Frequentist and Bayesian Sample Size Determination for Single-Arm Clinical Trials Based on a Binary Response Variable: A Shiny App to Implement Exact Methods

Sample size determination typically relies on a power analysis based on a frequentist conditional approach. This latter can be seen as a particular case of the two-priors approach, which allows to build four distinct power functions to select the optimal sample size. We revise this approach when the focus is on testing a single binomial proportion. We consider exact methods and introduce a conservative criterion to account for the typical non-monotonic behavior of the power functions, when dealing with discrete data. The main purpose of this paper is to present a Shiny App providing a user-friendly, interactive tool to apply these criteria. The app also provides specific tools to elicit the analysis and the design prior distributions, which are the core of the two-priors approach.

A power function model for simulating creep mechanical properties of salt rock

In this paper,a new micro-creep model of salt rock is proposed based on a linear parallel bonded model(LPBM)using the two-dimensional particle flow code(PFC2D).The power function weakening form is assumed to describe the variation of the parallel bonded diameter(PBD)over time.By comparing with the parallel-bonded stress corrosion(PSC)model,a smaller stress fluctuation and smoother creep strain−time curves can be obtained by this power function model at the same stress level.The validity and adaptability of the model to simulate creep deformation of salt rock are verified through comparing the laboratory creep test curves and the Burgers model fitting result.The numerical results reveal that this model can be capable of capturing the creep deformation and damage behavior from the laboratory observations.

The invariant of the stiffness filter function with the weight filter function of the power function form

Based on the independent, continuous and map- ping （ICM） method and homogenization method, a research model is constructed to propose and deduce a theorem and corollary from the invariant between the weight filter func- tion and the corresponding stiffness filter function of the form of power function. The efficiency in searching for op- timum solution will be raised via the choice of rational filter functions, so the above mentioned results are very important to the further study of structural topology optimization.

General solutions of plane problem for power function curved cracks

A new exact and universal conformal mapping is proposed. Using Muskhelishvili＇s complex potential method, the plane elasticity problem of power function curved cracks is investigated with an arbitrary power of a natural number, and the general solutions of the stress intensity factors （SIFs） for mode I and mode II at the crack tip are obtained under the remotely uniform tensile loads. The present results can be reduced to the well-known solutions when the power of the function takes different natural numbers. Numerical examples are conducted to reveal the effects of the coefficient, the power, and the projected length along the x-axis of the power function curved crack on the SIFs for mode I and mode II.

Control Charts for the Shape Parameter of Power Function Distribution under Different Classical Estimators

In practice,the control charts for monitoring of process mean are based on the normality assumption.But the performance of the control charts is seriously affected if the process of quality characteristics departs from normality.For such situations,we have modified the already existing control charts such as Shewhart control chart,exponentially weighted moving average(EWMA)control chart and hybrid exponentially weighted moving average(HEWMA)control chart by assuming that the distribution of underlying process follows Power function distribution(PFD).By considering the situation that the parameters of PFD are unknown,we estimate them by using three classical estimation methods,i.e.,percentile estimator(P.E),maximum likelihood estimator(MLE)and modified maximum likelihood estimator(MMLE).We construct Shewhart,EWMA and HEWMA control charts based on P.E,MLE and MMLE.We have compared all these control charts using Monte Carlo simulation studies and concluded that HEWMA control chart under MLE is more sensitive to detect an early shift in the shape parameter when the distribution of the underlying process follows power function distribution.

The Analytic Solution of Schrdinger Equation with Potential Function Superposed by Six Terms with Positive-power and Inverse-power Potentials

The analytic solution of the radial Schrodinger equation is studied by using the tight coupling condition of several positive-power and inverse-power potential functions in this article. Furthermore, the precisely analytic solutions and the conditions that decide the existence of analytic solution have been searched when the potential of the radial Schrodinger equation is V（r） =α1r^8 ＋α2r^3 ＋ α3r^2 ＋β3r^-1 ＋β2r^-3 ＋β1r6-4. Generally speaking, there is only an approximate solution, but not analytic solution for SchrSdinger equation with several potentials＇ superposition. However, the conditions that decide the existence of analytic solution have been found and the analytic solution and its energy level structure are obtained for the Schrodinger equation with the potential which is motioned above in this paper. According to the single-value, finite and continuous standard of wave function in a quantum system, the authors firstly solve the asymptotic solution through the radial coordinate r → ∞ and r →0; secondly, they make the asymptotic solutions combining with the series solutions nearby the neighborhood of irregular singularities; and then they compare the power series coefficients, deduce a series of analytic solutions of the stationary state wave function and corresponding energy level structure by tight coupling among the coefficients of potential functions for the radial SchrSdinger equation; and lastly, they discuss the solutions and make conclusions.

