Power Transformer Fault Diagnosis Using Fuzzy Reasoning Spiking Neural P Systems

This paper presents an intelligent technique to fault diagnosis of power transformers dissolved and free gas analysis (DGA). Fuzzy Reasoning Spiking neural P systems (FRSN P systems) as a membrane computing with distributed parallel computing model is powerful and suitable graphical approach model in fuzzy diagnosis knowledge. In a sense this feature is required for establishing the power transformers faults identifications and capturing knowledge implicitly during the learning stage, using linguistic variables, membership functions with “low”, “medium”, and “high” descriptions for each gas signature, and inference rule base. Membership functions are used to translate judgments into numerical expression by fuzzy numbers. The performance method is analyzed in terms for four gas ratio (IEC 60599) signature as input data of FRSN P systems. Test case results evaluate that the proposals method for power transformer fault diagnosis can significantly improve the diagnosis accuracy power transformer.

Study on Power Transformers Fault Diagnosis Based on Wavelet Neural Network and D-S Evidence Theory

>Transformer faults are quite complicated phenomena and can occur due to a variety of reasons.There have been several methods for transformer fault synthetic diagnosis,but each of them has its own limitations in real fault diagnosis applications.In order to overcome those shortcomings in the existing methods,a new transformer fault diagnosis method based on a wavelet neural network optimized by adaptive genetic algorithm(AGA)and an improved D-S evidence theory fusion technique is proposed in this paper.The proposed method combines the oil chromatogram data and the off-line electrical test data of transformers to carry out fault diagnosis.Based on the fusion mechanism of D-S evidence theory,the comprehensive reliability of evidence is constructed by considering the evidence importance,the outputs of the neural network and the expert experience.The new method increases the objectivity of the basic probability assignment(BPA)and reduces the basic probability assigned for uncertain and unimportant information.The case study results of using the proposed method show that it has a good performance of fault diagnosis for transformers.

Improved BP Neural Network for Transformer Fault Diagnosis

The back propagation (BP)-based artificial neural nets (ANN) can identify complicated relationships among dissolved gas contents in transformer oil and corresponding fault types, using the highly nonlinear mapping nature of the neural nets. An efficient BP-ALM (BP with Adaptive Learning Rate and Momentum coefficient) algorithm is proposed to reduce the training time and avoid being trapped into local minima, where the learning rate and the momentum coefficient are altered at iterations. We developed a system of transformer fault diagnosis based on Dissolved Gases Analysis (DGA) with a BP-ALM algorithm. Training patterns were selected from the results of a Refined Three-Ratio method (RTR). Test results show that the system has a better ability of quick learning and global convergence than other methods and a superior performance in fault diagnosis compared to convectional BP-based neural networks and RTR.

FAULT DIAGNOSIS OF ROTATING MACHINERY USING KNOWLEDGE-BASED FUZZY NEURAL NETWORK

A novel knowledge-based fuzzy neural network （KBFNN） for fault diagnosis is presented. Crude rules were extracted and the corresponding dependent factors and antecedent coverage factors were calculated firstly from the diagnostic sample based on rough sets theory. Then the number of rules was used to construct partially the structure of a fuzzy neural network and those factors were implemented as initial weights, with fuzzy output parameters being optimized by genetic algorithm. Such fuzzy neural network was called KBFNN. This KBFNN was utilized to identify typical faults of rotating machinery. Diagnostic results show that it has those merits of shorter training time and higher right diagnostic level compared to general fuzzy neural networks.

APPLICATION OF MULTI-SENSOR DATA FUSION BASED ON FUZZY NEURAL NETWORK IN ROTA TING MECHANICAL FAILURE DIAGNOSIS

At present, multi-se nsor fusion is widely used in object recognition and classification, since this technique can efficiently improve the accuracy and the ability of fault toleranc e. This paper describes a multi-sensor fusion system, which is model-based and used for rotating mechanical failure diagnosis. In the data fusion process, the fuzzy neural network is selected and used for the data fusion at report level. By comparing the experimental results of fault diagnoses based on fusion data wi th that on original separate data,it is shown that the former is more accurate than the latter.

