Classical multi-channel technology can significantly reduce the pre-stack seismic inversion uncertainty, especially for complex geology such as high dipping structures. However, due to the consideration of complex str...Classical multi-channel technology can significantly reduce the pre-stack seismic inversion uncertainty, especially for complex geology such as high dipping structures. However, due to the consideration of complex structure or reflection features, the existing multi-channel inversion methods have to adopt the highly time-consuming strategy of arranging seismic data trace-by-trace, limiting its wide application in pre-stack inversion. A fast pre-stack multi-channel inversion constrained by seismic reflection features has been proposed to address this issue. The key to our method is to re-characterize the reflection features to directly constrain the pre-stack inversion through a Hadamard product operator without rearranging the seismic data. The seismic reflection features can reflect the distribution of the stratum reflection interface, and we obtained them from the post-stack profile by searching the shortest local Euclidean distance between adjacent seismic traces. Instead of directly constructing a large-size reflection features constraint operator advocated by the conventional methods, through decomposing the reflection features along the vertical and horizontal direction at a particular sampling point, we have constructed a computationally well-behaved constraint operator represented by the vertical and horizontal partial derivatives. Based on the Alternating Direction Method of Multipliers (ADMM) optimization, we have derived a fast algorithm for solving the objective function, including Hadamard product operators. Compared with the conventional reflection features constrained inversion, the proposed method is more efficient and accurate, proved on the Overthrust model and a field data set.展开更多
Heavy oil has high density and viscosity, and exhibits viscoelasticity. Gassmann's theory is not suitable for materials saturated with viscoelastic fluids. Directly applying such model leads to unreliable results ...Heavy oil has high density and viscosity, and exhibits viscoelasticity. Gassmann's theory is not suitable for materials saturated with viscoelastic fluids. Directly applying such model leads to unreliable results for seismic inversion of heavy oil reservoir. To describe the viscoelastic behavior of heavy oil, we modeled the elastic properties of heavy oil with varying viscosity and frequency using the Cole-Cole-Maxwell (CCM) model. Then, we used a CCoherent Potential Approximation (CPA) instead of the Gassmann equations to account for the fluid effect, by extending the single-phase fluid condition to two-phase fluid (heavy oil and water) condition, so that partial saturation of heavy oil can be considered. This rock physics model establishes the relationship between the elastic modulus of reservoir rock and viscosity, frequency and saturation. The viscosity of the heavy oil and the elastic moduli and porosity of typical reservoir rock samples were measured in laboratory, which were used for calibration of the rock physics model. The well-calibrated frequency-variant CPA model was applied to the prediction of the P- and S-wave velocities in the seismic frequency range (1–100 Hz) and the inversion of petrophysical parameters for a heavy oil reservoir. The pre-stack inversion results of elastic parameters are improved compared with those results using the CPA model in the sonic logging frequency (∼10 kHz), or conventional rock physics model such as the Xu-Payne model. In addition, the inversion of the porosity of the reservoir was conducted with the simulated annealing method, and the result fits reasonably well with the logging curve and depicts the location of the heavy oil reservoir on the time slice. The application of the laboratory-calibrated CPA model provides better results with the velocity dispersion correction, suggesting the important role of accurate frequency dependent rock physics models in the seismic prediction of heavy oil reservoirs.展开更多
The major storage space types in the carbonate reservoir in the Ordovician in the TZ45 area are secondary dissolution caves.For the prediction of caved carbonate reservoir,post-stack methods are commonly used in the o...The major storage space types in the carbonate reservoir in the Ordovician in the TZ45 area are secondary dissolution caves.For the prediction of caved carbonate reservoir,post-stack methods are commonly used in the oilfield at present since pre-stack inversion is always limited by poor seismic data quality and insufficient logging data.In this paper,based on amplitude preserved seismic data processing and rock-physics analysis,pre-stack inversion is employed to predict the caved carbonate reservoir in TZ45 area by seriously controlling the quality of inversion procedures.These procedures mainly include angle-gather conversion,partial stack,wavelet estimation,low-frequency model building and inversion residual analysis.The amplitude-preserved data processing method can achieve high quality data based on the principle that they are very consistent with the synthetics.Besides,the foundation of pre-stack inversion and reservoir prediction criterion can be established by the connection between reservoir property and seismic reflection through rock-physics analysis.Finally,the inversion result is consistent with drilling wells in most cases.It is concluded that integrated with amplitude-preserved processing and rock-physics,pre-stack inversion can be effectively applied in the caved carbonate reservoir prediction.展开更多
