Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries(AZMBs)are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc(Zn) metal. However,several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries(AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

Regulating the Solvation Structure of Li^(+) Enables Chemical Prelithiation of Silicon-Based Anodes Toward High-Energy Lithium-Ion Batteries

The solvation structure of Li^(+) in chemical prelithiation reagent plays a key role in improving the low initial Coulombic efficiency(ICE) and poor cycle performance of silicon-based materials. Never theless, the chemical prelithiation agent is difficult to dope active Li^(+) in silicon-based anodes because of their low working voltage and sluggish Li^(+) diffusion rate. By selecting the lithium–arene complex reagent with 4-methylbiphenyl as an anion ligand and 2-methyltetrahydrofuran as a solvent, the as-prepared micro-sized Si O/C anode can achieve an ICE of nearly 100%. Interestingly, the best prelithium efficiency does not correspond to the lowest redox half-potential(E_(1/2)), and the prelithiation efficiency is determined by the specific influencing factors(E_(1/2), Li^(+) concentration, desolvation energy, and ion diffusion path). In addition, molecular dynamics simulations demonstrate that the ideal prelithiation efficiency can be achieved by choosing appropriate anion ligand and solvent to regulate the solvation structure of Li^(+). Furthermore, the positive effect of prelithiation on cycle performance has been verified by using an in-situ electrochemical dilatometry and solid electrolyte interphase film characterizations.

Advances in the structure design of substrate materials for zinc anode of aqueous zinc ion batteries

Aqueous zinc ion batteries(AZIBs) demonstrate tremendous competitiveness and application prospects because of their abundant resources,low cost, high safety, and environmental friendliness. Although the advanced electrochemical energy storage systems based on zinc ion batteries have been greatly developed, many severe problems associated with Zn anode impede its practical application, such as the dendrite formation,hydrogen evolution, corrosion and passivation phenomenon. To address these drawbacks, electrolytes, separators, zinc alloys, interfacial modification and structural design of Zn anode have been employed at present by scientists. Among them, the structural design for zinc anode is relatively mature, which is generally believed to enhance the electroactive surface area of zinc anode, reduce local current density, and promote the uniform distribution of zinc ions on the surface of anode. In order to explore new research directions, it is crucial to systematically summarize the structural design of anode materials. Herein, this review focuses on the challenges in Zn anode, modification strategies and the three-dimensional(3D) structure design of substrate materials for Zn anode including carbon substrate materials, metal substrate materials and other substrate materials. Finally, future directions and perspectives about the Zn anode are presented for developing high-performance AZIBs.

Unraveling the reaction reversibility and structure stability of nickel sulfide anodes for lithium ion batteries

The electrochemical performance of lithium-ion batteries,i.e.specific capacity and cyclability,is primarily determined by chemical reversibility and structural stability of the electrodes in cycling.Here we have investigated the fundamental reaction behaviors of nickel sulfide(NixSy)as lithium-ion battery anodes by in-situ TEM.We find that Ni_(3)S_(2)is the electrochemically stable phase,which appears in the first cycle of the NixSyanode.From the second cycle,conversion between Ni_(3)S_(2)and Li_(2)S/Ni is the dominant electrochemical reaction.In lithiation,the NixSynanoparticles evolve into a mixture of Ni nanocrystals embedded in Li_(2)S matrix,which form a porous structure upon full lithiation,and with the recrystallization of the Ni_(3)S_(2)phase in delithiation,a compact and interconnected network is built.Structural stability in cycles is susceptible to particle size and substrate restraint.Carbon substrate can certainly improve the tolerance for size-dependent pulverization of NixSynanoparticles.When NixSynanoparticle exceeds the critical size value,the morphology of the particle is no longer well maintained even under the constraints of the carbon substrate.This work deepens the understanding of electrochemical reaction behavior of conversiontype materials and helps to rational design of high-energy density battery anodes.

Recent Advances in Structural Optimization and Surface Modification on Current Collectors for High‑Performance Zinc Anode:Principles,Strategies,and Challenges

The last several years have witnessed the prosperous development of zinc-ion batteries(ZIBs),which are considered as a promising competitor of energy storage systems thanks to their low cost and high safety.However,the reversibility and availability of this system are blighted by problems such as uncontrollable dendritic growth,hydrogen evolution,and corrosion passivation on anode side.A functionally and structurally well-designed anode current collectors(CCs)is believed as a viable solution for those problems,with a lack of summarization according to its working mechanisms.Herein,this review focuses on the challenges of zinc anode and the mechanisms of modified anode CCs,which can be divided into zincophilic modification,structural design,and steering the preferred crystal facet orientation.The possible prospects and directions on zinc anode research and design are proposed at the end to hopefully promote the practical application of ZIBs.

