Instability mechanism of mining roadway passing through fault at different angles in kilometre-deep mine and control measures of roof cutting and NPR cables

The angle α between the fault strike and the axial direction of the roadway produces different damage characteristics. In this paper, the research methodology includes theoretical analyses, numerical simulations and field experiments in the context of the Daqiang coal mine located in Shenyang, China. The stability control countermeasure of "pre-splitting cutting roof + NPR anchor cable"(PSCR-NPR) is simultaneously proposed. According to the different deformation characteristics of the roadway, the faults are innovatively classified into three types, with α of type I being 0°-30°, α of type II being 30°-60°, and α of type III being 60°-90°. The full-cycle stress evolution paths during mining roadway traverses across different types of faults are investigated by numerical simulation. Different pinch angles α lead to high stress concentration areas at different locations in the surrounding rock. The non-uniform stress field formed in the shallow surrounding rock is an important reason for the instability of the roadway. The pre-cracked cut top shifted the high stress region to the deep rock mass and formed a low stress region in the shallow rock mass. The high prestressing NPR anchor cable transforms the non-uniform stress field of the shallow surrounding rock into a uniform stress field. PSCR-NPR is applied in the fault-through roadway of Daqiang mine. The low stress area of the surrounding rock was enlarged by 3-7 times, and the cumulative convergence was reduced by 45%-50%. It provides a reference for the stability control of the deep fault-through mining roadway.

Stability control measures for roof cutting and NPR supporting of mining roadways in fault areas of kilometre-deep coal mine

The study focuses on the stability control measures for mining roadways in fault zones of deep mines,using Daqiang Coal Mine as a case study.The control system under consideration,referred to as"pre-splitting cutting roof+NPR anchor cable"(PSCR-NPR),is subjected to scrutiny through theoretical analysis,numerical modelling,and field trials.Furthermore,a comprehensive analysis is undertaken to evaluate the stability control mechanism of this particular technology.The study provides evidence that the utilization of deep-hole directional energy-concentrated blasting facilitates the attainment of directional roof cutting in roadways.The aforementioned procedure leads to the formation of a uniform structural surface on the roof of the roadway and causes modifications in the surrounding geological formation.The examination of the lateral abutment pressure and shear stress distribution,both prior to and subsequent to roof cutting,indicates that the implementation of pre-splitting techniques leads to a noteworthy reduction in pressure.The proposition of incorporating the safety factor Q for roof cutting height is suggested as a method to augment comprehension of the pressure relief phenomenon in the field of engineering.The analysis of numerical simulation has indicated that the optimal pressure relief effect of a mining roadway in a fault area is attained when the value of Q is 1.8.The NPR anchor cable exhibits noteworthy characteristics,including a high level of prestress,continuous resistance,and substantial deformation.After the excavation of the roadway,a notable reduction in radial stress occurs,leading to the reinstatement of the three-phase stress state in the surrounding rock.This restoration is attributed to the substantial prestress exerted on the radial stress.The termination point of the NPR anchor cable is strategically positioned within a stable rock formation,allowing for the utilization of the mechanical characteristics of the deep stable rock mass.This positioning serves to improve the load-bearing capacity of the surrounding rock.The mining roadway within the fault region of Daqiang Coal Mine is outfitted with the PSCR-NPR technology.The drop in shear stress experienced by the rock surrounding the roadway is estimated to be around 30%,whilst the low-stress region of the mining roadway extends by a factor of approximately 5.5.The magnitude of surface displacement convergence experiences a decrease of approximately 45%-50%.The study’s findings provide useful insights regarding the stable of mining roadway in characterized by fault zones.

Evaluation of roof cutting by directionally single cracking technique in automatic roadway formation for thick coal seam mining

Automatic roadway formation by roof cutting is a sustainable nonpillar mining method that has the potential to increase coal recovery,reduce roadway excavation and improve mining safety.In this method,roof cutting is the key process for stress relief,which significantly affects the stability of the formed roadway.This paper presents a directionally single cracking(DSC)technique for roof cutting with considerations of rock properties.The mechanism of the DSC technique was investi-gated by explicit finite element analyses.The DSC technique and roof cutting parameters were evaluated by discrete element simulation and field experiment.On this basis,the optimized DSC technique was tested in the field.The results indicate that the DSC technique could effectively control the blast-induced stress distribution and crack propagation in the roof rock,thus,achieve directionally single cracking on the roadway roof.The DsC technique for roof cutting with optimized parameters could effectively reduce the deformation and improve the stability of the formed roadway.Field engineering application verified the feasibility and effectiveness of the evaluated DSC technique for roof cutting.