APPLICATION OF ASSOCIATIVE MEMORY NEURAL NETWORK IN HIGH VOLTAGE TRANSMISSIONLINE FAULT DIAGNOSIS

Effective methods of enhancing the fault-tolerance property are proposed for two kinds of associative memory (AM) neural network (NN) used in high voltage transmission line fault diagnosis. For feedforward NN (FNN),the conception of 'fake attaction region' is presented to expand the attraction region artificially,and for the feedback Hopfield bidirectional AM NN (BAM-NN),the measure to add redundant neurons is taken to enhance NN's memory capacity and fault-tolerance property. Study results show that the NNs built not only can complete fault diagnosis correctly but also have fairly high fault-tolerance ability for disturbed input information sequence. Moreover FNN is a more convenient and effective method of solving the problem of power system fault diagnosis.

Fault Diagnosis of Valve Clearance in Diesel Engine Based on BP Neural Network and Support Vector Machine

Based on wavelet packet transformation(WPT), genetic algorithm(GA), back propagation neural network(BPNN)and support vector machine(SVM), a fault diagnosis method of diesel engine valve clearance is presented. With power spectral density analysis, the characteristic frequency related to the engine running conditions can be extracted from vibration signals. The biggest singular values(BSV)of wavelet coefficients and root mean square(RMS)values of vibration in characteristic frequency sub-bands are extracted at the end of third level decomposition of vibration signals, and they are used as input vectors of BPNN or SVM. To avoid being trapped in local minima, GA is adopted. The normal and fault vibration signals measured in different valve clearance conditions are analyzed. BPNN, GA back propagation neural network(GA-BPNN), SVM and GA-SVM are applied to the training and testing for the extraction of different features, and the classification accuracies and training time are compared to determine the optimum fault classifier and feature selection. Experimental results demonstrate that the proposed features and classification algorithms give classification accuracy of 100%.

Wavelet Transform and Neural Networks in Fault Diagnosis of a Motor Rotor

In the motor fault diagnosis technique, vibration and stator current frequency components of detection are two main means. This article will discuss the signal detection method based on vibration fault. Because the motor vibration signal is a non-stationary random signal, fault signals often contain a lot of time-varying, burst proper- ties of ingredients. The traditional Fourier signal analysis can not effectively extract the motor fault characteristics, but are also likely to be rich in failure information but a weak signal as noise. Therefore, we introduce wavelet packet transforms to extract the fault characteristics of the signal information. Obtained was the result as the neural network input signal, using the L-M neural network optimization method for training, and then used the BP net- work for fault recognition. This paper uses Matlab software to simulate and confirmed the method of motor fault di- agnosis validity and accuracy

A NEURAL NETWORK BASED FAULT FUZZY DIAGNOSTIC SYSTEM

A fault fuzzy diagnostic system(FFDS) based on neural network and fuzzy logic hybrid is proposed. FFDS consists of two modes: a fuzzy inference mode and a rule learning mode. The fuzzy inference rules are stored in the memory layer. The excitation levels of the memory neurons reflect the matching degrees between the input vectors and the prototype rules. In the rule learning mode, the rules can be produced automatically through the cluster process. As an application case of this diagnostic system, the fault diagnosis experiment of the rotating axis is simulated.

A REALIZATION OF FUZZY LOGIC BY A NEURAL NETWORK

This paper proposes a Fuzzy Neural Network (FNN) model, which uses a propagation algorithm. A logical operation is defined by a set of weights which are independent of inputs. The realization of the basic And,Or and Negation fuzzy logical operations is shown by the fuzzy neuron. A example in fault diagnosis is put forward and the result witnesses some effectiveness of the new FNN model.