Joint PP–PS inversion offers better accuracy and resolution than conventional P-wave inversion. P-and S-wave elastic moduli determined through data inversions are key parameters for reservoir evaluation and fluid cha...Joint PP–PS inversion offers better accuracy and resolution than conventional P-wave inversion. P-and S-wave elastic moduli determined through data inversions are key parameters for reservoir evaluation and fluid characterization. In this paper, starting with the exact Zoeppritz equation that relates P-and S-wave moduli, a coefficient that describes the reflections of P-and converted waves is established. This method effectively avoids error introduced by approximations or indirect calculations, thus improving the accuracy of the inversion results. Considering that the inversion problem is ill-posed and that the forward operator is nonlinear, prior constraints on the model parameters and modified low-frequency constraints are also introduced to the objective function to make the problem more tractable. This modified objective function is solved over many iterations to continuously optimize the background values of the velocity ratio, which increases the stability of the inversion process. Tests of various models show that the method effectively improves the accuracy and stability of extracting P and S-wave moduli from underdetermined data. This method can be applied to provide inferences for reservoir exploration and fluid extraction.展开更多
The extensive application of pre-stack depth migration has produced huge volumes of seismic data,which allows for the possibility of developing seismic inversions of reservoir properties from seismic data in the depth...The extensive application of pre-stack depth migration has produced huge volumes of seismic data,which allows for the possibility of developing seismic inversions of reservoir properties from seismic data in the depth domain.It is difficult to estimate seismic wavelets directly from seismic data due to the nonstationarity of the data in the depth domain.We conduct a velocity transformation of seismic data to make the seismic data stationary and then apply the ridge regression method to estimate a constant seismic wavelet.The estimated constant seismic wavelet is constructed as a set of space-variant seismic wavelets dominated by velocities at different spatial locations.Incorporating the weighted superposition principle,a synthetic seismogram is generated by directly employing the space-variant seismic wavelets in the depth domain.An inversion workflow based on the model-driven method is developed in the depth domain by incorporating the nonlinear conjugate gradient algorithm,which avoids additional data conversions between the time and depth domains.The impedance inversions of the synthetic and field seismic data in the depth domain show good results,which demonstrates that seismic inversion in the depth domain is feasible.The approach provides an alternative for forward numerical analyses and elastic property inversions of depth-domain seismic data.It is advantageous for further studies concerning the stability,accuracy,and efficiency of seismic inversions in the depth domain.展开更多
Seismic AVAZ inversion method based on an orthorhombic model can be used to invert anisotropy parameters of the Longmaxi shale gas reservoir in the Sichuan Basin..As traditional seismic inversion workfl ow does not su...Seismic AVAZ inversion method based on an orthorhombic model can be used to invert anisotropy parameters of the Longmaxi shale gas reservoir in the Sichuan Basin..As traditional seismic inversion workfl ow does not suffi ciently consider the infl uence of fracture orientation,we predict fracture orientation using the method based on the Fourier series to correct pre-stacked azimuth gathers to guarantee the accuracy of input data,and then conduct seismic AVAZ inversion based on the VTI constraints and Bayesian framework to predict anisotropy parameters of the shale gas reservoir in the study area.We further analyze the rock physical relation between anisotropy parameters and fracture compliance and mineral content for quantitative interpretation of seismic inversion results.Research results reveal that the inverted anisotropy parameters are related to P-and S-wave respectively,and thus can be used to distinguish the effect of fracture and fl uids by the joint interpretation.Meanwhile high values of anisotropy parameters correspond to high values of fracture compliance,so the anisotropy parameters can refl ect the development of fractures in reservoir.There is two sets of data from different sources,including the content of brittle mineral quartz obtained from well data and the anisotropy parameters inverted from seismic data,also show the positive correlation.This further indicates high content of brittle mineral makes fractures developing in shale reservoir and enhances seismic anisotropy of the shale reservoir.The inversion results demonstrate the characterization of fractures and brittleness for the Longmaxi shale gas reservoir in the Sichuan Basin.展开更多