Fixed-length roof cutting with vertical hydraulic fracture based on the stress shadow effect:A case study

Pre-driven longwall retracement roadway(PLRR)is commonly used in large mine shaft.The support crushing disasters occur frequently during the retracement,and roof management is necessary.Taking the 31107 panel as research background,the roof breaking structure of PLRR is analyzed.It is concluded that the roof cutting with vertical hydraulic fracture(HF)at a specified position,that is,fixed-length roof cutting,can reduce support load and keep immediate roof intact.The extended finite element method(XFEM)is applied to simulate hydraulic fracturing.The results show that both the axial and transverse hydraulic fracturing cannot effectively create vertical HFs.Therefore,a novel construction method of vertical HF based on the stress shadow effect(SSE)is proposed.The stress reversal region and HF orientation caused by the prefabricated hydraulic fracture(PF)are verified in simulation.The sub-vertical HFs are obtained between two PFs,the vertical extension range of which is much larger than that of directional hydraulic fracturing.The new construction method was used to determine the field plan for fixed-length roof cutting.The roof formed a stable suspended structure and deformation of the main PLRR was improved after hydraulic fracturing.

Investigation of a non-explosive directional roof cutting technology for self-formed roadway

Traditional explosives have characteristics of high risk,large vibration,and poor directional fracturing.Consequently,an instantaneous expander with a single crack surface(IESCS),which is a novel nonexplosive directional rock-breaking technique,has been developed.The directional roof-cutting mechanism of the IESCS method,driven by high-pressure gas,was theoretically analyzed.Laboratory experiments and numerical simulations proved the directional slitting effect of the IESCS method to be excellent.Compared with shaped-charge blasting,the charge of IESCS was reduced by 8.9%,but the crack rate increased by 9%in field tests.After IESCS pre-splitting,the roof directionally collapsed along the cutting line,and the gangue filled the goaf.Moreover,the directional roof cutting by the IESCS could decrease roadway stress.The average pressure of hydraulic supports on the cutting side of the roof was 31%lower than that on the non-cutting side of the roof after pre-splitting.After the self-formed roadway constructed by the IESCS was stabilized,the final relative displacement of the roof and floor was 157.3 mm,meeting the required standard of the next working face.Thus,the IESCS was effectively applied to directional roof pre-splitting.The results demonstrate the promising potential of IESCS in the mining and geotechnical fields.

Comparative Analysis of the Distribution Characteristics of Floor Stress Field between Gob-Side Entry Retaining with Roof Cutting and Conventional Mining

All coal fields in North China are affected by floor confined water to varying degrees, floor failure and water inrush risk have always been a major problem to baffle coal mining activities. Roof cutting and pressure relief and the lack of protective coal pillar can cause the change of floor stress field, leading to the change of the floor failure depth, stress field of floor is the key to determine the depth of floor failure. In order to deeply study the distribution characteristics of floor stress field in gob-side entry retaining mining with roof cutting, taking the 50107 and 50109 working faces of Dongdong Coal Mine in Chenghe as the research objects, the numerical simulation software is used to simulate the floor stress field distribution of gob-side entry retaining mining with roof cutting and conventional mining. The distribution characteristics of the floor stress field of the working face are compared and analyzed under the three modes of conventional mining of reserved coal pillar, the first mining face of gob-side entry retaining with roof cutting and gob-side entry retaining with roof cutting. The results show that the peak stress concentration in front of the working face all occurs at 10 m under the three mining modes. The stress concentration area in front of conventional working face of reserved coal pillar is mainly in the middle of the working face. The stress concentration area in front of the first working face of gob-side entry retaining with roof cutting (50107) is located in the middle of the working face and the side of the working face of the retaining roadway. The stress concentration area of the working face (50109) is mainly in the middle and the two ends of the working face. The order of the peak value of the maximum concentrated stress in front of the working face is conventional working face of reserved coal pillar > the first working face of gob-side entry retaining with roof cutting (50107) > working face of gob-side entry retaining with roof cutting (50109). There is a stress reduction zone behind the working face, but there is a stress concentration phenomenon extending to the outside of the roadway, and the stress distribution is obviously different. Conventional working face of reserved coal pillar and the first working face of gob-side retaining with roof cutting (50107) show a double peak form of stress concentration on the outside of the two ends of the roadway, and the peak value of the concentrated stress at the rear of the working face is in the following order: On the side close to the transportation roadway, conventional working face of reserved coal pillar = the first working face of gob-side entry retaining with roof cutting (50107) > working face of gob-side entry retaining with roof cutting (50109);on the side close to the return airway, conventional working face of reserved coal pillar > the first working face of gob-side entry retaining with roof cutting (50107) > working face of gob-side entry retaining with roof cutting (50109).