The etching strategy of zinc anode to enable high performance zinc-ion batteries

Zinc-ion batteries(ZIBs)are considered to be one of the most promising candidates to replace lithium-ion batteries(LIBs)due to the high theoretical capacity,low cost and intrinsic safety.However,zinc dendrites,hydrogen evolution reaction,surface passivation and other side reactions will inevitably occur during the charging and discharging process of Zn anode,which will seriously affect the cycle stability of the battery and hinder its practical application.The etching strategy of Zn anode has attracted wide attention because of its simple operation and broad commercial prospects,and the etched Zn anode can effectively improve its electrochemical performance.However,there is no comprehensive review of the etching strategy of Zn anode.This review first summarizes the challenges faced by Zn anode,then puts forward the etching mechanisms and properties of acid,salt and other etchants.Finally,based on the above discussion,the challenges and opportunities of Zn anode etching strategy are proposed.

Regulating zinc ion transport behavior and solvated structure towards stable aqueous Zn metal batteries

Aqueous Zn metal batteries(AZMBs)with intrinsic safety,high energy density and low cost have been regarded as promising electrochemical energy storage devices.However,the parasitic reaction on metallic Zn anode and the incompatibility between electrode and electrolytes lead to the deterioration of electrochemical performance of AZMBs during the cycling.The critical point to achieve the stable cycling of AZMBs is to properly regulate the zinc ion solvated structure and transfer behavior between metallic Zn anode and electrolyte.In recent years,numerous achievements have been made to resolve the formation of Zn dendrite and interface incompatible issues faced by AZMBs via optimizing the sheath structure and transport capability of zinc ions at electrode-electrolyte interface.In this review,the challenges for metallic Zn anode and electrode-electrolyte interface in AZMBs including dendrite formation and interface characteristics are presented.Following the influences of different strategies involving designing advanced electrode structu re,artificial solid electrolyte interphase(SEI)on Zn anode and electrolyte engineering to regulate zinc ion solvated sheath structure and transport behavior are summarized and discussed.Finally,the perspectives for the future development of design strategies for dendrite-free Zn metal anode and long lifespan AZMBs are also given.

A layered multifunctional framework based on polyacrylonitrile and MOF derivatives for stable lithium metal anode

Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition behavior still occurs at the top of 3D frameworks owing to the local accumulation of Li ions.To promote uniform Li deposition without top dendrite growth,herein,a layered multifunctional framework based on oxidation-treated polyacrylonitrile(OPAN) and metal-organic framework(MOF) derivatives was proposed for rationally regulating the distribution of Li ions flux,nucleation sites,and electrical conductivity.Profiting from these merits,the OPAN/carbon nano fiber-MOF(CMOF) composite framework demonstrated a reversible Li plating/stripping behavior for 500 cycles with a stable Coulombic efficiency of around 99.0% at the current density of 2 mA/cm~2.Besides,such a Li composite anode exhibited a superior cycle lifespan of over 1300 h under a low polarized voltage of 18 mV in symmetrical cells.When the Li composite anode was paired with LiFePO_(4)(LFP) cathode,the obtained full cell exhibited a stable cycling over 500 cycles.Moreover,the COMSOL Multiphysics simulation was conducted to reveal the effects on homogeneous Li ions distribution derived from the above-mentioned OPAN/CMOF framework and electrical insulation/conduction design.These electrochemical and simulated results shed light on the difficulties of designing stable and safe Li metal anode via optimizing the 3D frameworks.

Hard-carbon hybrid Li-ion/metal anode enabled by preferred mesoporous uniform lithium growth mechanism

To achieve high energy density in lithium batteries,the construction of lithium-ion/metal hybrid anodes is a promising strategy.In particular,because of the anisotropy of graphite,hybrid anode formed by graphite/Li metal has low transport kinetics and is easy to causes the growth of lithium dendrites and accumulation of dead Li,which seriously affects the cycle life of batteries and even causes safety problems.Here,by comparing graphite with two types of hard carbon,it was found that hybrid anode formed by hard carbon and lithium metal,possessing more disordered mesoporous structure and lithophilic groups,presents better performance.Results indicate that the mesoporous structure provides abundant active site and storage space for dead lithium.With the synergistic effect of this structure and lithophilic functional groups(–COOH),the reversibility of hard carbon/lithium metal hybrid anode is maintained,promoting uniform deposition of lithium metal and alleviating formation of lithium dendrites.The hybrid anode maintains a 99.5%Coulombic efficiency(CE)after 260 cycles at a specific capacity of 500 m Ah/g.This work provides new insights into the hybrid anodes formed by carbon-based materials and lithium metal with high specific energy and fast charging ability.

