Common Artifacts and Remedies in Histological Preparations

The importance of the accuracy of preparing biological specimen as histological sections that can be examined under a microscope lies in reflecting a true image of the tissue that includes all its components, which are used in scientific research or for the purpose of diagnosing various diseases of the body. Despite this, some cellular structures within the tissue may suffer from some alterations that result from the appearance of defects during any stage of preparing these microscopic sections, which alter or interfere with the precise cellular structures and morphology that constitute the tissue and thus give a different image for tissue features and cause confusion in the work histopathologist in the diagnosis. There are several reasons that can cause a misdiagnosis of the sample that occurs during the surgical separation process or after separation during the stages of microscopic preparation techniques from fixation stage, tissue processing, embedding or microtomy, staining until mounting procedures. The constant need to identify these defects and their causes in addition to try to reduce them is one of the biggest challenges evident in pathology laboratories. Therefore, this study aims to review the most common defects that occur in any stage of tissue processing, with an explanation of their causes and appropriate ways to avoid them.

Clinical Value of Endodontic Patients Treated with Calcium Hydroxide Preparations

Objective: To investigate the clinical value of endodontics patients treated with calcium hydroxide preparation. Methods: The study cases were selected from the endodontics patients who visited our hospital during the period from January 2022 to December 2023, and 97 cases were randomly selected according to the numerical table method and divided into two groups. There were 49 cases in the control group and 48 cases in the experimental group. The control group received conventional therapy, while the experimental group received treatment with calcium hydroxide preparation, and the clinical value of the two different treatment modalities was observed and analyzed. Results: In the experimental group, 45 out of 48 patients (93.75%) showed effectiveness, compared to 39 out of 49 patients (79.59%) in the control group. The effectiveness rate was significantly higher in the experimental group (P < 0.05). Initially, the VAS scores between the two groups were similar (P > 0.05), but after 1 and 3 months of treatment, the scores decreased in both groups. However, the experimental group had a greater decrease, indicating lower pain levels (P < 0.05). The experimental group had fewer complications (8.33%) compared to the control group (24.49%), with a significant difference (P < 0.05). Satisfaction with treatment was higher in the experimental group (95.83%) compared to the control group (95.83%), resulting in an overall higher satisfaction rate in the experimental group (83.67%;P < 0.05). Conclusion: The treatment effect of endodontics with calcium hydroxide preparation is remarkable, which not only can effectively help patients to relieve their pain and reduce the incidence of complications but also plays an important role in improving patients’ satisfaction with treatment, which is worthwhile to be vigorously promoted in the clinic and learn from it.

Emerging space for non-polyethene-glycol bowel preparations in inflammatory bowel disease-related colonoscopy:Veering toward better adherence and palatability

Patients with inflammatory bowel diseases(IBDs)require repeated endoscopic evaluations over time by colonoscopy to weigh disease activity but also for different and additional indications(e.g.,evaluation of postoperative recurrence,colorectal cancer surveillance).Colonoscopy,however,requires adequate bowel preparation to be of quality.The latter is achieved as long as the patient takes a certain amount of product to have a number of bowel movements suitable to clean the colon and allow optimal visualization of the mucosa during endoscopy.However,significant guidelines recommend preparations for patients with IBD not excelling in palatability.This recommendation originates from the fact that most of the studies conducted on bowel preparations in patients with IBD have been done with isosmolar preparations based on polyethylene glycol(PEG),for which,therefore,more safety data exist.As a result,the low-volume non-PEG preparations(e.g.,magnesium citrate plus picosulphate,oral sulphate solutions)have been set aside for the whole range of warnings to be heeded because of their hyperosmolarity.New studies,however,are emerging,leaning in overall for a paradigm shift in this matter.Indeed,such non-PEG preparations seem to show a particularly encouraging and engaging safety profile when considering their broad potential for tolerability and patient preference.Indeed,such evidence is insufficient to indicate such preparations in all patients with IBD but may pave the way for those with remission or well-controlled disease.This article summarizes the central studies conducted in IBD settings using non-PEG preparations by discussing their results.