Analysis of Stability and Large Deflection Buckle of Rolled Strip by Third Power B-Spline Function Method

A new method——the third power B-spline function method is developed to analyse the stability and the buckle of rolled strip under residual stress.The large deflection theory of thin plate is used to calculate the buckle of rolled strip and criterion of critical buckle is given.The computed results tally with those of experiment well,which provides theoretical basis and method for developing the mathematical model of flatness control.

On the Solutions of an Equation Involving the Smarandache Power Function SP（n）

For any positive integer n, the famous Smarandache power function SP（n） is defined as the smallest positive integer m such that n｜m^m, where m and n have the same prime divisors. The main purpose of this paper is using the elementary methods to study the positive integer solutions of an equation involving the Smarandache power function SP（n） and obtain some interesting results. At the same time, we give an open problem about the related equation.

Elastodynamic solution for plane-strain response of functionally graded thick hollow cylinders by analytical method

An elastodynamic solution for plane-strain response of functionally graded thick hollow cylinders subjected to uniformly-distributed dynamic pressures at boundary surfaces is presented. The material properties, except Poisson＇s ratio, are assumed to vary through the thickness according to a power law function. To achieve an exact solution, the dynamic radial displacement is divided into two quasi-static and dynamic parts, and for each part, an analytical solution is derived. The quasi-static solution is obtained by means of Euler＇s equation, and the dynamic solution is derived using the method of the separation of variables and the orthogonal expansion technique. The radial displacement and stress distributions are plotted for various functionally graded material （FGM） hollow cylinders under different dynamic loads, and the advantages of the presented method are discussed. The proposed analytical solution is suitable for analyzing various arrangements of hollow FGM cylinders with arbitrary thickness and arbitrary initial conditions, which are subjected to arbitrary forms of dynamic pressures distributed uniformly on their boundary surfaces.

Comments on “General solutions of plane problem for power function curved cracks”

An error has been found in Ref. [1]. In the case of n = 2, authors of Ref. [1] suggested the following conformal mapping function：

Series Representation of Power Function

This paper presents the way to make expansion for the next form function: to the numerical series. The most widely used methods to solve this problem are Newtons Binomial Theorem and Fundamental Theorem of Calculus (that is, derivative and integral are inverse operators). The paper provides the other kind of solution, except above described theorems.

The Separation of Powers from Functions and the Establishment of a New Structure of Management and Operation of State-owned Assets

The development of the socialist market economy demands the furtherintensification of the reform of the management operating system (MOS)of the state-owned assets, the strengthening of the efficiency in the man-agement of state-owned assets,and the improvement of the operating bene-

Study on Prediction Method of Structural Three-parameter Power Function P-S-N Curve

This paper applies weighted least square method to estimate the three-parameter power function equation of the fatigue life curve, and uses comprehensive fatigue life coefficient to correct the equation, and at the same time combines probability statistics method to bring out the prediction method of structure＇s three- parameter power function P-S-N curve, finally applies the prediction method to a ship＇s frame-type elevate, based on the fatigue test data of it＇s material-SA06 aluminium alloy, to obtain it＇s structure＇s three-parameter power function P-S-N curve. Compared with the conventional least square method, the presented method can give

Polynomial Functions Composed of Terms with Non-Integer Powers

Polynomial functions containing terms with non-integer powers are studied to disclose possible approaches for obtaining their roots as well as employing them for curve-fitting purposes. Several special cases representing equations from different categories are investigated for their roots. Curve-fitting applications to physically meaningful data by the use of fractional functions are worked out in detail. Relevance of this rarely worked subject to solutions of fractional differential equations is pointed out and existing potential in related future work is emphasized.