What can the changes in shield resistance tell us during the period of shearer's cutting and neighboring shields' advance?

In order to determine the influence of shearer's cutting and neighboring shields' advance on the support resistance variation, leg pressure data of all 235 shields in the panel LW61 of Cumberland coal mine were analyzed. The results show that the relationship between the leg pressure increment and the distance from shield to front drum of shearer is a quadratic function and that the higher leg pressure increment before shield advance tends to be related to adverse roof conditions. In addition, the three proposed leg pressure increment-related parameters and the three traditional parameters(time-weighted average pressure, setting pressure, and final pressure) of approximately 32000 shield supporting cycles were calculated by a self-developed software package to analyze the correlation between them. The results show that there is a powerful connection between them, and that the three proposed leg pressure increment-related parameters could be used as the indexes to evaluate the interaction between shields and the roof, and to identify the periodic weighting.

Ground response and failure mechanism of gob-side entry by roof cutting with hard main roof

This study is the result of long-term efforts of the authors’team to assess ground response of gob-side entry by roof cutting(GSERC)with hard main roof,aiming at scientific control for GSERC deformation.A comprehensive field measurement program was conducted to determine entry deformation,roof fracture zone,and anchor bolt(cable)loading.The results indicate that GSERC deformation presents asymmetric characteristics.The maximum convergence near roof cutting side is 458 mm during the primary use process and 1120 mm during the secondary reuse process.The entry deformation is closely associated with the primary development stage,primary use stage,and secondary reuse stage.The key block movement of roof cutting structure,a complex stress environment,and a mismatch in the supporting design scheme are the failure mechanism of GSERC.A controlling ideology for mining states,including regional and stage divisions,was proposed.Both dynamic and permanent support schemes have been implemented in the field.Engineering practice results indicate that the new support scheme can efficiently ensure long-term entry safety and could be a reliable approach for other engineering practices.

千米深井切顶卸压自成巷支护技术及应用

为了解决深部复杂条件下的切顶卸压自成巷难题,以红阳三矿703工作面运输巷道为研究对象,从恒阻大变形锚索超前支护、切顶巷内支护、切顶巷旁支护三个方面研究了切顶卸压沿空成巷支护技术,并对现场试验巷道顶板受力以及巷道围岩变形量进行了监测。结果表明:在超前工作面实施爆破切顶能够极大降低巷道所受应力,成巷区巷道顶板整体下沉量较小,巷中顶板最大下沉量约385 mm,平均下沉量约280 mm,巷中底鼓最大值545 mm,碎石巷帮无明显侧鼓现象,实体煤帮无明显片帮现象,满足安全和使用要求,巷道围岩变形在可控范围内,留巷效果良好。