Fault Diagnosis of Power Electronic Circuits Based on Adaptive Simulated Annealing Particle Swarm Optimization

In the field of energy conversion,the increasing attention on power electronic equipment is fault detection and diagnosis.A power electronic circuit is an essential part of a power electronic system.The state of its internal components affects the performance of the system.The stability and reliability of an energy system can be improved by studying the fault diagnosis of power electronic circuits.Therefore,an algorithm based on adaptive simulated annealing particle swarm optimization(ASAPSO)was used in the present study to optimize a backpropagation(BP)neural network employed for the online fault diagnosis of a power electronic circuit.We built a circuit simulation model in MATLAB to obtain its DC output voltage.Using Fourier analysis,we extracted fault features.These were normalized as training samples and input to an unoptimized BP neural network and BP neural networks optimized by particle swarm optimization(PSO)and the ASAPSO algorithm.The accuracy of fault diagnosis was compared for the three networks.The simulation results demonstrate that a BP neural network optimized with the ASAPSO algorithm has higher fault diagnosis accuracy,better reliability,and adaptability and can more effectively diagnose and locate faults in power electronic circuits.

A fuzzy neural network evolved by particle swarm optimization

A cooperative system of a fuzzy logic model and a fuzzy neural network(CSFLMFNN)is proposed,in which a fuzzy logic model is acquired from domain experts and a fuzzy neural network is generated and prewired according to the model.Then PSO-CSFLMFNN is constructed by introducing particle swarm optimization(PSO)into the cooperative system instead of the commonly used evolutionary algorithms to evolve the prewired fuzzy neural network.The evolutionary fuzzy neural network implements accuracy fuzzy inference without rule matching.PSO-CSFLMFNN is applied to the intelligent fault diagnosis for a petrochemical engineering equipment,in which the cooperative system is proved to be effective.It is shown by the applied results that the performance of the evolutionary fuzzy neural network outperforms remarkably that of the one evolved by genetic algorithm in the convergence rate and the generalization precision.

Employing adaptive fuzzy computing for RCP intelligent control and fault diagnosis

Loss of coolant accident(LOCA),loss of fluid accident(LOFA),and loss of vacuum accident(LOVA)are the most severe accidents that can occur in nuclear power reactors(NPRs).These accidents occur when the reactor loses its cooling media,leading to uncontrolled chain reactions akin to a nuclear bomb.This article is focused on exploring methods to prevent such accidents and ensure that the reactor cooling system remains fully controlled.The reactor coolant pump(RCP)has a pivotal role in facilitating heat exchange between the primary cycle,which is connected to the reactor core,and the secondary cycle associated with the steam generator.Furthermore,the RCP is integral to preventing catastrophic events such as LOCA,LOFA,and LOVA accidents.In this study,we discuss the most critical aspects related to the RCP,specifically focusing on RCP control and RCP fault diagnosis.The AI-based adaptive fuzzy method is used to regulate the RCP’s speed and torque,whereas the neural fault diagnosis system(NFDS)is implemented for alarm signaling and fault diagnosis in nuclear reactors.To address the limitations of linguistic and statistical intelligence approaches,an integration of the statistical approach with fuzzy logic has been proposed.This integrated system leverages the strengths of both methods.Adaptive fuzzy control was applied to the VVER 1200 NPR-RCP induction motor,and the NFDS was implemented on the Kori-2 NPR-RCP.

A Novel Real-Time Fault Diagnostic System for Steam Turbine Generator Set by Using Strata Hierarchical Artificial Neural Network

The real-time fault diagnosis system is very great important for steam turbine generator set due to a serious fault results in a reduced amount of electricity supply in power plant. A novel real-time fault diagnosis system is proposed by using strata hierarchical fuzzy CMAC neural network. A framework of the fault diagnosis system is described. Hierarchical fault diagnostic structure is discussed in detail. The model of a novel fault diagnosis system by using fuzzy CMAC are built and analyzed. A case of the diagnosis is simulated. The results show that the real-time fault diagnostic system is of high accuracy, quick convergence, and high noise rejection. It is also found that this model is feasible in real-time fault diagnosis.

Fuzzy Integral Theory and Its Application in Fault Intelligent Integrated Diagnosis

In this paper, by employing the idea of 'dispersion first, then concentration'' adhering to the biological perceptual system, an idea of the multi-symptom-domain based fault consensus diagnosis is developed. From the point of group decision-making, the method based on neural networks to realize this diagnosis idea is studied, and a particular multi-symptom-domain based diagnosis strategy is proposed, which is based on fuzzy integral theory. Finally, a case study is given. The research results show that the proposed diagnosis strategy is available and more efficient than conventional methods.