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review

Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The printing quality and performance of L-PBF alloys are infuenced by numerous variables consisting of feedstock powders, manufacturing process,and post-treatment. As the starting materials, metallic powders play a critical role in infuencing the fabrication cost, printing consistency, and properties. Given their deterministic roles, the present review aims to retrospect the recent progress on metallic powders for L-PBF including characterization, preparation, and reuse. The powder characterization mainly serves for printing consistency while powder preparation and reuse are introduced to reduce the fabrication costs.Various powder characterization and preparation methods are presented in the beginning by analyzing the measurement principles, advantages, and limitations. Subsequently, the effect of powder reuse on the powder characteristics and mechanical performance of L-PBF parts is analyzed, focusing on steels, nickel-based superalloys, titanium and titanium alloys, and aluminum alloys. The evolution trends of powders and L-PBF parts vary depending on specific alloy systems, which makes the proposal of a unified reuse protocol infeasible. Finally,perspectives are presented to cater to the increased applications of L-PBF technologies for future investigations. The present state-of-the-art work can pave the way for the broad industrial applications of L-PBF by enhancing printing consistency and reducing the total costs from the perspective of powders.

Application and Practice of Traditional Chinese Medicine Characteristic Technology Inheritance in Research and Development of Traditional Chinese Medicine Preparations in Medical Institutions

Medical institution preparations play an important role in the development of hospitals,being one of the main forms of traditional Chinese medicine clinical characteristic medication,as well as an important carrier for the inheritance and innovation of traditional Chinese medicine.In recent years,the research and development of traditional Chinese medicine preparations has become a hot spot in the research and development of preparations by medical institutions.Traditional Chinese medicine preparations prepared by traditional processes and their entrusted preparation matters have changed from the current licensing management to filing management.The registration model of traditional Chinese medicine preparations has undergone significant changes,emphasizing more on real data and evaluation results from the objective world,respecting traditional medication experience,and emphasizing the inheritance and innovative development of traditional technological experience.In the process of following teachers in the inheritance project of traditional Chinese medicine,we combined the inheritance of traditional Chinese medicine characteristic technology with the research and development practice of traditional Chinese medicine preparations in medical institutions,and focused on the analysis and discussion of technical problems such as prescription screening,dosage form selection,process route design and clinical observation of traditional Chinese medicine preparations,hoping to provide reference for scholars in the same field of traditional Chinese medicine.

On-spot preparation of EDTA solution for the treatment of band keratopathy:a case report

Dear Editor,We report a case of band keratopathy who experienced several ocular surgeries,secondary uveitis and glaucoma which eventually led to severe band keratopathy.We use commonly-used vacuum blood collection tubes with ethylenediaminetetraacetic acid dipotassium salt(EDTA-K2)to prepare chelation solution on-spot to remove the calcium deposits on the corneal surface.It is proved to be relatively safety,efficacy,cost-effective.

Key factors to prioritize when preparing for the Olympic Games

We need more research that will fulfill the needs of athletes and coaches.This is a common statement,highly relevant nowadays only a few weeks before the commencement of the Paris 2024 Olympic Games.To fill this gap,we have identified 6 topics that we feel coaches and athletes would be interested in learning more to optimize their preparation for the Olympics.These topics are.

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron sputtering.The coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to top.The surface of the deposited coatings is flat without obvious defects.The absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is 9.96.After heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the coatings.The absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is 0.0335.The coatings do not fail under this condition and have certain thermal stability.