基于力学模型构建的留巷切顶高度确定与围岩控制技术

以顺和煤矿2401运输巷道沿空留巷为工程背景,分析巷道围岩结构特征,基于巷道局部空间结构稳定性,分别构建了沿空留巷未切顶与切顶力学结构模型,并以巷道不同切顶高度进行物理相似模拟试验。结果表明:巷旁采空区切落的矸石增加对关键块的支撑力,同时弱化关键块对直接顶悬壁端部挤压,巷旁支护阻力减少35.78%;随着切顶高度增加,巷道顶板采空区侧端部悬臂由F型缓慢过渡到大I型,同时大保护结构具有向上平移趋势,相比于未切顶1巷,4 cm切顶2巷、8 cm切顶3巷与16 cm切顶4巷叠加应力峰值分别下降9.38%,28.13%,25.00%。结合巷道顶板岩性,最终确定切顶高度为8.2 m,留巷段采用三列单体液压支柱作巷旁支护,长短锚索超前补强,巷道围岩稳定,较好满足使用要求。

跨断层切顶卸压自成巷顶板变形机理及控制技术研究

针对跨断层切顶卸压自成巷顶板变形大不易支护的问题,以棋盘井煤矿东区11101工作面运输巷为工程背景,探究跨断层切顶卸压自成巷顶板变形机理,研究“切顶卸压+恒阻锚索”支护对跨断层切顶卸压自成巷顶板变形的控制效果。建立力学分析模型研究断层及切顶卸压自成巷顶板各相关参数对巷道直接顶应力的影响,将切顶卸压自成巷顶板变形过程划分为4个阶段,研究巷道顶板各阶段及总垂直位移量计算方法并给出计算公式,并将相关参数代入公式求解跨断层切顶卸压自成巷顶板垂直位移量;利用3DEC数值模拟软件建立跨断层切顶卸压自成巷数值计算模型,研究断层附近巷道顶板应力应变演化规律及恒阻锚索控制效果,研究结果表明:数值模拟上下盘巷道顶板变形数据与理论分析所得数据结果误差分别为1.14%、4.04%;恒阻锚索能够有效减小巷道顶板变形,与未使用恒阻锚索模型相比,上盘巷道切缝侧顶板垂直位移量减小至16.8%,下盘巷道切缝侧顶板垂直位移量减小至50.7%;上下盘巷道顶板在工作面回采过巷道测点断面过程中出现不同程度的应力集中,其中上盘巷道顶板的垂直应力集中值大于下盘巷道,分别为5.72 MPa和4.48 MPa;恒阻锚索通过减缓断层附近巷道顶板变形速率,待巷旁碎石帮充填完成后与碎石帮共同对巷道顶板变形进行控制;将11101工作面运输巷围岩位移监测数据与理论模型计算结果相比较,误差均在10%以内,证明“切顶卸压+恒阻锚索”支护方式对跨断层巷道顶板变形具有良好的控制效果。

硬岩顶板切顶留巷围岩变形分区补强控制研究

【目的】森达源煤矿传统的宽煤柱开采方式导致采掘接续紧张,并引发严重的围岩变形问题。切顶留巷技术可优化巷道支护条件,提高采煤效率,促进煤矿高效安全生产。【方法】以1号煤层的10101工作面为研究对象,运用FLAC 3D数值模拟软件,深入探究了切顶高度、切顶角度、注浆加固深度对巷道掘进、预裂切顶和切顶留巷过程中煤帮内部、采空区及顶板应力变形特性的影响。确定出最佳切顶留巷方案。在此基础上,进一步模拟分析工作面前后不同区域的围岩受力变形情况。提出回采工作面前方0~30 m内为超前补强区,采取“高预应力锚索+单体配合铰接顶梁”的联合支护。后方0~100 m内为滞后补强区,采用“工字钢+单体支柱”联合支护,同时对矸石帮实施注浆加固。通过工程应用验证了区分补强控制变形措施的有效性。【结果】结果显示:最佳切顶留巷方案为切顶高度6 m,切顶角度15°,矸石帮注浆深度1 m。此方案下,10101工作面的巷道顶底板的最终变形量为155 mm,两帮的为84 mm,均符合矿井使用要求,验证了切顶留巷技术具有良好效果。【结论】结果表明:切顶留巷技术能有效解决传统宽煤柱开采方式中存在的围岩变形问题。然而,该技术的实施受切顶高度、切顶角度和矸石帮注浆深度等因素的影响较大,需结合数值模拟和现场状况进行具体确定。总体上,切顶留巷技术和分区补强控制措施对围岩变形的控制效果显著,为类似条件下的煤矿开采提供了宝贵的经验借鉴,因而具有广阔的应用前景。