Fabrication,characterization and electrochemical properties of porous coral-structured Si/C composite anode for lithium ion battery

A porous coral-structured Si/C composite as an anode material was fabricated by coating Si nanoparticles with a carbon layer from polyvinyl alcohol（PVA）, erosion of hydrofluoric（HF） acid, and secondary coating with pitch. Three samples with different pitch contents of 30%, 40% and 50% were synthesized. The composition and morphology of the composites were characterized by X-ray diffractometry（XRD） and scanning electron microscopy（SEM）, respectively, and the properties were tested by electrochemical measurements. The results indicated that the composites showed obviously enhanced electrochemical performance compared with that without secondary carbon coating. The second discharge capacity of the composite was 773 m A·h/g at a current density of 100 m A/g, and still retained 669 m A·h/g after 60 cycles with a small capacity fade of less than 0.23%/cycle, while the content of secondary carbon source of pitch was set at 40%. Therefore, the cycle stability of the composite could be excellently improved by regulating carbon content of secondary coating.

Hard carbon derived from cellulose as anode for sodium ion batteries:Dependence of electrochemical properties on structure

Cellulose, the most abundant organic polymer on Earth, is a sustainable source of carbon to use as a negative electrode for sodium ion batteries. Here, hard carbons(HC) prepared by cellulose pyrolysis were investigated with varying pyrolysis temperature from 700 °C to 1600 °C. Characterisation methods such as Small Angle X-ray Scattering(SAXS) measurements and N2adsorption were performed to analyse porosity differences between the samples. The graphene sheet arrangements were observed by transmission electron microscopy(TEM): an ordering of the graphene sheets is observed at temperatures above 1150 °C and small crystalline domains appear over 1400 °C. As the graphene sheets start to align, the BET surface area decreases and the micropore size increases. To correlate hard carbon structures and electrochemical performances, different tests in Na//HC cells with 1 M NaPF6ethylene carbonate/dimethyl carbonate(EC/DMC) were performed. Samples pyrolysed from 1300 °C to 1600 °C showed a 300 m Ah/g reversible capacity at C/10 rate(where C = 372 mA/g) with an excellent stability in cycling and a very good initial Coulombic efficiency of up to 84%. Furthermore, hard carbons showed an excellent rate capability where sodium extraction rate varies from C/10 to 5C. At 5C more than 80% of reversible capacity remains stable for hard carbons synthesized from 1000 °C to 1600 °C.

Sandwich-like structure C/SiO_(x)@graphene anode material with high electrochemical performance for lithium ion batteries

Silicon suboxide(SiO_(x),0<x<2)is recognized as one of the next-generation anode materials for high-energy-density lithium ion batteries(LIBs)due to its high theoretical specific capacity and abundant resource.However,the severe mechanical instability arising from large volume variation upon charge/discharge cycles frustrates its electrochemical performance.Here we propose a well-designed sandwich-like structure with sandwiched SiO_(x) nanoparticles between graphene sheets and amorphous carbon-coating layer so as to improve the structural stability of SiO_(x) anode materials during cycling.Graphene sheets and carbon layer together construct a three-dimensional conductive network around SiO_(x) particles,which not only improves the electrode reactions kinetics,but also homogenizes local current density and thus volume variation on SiO_(x) surface.Moreover,Si-O-C bonds between SiO_(x) and graphene endow the strong particle adhesion on graphene sheets,which prevents SiO_(x) peeling from graphene sheets.Owing to the synergetic effects of the structural advantages,the C/SiO_(x)@graphene material exhib-its an excellent cyclic performance such as 890 mAh/g at 0.1 C rate and 73.7%capacity retention after 100 cycles.In addition,it also delivers superior rate capability with a capacity recovery of 886 mAh/g(93.7%recovery rate)after 35 cycles of ascending steps at current range of 0.1-5 C and finally back to 0.1 C.This study provides a novel strategy to improve the structural stability of high-capacity anode materials for lithium/sodium ion batteries.