基于时频图与视觉Transformer的滚动轴承智能故障诊断方法

基于循环神经网络的故障诊断方法在计算过程中难以保存间隔时间过长的信息且无法并行计算,在大型数据建模方面存在不足,为提高轴承故障诊断工作的效率及准确性,提出了一种基于短时傅里叶变换时频图与视觉Transformer(ViT)的轴承故障诊断方法:通过短时傅里叶变换将原始振动信号转换为二维时频图像,再将时频图作为特征图输入ViT网络中进行训练,详细分析网络参数对故障诊断性能和计算复杂度的影响,构建最优模型结构,最终实现轴承的故障诊断。采用凯斯西储大学和江南大学轴承数据对模型进行验证,结果表明该模型可以有效结合短时傅里叶变换在处理时变信号方面的优势和ViT网络强大的图像分类能力,具有更高的诊断精度和更好的泛化性、通用性。

Intelligent Fault Diagnosis in Lead-zinc Smelting Process

According to the fault characteristic of the imperial smelting process （ISP）, a novel intelligent integrated fault diagnostic system is developed. In the system fuzzy neural networks are utilized to extract fault symptom and expert system is employed for effective fault diagnosis of the process. Furthermore, fuzzy abductive inference is introduced to diagnose multiple faults. Feasibility of the proposed system is demonstrated through a pilot plant case study.

Synthetic Intelligent Fault Diagnosis Technology for Complex Process

A fault diagnosis method of knowledge based fuzzy neural network is proposed for complex process, which is hard to develop practical mathematical model. Fault detection is performed through a knowledge based system, where fault detection heuristic rules have been generated from deep and shallow knowledge of the process. The fuzzy neural network performs the fault diagnosis task. This method does not need practical mathematical models of objects, so it is a strong implement for complex process.

Intelligent Process Fault Diagnosis for Nonlinear Systems with Uncertain Plant Model via Extended State Observer and Soft Computing

There have been many studies on observer-based fault detection and isolation (FDI), such as using unknown input observer and generalized observer. Most of them require a nominal mathematical model of the system. Unlike sensor faults, actuator faults and process faults greatly affect the system dynamics. This paper presents a new process fault diagnosis technique without exact knowledge of the plant model via Extended State Observer (ESO) and soft computing. The ESO’s augmented or extended state is used to compute the system dynamics in real time, thereby provides foundation for real-time process fault detection. Based on the input and output data, the ESO identifies the un-modeled or incorrectly modeled dynamics combined with unknown external disturbances in real time and provides vital information for detecting faults with only partial information of the plant, which cannot be easily accomplished with any existing methods. Another advantage of the ESO is its simplicity in tuning only a single parameter. Without the knowledge of the exact plant model, fuzzy inference was developed to isolate faults. A strongly coupled three-tank nonlinear dynamic system was chosen as a case study. In a typical dynamic system, a process fault such as pipe blockage is likely incipient, which requires degree of fault identification at all time. Neural networks were trained to identify faults and also instantly determine degree of fault. The simulation results indicate that the proposed FDI technique effectively detected and isolated faults and also accurately determine the degree of fault. Soft computing (i.e. fuzzy logic and neural networks) makes fault diagnosis intelligent and fast because it provides intuitive logic to the system and real-time input-output mapping.

基于CNN-Transformer模型的自动扶梯轴承故障诊断方法研究

针对自动扶梯滚动轴承故障诊断模型诊断识别率不高的问题,提出一种CNN与Transformer相结合的滚动轴承故障诊断方法。该方法采用CNN注意力和Transformer时域注意力融合机制,从信号的通道和时域两个维度提取最有利于识别的特征信息,降低信道和噪声等影响。根据特征信息的重要程度进行权重分配,以提升故障识别率。基于滚动轴承数据集,将所提算法模型和CNN、RNN、SVM算法进行对比。结果表明,该方法识别轴承故障的准确度更高,实现了对轴承故障的准确分类。