Complex Precipitation Mechanism of Ti-Nb-V Microalloyed Bainitic Base High Strength Steel

The addition of high Ti(>0.1%) in microalloyed bainitic high strength steel was designed, and the precipitation morphology of steels with different Ti, Nb, and V contents was studied by utilizing transmission electron microscopy(TEM). Based on the classical nucleation-crystal growth theory and the Johnson-Mehl-Avrami equation, the precipitation thermodynamic and kinetic model of second phase particles in austenite was established in the form of(Nbx,Vy,Tiz)C, and the complex precipitation mechanism of second phase particles was emphatically studied. The experimental results show that the complex precipitation particles could be divided into two categories: the coarser particles with about 100 nm grain size and the independent complex precipitation particles in the form of(Nb,V,Ti)C with 35-50 nm grain size. The latter has a better precipitation strengthening effect, and the calculated PTT curve shows a typical "C" shape. When the deformed storage energy is 3 820 J·mol^-1, the fastest precipitation temperature of calculated PTT curve is 925℃, and the calculated result is essentially consistent with experimental values. The increase of Ti content increased the nose point temperature and expanded the range of fastest precipitation temperature.

Properties,Microstructures and Precipitate Morphology of Hot-rolled Interstital-Free(IF)Steel Sheets

In order to simplify production process and to decrease production cost of thicker cold-rolled iF steel sheets for deep drawing applications, a new hot-rolled IF steel sheet is developed through hot-rolling in or region. In this paper, properties, microstructures and precipitate morphology of hot-rolled iF steel sheets are described..

Variant selection map of external load during Ni_(4)Ti_(3)precipitation in nitinol:a theoretical and phase field study

The morphology of Ni_(4)Ti_(3)precipitates is important in tuning the martensitic transformation(MT)behavior and mechanical properties of nitinol.Constrained ageing is effective in engineering the morphology of Ni_(4)Ti_(3)precipitates due to the variant selection effect of external load which is still lacking.In this work,maps of variant selection effect of external load applied along all crystallographic directions are obtained by using a combination of theoretical analyses and phase field simulations.It is found that maps produced by uniaxial tension and uniaxial compression are quite different.The number and types of Ni_(4)Ti_(3)variants preferred by external load vary as the loading direction changes.Moreover,factors influencing the strength of variant selection effect are discovered.This work provides insights on understanding the Ni_(4)Ti_(3)precipitation process and sheds light on the engineering of morphology of Ni_(4)Ti_(3)precipitates for desired mechanical and functional properties.

Relationship Between the Strengthening Effect and the Morphology of Precipitates in Al–7.4Zn–1.7Mg–2.0Cu Alloy

The morphological evolution of the precipitates in Al–7.4Zn–1.7Mg–2.0Cu（wt%） alloy was studied by highresolution transmission electron microscopy（HRTEM）. Statistics reveal that the hardness of the alloy changes accordingly with the change of the average thickness–diameter ratio of precipitates. The GPII zones are mainly responsible for the first and also the highest hardness peak. They grow in diameter and keep 7-atomic-layer in thickness. Once the thickness changes, the phase transformation from GPII zone to g0 or g-precursor would occur. The resultant metastable g0 and g-precursor precipitates grow in both diameter and thickness, but much faster in the former. After the first hardness peak,the metastable g0 precipitates and g-precursor, coexisting with part of GPII zones, are counted as the main hardening precipitates.