With the development of exploration of oil and gas resources,the requirements for seismic inversion results are getting more accurate.In particular,it is hoped that the distribution patterns of oil and gas reservoirs ...With the development of exploration of oil and gas resources,the requirements for seismic inversion results are getting more accurate.In particular,it is hoped that the distribution patterns of oil and gas reservoirs can be finely characterized,and the seismic inversion results can clearly characterize the location of stratigraphic boundaries and meet the needs of accurate geological description.Specifically,for pre-stack AVO inversion,it is required to be able to distinguish smaller geological targets in the depth or time domain,and clearly depict the vertical boundaries of the geological objects.In response to the above requirements,we introduce the preprocessing regularization of the adaptive edge-preserving smooth filter into the pre-stack AVO elastic parameter inversion to clearly invert the position of layer boundary and improve the accuracy of the inversion results.展开更多
Pre-stack seismic inversion is an important method for fluid identification and reservoir characterization in exploration geophysics. In this study, an effective fluid factor is initially established based on Biot por...Pre-stack seismic inversion is an important method for fluid identification and reservoir characterization in exploration geophysics. In this study, an effective fluid factor is initially established based on Biot poroelastic theory, and a pre-stack seismic inversion method based on Bayesian framework is used to implement the fluid identification. Compared with conventional elastic parameters, fluid factors are more sensitive to oil and gas. However, the coupling effect between rock porosity and fluid content is not considered in conventional fluid factors, which may lead to fuzzy fluid identification results. In addition,existing fluid factors do not adequately consider the physical mechanisms of fluid content, such as squirt flow between cracks and pores. Therefore, we propose a squirt fluid factor(SFF) that minimizes the fluid and pore mixing effects and takes into account the squirt flow. On this basis, a novel P-wave reflection coefficient equation is derived, and the squirt fluid factor is estimated by amplitude variation with offset(AVO) inversion method. The new reflection coefficient equation has sufficient accuracy and can be utilized to estimate the parameters. The effectiveness and superiority of the proposed method in fluid identification are verified by the synthetic and field examples.展开更多
An important research topic for prospecting seismology is to provide a fast accurate velocity model from pre-stack depth migration. Aiming at such a problem, we propose a quadratic precision generalized nonlinear glob...An important research topic for prospecting seismology is to provide a fast accurate velocity model from pre-stack depth migration. Aiming at such a problem, we propose a quadratic precision generalized nonlinear global optimization migration velocity inversion. First we discard the assumption that there is a linear relationship between residual depth and residual velocity and propose a velocity model correction equation with quadratic precision which enables the velocity model from each iteration to approach the real model as quickly as possible. Second, we use a generalized nonlinear inversion to get the global optimal velocity perturbation model to all traces. This method can expedite the convergence speed and also can decrease the probability of falling into a local minimum during inversion. The synthetic data and Mamlousi data examples show that our method has a higher precision and needs only a few iterations and consequently enhances the practicability and accuracy of migration velocity analysis （MVA） in complex areas.展开更多