极近距离煤层开采无煤柱自成巷控制方法研究

极近距离煤层传统长壁开采,受上层遗留煤柱和采空区垮落等因素的影响,下煤层开采过程中应力环境复杂、矿压显现剧烈,易诱发巷道围岩大变形。为解决上述问题,提出了极近距离条件下巷道定向切顶–约束高强支护无煤柱自成巷控制方法。通过顶板定向预裂切顶,主动改变顶板悬臂结构,切断采空区向巷道顶板的应力传递。充分利用矿山压力和岩体碎胀特性,取消煤柱留设,结合高强支护加强巷道顶板整体性,共同实现切顶自成巷。建立了极近距离煤层开采覆岩结构模型,计算了下煤层切顶自成巷巷旁支护阻力。以典型极近距离煤层为工程背景,开展了不同开采方法的数值试验对比研究,结果表明,提出的自成巷控制方法使巷道围岩应力降低59.8%,巷道顶板变形减少70.8%,并明确了极近距离煤层开采无煤柱自成巷控制机理。在此基础上,开展了典型极近距离煤层工程设计及现场应用研究,结果表明该方法有效降低了矿压显现程度,保证了自成巷的安全稳定控制。

底板动压巷道压裂弱结构体应力转移控制技术

为了满足煤矿安全生产的需要,许多巷道都会布置在煤层底板中,如部分运输大巷、排水巷道、瓦斯抽采巷道等。采动应力容易造成底板巷道围岩应力升高,加剧底板巷道围岩变形,造成支护永久失效、顶板下沉、巷道底鼓、两帮收敛等破坏。针对此,提出了在应力传递路径上实施水力压裂,在指定的区域制造出一定空间形态的水压裂缝网,形成压裂弱结构体,实现区域范围内的应力转移,从而降低巷道区域范围内的应力,控制巷道的围岩稳定性的控制技术,并通过理论分析及现场工程验证等方式,揭示了底板动压巷道压裂弱结构体应力转移的力学机制,建立了相应的力学模型,对压裂弱结构体的合理位置、范围等影响因素进行了求解。得出:(1)压裂弱结构体使局部应力场发生明显变化,出现应力升高区和应力降低区,应力降低区主要分布在弱结构体与采动应力连线的方向上,主要集中在一个拱形的范围内;由于膨胀效应,在与应力来源垂直的方向上产生应力集中,出现应力升高区。(2)最大主应力变化幅度与压裂弱结构体的长轴长L、短轴长H、到巷道的距离P、与巷道连线的水平夹角β、压裂层的强度C及内摩擦角α、压裂的损伤变量D等有关。其中到巷道的距离P对卸压效果影响最大,损伤变量D对卸压效果影响最小。(3)采用提出的计算方法设计了淮北矿业集团袁店一矿的103运输集中巷的卸压方案,工程应用结果表明,底板动压巷道变形速率明显减缓,验证了底板强动压巷道压裂弱结构体应力转移模型的合理性。

大采高综采工作面切顶留巷矸石帮变形控制技术研究

为解决厚煤层大采高综采工作面切顶留巷矸石帮围岩控制难题,首先利用理论分析建立了不同挡矸支护条件下矸石帮位移变化的力学公式,以此为基础提出矸石帮变形控制双策略,减弱矸石帮变形压力和增强矸石帮的抗变形能力;其次利用现场实验设计两种类别共4组挡矸支护方案,探讨不同支护方案的矸石帮控制效果,验证理论研究成果。结果表明:①增强矸石帮侧顶板支护强度,能减弱矸石帮变形压力;②增架卡兰个数、增加卡兰预紧力、增加卡兰个数、增强U型钢之间的摩擦力等能增加U型钢滑移初始滑移应力,增强矸石帮的抗变形能力;③挡矸支护控制效果为:2副卡兰+单体支柱<2副卡兰+单元支架<2副卡兰+单元支架+呛柱<3副卡兰+单元支架。该研究可为同类条件下切顶留巷矸石帮变形控制提供参考。

