The gassed power demand and volumetric mass transfer coefficient （kca） were investigated in a fully baffled, dished-base stirred vessel with a diameter of 0.30 m agitated by five triple-impeller combinations. Six ty...The gassed power demand and volumetric mass transfer coefficient （kca） were investigated in a fully baffled, dished-base stirred vessel with a diameter of 0.30 m agitated by five triple-impeller combinations. Six types of impellers （six-half-elliptical-blade disk turbine （HEDT）, four-wide-blade hydrofoil impeller （WH） pumping down （D） and pumping up （U）, parabolic-blade disk turbine （PDT）, and CBY narrow blade （N） and wide blade （W）） were used to form five combinations identified by PDT ＋ 2CBYN, PDT ＋ 2CBYw, PDT ＋ 2WHD, HEDT ＋ 2WHD and HEDT ＋ 2WHo, respectively. The results show that the relative power demand of HEDT ＋ 2WHu is higher than that of other four impeller combinations under all operating conditions. At low superficial gas velocity （uc）, kLa differences among impeller combinations are not obvious. However when UG iS high, PDT ＋ 2WHD shows the best mass transfer performance and HEDT ＋ 2WHu shows the worst mass trans- fer performance under all operating conditions. At high uc and a given power input, the impeller combinations with high agitation speed and big projection cross-sectional area lead to relatively high values of kLa. Based on the experimental data, the regressed correlations of gassed power number with Froude number and gas flow number, and kLa with power consumption and superficial gas velocity are obtained for five different impeller combinations, which could be used as guidance for industrial design.展开更多
基金Supported by the National Natural Science Foundation of China(21206002,21376016)
文摘The gassed power demand and volumetric mass transfer coefficient （kca） were investigated in a fully baffled, dished-base stirred vessel with a diameter of 0.30 m agitated by five triple-impeller combinations. Six types of impellers （six-half-elliptical-blade disk turbine （HEDT）, four-wide-blade hydrofoil impeller （WH） pumping down （D） and pumping up （U）, parabolic-blade disk turbine （PDT）, and CBY narrow blade （N） and wide blade （W）） were used to form five combinations identified by PDT ＋ 2CBYN, PDT ＋ 2CBYw, PDT ＋ 2WHD, HEDT ＋ 2WHD and HEDT ＋ 2WHo, respectively. The results show that the relative power demand of HEDT ＋ 2WHu is higher than that of other four impeller combinations under all operating conditions. At low superficial gas velocity （uc）, kLa differences among impeller combinations are not obvious. However when UG iS high, PDT ＋ 2WHD shows the best mass transfer performance and HEDT ＋ 2WHu shows the worst mass trans- fer performance under all operating conditions. At high uc and a given power input, the impeller combinations with high agitation speed and big projection cross-sectional area lead to relatively high values of kLa. Based on the experimental data, the regressed correlations of gassed power number with Froude number and gas flow number, and kLa with power consumption and superficial gas velocity are obtained for five different impeller combinations, which could be used as guidance for industrial design.
