design consisting of 2nd-order Hilbert fractal units positioned within a four-layer serpentine arrangement with a fractal unit connection distance of 3.0 mm.Specifically,the optimized antenna design achieves a detection bandwidth for which the voltage standing wave ratio is less than 2 that is approximately 97.3%of the UHF frequency range(0.3–3 GHz).Finally,a prototype antenna is fabricated using standard printed circuit board technology,and the results of experiments demonstrate that the proposed antenna is capable of detecting PD signals at a distance of 8 m from the discharge source.

考虑架构灵活重构的混合式贯通牵引供电装置应急管控与故障恢复策略

基于牵引变压器与两相交流输入至单相交流输出(两相-单相)变换单元的混合式贯通牵引供电系统(HATPSS)凭借其设备利用率高、改造成本低等优势而受到关注。然而,两相-单相变换单元作为系统中的薄弱环节,其任意端口故障会导致系统出现负序电流与功率缺失等问题,严重者将引发整个贯通系统失稳。此外,受HATPSS供电架构特殊性及其控制目标多样性的影响,传统牵引系统冗余备用方案与应急管控技术适用性差等问题突出。鉴于此,该文针对两相-单相变换单元的输入/输出端故障工况,综合考虑牵引站中既有设备应急管控潜能与两相-单相变换单元控制自由度的特点,分别提出面向HATPSS的应急管控与故障恢复策略。仅通过牵引变压器、联络开关、两相-单相变换单元等系统既有装置间的协同配合,实现在不同故障工况下HATPSS额定功率运行与负序电流抑制。最后,仿真与实验验证了在不同工况下该文所提应急管控策略的可行性与有效性。

Fuzzy Fault Tree Analysis for Fault Diagnosis of Cannula Fault in Power Transformer

Being one of the most expensive components of an electrical power plant, the failures of a power transformer can result in serious power system issues. So fault diagnosis for power transformer is highly important to ensure an uninterrupted power supply. Due to information transmission mistakes as well as arisen errors while processing data in surveying and monitoring state information of transformer, uncertain and incomplete information may be produced. Based on these points, this paper presents an intelligent fault diagnosis method of power transformer using fuzzy fault tree analysis (FTA) and beta distribution for failure possibility estimation. By using the technique we proposed herein, the continuous attribute values are transformed into the fuzzy numbers to give a realistic estimate of failure possibility of a basic event in FTA. Further, it explains a new approach based on Euclidean distance between fuzzy numbers, to rank the basic events in accordance with their Fuzzy Importance Index.

The Research of Voltage Sag and Power Frequency Overvoltage on 110kV Resistance Grounding System

This paper researches the voltage transfer characteristics when one-phase ground fault occurred in the resistance grounding system, by using the theory of the asymmetric variable characteristics and the sequence network analysis of the -11 transformer, and concludes the scope of voltage sag and swell and the degree of power frequency overvoltage and their influencing factors in the 110 kV resistance grounding system. Accordingly this paper puts forward the resistance choosing principle: the resistance grounding coefficient must be equal to or greater than 10. So it can not only wipe out the voltage sag and voltage swell but also make sure the overvoltage is limited to electrical equipment allowing range. The method mentioned above is verified by simulation results of a 110 kV power system in ATP.

AN INTERNATIONAL VIEW OF DIFFERENT APPROACHES FOR FAULTS DETECTION AND IDENTIFICATION IN NUCLEAR POWER PLANTS

An extensive survey of computer based systems that apply different approaches for faults diagnostics and identifications in nuclear power plants (NPPs) was presented. In the light of reviewed material, the classification criteria were developed. The classification of computational techniques (class of computing devices, class of programming languages, and simulation programs) was discussed. The classification of theoretical aspects applied (brief aspects, and detailed aspects) in computer based diagnostic systems were established. The classification of metholology applied (symbolic reasoning methodology, event based methodology, and function based methodology) in the diagnostic systems was also depicted. In the end, the personal comments on the reviewed material, and scope of the study were described.