High-performance Si-Containing anode materials in lithium-ion batteries: A superstructure of Si@Co-NC composite works effectively

To mitigate the massive volume expansion of Si-based anode during the charge/discharge cycles,we synthesized a superstructure of Si@Co±NC composite via the carbonization of zeolite imidazolate frameworks incorporated with Si nanoparticles.The Si@Co±NC is comprised of Sinanoparticle core and N-doped/Co-incorporated carbon shell,and there is void space between the core and the shell.When using as anode material for LIBs,Si@Co±NC displayed a super performance with a charge/discharge capacity of 191.6/191.4 mA h g^(-1)and a coulombic efficiency of 100.1%at 1000 mA g^(-1)after 3000 cycles,and the capacity loss rate is 0.022%per cycle only.The excellent electrochemical property of Si@Co±NC is because its electronic conductivity is enhanced by doping the carbon shell with N atoms and by incorporating with Co particles,and the pathway of lithium ions transmission is shortened by the hollow structure and abundant mesopores in the carbon shell.Also,the volume expansion of Si nanoparticles is well accommodated in the void space and suppressed by the carbon host matrix.This work shows that,through designing a superstructure for the anode materials,we can synergistically reduce the work function and introduce the confinement effect,thus significantly enhancing the anode materials’electrochemical performance in LIBs.

Relationship between initial efficiency and structure parameters of carbon anode material for Li-ion battery

The initial efficiency is a very important criterion for carbon anode material of Li-ion battery.The relationship between initial efficiency and structure parameters of carbon anode material of Li-ion battery was investigated by an artificial intelligence approach called Random Forests using D10,D50,D90,BET specific surface area and TP density as inputs,initial efficiency as output.The results give good classification performance with 91%accuracy.The variable importance analysis results show the impact of 5 variables on the initial efficiency descends in the order of D90,TP density,BET specific surface area,D50 and D10;smaller D90 and larger TP density have positive impact on initial efficiency.The contribution of BET specific surface area on classification is only 18.74%,which indicates the shortcoming of BET specific surface area as a widely used parameter for initial efficiency evaluation.

Cell-nucleus structured electrolyte for low-temperature aqueous zinc batteries

Rechargeable aqueous zinc(Zn) batteries hold great promise for large-scale energy storage,but their implementation is plagued by poor Zn reversibility and unsatisfactory low-temperature performance.Herein,we design a cell-nucleus structured electrolyte by introducing low-polarity 1,2-dimethoxyethane(DME) into dilute 1 M zinc trifluoromethanesulfonate(Zn(OTf)_(2)) aqueous solution,which features an OTf--rich Zn2^(+)-primary solvation sheath(PSS,inner nucleus) and the DMEmodulated Zn^(2+)-outer solvation sheath(outer layer).We find that DME additives with a low dosage do not participate in the Zn2+-PSS but reinforce the Zn-OTf-coordination,which guarantees good reaction kinetics under ultralow temperatures.Moreover,DME breaks the original H-bonding network of H2O,depressing the freezing point of electrolyte to-52.4℃.Such a cell-nucleus-solvation structure suppresses the H_(2)O-induced side reactions and forms an anion-derived solid electrolyte interphase on Zn and can be readily extended to 1,2-diethoxyethane.The as-designed electrolyte enables the Zn electrode deep cycling stability over 3500 h with a high depth-of-discharge of 51.3% and endows the Zn‖V_(2)O_(5)full battery with stable cycling over 1000 cycles at 40℃.This work would inspire the solvation structure design for low-temperature aqueous batteries.

A lean-zinc anode battery based on metal-organic framework-derived carbon

Improving zinc metal(Zn^(0))reversibility and minimizing the N/P ratio are critical to boosting the energy density of Zn^(0) batteries.However,in reality,an excess Zn source is usually adopted to offset the irreversible zinc loss and guarantee sufficient zinc cycling,which sacrifices the energy density and leads to poor practicability of Zn^(0) batteries.To address the above conundrum,here,we report a lean-Zn and hierarchical anode based on metal-organic framework(MOF)-derived carbon,where trace Zn^(0) is pre-reserved within the anode structure to make up for any irreversible zinc source loss.This allows us to construct low N/P ratio Zn^(0) full cells when coupling the lean-Zn anode with Zn-containing cathodes.Impressively,high Zn^(0) reversibility(average Coulombic efficiency of 99.4% for 3000 cycles)and long full-cell lifetime(92% capacity retention after 900 cycles)were realized even under the harsh lean-Zn condition(N/P ratio:1.34).The excellent Zn reversibility is attributed to the hierarchy structure that homogenizes zinc ion flux and electric field distribution,as confirmed by theoretical simulations,which therefore stabilizes Zn^(0) evolution.The lean-Zn anode design strategy will provide new insights into construction of high-energy Zn^(0) batteries for practical applications.