This is a case study of the application of pre-stack inverted elastic parameters to tight-sand reservoir prediction. With the development of oil and gas exploration, pre-stack data and inversion results are increasing...This is a case study of the application of pre-stack inverted elastic parameters to tight-sand reservoir prediction. With the development of oil and gas exploration, pre-stack data and inversion results are increasingly used for production objectives. The pre-stack seismic property studies include not only amplitude verse offset （AVO） but also the characteristics of other elastic property changes. In this paper, we analyze the elastic property parameters characteristics of gas- and wet-sands using data from four gas-sand core types. We found that some special elastic property parameters or combinations can be used to identify gas sands from water saturated sand. Thus, we can do reservoir interpretation and description using different elastic property data from the pre-stack seismic inversion processing. The pre- stack inversion method is based on the simplified Aki-Richard linear equation. The initial model can be generated from well log data and seismic and geologic interpreted horizons in the study area. The input seismic data is angle gathers generated from the common reflection gathers used in pre-stack time or depth migration. The inversion results are elastic property parameters or their combinations. We use a field data example to examine which elastic property parameters or combinations of parameters can most easily discriminate gas sands from background geology and which are most sensitive to pore-fluid content. Comparing the inversion results to well data, we found that it is useful to predict gas reservoirs using λ, λρ, λ/μ, and K/μ properties, which indicate the gas characteristics in the study reservoir.展开更多
Based on the long-wavelength approximation,a set of parallel vertical fractures embedded in periodic thin interbeds can be regarded as an equivalent orthorhombic medium. Rock physics is the basis for constructing the ...Based on the long-wavelength approximation,a set of parallel vertical fractures embedded in periodic thin interbeds can be regarded as an equivalent orthorhombic medium. Rock physics is the basis for constructing the relationship between fracture parameters and seismic response. Seismic scattering is an effective way to inverse anisotropic parameters. In this study,we propose a reliable method for predicting the Thomsen's weak anisotropic parameters and fracture weaknesses in an orthorhombic fractured reservoir using azimuthal pre-stack seismic data. First, considering the influence of fluid substitution in mineral matrix, porosity, fractures and anisotropic rocks, we estimate the orthorhombic anisotropic stiffness coefficients by constructing an equivalent rock physics model for fractured rocks. Further, we predict the logging elastic parameters, Thomsen's weak parameters, and fracture weaknesses to provide the initial model constraints for the seismic inversion. Then, we derive the P-wave reflection coefficient equation for the inversion of Thomsen's weak anisotropic parameters and fracture weaknesses.Cauchy-sparse and smoothing-model constraint regularization taken into account in a Bayesian framework, we finally develop a method of amplitude variation with angles of incidence and azimuth(AVAZ) inversion for Thomsen's weak anisotropic parameters and fracture weaknesses, and the model parameters are estimated by using the nonlinear iteratively reweighted least squares(IRLS) strategy. Both synthetic and real examples show that the method can directly estimate the orthorhombic characteristic parameters from the azimuthally pre-stack seismic data, which provides a reliable seismic inversion method for predicting Thomsen's weak anisotropic parameters and fracture weaknesses.展开更多
Elastic wave inverse scattering theory plays an important role in parameters estimation of heterogeneous media.Combining inverse scattering theory,perturbation theory and stationary phase approximation,we derive the P...Elastic wave inverse scattering theory plays an important role in parameters estimation of heterogeneous media.Combining inverse scattering theory,perturbation theory and stationary phase approximation,we derive the P-wave seismic scattering coefficient equation in terms of fluid factor,shear modulus and density of background homogeneous media and perturbation media.With this equation as forward solver,a pre-stack seismic Bayesian inversion method is proposed to estimate the fluid factor of heterogeneous media.In this method,Cauchy distribution is utilized to the ratios of fluid factors,shear moduli and densities of perturbation media and background homogeneous media,respectively.Gaussian distribution is utilized to the likelihood function.The introduction of constraints from initial smooth models enhances the stability of the estimation of model parameters.Model test and real data example demonstrate that the proposed method is able to estimate the fluid factor of heterogeneous media from pre-stack seismic data directly and reasonably.展开更多
基金We would like to acknowledge the sponsorship of the National Natural Science Foundation of China(42004092,42030103,41974119)Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(Grant No.2021QNLM020001-6)Young Elite Scientists Sponsorship Program by CAST(2021QNRC001).