Research Progress of Bowel Preparation for Colonoscopy

Colorectal cancer ranks third in the global cancer data in 2020. Colorectal scope is the most effective method to diagnose colorectal diseases such as benign and malignant colorectal tumors. The poor quality of intestinal preparation causes an increased rate of missed diagnosis of colorectal tumors, reduces the rate of cecal intubation for colorectal examination, increases the discomfort, and reduces the compliance of re-examination. Therefore, we should try our best to improve the quality of intestinal preparation. This study reviewed the latest advances related to the preoperative preparation for colonoscopy. Recent research shows that smartphone apps can provide more detailed education and guidance on bowel preparation;Pre-packaged foods are more suitable as a way to eat before colonoscopy. The use of smaller doses, better taste of cathartic agents, and some auxiliary measures, combined with the patient’s situation to provide personalized intestinal preparation measures to improve the quality of intestinal preparation. Starting from the quality of colonoscopy bowel preparation, continuous improvement of patients’ tolerance to bowel preparation, continuous improvement of bowel preparation plan based on individual factors’ needs, and better communication with examined subjects by using existing scientific information technology, may be the hot spot of colonoscopy bowel preparation research in the next few years.

Progress in preparation of AlN-reinforced magnesium matrix composites:A review

As a ceramic material,AlN has very good thermophysical and mechanical properties.In addition,AlN is an effective refining agent for Mg alloys because it has a lattice constant similar to that of Mg.Therefore,AlN is an ideal reinforcement for magnesium matrix composites(MMCs),and is attracting increasing attention.This review addresses the development of preparation technologies for AlN-reinforced Mg matrix composites.The mainstream preparation techniques include stir casting,melt infiltration,powder metallurgy,and in-situ methods.In addition,the advantages and disadvantages of these techniques are analyzed in depth,and it is pointed out that the next direction for the preparation of high-performance AlN-reinforced MMCs is less aluminization and multiple technologies integration.

Preparation of single atom catalysts for high sensitive gas sensing

Single atom catalysts(SACs)have garnered significant attention in the field of catalysis over the past decade due to their exceptional atom utilization efficiency and distinct physical and chemical properties.For the semiconductor-based electrical gas sensor,the core is the catalysis process of target gas molecules on the sensitive materials.In this context,the SACs offer great potential for highly sensitive and selective gas sensing,however,only some of the bubbles come to the surface.To facilitate practical applications,we present a comprehensive review of the preparation strategies for SACs,with a focus on overcoming the challenges of aggregation and low loading.Extensive research efforts have been devoted to investigating the gas sensing mechanism,exploring sensitive materials,optimizing device structures,and refining signal post-processing techniques.Finally,the challenges and future perspectives on the SACs based gas sensing are presented.

The preparation and properties of N-doped carbon materials and their use for sodium storage

Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applications.N-doping has been widely investigated because of its similar atom radius to carbon,high electronegativity as well as many different configurations.We summarize the preparation methods and properties of N-doped carbon materials,and discuss their possible use in sodium ion storage.The relationships between N content/configuration and crystallinity,electronic conductivity,wettability,chemical reactivity as well as sodium ion storage performance are discussed.

Insight into demand-driven preparation of single-atomic mediators for lithium–sulfur batteries

Lithium-sulfur(Li-S) batteries have attracted considerable attention as one of the most appealing energy storage systems.Strenuous efforts have been devoted to tackling the tremendous challenges,mainly pertaining to the severe shuttle effect,sluggish redox kinetics and lithium dendritic growth.Single-atomic mediators as promising candidates exhibit impressive performance in addressing these intractable issues.Related research often utilizes a trial-and-error approach,proposing solutions to fabricate single-atomic materials with diversified features.However,comprehensive review articles especially targeting demand-driven preparation are still in a nascent stage.Inspired by these considerations,this review summarizes the design of single-atomic mediators based on the application case-studies in LiS batteries and other metal-sulfur systems.Emerging preparation routes represented by chemical vapor deposition technology are introduced in a demand-oriented classification.Finally,future research directions are proposed to foster the advancement of single-atomic mediators in Li-S realm.