矿震与冲击地压防治研究进展

矿震与冲击地压是采矿领域亟待解决的热点、难点和瓶颈问题,为了有效控制矿震与冲击地压,综述矿震定义与分类、矿压假说及矿震与冲击地压防治技术,回顾切顶卸压理论及其在中厚金矿采空区处理与卸压开采、中厚及以下煤矿沿空留巷中的应用,并比较其与110工法的差异。据此,给出矿震定义,指出矿震与冲击地压发生的条件类似,针对厚矿体开采提出深埋坚硬顶板控制爆破切槽放顶技术。研究表明:控制爆破切槽放顶技术仍然是未来矿震与冲击地压防治中释放并转移高地压的主要方法,它还可将深埋厚矿体的“砌体梁”简化成弹簧岩梁承载体系。

沿空留巷密集钻孔切顶机理及关键参数确定方法

为实现密集钻孔切顶条件下沿空留巷顶板结构安全稳定,研究正常情况与密集钻孔条件下顶板岩层结构受力状况,基于岩石断裂理论和弹性理论分析回采前后顶板密集钻孔孔间围岩受力分布及其破断过程,明确密集钻孔切顶机理及相邻钻孔的孔间集中应力相互作用机制,推导工作面端头弧形三角板结构巷道侧边界密集钻孔孔间围岩的拉剪应力计算公式。在此基础上,分析不同参数对孔间围岩所受拉剪应力的影响作用,提出沿空留巷密集钻孔切顶关键参数确定方法。研究表明:密集钻孔主要通过回采前后钻孔周围应力条件改变来增加钻孔围岩拉剪应力集中程度,引起孔间裂隙扩张联通,形成切缝线破断关键岩层。回采前钻孔主要受水平挤压应力影响,回采后钻孔受力逐渐转变为采空区顶板回转下沉产生的拉剪应力为主,钻孔孔间围岩状态随之由孔间围岩弱化阶段过渡到孔壁裂纹成形阶段,再转变为孔间围岩破断阶段。密集钻孔孔间围岩所受拉剪应力大小主要取决于关键岩层厚度及钻孔孔径与孔间距之比,与钻孔高度及间距成负相关,与角度及直径正相关。据此提出了密集钻孔关键参数确定方法,并根据龙滩矿3124 N工作面坚硬顶板条件设计了密集钻孔切顶留巷方案,确定钻孔长度为8.3 m,角度为15°,钻孔直径为48 mm,间距为500 mm。留巷后巷道顶帮变形可控且整体稳定性较好,由此可证明密集钻孔布置参数较为合理,密集钻孔关键参数确定方法有效可行。

赵官矿切顶卸压沿空留巷爆破参数研究

以赵官矿2707W工作面为工程背景,对切顶卸压沿空留巷爆破参数进行研究。结合现场工程地质条件,选用双向聚能拉伸爆破技术对试验段顶板进行预裂。综合运用理论分析计算、现场爆破试验等手段,得到了合理的爆破参数:爆破钻孔深度8.0 m,切顶角度10°,炮孔间距600 mm,装药结构为5+4+3。通过现场钻孔窥视和矿压监测等手段验证了切顶爆破效果良好,在丰富切顶卸压沿空留巷爆破技术理论的同时,也为类似工况提供一定的工程借鉴意义。

大巷煤柱优化设计及切顶卸压技术应用

针对工作面停采线与采区大巷之间留设较大宽度的保护煤柱及切顶卸压技术问题,以木瓜煤矿二盘区10-208工作面为工程背景,采用力学理论分析与数值模拟等方法,分析10-208超前支撑压力分布及影响规律,探讨了不同切顶高度和切顶角度时护巷煤柱的安全性及稳定性。结果表明:10-208工作面在切顶卸压基础上,停采线护巷煤柱尺寸应不小于24.29 m;模拟显示切顶卸压效果是随着切顶高度的增加而增加的,在切顶高度15 m时卸压效果最好;随着切顶高度的确定,不同切顶角度下的卸压效果差距不大,但相比较而言,切顶角度为65°时可减小超前影响范围。通过实施10-208切巷静态胀裂切顶卸压方案,实现为矿井安全高效生产提供有力支撑。