文摘Classical multi-channel technology can significantly reduce the pre-stack seismic inversion uncertainty, especially for complex geology such as high dipping structures. However, due to the consideration of complex structure or reflection features, the existing multi-channel inversion methods have to adopt the highly time-consuming strategy of arranging seismic data trace-by-trace, limiting its wide application in pre-stack inversion. A fast pre-stack multi-channel inversion constrained by seismic reflection features has been proposed to address this issue. The key to our method is to re-characterize the reflection features to directly constrain the pre-stack inversion through a Hadamard product operator without rearranging the seismic data. The seismic reflection features can reflect the distribution of the stratum reflection interface, and we obtained them from the post-stack profile by searching the shortest local Euclidean distance between adjacent seismic traces. Instead of directly constructing a large-size reflection features constraint operator advocated by the conventional methods, through decomposing the reflection features along the vertical and horizontal direction at a particular sampling point, we have constructed a computationally well-behaved constraint operator represented by the vertical and horizontal partial derivatives. Based on the Alternating Direction Method of Multipliers (ADMM) optimization, we have derived a fast algorithm for solving the objective function, including Hadamard product operators. Compared with the conventional reflection features constrained inversion, the proposed method is more efficient and accurate, proved on the Overthrust model and a field data set.
基金supported by NSFC(41930425)Science Foundation of China University of Petroleum,Beijing(No.2462020YXZZ008)+1 种基金R&D Department of China National Petroleum Corporation(Investigations on fundamental experiments and advanced theoretical methods in geophysical prospecting applications(2022DQ0604-01)the Strategic Cooperation Technology Projects of CNPC and CUPB(ZLZX2020-03)and NSFC(42274142).
文摘Heavy oil has high density and viscosity, and exhibits viscoelasticity. Gassmann's theory is not suitable for materials saturated with viscoelastic fluids. Directly applying such model leads to unreliable results for seismic inversion of heavy oil reservoir. To describe the viscoelastic behavior of heavy oil, we modeled the elastic properties of heavy oil with varying viscosity and frequency using the Cole-Cole-Maxwell (CCM) model. Then, we used a CCoherent Potential Approximation (CPA) instead of the Gassmann equations to account for the fluid effect, by extending the single-phase fluid condition to two-phase fluid (heavy oil and water) condition, so that partial saturation of heavy oil can be considered. This rock physics model establishes the relationship between the elastic modulus of reservoir rock and viscosity, frequency and saturation. The viscosity of the heavy oil and the elastic moduli and porosity of typical reservoir rock samples were measured in laboratory, which were used for calibration of the rock physics model. The well-calibrated frequency-variant CPA model was applied to the prediction of the P- and S-wave velocities in the seismic frequency range (1–100 Hz) and the inversion of petrophysical parameters for a heavy oil reservoir. The pre-stack inversion results of elastic parameters are improved compared with those results using the CPA model in the sonic logging frequency (∼10 kHz), or conventional rock physics model such as the Xu-Payne model. In addition, the inversion of the porosity of the reservoir was conducted with the simulated annealing method, and the result fits reasonably well with the logging curve and depicts the location of the heavy oil reservoir on the time slice. The application of the laboratory-calibrated CPA model provides better results with the velocity dispersion correction, suggesting the important role of accurate frequency dependent rock physics models in the seismic prediction of heavy oil reservoirs.