EFFECT OF STRUCTURAL PARAMETERS ON THE THERMAL STRESS OF A NiFe_(2)O_(4)-BASED CERMET INERT ANODE IN ALUMINUM ELECTROLYSIS

Inert anode has been a hot issue in the aluminum industry for many decades. With the help of FEA （finite element analysis） software ANSYS, a model was developed to simulate the thermal stress distribution working condition of an inert anode. To reduce its thermal stress, the effect of some parameters on the thermal stress distribution was investigated, including the anode height, the anode radius, the hole depth, the hole radius, and the radius of inner chamfer and outer chamfer. The results showed that in the actual working condition of an inert anode, there existed a large axial tensile stress near the tangent interface between the anode and bath, which was the major cause of anode breaking. Increasing the anode height and reducing the hole depth properly seemed to be beneficial for the stress distribution. With the increase of anode radius, the stress distribution became better first and then deteriorated, the reasonable value was between 0.045 to 0.06m. The hole radius had a significant effect on the stress and a smaller radius would reduce the thermal stress. The effect of the radius of the inner chamfer and the outer chamfer was less than other parameters.

Anodized metal oxide nanostructures for photoelectrochemical water splitting

Photoelectrochemical(PEC) water splitting offers the capability of harvesting, storing, and converting solar energy into clean and sustainable hydrogen energy. Metal oxides are appealing photoelectrode materials because of their easy manufacturing and relatively high stability. In particular, metal oxides prepared by electrochemical anodization are typical of ordered nanostructures, which are beneficial for light harvesting, charge transfer and transport, and the adsorption and desorption of reactive species due to their high specific surface area and rich channels. However, bare anodic oxides still suffer from low charge separation and sunlight absorption efficiencies. Accordingly, many strategies of modifying anodic oxides have been explored and investigated. In this review, we attempt to summarize the recent advances in the rational design and modifications of these oxides from processes before, during, and after anodization. Rational design strategies are thoroughly addressed for each part with an aim to boost overall PEC performance. The ongoing efforts and challenges for future development of practical PEC electrodes are also presented.

Rationalizing Na-ion solvation structure by weakening carbonate solvent coordination ability for high-voltage sodium metal batteries

Commercial carbonate-based electrolytes feature highly reactive activities with alkali metals,yielding low Coulombic efficiencies and poor cycle life in lithium metal batteries,which possess much higher chemical activity in the rising star sodium metal batteries.To be motivated,we have proposed that decreasing the solvent solvation ability in carbonate-based electrolytes stepwise could enable longterm stable cycling of high-voltage sodium metal batteries.As the solvation capacity reduces,more anions are enticed into the solvation sheath of Na^(+),resulting in the formation of the more desirable interphase layers on the surface of the anode and the cathode.The inorganic-dominated interphases allow highly efficient Na^(+)deposition/stripping processes with a lower rate of dead sodium generation,as well as maintain a stable structure of the high-voltage cathode material.Specifically,the assembled Na||Na_(3)V_(2)(PO_(4))_(2)F_(3)battery exhibits an accelerated ion diffusion kinetics and achieves a higher capacity retention of 85.9%with during the consecutive 200 cycles under the high voltage of 4.5 V.It is anticipated that the tactics we have proposed could be applicable in other secondary metal battery systems as well.

Electrode structure enabling dendrite inhibition for high cycle stability quasi-solid-state lithium metal batteries

Lithium(Li)metal batteries(LMBs)are widely regarded as the ultimate choice for the next generation of high-energy–density batteries.However,the uncontrollable growth of Li dendrites formed by inhomogeneous deposition seriously hinders its commercialization.Although many studies have achieved significant results in inhibiting the formation of Li dendrites,it is still impossible to eradicate them completely.Therefore,regulating the deposition behavior,such as the growth direction of unevenly deposited Li,is preferable to unilaterally suppressing them in some cases.Here we report a structured anode that can confine the deposited Li within holes and tune it to become vertical-up/horizontal-centripetal mixed growth mode by optimizing the electric field/Li^(+)concentration gradient.The Li^(+) adsorbed by the poly(amic acid)(PAA)insulating layer coated on the anode surface can form the Li^(+)concentration gradient pointing to the center of the hole.Combined with the special electric field formed by the hole structure,it is favorable for the Li^(+)to move into the vertically arrayed holes and simultaneously deposit on the bottom and walls.Furthermore,both in-situ and ex-situ observations confirm that the growth mode is changed and the Li deposition morphology is denser,which can greatly delay capacity fading and prolong cycle life in both liquid and quasi-solid-state LMBs.All the results show that the novel anode provides a new perspective for deep research into solid-state LMBs.