Novel wood-plastic composite fabricated via modified steel slag:Preparation,mechanical and flammability properties

A novel method was developed to enhance the utilization rate of steel slag(SS).Through treatment of SS with phosphoric acid and aminopropyl triethoxysilane(KH550),we obtained modified SS(MSS),which was used to prepare MSS/wood-plastic composites(MSS/WPCs)by replacing talcum powder(TP).The composites were fabricated through melting blending and hot pressing.Their mechanical and combustion properties,which comprise heat release,smoke release,and thermal stability,were systematically investigated.MSS can improve the mechanical strength of the composites through grafting reactions between wood powder and thermoplastics.Notably,MSS/WPC#50(16wt%MSS)with an MSS-to-TP mass ratio of 1:1 exhibited optimal comprehensive performance.Compared with those of WPC#0 without MSS,the tensile,flexural,and impact strengths of MSS/WPC#50 were increased by 18.5%,12.8%,and 18.0%,respectively.Moreover,the MSS/WPC#50 sample achieved the highest limited oxygen index of 22.5%,the highest vertical burning rating at the V-1 level,and the lowest horizontal burning rate at 44.2 mm/min.The formation of a dense and stable char layer led to improved thermal stability and a considerable reduction in heat and smoke releases of MSS/WPC#50.However,the partial replacement of TP with MSS slightly compromised the mechanical and flame-retardant properties,possibly due to the weak grafting caused by SS powder agglomeration.These findings suggest the suitability of MSS/WPCs for high-value-added applications as decorative panels indoors or outdoors.

Effects of site preparation methods on soil physical properties and outplanting success of coniferous seedlings in boreal forests

This study assessed the effect of patch scarification and mounding on the physical properties of the root layer and the success of tree planting in various types of forests.This study was conducted on 12 forest sites in taiga forests of the European part of Russia.A total of 54 plots were set up to assess seedling survival;root collar diameter,height,and heigh increment were measured for 240 seedlings to assess growth.In the rooting layer,240 soil samples were taken to determine physical properties.The study showed that soil treatment methods had no effect on bulk density and total porosity in Cladina sites.However,reduced soil moisture was noted,particularly in mounds,resulting in increased aeration.In Myrtillus sites,there were increased bulk density,reduced soil moisture,and total porosity in the mounds.Mounding treatment in Polytrichum sites resulted in reduced soil moisture and increased aeration porosity.In the Myrtillus and Polytrichum sites,patch scarification had no effects on physical properties.In Polytrichum sites,survival rates,heights,and heigh increments of bareroot Norway spruce seedlings in mounds were higher than in patches;however,the same did not apply to diameter.In Cladina and Myrtillus sites,there was no difference in growth for bareroot and containerised seedlings with different soil treatments.Growing conditions and soil types should be considered when applying different soil treatment methods to ensure high survival rates and successful seedling growth.

Microfluidic preparation of surfactant-free ultrafine DAAF with tunable particle size for insensitive initiator explosives

High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.

Protected simultaneous quantum remote state preparation scheme by weak and reversal measurements in noisy environments

We discuss a quantum remote state preparation protocol by which two parties, Alice and Candy, prepare a single-qubit and a two-qubit state, respectively, at the site of the receiver Bob. The single-qubit state is known to Alice while the two-qubit state which is a non-maximally entangled Bell state is known to Candy. The three parties are connected through a single entangled state which acts as a quantum channel. We first describe the protocol in the ideal case when the entangled channel under use is in a pure state. After that, we consider the effect of amplitude damping(AD) noise on the quantum channel and describe the protocol executed through the noisy channel. The decrement of the fidelity is shown to occur with the increment in the noise parameter. This is shown by numerical computation in specific examples of the states to be created. Finally, we show that it is possible to maintain the label of fidelity to some extent and hence to decrease the effect of noise by the application of weak and reversal measurements. We also present a scheme for the generation of the five-qubit entangled resource which we require as a quantum channel. The generation scheme is run on the IBMQ platform.