基金supported by National Basic Research Program(2006CB202304)of Chinaco-supported by the National Basic Research Program of China(Grant No.2011CB201103)the National Science and Technology Major Project of China(Grant No.2011ZX05004003)
文摘The major storage space types in the carbonate reservoir in the Ordovician in the TZ45 area are secondary dissolution caves.For the prediction of caved carbonate reservoir,post-stack methods are commonly used in the oilfield at present since pre-stack inversion is always limited by poor seismic data quality and insufficient logging data.In this paper,based on amplitude preserved seismic data processing and rock-physics analysis,pre-stack inversion is employed to predict the caved carbonate reservoir in TZ45 area by seriously controlling the quality of inversion procedures.These procedures mainly include angle-gather conversion,partial stack,wavelet estimation,low-frequency model building and inversion residual analysis.The amplitude-preserved data processing method can achieve high quality data based on the principle that they are very consistent with the synthetics.Besides,the foundation of pre-stack inversion and reservoir prediction criterion can be established by the connection between reservoir property and seismic reflection through rock-physics analysis.Finally,the inversion result is consistent with drilling wells in most cases.It is concluded that integrated with amplitude-preserved processing and rock-physics,pre-stack inversion can be effectively applied in the caved carbonate reservoir prediction.
基金supported by the National Science and Technology Major Project(No.2016ZX05047-002-001)
文摘Joint PP–PS inversion offers better accuracy and resolution than conventional P-wave inversion. P-and S-wave elastic moduli determined through data inversions are key parameters for reservoir evaluation and fluid characterization. In this paper, starting with the exact Zoeppritz equation that relates P-and S-wave moduli, a coefficient that describes the reflections of P-and converted waves is established. This method effectively avoids error introduced by approximations or indirect calculations, thus improving the accuracy of the inversion results. Considering that the inversion problem is ill-posed and that the forward operator is nonlinear, prior constraints on the model parameters and modified low-frequency constraints are also introduced to the objective function to make the problem more tractable. This modified objective function is solved over many iterations to continuously optimize the background values of the velocity ratio, which increases the stability of the inversion process. Tests of various models show that the method effectively improves the accuracy and stability of extracting P and S-wave moduli from underdetermined data. This method can be applied to provide inferences for reservoir exploration and fluid extraction.
基金supported by the National Natural Science Foundation of China(No.41574130,41874143 and 41374134)the National Science and Technology Major Project of China(No.2016ZX05014-001-009)the Sichuan Provincial Youth Science&Technology Innovative Research Group Fund(No.2016TD0023)
文摘The extensive application of pre-stack depth migration has produced huge volumes of seismic data,which allows for the possibility of developing seismic inversions of reservoir properties from seismic data in the depth domain.It is difficult to estimate seismic wavelets directly from seismic data due to the nonstationarity of the data in the depth domain.We conduct a velocity transformation of seismic data to make the seismic data stationary and then apply the ridge regression method to estimate a constant seismic wavelet.The estimated constant seismic wavelet is constructed as a set of space-variant seismic wavelets dominated by velocities at different spatial locations.Incorporating the weighted superposition principle,a synthetic seismogram is generated by directly employing the space-variant seismic wavelets in the depth domain.An inversion workflow based on the model-driven method is developed in the depth domain by incorporating the nonlinear conjugate gradient algorithm,which avoids additional data conversions between the time and depth domains.The impedance inversions of the synthetic and field seismic data in the depth domain show good results,which demonstrates that seismic inversion in the depth domain is feasible.The approach provides an alternative for forward numerical analyses and elastic property inversions of depth-domain seismic data.It is advantageous for further studies concerning the stability,accuracy,and efficiency of seismic inversions in the depth domain.
