This paper focuses on discussing the power relations among the Hubbards from the perspective of turn-taking analysis.In it, a lot of work about the quantitative turn-taking analysis has been done. And the mentioned da...This paper focuses on discussing the power relations among the Hubbards from the perspective of turn-taking analysis.In it, a lot of work about the quantitative turn-taking analysis has been done. And the mentioned data reflects that there is a close relationship between power and turn-taking.展开更多
The power relations in the TV program called If You Are the One will be explored from the perspective of the turns of different speakers on the different positions,such as the host,male guests,female guests and two co...The power relations in the TV program called If You Are the One will be explored from the perspective of the turns of different speakers on the different positions,such as the host,male guests,female guests and two commentators.Using both quantitative and qualitative methods,the reversion of the program,updated on June 9,2018 on the internet,is sampled.Then,the analyses on respective turns of different speakers are from two main perspectives of the turn-constructional component and turn-allocation component.The results show that the host has more power than others and the role two commentators play in the program is very important.Analyzing the power relations in these conversations of the program helps readers more positively and effectively understand the operation mechanism of this program after reversion.展开更多
Laser assisted machining (LAM) has difficulties in estimating temperature after applying a LAM process due to its very small heat input area, large energy and movement. In particular, in the case of laser assisted tur...Laser assisted machining (LAM) has difficulties in estimating temperature after applying a LAM process due to its very small heat input area, large energy and movement. In particular, in the case of laser assisted turning (LAT) process, it is more difficult to estimate the temperature after preheating because it has a shape of ellipse when a laser heat source is rotated. A prediction method and thermal analysis method for heat source shapes were proposed as a square shaped member was preheated. The temperature distribution was calculated according to the rotation of the member. Compared with the results of the former study, the maximum temperature of the calculation results, 1 407.1 °C, is 8.5 °C higher than that of the square member, which is 1 398.6 °C. In a LAT process for a square member, the maximum temperature is 1 850.8 °C. It is recognized that a laser power control process is required because square members show a maximum temperature that exceeds a melting temperature at around a vertex of the member according to the rotation.展开更多
文摘This paper focuses on discussing the power relations among the Hubbards from the perspective of turn-taking analysis.In it, a lot of work about the quantitative turn-taking analysis has been done. And the mentioned data reflects that there is a close relationship between power and turn-taking.
文摘The power relations in the TV program called If You Are the One will be explored from the perspective of the turns of different speakers on the different positions,such as the host,male guests,female guests and two commentators.Using both quantitative and qualitative methods,the reversion of the program,updated on June 9,2018 on the internet,is sampled.Then,the analyses on respective turns of different speakers are from two main perspectives of the turn-constructional component and turn-allocation component.The results show that the host has more power than others and the role two commentators play in the program is very important.Analyzing the power relations in these conversations of the program helps readers more positively and effectively understand the operation mechanism of this program after reversion.
基金Project(70004782)supported by the Regional Strategic Technology Development Program of the Ministry of Knowledge Economy(MKE),KoreaProject(2011-0017407)supported by National Research Foundation(NRF)of KoreaWork financially supported by the Second Stage of Brain Korea 21 Projects
文摘Laser assisted machining (LAM) has difficulties in estimating temperature after applying a LAM process due to its very small heat input area, large energy and movement. In particular, in the case of laser assisted turning (LAT) process, it is more difficult to estimate the temperature after preheating because it has a shape of ellipse when a laser heat source is rotated. A prediction method and thermal analysis method for heat source shapes were proposed as a square shaped member was preheated. The temperature distribution was calculated according to the rotation of the member. Compared with the results of the former study, the maximum temperature of the calculation results, 1 407.1 °C, is 8.5 °C higher than that of the square member, which is 1 398.6 °C. In a LAT process for a square member, the maximum temperature is 1 850.8 °C. It is recognized that a laser power control process is required because square members show a maximum temperature that exceeds a melting temperature at around a vertex of the member according to the rotation.