Market Research on College Students' Acceptance of Prepared Dishes

With the accelerated pace of life and the demand for dietary diversification,more and more people begin to pay attention to the convenience and health of diet,and the prepared dishes market is getting more and more attention and favor because of its characteristics of convenient and quick.In order to understand the acceptance of college students' to the prepared dishes market,this paper aimed to collect college students' views and suggestions on the prepared dishes market by means of a questionnaire survey.By analyzing the results of the survey,we found that college students' generally have a positive attitude towards prepared dishes markets,and they believe that prepared dishes provides convenient,fast and diversified dietary choices.However,some college students' have some concerns about the quality and food safety of the prepared dishes market,such as adding too many food additives and preservatives.Through the research on college students' acceptance of the prepared dishes market,we can reveal the demand and potential problems of college students' for the prepared dishes market from the consumer s point of view,so as to provide a reference for the future development of the prepared dishes market.

Bowel preparation experiences and needs before follow-up colonoscopy in older adult postoperative colorectal cancer patients: A qualitative study

BACKGROUND The bowel preparation process prior to colonoscopy determines the quality of the bowel preparation,which in turn affects the quality of the colonoscopy.Colono-scopy is an essential procedure for postoperative follow-up monitoring of colorec-tal cancer(CRC)patients.Previous studies have shown that advanced age and a history of colorectal resection are both risk factors for inadequate bowel prepara-tion.However,little attention has been paid to the bowel preparation experiences and needs of predominantly older adult postoperative CRC patients.AIM To explore the experiences and needs of older adult postoperative CRC patients during bowel preparation for follow-up colonoscopy.METHODS Fifteen older adult postoperative CRC patients who underwent follow-up colonoscopy at a tertiary hospital in Shanghai were selected using purposive sampling from August 2023 to November 2023.The phenomenological method in qualitative research was employed to construct an interview outline and conduct semi-structured interviews with the patients.Colaizzi's seven-step analysis was utilized to organize,code,categorize,summarize,and verify the interview data.RESULTS The results of this study were summarized into four themes and eight sub-themes:(1)Inadequate knowledge about bowel preparation;(2)Decreased physiological comfort during bowel preparation(gastrointestinal discomfort and sleep deprivation caused by bowel cleansing agents,and hunger caused by dietary restrictions);(3)Psychological changes during different stages of bowel preparation(pre-preparation:Fear and resistance due to previous experiences;during preparation:Irritation and helplessness caused by taking bowel cleansing agents,and post-preparation:Anxiety and worry while waiting for the colonoscopy);and(4)Needs related to bowel preparation(detailed instructions from healthcare professionals;more ideal bowel cleansing agents;and shortened waiting times for colonoscopy).CONCLUSION Older adult postoperative CRC patients'knowledge of bowel preparation is not adequate,and they may encounter numerous difficulties and challenges during the process.Healthcare professionals should place great emphasis on providing instruction for their bowel preparation.

Optimization of Preparation of Oregano Oil Microspheres by Box-Behnken Response Surface Methodology

[Objectives]To optimize the formulation and preparation of oregano oil microspheres by Box-Behnken response surface methodology.[Methods]Chitosan was used as the carrier material to prepare oregano oil microspheres by emulsion crosslinking method.The encapsulation efficiency,drug loading and ID 50 were used as the evaluation indicators,and the comprehensive score(OD)obtained by"coefficient of variation-AHP comprehensive weighting method"was used as the final evaluation indicator.The formulation design and preparation process were optimized by single factor experiment and Box-Behnken response surface methodology,and the optimal process parameters were determined.[Results]The optimal formulation and preparation process parameters of oregano oil microspheres were as follows:the ratio of oregano oil to chitosan was 2∶1,the emulsifying speed of double emulsion was 200 r/min,the amount of emulsifier in the colostrum was 4%,and the volume of curing agent was 1.0 mL.The average encapsulation efficiency was 45.33%±1.32%,the average drug loading was 30.59%±2.45%,and the median diameter(ID 50)was 52.596μm±0.023%.[Conclusions]The encapsulation efficiency,drug loading and ID 50 of oregano oil chitosan microspheres prepared by emulsion crosslinking method met the requirements.The drug-loaded microsphere not only can be used as a preparation finished product for direct application,but also be used as a product intermediate to lay a foundation for the research and development of subsequent dosage forms.