基金supported by the National Key S&T Special Project of China(No.2017ZX05049-002)the NSFC and Sino PEC Joint Key Project(No.U1663207)the National Natural Science Foundation of China(No.41430322)
文摘Seismic AVAZ inversion method based on an orthorhombic model can be used to invert anisotropy parameters of the Longmaxi shale gas reservoir in the Sichuan Basin..As traditional seismic inversion workfl ow does not suffi ciently consider the infl uence of fracture orientation,we predict fracture orientation using the method based on the Fourier series to correct pre-stacked azimuth gathers to guarantee the accuracy of input data,and then conduct seismic AVAZ inversion based on the VTI constraints and Bayesian framework to predict anisotropy parameters of the shale gas reservoir in the study area.We further analyze the rock physical relation between anisotropy parameters and fracture compliance and mineral content for quantitative interpretation of seismic inversion results.Research results reveal that the inverted anisotropy parameters are related to P-and S-wave respectively,and thus can be used to distinguish the effect of fracture and fl uids by the joint interpretation.Meanwhile high values of anisotropy parameters correspond to high values of fracture compliance,so the anisotropy parameters can refl ect the development of fractures in reservoir.There is two sets of data from different sources,including the content of brittle mineral quartz obtained from well data and the anisotropy parameters inverted from seismic data,also show the positive correlation.This further indicates high content of brittle mineral makes fractures developing in shale reservoir and enhances seismic anisotropy of the shale reservoir.The inversion results demonstrate the characterization of fractures and brittleness for the Longmaxi shale gas reservoir in the Sichuan Basin.
基金support of China national key project 41904130 and key research project 041020080060.
文摘With the development of exploration of oil and gas resources,the requirements for seismic inversion results are getting more accurate.In particular,it is hoped that the distribution patterns of oil and gas reservoirs can be finely characterized,and the seismic inversion results can clearly characterize the location of stratigraphic boundaries and meet the needs of accurate geological description.Specifically,for pre-stack AVO inversion,it is required to be able to distinguish smaller geological targets in the depth or time domain,and clearly depict the vertical boundaries of the geological objects.In response to the above requirements,we introduce the preprocessing regularization of the adaptive edge-preserving smooth filter into the pre-stack AVO elastic parameter inversion to clearly invert the position of layer boundary and improve the accuracy of the inversion results.
基金the sponsorship of National Natural Science Foundation of China (41974119, 42030103)Science Foundation from Innovation and Technology Support Program for Young Scientists in Colleges of Shandong Province and Ministry of Science and Technology of China (2019RA2136)Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology (Qingdao) (2021QNLM020001-6)。
文摘Pre-stack seismic inversion is an important method for fluid identification and reservoir characterization in exploration geophysics. In this study, an effective fluid factor is initially established based on Biot poroelastic theory, and a pre-stack seismic inversion method based on Bayesian framework is used to implement the fluid identification. Compared with conventional elastic parameters, fluid factors are more sensitive to oil and gas. However, the coupling effect between rock porosity and fluid content is not considered in conventional fluid factors, which may lead to fuzzy fluid identification results. In addition,existing fluid factors do not adequately consider the physical mechanisms of fluid content, such as squirt flow between cracks and pores. Therefore, we propose a squirt fluid factor(SFF) that minimizes the fluid and pore mixing effects and takes into account the squirt flow. On this basis, a novel P-wave reflection coefficient equation is derived, and the squirt fluid factor is estimated by amplitude variation with offset(AVO) inversion method. The new reflection coefficient equation has sufficient accuracy and can be utilized to estimate the parameters. The effectiveness and superiority of the proposed method in fluid identification are verified by the synthetic and field examples.
基金This work is supported by National Natural Science Foundation of China （Grant No.40839905）.
文摘An important research topic for prospecting seismology is to provide a fast accurate velocity model from pre-stack depth migration. Aiming at such a problem, we propose a quadratic precision generalized nonlinear global optimization migration velocity inversion. First we discard the assumption that there is a linear relationship between residual depth and residual velocity and propose a velocity model correction equation with quadratic precision which enables the velocity model from each iteration to approach the real model as quickly as possible. Second, we use a generalized nonlinear inversion to get the global optimal velocity perturbation model to all traces. This method can expedite the convergence speed and also can decrease the probability of falling into a local minimum during inversion. The synthetic data and Mamlousi data examples show that our method has a higher precision and needs only a few iterations and consequently enhances the practicability and accuracy of migration velocity analysis （MVA） in complex areas.