基于功角轨迹灵敏度的交直流电网振荡抑制优化

高压直流线路稳态功率影响交直流互联系统功角稳定性。为抑制同步发电机功角振荡,基于功角轨迹灵敏度,提出对故障前直流功率的优化方法。建立交直流系统轨迹灵敏度解析表达,引入中间变量确定功角和稳态直流功率关系。推导潮流解对稳态直流功率的灵敏度,计算轨迹灵敏度初值。基于时域仿真中网络约束方程,推导含直流变量的不平衡项。以功角差最小为目标,提出稳态直流功率优化模型,采用内点法求解。仿真结果验证了所提算法对功角振荡的抑制效果。

基于主动探测原理的直流配电线路短路故障测距

为克服对端系统助增作用的影响,实现直流配电线路短路故障的准确测距,提出一种主动探测式的故障测距原理。故障发生后,设计限流策略限制短路电流,进而切换至主动探测控制策略下,向直流线路注入特征频率探测信号。根据特征频率下故障等效电路的激励与响应特性,构建故障测距方程,实现了基于故障分析法的单端量故障测距。基于PSCAD电磁暂态仿真软件搭建了对应模型,仿真验证了不同故障位置和故障过渡电阻情况下测距原理的性能,采用特征频率探测信号构建测距方程,克服了对端电源助增作用的影响,测距结果的相对误差在0.5%以内。

构网逆变电源故障穿越控制策略及其对保护影响的研究综述

构网(grid-forming,GFM)逆变电源(inverter-based resources,IBRs)可模拟传统同步电机行为,自主提供电压以及惯量支撑,是实现高比例新能源接入电网的必然途径。继电保护是保障电力系统安全稳定运行的第一道防线,其动作性能取决于对系统故障特征的辨识能力,而构网逆变电源主导下电力系统的故障特征则与逆变电源的物理极限和控制策略高度相关。该文首先梳理了典型构网逆变电源在正常及故障穿越时的控制策略及特点;进而归纳了电源的简化等值模型及故障特性分析研究成果;最后,总结了构网型逆变电源并网系统相关的保护技术研究现状,初步评述了构网逆变电源对当前保护技术的影响以及该领域未来所面临的问题。

基于门控循环注意力网络的配电网故障识别方法

为了提高小样本条件下配电网故障辨识准确率,提出一种门控循环注意力网络模型.首先,通过注意力机制赋予故障相中关键周期较高权重,通过加权运算使得模型更加关注上述关键信息.其次,利用门控循环网络处理波形序列,该网络利用门控信号控制记忆传递过程,并借由记忆传递建立序列中不同阶段输入波形和故障类别概率间的关系,从而提升识别准确率.基于仿真数据和实际数据的实验均表明:所提方法在小样本条件下的可靠性和准确率远优于同等条件下支持向量机、梯度提升决策树、卷积神经网络等常用分类模型,为配电网故障辨识技术提供了一种新思路.

基于故障树和产生式规则的故障诊断专家系统设计

[目的]为充分运用核动力装置的运行管理经验辅助核动力操纵人员进行故障诊断,设计一种船用核动力装置故障诊断专家系统。[方法]首先,根据故障树与产生式规则之间的逻辑一致性,提出一种将故障树知识转化为产生式规则的方法;然后,对采用正、反向混合推理方法的专家系统知识库和推理机进行优化设计,并依据故障树最小割集和重要度分析结果设计正向推理策略以简化推理流程;最后,根据人工对故障状态判断的思路设计状态监测模块,实时采集关键设备参数以转化为专家系统可识别的设备信息。[结果]结果显示,采用所提方法可解决专家系统知识获取困难的问题,能在保证推理准确度的前提下提升推理效率,实现了专家系统的在线故障诊断功能。[结论]研究表明采用所提方法可提升专家系统获取知识的能力和推理效率,对保障核动力装置的运行管理安全具有重要意义。

新型电力系统下电弧故障诊断技术及发展趋势

确保电力能源安全稳定供应是构建新型电力系统的前提,用电安全领域故障诊断技术需要不断革新和进步,以适应电力系统的新需求。故障电弧无法精准诊断作为制约电气火灾监测预防的主要原因,严重威胁到供用电安全。文中分析了基于不同原理的故障电弧诊断方法,介绍了故障电弧试验检测技术及相关标准,并提出了未来可能的研究方向,最后总结了新型电力系统下电弧故障诊断面临的技术挑战和发展趋势。