Unit 1 of Ling’ao Nuclear Power Plant phase II underwent hot functional test successfully

On February 25, the Unit 1 of Ling’ao Nuclear Power Plant phase II underwent a 41-day-long hot functional test successfully with its major systems satisfying the requirements for

The relationships among structure variables of larch forests in China

Background:Larch(Larix Mill.)forests are widely distributed in the upper parts of mountainous areas in China,playing vital roles in constructing mountain landscapes and maintaining mountain environments.Despite their importance,our knowledges on the large-scale patterns of structure characteristics and the relationships between different structure variables are unclear.In this paper,we investigated 155 plots from 11 natural larch forest types across the country to explore the biogeographic patterns of the structure characteristics and the allometric relationships between different structure variables for Chinese larch forests.Results:The structure characteristics were significantly different among larch forest types.For different larch forest types,the power function fits the relationships between tree height and diameter at breast height(DBH),average DBH and stem density,and taper and stem density well,but with different exponents among larch forest types.The power exponents of the allometric relationships between tree height and DBH for different larch forest types varied from 0.61 to 0.93(mean=0.86)by standard major axis regression(SMA),and from 0.51 to 0.78(mean=0.56)by ordinary least square regression(OLS).The 50%,75%and 95%quantile regression(QR)and OLS indicated that the average DBH and taper of the L.gmelinii forests,L.gmelinii var.principis-rupprechtii forests,and L.sibirica forests were significantly correlated with stem density.Conclusions:The relationship between tree height and DBH showed a power function relationship for all larch forest types in China,but with different exponents.Overall,stem density was negatively correlated with average DBH and taper.The Sect.Larix forests exhibited stand density effect.Our findings provide an important basis for recognizing the biogeographic patterns of structure factors and for the management of larch forests in China.

Beach Profiles Characteristics Along Giao Thuy and Hai Hau Coasts,Vietnam:A Field Study

Giao Thuy and Hai Hau coasts are located in Nam Dinh province, Vietnam, with a total coastline of 54.42 km in length. The sea-dike system has been seriously damaged and there have been many dike breaches which caused floods and losses. This situation is considered of a general representative for coastal area in the northern part of Vietnam. A variety of studies have shown that the gradient in the longshore sediment transport rate and the offshore fine sediment lost are the main mechanisms causing the beach erosion. This study presents a field investigation of the beach profiles at Giao Thuy and Hai Hau beaches. Three types of empirical functions for the equilibrium beach profile are applied and compared with the observations. Results show that all observed beach profiles can be described by a single function. However, one specific equilibrium profile equation is not sufficient to assess all beach profiles. In Section 1 of Giao Thuy and Section 3 of Hai Thinh beaches, beach profiles are consistent with the logarithmic function, while the exponential function fits well in Section 2. This difference is explained with respect to coastal morphology, sediment characteristics and hydrodynamic conditions which vary in site. An analysis of the validity of the beach profile functions is recommended for the numerical modeling and engineering designs in this area.

Transverse Distributions of Front and Back Tension Stresses in Cold Strip Rolling

In this paper,such a new lateral displacement function is proposed that the lateral flow velocity is con- tinuous at the entry and the exit of deformation zone.A new kind of finite strip method—the third power B-spline finite strip method—is put forward to simulate strip rolling process.Front and back tension stresses are formulated.The computed results of the transverse distributions of the front and back tension stresses are close to the experimental results.The paper lays a foundation for further analysing the three-dimensional stresses and deformations of strip rolling.

‘Relationships between relationships’ in forest stands: intercepts and exponents analyses

Relationships between diameter at breast height(dbh) versus stand density, and tree height versus dbh(height curve) were explored with the aim to find if there were functional links between correspondent parameters of the relationships, exponents and intercepts of their power functions. A geometric model of a forest stand using a conic approximation suggested that there should be interrelations between correspondent exponents and intercepts of the relationships. It is equivalent to a type of ‘relationship between relationships’ that might exist in a forest stand undergoing self-thinning, and means that parameters of one relationship may be predicted from parameters of another. The predictions of the model were tested with data on forest stand structure from published databases that involved a number of trees species and site quality levels. It was found that the correspondent exponents and intercepts may be directly recalculated from one another for the simplest case when the total stem surface area was independent of stand density. For cases where total stem surface area changes with the drop of density, it is possible to develop a generalization of the model in which the interrelationships between correspondent parameters(exponents and intercepts) may be still established.

RECURSIVE REPRODUCING KERNELS HILBERT SPACES USING THE THEORY OF POWER KERNELS

The main objective of this work is to decompose orthogonally the reproducing kernels Hilbert space using any conditionally positive definite kernels into smaller ones by introducing the theory of power kernels, and to show how to do this decomposition recur- sively. It may be used to split large interpolation problems into smaller ones with different kernels which are related to the original kernels. To reach this objective, we will reconstruct the reproducing kernels Hilbert space for the normalized and the extended kernels and give the recursive algorithm of this decomposition.