基金supported by the National Basic Priorities Program "973" Project (Grant No.2007CB209600)China Postdoctoral Science Foundation Funded Project
文摘This is a case study of the application of pre-stack inverted elastic parameters to tight-sand reservoir prediction. With the development of oil and gas exploration, pre-stack data and inversion results are increasingly used for production objectives. The pre-stack seismic property studies include not only amplitude verse offset （AVO） but also the characteristics of other elastic property changes. In this paper, we analyze the elastic property parameters characteristics of gas- and wet-sands using data from four gas-sand core types. We found that some special elastic property parameters or combinations can be used to identify gas sands from water saturated sand. Thus, we can do reservoir interpretation and description using different elastic property data from the pre-stack seismic inversion processing. The pre- stack inversion method is based on the simplified Aki-Richard linear equation. The initial model can be generated from well log data and seismic and geologic interpreted horizons in the study area. The input seismic data is angle gathers generated from the common reflection gathers used in pre-stack time or depth migration. The inversion results are elastic property parameters or their combinations. We use a field data example to examine which elastic property parameters or combinations of parameters can most easily discriminate gas sands from background geology and which are most sensitive to pore-fluid content. Comparing the inversion results to well data, we found that it is useful to predict gas reservoirs using λ, λρ, λ/μ, and K/μ properties, which indicate the gas characteristics in the study reservoir.
文摘Based on the long-wavelength approximation,a set of parallel vertical fractures embedded in periodic thin interbeds can be regarded as an equivalent orthorhombic medium. Rock physics is the basis for constructing the relationship between fracture parameters and seismic response. Seismic scattering is an effective way to inverse anisotropic parameters. In this study,we propose a reliable method for predicting the Thomsen's weak anisotropic parameters and fracture weaknesses in an orthorhombic fractured reservoir using azimuthal pre-stack seismic data. First, considering the influence of fluid substitution in mineral matrix, porosity, fractures and anisotropic rocks, we estimate the orthorhombic anisotropic stiffness coefficients by constructing an equivalent rock physics model for fractured rocks. Further, we predict the logging elastic parameters, Thomsen's weak parameters, and fracture weaknesses to provide the initial model constraints for the seismic inversion. Then, we derive the P-wave reflection coefficient equation for the inversion of Thomsen's weak anisotropic parameters and fracture weaknesses.Cauchy-sparse and smoothing-model constraint regularization taken into account in a Bayesian framework, we finally develop a method of amplitude variation with angles of incidence and azimuth(AVAZ) inversion for Thomsen's weak anisotropic parameters and fracture weaknesses, and the model parameters are estimated by using the nonlinear iteratively reweighted least squares(IRLS) strategy. Both synthetic and real examples show that the method can directly estimate the orthorhombic characteristic parameters from the azimuthally pre-stack seismic data, which provides a reliable seismic inversion method for predicting Thomsen's weak anisotropic parameters and fracture weaknesses.
基金supported by the National Basic Research Program of China(Grant No.2013CB228604)the National Grand Project for Science and Technology(Grant Nos.2011ZX05030-004-002,2011ZX05019-003&2011ZX05006-002)
文摘Elastic wave inverse scattering theory plays an important role in parameters estimation of heterogeneous media.Combining inverse scattering theory,perturbation theory and stationary phase approximation,we derive the P-wave seismic scattering coefficient equation in terms of fluid factor,shear modulus and density of background homogeneous media and perturbation media.With this equation as forward solver,a pre-stack seismic Bayesian inversion method is proposed to estimate the fluid factor of heterogeneous media.In this method,Cauchy distribution is utilized to the ratios of fluid factors,shear moduli and densities of perturbation media and background homogeneous media,respectively.Gaussian distribution is utilized to the likelihood function.The introduction of constraints from initial smooth models enhances the stability of the estimation of model parameters.Model test and real data example demonstrate that the proposed method is able to estimate the fluid factor of heterogeneous media from pre-stack seismic data directly and reasonably.
