Based on the development,evolution,and current status of aircraft power-by-wire actuation technology both domestically and internationally,this paper highlights the primary features of this technology and the crucial ...Based on the development,evolution,and current status of aircraft power-by-wire actuation technology both domestically and internationally,this paper highlights the primary features of this technology and the crucial techniques linked to its core control functionalities.By considering the current trends in technology and future market demands,an outlook on the future progress of aircraft power-by-wire actuation control technology in China,including multi-disciplinary integration,cutting-edge research and design methodologies,and challenges and goals is also provided.展开更多
For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous act...For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.展开更多
Eleven groups of wire bonding experiments are carried out on an experiment platform （restructured with a U3000 heavy aluminum wedge wire bonder）. Pure silicon aluminum wire （300 μm in diameter, 2.94-3.92 N in aver...Eleven groups of wire bonding experiments are carried out on an experiment platform （restructured with a U3000 heavy aluminum wedge wire bonder）. Pure silicon aluminum wire （300 μm in diameter, 2.94-3.92 N in average pull force） and nickel coated aluminum substrates are used in the experiments. During the experiment process, only ultrasonic power rate parameter is changed and the other bonding parameters are kept as constant, The bonding force and time are 4.90 N and 100 ms respectively. After the bonding experiments, shear strength tests are carried out on the bonds as the bonding strength criterion. From those experiments and test results, some conclusions are obtained： In the small ultrasonic power rate conditions （about 20%-30%）, with the power increasing, the bonding strength enhances accordingly; However, in the large ultrasonic power rate conditions （about 45%-70%）, the bonding strength decreases accordingly and over bonding happens. Only when the ultrasonic power rate is in a moderate condition （about 35%-40%） can good and stabilized bonding strength be acquired.展开更多
文摘Based on the development,evolution,and current status of aircraft power-by-wire actuation technology both domestically and internationally,this paper highlights the primary features of this technology and the crucial techniques linked to its core control functionalities.By considering the current trends in technology and future market demands,an outlook on the future progress of aircraft power-by-wire actuation control technology in China,including multi-disciplinary integration,cutting-edge research and design methodologies,and challenges and goals is also provided.
文摘For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.
基金This project is supported by National Natural Science Foundation of China (No.50390064)National Basic Research Program of China(973 Program,No.2003CB716202).
文摘Eleven groups of wire bonding experiments are carried out on an experiment platform （restructured with a U3000 heavy aluminum wedge wire bonder）. Pure silicon aluminum wire （300 μm in diameter, 2.94-3.92 N in average pull force） and nickel coated aluminum substrates are used in the experiments. During the experiment process, only ultrasonic power rate parameter is changed and the other bonding parameters are kept as constant, The bonding force and time are 4.90 N and 100 ms respectively. After the bonding experiments, shear strength tests are carried out on the bonds as the bonding strength criterion. From those experiments and test results, some conclusions are obtained： In the small ultrasonic power rate conditions （about 20%-30%）, with the power increasing, the bonding strength enhances accordingly; However, in the large ultrasonic power rate conditions （about 45%-70%）, the bonding strength decreases accordingly and over bonding happens. Only when the ultrasonic power rate is in a moderate condition （about 35%-40%） can good and stabilized bonding strength be acquired.
